Numerical Analysis and Scientific Computing Commons^™

Simulation On A Car-Following Strategy For Adaptive Cruise Control System, Zhiqiang Zhai, Jinliang Xu, Yuan Hao, Yongming Zhou, Longfei Zhao, Shiqian Wang

Journal of System Simulation

Abstract: A car-following strategy based on the variable distance is proposed to improve the applicability of the ACC (Adaptive cruise control) system. The curvature radius of centroid trajectory of the host vehicle is computed by the kinetic model based on the unscented Kalman filter. In order to identify the car-following object, a vehicle tracking model is presented according to the relative kinetic states between the front vehicle and the host vehicle. The ACC system adjust the velocity of the host vehicle to control the safe distance between the host vehicle and the object vehicle. A complex condition with the lane-changing …

Research On Sliding Mode Control Of Robotic Arm Based On Fractional Calculus, Zhang Xin, Jiaxin Li

Journal of System Simulation

Abstract: An effective fractional order sliding mode control method is proposed for the nonlinear and uncertain robotic arm system by combining the advantages of the fractional calculus theory and the sliding mode control strategy. In the design of the controller, the fractional calculus is introduced into the sliding mode control by using the fractional order reaching law and the fractional order sliding mode control law respectively, and is proved by the Lyapunov theory to ensure the stability of the system. The proposed control method is applied to a two-joint robotic arm and is verified by the MATLAB simulation software. The …

Optimization Design And Locomotion Characteristics Analysis Of Wheeled Traction Robot, Wu Wei, Li Bo, Nana Liu, Guangzhi Ma

Journal of System Simulation

Abstract: To evaluate quantitatively the dynamic locomotion characteristics and obstacle performance of the wheeled traction robot in horizontal well with single pipe diameter, the mechanical model of the crawling module of the wheeled traction robot is established and the structural and size parameters are optimized. The ADAMS model of the current robot is presented, and the Simulink models of three parts of the driving module, supporting mechanism and traction resistance are built. A specified method of the ADAMS/Simulink joint simulation modeling is proposed to analyze the locomotion characteristics and obstacle performance of the wheeled traction robot. The simulation results …

Prediction Of Flight Taxi-Out Time In A Busy Airport Based On Lwsvr, Zhiwei Xing, Songyue Jiang, Luo Qian, Luo Xiao

Journal of System Simulation

Abstract: Aiming at improving the accuracy of predicting the flight taxi-out time in a busy airport, based on the local regression and weighted support vector regression, a prediction model of the locally weighted support vector regression is proposed. The model uses the K nearest neighbor method to reduce the capacity of the training sample set and build a predictive model for each predicted sample. The bandwidth parameter of the Gaussian weighting function is optimized with the Mahalanobis distance between the forecast sample and training samples, and the weighting coefficients are obtained. Combining the airport departure flight data in simulation analysis, …

Research On Failure Modes Analysis Based On Weighted Evidence Theory, Lulu Shao, Jihong Han, Niu Kan, Xiaohu Liu, Shao Fang

Journal of System Simulation

Abstract: Aiming at the risk priority numbers of different failure modes being equal and the criticality of the fault modes changing greatly due to the tiny change of the risk parameters, a method of the failure modes analysis based on the weighted evidence theory is proposed from the perspective of the methodology of dealing with the uncertainty problem. The method qualifies the epistemic uncertainty existing in the expert evaluation of the risk parameters into the basic belief assignment and expert attribute weight respectively, and the information propagation and processing of the epistemic uncertainty is solved, and the ordered arrangement …

Design And Implementation Of Reconfigurable Video Array Processor Test Platform, Jiang Lin, Feilong He, Shan Rui, Wang Shuai, Haoyue Wu, Wu Xin

Journal of System Simulation

Abstract: Aiming at the design requirements of the reconfigurable video array processor and the problem of traditional method testing the video codec system with slow speed, low precision and poor observability. A Qt-based user interface is developed, and a hardware-software co-testing platform based on FPGA is designed and implemented. The platform realizes the data transmission and image reproduction based on the software simulation on the PC side, and the parallel mapping of the video encoding and decoding algorithms based on the reconfigurable video array processor on the FPGA side. The experiment results show that the data can be transmitted correctly …

