Manufacturing Commons^™

Door Barricade, Alex Cerino

Williams Honors College, Honors Research Projects

My senior capstone project will be a door barricade. The main idea for the use of the door barricade is for schools in the case of an intruder. The barricade that I will be designing is a solution to the inefficient barricades that I saw at my high school. It could also be used at businesses and homes. My design would be easy to use and have a fail-safe option. The two areas of mechanical engineering technology that my capstone project will focus on are stress analysis and electronics. Every part for my door barricade is drawn in SolidWorks. All …

Additive Manufactured Formula Sae Brake Caliper, Auston Obringer, Robert Kucera, Steven Massarelli, Jared John, Michael Finer

Williams Honors College, Honors Research Projects

In a world where innovation has become the new norm, automobiles can often be found at the forefront of that movement. Each and every year there are new innovations and concepts that push modern day technology to the edge of what is physically possible. This can be seen from every aspect of these automobiles ranging from the conceptual stage all the way to production.

Most of these advancements have been made possible with the new technology that has become available on the manufacturing side of the designs. Instead of being constrained by what is possible on your average 3 to …

Sae Formula Team Carbon Fiber Seat, Sean Turner, Jacob Jaksic

Williams Honors College, Honors Research Projects

This project is for the Formula SAE Zips Racing team here at the University of Akron. The team includes Jacob Jaksic, Sean Turner, Dovydas Sodys, Mike White, and Sevin Johnson. We are tasked with reducing the weight of their current seat, while remaining comfortable to the driver. Our plan was to do this with a lightweight material, specifically carbon fiber. Many different steps were required when outlining this project: finalizing a design with verification from our Zips racing advisor, completing FEA analysis on finished design, acquiring material to be molded into seat, and finding a company to fabricate out of …

Design And Analysis Of One-Piece 10” Carbon Fiber Wheels For Zips Racing Zr20 Formula Sae Racecar, Patrick Kruse, Henry J. Wathen, Jordan J. Hyde, Nicholas D. Dobben, Jordan D. Blake

Williams Honors College, Honors Research Projects

Reducing the weight of a vehicle in racing can substantially improve the vehicle dynamics and general performance capabilities. More specifically, the reduction of the unsprung corner weight can provide noticeable performance gains in handling and responsiveness, leading to a quicker, more agile car due to a lower yawing moment of inertia. Unsprung weight reduction also improves the car’s ability to maintain contact between the tires and the road surface for a more consistent grip. In this project we identified the loads that act on the wheel rims according to the data collected from the sensors in the car’s suspension, and …

The Investigation Of The Underlying Microstructure Associated With Fracture Features In 6061 Cold Sprayed Aluminum, Justin White

UNF Graduate Theses and Dissertations

Cold gas dynamic spraying commonly known as cold spray is a process currently used for restoration, re-tolerancing, and application of coatings. With additional resources allocated towards the development of a through process model aimed at predicting the properties of bulk material produced via the Cold Spray process, more lab testing and investigation must be done to capture the effects of the varying microstructure in CS materials. The properties of ultra-fine-grained materials are derived from data collected from coarse grained materials and processes that do not accurately capture the effects as elevated strain rates and ultra-fine-grained materials. The lack of property …

Hydraulic Vehicle Challenge, Jacob Steiner, David Kotovets, Evan Blitz, Luke Fetherston, Alex Colucy

Williams Honors College, Honors Research Projects

The target goal of this project is for a team of students to design a vehicle which is based on human power as the primary mover of the system and achieves vehicle propulsion through the required use of hydraulics and pneumatics. In summary, the rider will power a pump that will generate pressure in order to move the fluid that drives the motor. This will result in the powered rotation of the wheels. As there are many possible designs, naturally, this means that the final design for the vehicle will have specific limitations such as weight and the required use …

Entertainment 721, Mark Hendricks, Noah John, Jadon Vanyo, Chelsea Payne

Williams Honors College, Honors Research Projects

The goal of this project was to design a luxury, aesthetically pleasing entertainment system with a TV lift mechanism that could be remote controlled. The design would also include a cooling cabinet for gaming systems, a remote locking system, and additional storage. Using a morphological chart and weighted decision matrix for each subsystem key features were determined to be included in the design. Several performance benchmarks were determined to accomplish the team’s design. Almost every benchmark was successful in the build of the first prototype. Several heat calculations and FEA analyses were performed on the system to ensure the success …

4040c Universal Tester Backup, Devan Keeling, John Bowen, Cameron Bosner, Jacob Lenart

Williams Honors College, Honors Research Projects

The 40 Series valve is one of Swagelok's highest volume part families of which 60,000 parts per year shipped are multi-ported. The multiport configuration requires a unique tester to ensure proper assembly and quality of upstream processes.

Due to the multiport configuration of these valves no alternate testing option exists, resulting in a high rate of customer disappointments per day should the equipment fail.

In addition to the tester's criticality, it has also been ranked as one of Swagelok's most unhealthy assets and is probable to experience extended downtime in the future.

This project proposes to design and build a …

Implementation Of An Autonomous Guided Vehicle (Agv), Allen St. Myers, Alan Miller

Williams Honors College, Honors Research Projects

This report thoroughly represents a proposal to AAM Metal Forming Minerva for the implementation of an AGV (Autonomous Guided Vehicle) Unit. Our recommendations are made with consideration to existing manufacturing processes and demonstrate how using an AGV would be a net positive investment for the company. By first examining the current operating costs, a three-tiered proposal is tailored based on increasing investment cost. Each tier increase encompasses the previous tiers’ proposed improvements while also growing in complexity and investment cost. The results of our research indicate that our Tier 2 proposal will provide the most benefit to our facility now …

Viability Of A Proposed Transparent Fluid Model For Analog Metal Casting Filling Process, Andres Segura Irazoqui

Dissertations and Theses @ UNI

This research work was conducted to develop a proposed transparent fluid model to mimic dross formation and dispersion in metal castings during the mold filling process. The major cause for dross formation includes the air entrainment, surface turbulence, and bubbles, which create oxide films inside the molten metal. The oxide films are trapped inside the casting after solidification causing detrimental effects on the mechanical properties of the casting.