Design Of Virtual Training System For Horizontally Oriented Drill Based On Unity3d, Guojun Wen, Xia Yu, Yudan Wang, Zifei Hu, Wu Dan

Journal of System Simulation

Abstract: Aiming at the equipment shortage, serious resource loss and hidden dangers in traditional horizontally oriented drilling rig training, a design scheme of the horizontally oriented drilling rig virtual training system based on the Unity3D is proposed. An experimental platform is built to verify the feasibility. The solidworks, 3dsMax model construction, Unity3D software virtual animation and scene development, Rodrigues rotation matrix 3D trajectory algorithm derivation, data acquisition (DAQ), system software and hardware communication and other technical content are used in the program. The experimental results show that the scheme is feasible, the system has the good operability and true immersion …

Force/Position Hybrid Control Method For Surface Parts Polishing Robot, Yufeng Ding, Xinpu Min

Journal of System Simulation

Abstract: A force/position hybrid control method for polishing the complex surface with an industrial robot is put forward. The method can achieve the stable force control and precise position control to ensure the consistency of the material removal rate at different normal vectors. After the trajectory of the normal vector is planned in CAD software, the force signal feedback from the sensor and the PI controller in the normal vector direction are combined,and the robot end tool corrects the motion trajectory in the vector direction of the surface to indirectly control the contact force between the tool and the surface. …

Application Of Improved Inverse Decoupling Active Disturbance Rejection Internal Model Control In Grinding, Zhou Ying, Qiaojuan Jia, Zhang Yan, Mingxin Chang

Journal of System Simulation

Abstract: Aiming at the characteristics of the multivariable, strong coupling and large time delay of the grinding classification system, the improved inverse decoupling active disturbance rejection internal model control method is proposed. The inverse decoupling method is used to realize the decoupling of the grinding classification system, and the improved internal model control and linear active disturbance rejection control are adopted for the decoupled subsystem. By introducing the internal model compensator and the gain to compensate the time delay, the dependence of the system upon the model is reduced .The model mismatch, external disturbance and uncertainties are suppressed by adjusting …

Simulation And Analysis Of Kinematic Parameters Of Vehicle Offset And Rear-End Collision Accident, Wenhui Zhang, Yongmin Su, Shurui Sun

Journal of System Simulation

Abstract: In order to deeply study the motion behavior of vehicles in the rear-end collision, a vehicle rear end collision accident model is established in the PC-Crash simulation environment. Considering with the relative velocity, offset, speed of the rear-end vehicle and wheel angle, the acceleration, yaw angle and yaw rate of the vehicle are obtained. The research results show that when the bias degree is 20%, the yaw angles of the rear-end vehicle and rear tracked vehicle is the biggest, and is easy to induce the secondary accidents such as rollover and fixtures crash. The larger the relative …

Modeling And Simulation For Prevention And Control Of Drug Abuse And Drug-Related Crime Based On System Dynamics, Liu Feng

Journal of System Simulation

Abstract: In the existing drug abuse dynamics models, the drug users are assumed to be permanent immune to drugs after rehabilitation and the possibility of the recovery drug users being susceptible again is neglected. To solve the problem, through the system dynamics (SD) method, the evolution process of the drug-related crowds is analyzed, and a relevant model based on the transient immunity is constructed. The trends of the drug abuse and drug-related crime are predicted by the simulation experiments, and the sensitivity analysis indicates that the rate of contact and exposure to drugs is the most sensitive factor of the …

Two-Stage Dynamic Emergency And Disaster Resistance Operation Strategy For Active Distribution Network, Zhang Wei, Li Quan, Yuqiu Zhou, Yuhang Luo, Peifeng Xi

Journal of System Simulation

Abstract: The persistence and gradual change of the typhoons and other dynamic disasters, increase the complexity of the fault recovery process. In order to quickly restore the power to the active distribution network, a two-stage dynamic emergency operational strategy is proposed and the corresponding overall optimization model is established. The strategy includes the resource allocation plan, island partition scheme and cooperative scheme of the emergency repair and restoration. In the first stage, the pre-disaster resource allocation plan is made according to the travel time and attribute matching situation between the disaster-stricken areas and the repair resources. In the second stage, …

Model And Simulation Of Interactive Dissemination Of Multiple Public Opinion Information Under Government Intervention, Zhiying Wang, Weikang Wang, Chaolong Yue

Journal of System Simulation

Abstract: In order to identify the interactive dissemination rules of the multiple public opinion information (POI) in major emergencies and make the intervention decisions more pertinently, an intervention model of interactive dissemination is proposed. The model integrates the characteristics of the unequal competition of multiple POI, expands the existing intervention model of the single POI dissemination, and could analyze the intervention measures from the global perspective of the interactive dissemination. Case analysis and simulation results show that the proposed model could well simulate the evolution of the interactive transmission of the multiple POI. Although the strong POI is more harmful …

Research On Dynamic Editable Method For Combat Simulation Model Combination, Wu Wei

Journal of System Simulation

Abstract: Focus on the low flexibility, interactivity and maneuverability of the combat simulation system, a dynamic editing method for the simulation model combination is proposed. This method is based on the technology of dynamic design of model combination, dynamic editing of simulation model combination and visual programming, which using the Interface-oriented and face-cut design in the model design to realize the flexible and high efficient combat modeling and simulation. A military ship model is designed as the experimental case, in which the feasibility and effectiveness of the proposed method are discussed and verified. The experiment results demonstrate that the method …

Synergistic Use Of Remote Sensing And Modeling For Estimating Net Primary Productivity In The Red Sea With Vgpm, Eppley-Vgpm, And Cbpm Models Intercomparison, Wenzhao Li, Surya Prakash Tiwari, Hesham El-Askary, Mohamed Ali Qurban, Vassilis Amiridis, K. P. Manikandan, Michael J. Garay, Olga V. Kalashnikova, Thomas C. Piechota, Daniele C. Struppa

Mathematics, Physics, and Computer Science Faculty Articles and Research

Primary productivity (PP) has been recently investigated using remote sensing-based models over quite limited geographical areas of the Red Sea. This work sheds light on how phytoplankton and primary production would react to the effects of global warming in the extreme environment of the Red Sea and, hence, illuminates how similar regions may behave in the context of climate variability. study focuses on using satellite observations to conduct an intercomparison of three net primary production (NPP) models--the vertically generalized production model (VGPM), the Eppley-VGPM, and the carbon-based production model (CbPM)--produced over the Red Sea domain for the 1998-2018 time period. …

Decision Tree For Predicting The Party Of Legislators, Afsana Mimi

Publications and Research

The motivation of the project is to identify the legislators who voted frequently against their party in terms of their roll call votes using Office of Clerk U.S. House of Representatives Data Sets collected in 2018 and 2019. We construct a model to predict the parties of legislators based on their votes. The method we used is Decision Tree from Data Mining. Python was used to collect raw data from internet, SAS was used to clean data, and all other calculations and graphical presentations are performed using the R software.

Shakespeare In The Eighteenth Century: Algorithm For Quotation Identification, Marion Pauline Chiariglione

Graduate Theses and Dissertations

Quoting a borrowed excerpt of text within another literary work was infrequently done prior to the beginning of the eighteenth century. However, quoting other texts, particularly Shakespeare, became quite common after that. Our work develops automatic approaches to identify that trend. Initial work focuses on identifying exact and modified sections of texts taken from works of Shakespeare in novels spanning the eighteenth century. We then introduce a novel approach to identifying modified quotes by adapting the Edit Distance metric, which is character based, to a word based approach. This paper offers an introduction to previous uses of this metric within …

An Fpga-Based Hardware Accelerator For The Digital Image Correlation Engine, Keaten Stokke

Graduate Theses and Dissertations

The work presented in this thesis was aimed at the development of a hardware accelerator for the Digital Image Correlation engine (DICe) and compare two methods of data access, USB and Ethernet. The original DICe software package was created by Sandia National Laboratories and is written in C++. The software runs on any typical workstation PC and performs image correlation on available frame data produced by a camera. When DICe is introduced to a high volume of frames, the correlation time is on the order of days. The time to process and analyze data with DICe becomes a concern when …

Predicting Disease Progression Using Deep Recurrent Neural Networks And Longitudinal Electronic Health Record Data, Seunghwan Kim

McKelvey School of Engineering Graduate Student Theses & Dissertations

Electronic Health Records (EHR) are widely adopted and used throughout healthcare systems and are able to collect and store longitudinal information data that can be used to describe patient phenotypes. From the underlying data structures used in the EHR, discrete data can be extracted and analyzed to improve patient care and outcomes via tasks such as risk stratification and prospective disease management. Temporality in EHR is innately present given the nature of these data, however, and traditional classification models are limited in this context by the cross-sectional nature of training and prediction processes. Finding temporal patterns in EHR is especially …

Polyhedral+Dataflow Graphs, Eddie C. Davis

Boise State University Theses and Dissertations

This research presents an intermediate compiler representation that is designed for optimization, and emphasizes the temporary storage requirements and execution schedule of a given computation to guide optimization decisions. The representation is expressed as a dataflow graph that describes computational statements and data mappings within the polyhedral compilation model. The targeted applications include both the regular and irregular scientific domains.

The intermediate representation can be integrated into existing compiler infrastructures. A specification language implemented as a domain specific language in C++ describes the graph components and the transformations that can be applied. The visual representation allows users to reason about …

Development Of Fully Balanced Ssfp And Computer Vision Applications For Mri-Assisted Radiosurgery (Mars), Jeremiah Sanders

Dissertations and Theses (Open Access)

Prostate cancer is the second most common cancer in men and the second-leading cause of cancer death in men. Brachytherapy is a highly effective treatment option for prostate cancer, and is the most cost-effective initial treatment among all other therapeutic options for low to intermediate risk patients of prostate cancer. In low-dose-rate (LDR) brachytherapy, verifying the location of the radioactive seeds within the prostate and in relation to critical normal structures after seed implantation is essential to ensuring positive treatment outcomes.

One current gap in knowledge is how to simultaneously image the prostate, surrounding anatomy, and radioactive seeds within the …

Knot Flow Classification And Its Applications In Vehicular Ad-Hoc Networks (Vanet), David Schmidt

Electronic Theses and Dissertations

Intrusion detection systems (IDSs) play a crucial role in the identification and mitigation for attacks on host systems. Of these systems, vehicular ad hoc networks (VANETs) are difficult to protect due to the dynamic nature of their clients and their necessity for constant interaction with their respective cyber-physical systems. Currently, there is a need for a VANET-specific IDS that meets this criterion. To this end, a spline-based intrusion detection system has been pioneered as a solution. By combining clustering with spline-based general linear model classification, this knot flow classification method (KFC) allows for robust intrusion detection to occur. Due its …

Multi-Objective Signal Timing Optimal Model For Rural-Urban Fringe Area Intersection, Xiaoyu Zhang, Chunfu Shao

Journal of System Simulation

Abstract: With the acceleration of the urbanization process in our country, the road traffic problems in the urban-rural fringe area are becoming serious. In order to improve the traffic efficiency, environmental benefits and traffic safety, a multi-objective optimal model for signal timing is established under the comprehensive consideration of several factors, such as the delay, capacity, number of stops and vehicle emissions. The genetic algorithm is used to solve the problem. A typical intersection is taken as the example for the analysis and the improved design schemes can be achieved and evaluated by the road traffic simulation. The …

Lightmap-Based Gi Collaborative Rendering System For Web3d Application, Shao Wei, Liu Chang, Jinyuan Jia

Journal of System Simulation

Abstract: For the real-time dynamic lighting rendering in low-end web environment, a view-independent collaborative real-time rendering system is presented. The whole system consists of a cloud renderer which produces the global illumination, a web renderer which computes the local illumination, and a scalable collaboration solution which takes the user behavior into account to adjust the range and frequency of the lighting computation. The cloud renderer computes the lighting data into the Lightmap, streams the Lightmap to the web client. After computing the direct light, the web renderer achieves the global illumination information by Sampling the Lightmap, and shows the …

Research On Modeling And Analyzing Method Of Task-Oriented Network Information System Of Systems, Zhu Tao, Weitai Liang, Songhua Huang, Jieyong Zhang

Journal of System Simulation

Abstract: As the catalyst and fusion agent of the system combat capability in the information age, the network information system of systems has been changing the form of information-based warfare and the mode of combat effectiveness generation. On the basis of studying the concept of the network information system of systems and introducing association mapping rules between tasks and systems, a new modeling and analyzing method of the network information system of systems with two dimensions and four networks, based on super-network and service-oriented characteristics, is proposed. The definitions of services information flow motif delay, the task execution accuracy …

Thinking On Digital Twin For Weapon System, Junhua Zhou, Junjie Xue, Heyu Li, Ji Hang, Tingyu Lin, Guoqiang Shi

Journal of System Simulation

Abstract: The main development process of the digital twin technology is reviewed and its necessity for the weapon system is put forward. The definition and composition of the digital twin for the weapon system is given and its application architecture and key technologies, such as the construction of the digital thread, bi-directional collaborative simulation and control, intelligent autonomous evolution, digital twin operation support based on the container-simulation-cloud, et al, are analyzed. The preliminary research and practice of some key technologies is expounded, and the future research directions are summarized and looked forward to.

Modeling And Propeller Location Optimization For Diving Propeller Vehicle, Jianjun Zhang, Yang Bing, Jinhui Wu, Yan Qiang

Journal of System Simulation

Abstract: Focus on the rapid physical exertion and the poor flexibility of diving propeller vehicle, a wearable diving propeller equipped with buoyancy control devices is proposed, and the position of the propeller in the device is optimized. The human body structure is regarded as a rigid body to establish a spatial 6-degree-of-freedom motion equation, and its surrounding hydrodynamic performance is analyzed. The hydrodynamic parameters in the model are obtained based on the FLUENT. The propeller position optimization model based on the minimum external force of rectilinear diving and slewing motions is established. The optimization results demonstrate that the optimized …

Research On Image Description Method Based On Neural Network, Kong Rui, Xie Wei, Lei Tai

Journal of System Simulation

Abstract: The automatic recognition and automatically describing image content is an important research direction to the artificial intelligence to connect the computer vision and the natural language processing. A method of describing the image content is proposed to generate the natural language by using the deep neural network model. The model consists of a convolutional neural network (CNN) and a recurrent neural network (RNN). The CNN is used to extract features of the input image to generate a fixed-length feature vector, which initializes the RNN to generate the sentences. Experimental results on the MSCOCO image description dataset show the syntactic …

Multi-Objective Dynamic Programming Algorithm Of Energy-Efficient Scheduling For Tow-Train, Xinyan Zhang, Yuqing Zhou

Journal of System Simulation

Abstract: To balance the performance and energy consumption of the mixed-model assembly lines effectively, a multi-objective energy-saving scheduling method for the tow-train is proposed. The energy-saving objective is introduced into the traditional material handling scheduling model for the tow-train and a multi-objective mixed integer programming model is constructed with two objective functions of minimizing the maximum line-side inventory and the total energy consumption. A forwards multi-objective dynamic programming based on the time window and dominance rules is presented to obtain the Pareto solutions: the definition for new states is given to obtain the Markov property, the time window and dominance …

Design Of Space-Based Surveillance Distributed Simulation System For Space Targets, Zhang Yang, Qingbo Gan, Yuan Hong, Jiangliang Fu, Chengming Sun

Journal of System Simulation

Abstract: Following the wide application of the HLA in the aerospace system simulation, the space-based surveillance distributed simulation system for the space targets based on the HLA is designed. In the infrastructure design level, the hierarchical structure including data layer, model layer and mission layer are designed. In the system design level, the simulation control members, space-based surveillance member, space target member, optical payload member, and visual simulation member are divided and confirmed. The orbit dynamics and maneuvering model, attitude dynamics and control model, payload pointing and optical imaging model are established. In system implement level, the …