The objective of the investigation was to explore the feasibility using phenolic urethane as a transparent fluid material to investigate air entrainment mechanism. The experimentation consists of the following materials: the phenolic …

Toward Intelligent Welding By Building Its Digital Twin, Qiyue Wang

Theses and Dissertations--Electrical and Computer Engineering

To meet the increasing requirements for production on individualization, efficiency and quality, traditional manufacturing processes are evolving to smart manufacturing with the support from the information technology advancements including cyber-physical systems (CPS), Internet of Things (IoT), big industrial data, and artificial intelligence (AI). The pre-requirement for integrating with these advanced information technologies is to digitalize manufacturing processes such that they can be analyzed, controlled, and interacted with other digitalized components. Digital twin is developed as a general framework to do that by building the digital replicas for the physical entities. This work takes welding manufacturing as the case study to …

Mechanical Properties Of Nanomodified Hybrid Gfrp Composite Materials, Micah Rop Kimutai

College of Graduate Studies: Theses & Dissertations

The mechanical behavior of the nanomodified hybrid epoxy matrix was investigated in glass fiber reinforced plastics (GFRP). In this study, five nanocomposites enriched with as received halloysite, nanomer I.28E, HNT-APTES, and the hybrid combinations of the two HNTs with the nanomer I.28E were successfully fabricated. To evaluate the effects and morphological characteristics of the individual fillers and the hybrid configurations on the epoxy resin matrix, TGA, DSC, and DMA were analyzed. To understand the effect of the five configurations on the neat GFRP laminate, mode I interlaminar fracture toughness, tensile, and vibration properties were investigated. Electron microscopy testing techniques were …

In-Situ Process Monitoring For Metal Additive Manufacturing (Am) Through Acoustic Technique, Md Shahjahan Hossain

College of Graduate Studies: Theses & Dissertations

Additive Manufacturing (AM) is currently a widely used technology in different industries such as aerospace, medical, and consumer products. Previously it was mainly used for prototyping of the products, but now it is equally valuable for commercial product manufacturing. More profound understanding is still needed to track and identify defects during the AM process to ensure higher quality products with less material waste. Nondestructive testing becomes an essential form of testing for AM parts, where AE is one of the most used methods for in situ process monitoring. The Acoustic Emission (AE) approach has gained a reputation in nondestructive testing …

The Development Of A Holistic Quality Score Using In-Situ Monitoring Of Laser Powder Bed Fusion, Ryan Daigneault

College of Graduate Studies: Theses & Dissertations

Additive manufacturing processes allow for a great degree of flexibility in terms of part production. The process is autonomous once the part has started printing in that the operator generally does not need to intervene until the part is finished. One issue that this introduces, however, is an inability to determine part quality during the printing process. Once a part has started printing, the operator must either wait until the part is finished or regularly check on the part during the print to determine the part quality. Using data gathered from multiple sensors, a quality score can be used to …

Reclamation Of Fused Silica From Investment Shells Used For Casting Steel, Samuel L. Holt

College of Graduate Studies: Theses & Dissertations

Fused silica is widely used for investment casting shell molds. Fused silica shells are discarded after being used for casting one time. This is due to the transformation of fused silica to beta cristobalite above 1652℉ (900℃). To reduce cost and waste of investment casting foundries, this study is exploring a method to inhibit transformation of fused silica and reclaim it from high temperature investment casting shells. This research has employed firing to minimalize fused silica transformation to cristobalite. The phase transformation is minimalized due to sintering and coarsening of the particles during firing. Coarsening reduces surface area to volume …

Design And Development Of Soft Earthworm Robot Driven By Fibrous Artificial Muscles, Beau Ragland

College of Graduate Studies: Theses & Dissertations

Earthworm robots have proven their viability in the fields of medicine, reconnaissance, search and rescue, and infrastructure inspection. These robots are traditionally typically hard-shelled and must be tethered to whatever drives their locomotion. For this reason, truly autonomous capabilities are not yet feasible. The goal of this thesis is to introduce a robot that not only sets the groundwork for autonomous locomotion, but also is safe for human-robot interaction. This was done by ensuring that the actuation principle utilized by the robot is safe around humans and can work in an untethered design. Artificial muscle actuation allowed for these prerequisites …

The Effect Of Laser Welding Modes On Mechanical Properties And Microstructure Of 304l Stainless Steel Parts Fabricated By Laser-Foil-Printing Additive Manufacturing, Chia Hung Hung, Wei Ting Chen, M. Hossein Sehhat, Ming C. Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The success of laser-foil-printing (LFP) additive manufacturing depends critically on the laser welding of sheet metals onto the substrate or the previous layer during the part fabrication process. The welding can be generally categorized into two modes: conduction mode and keyhole mode. In this study, 304L stainless steel parts fabricated by the LFP process using the two laser welding modes are compared. The porosity, microstructure, and tensile properties of the fabricated parts in these two modes are measured and compared in the laser scanning direction (X) and part building direction (Z). The parts fabricated in the conduction mode have a …

Fabrication Of Silicon Nitride Parts By Ceramic On-Demand Extrusion Process, Sachin Choudhary

Masters Theses

“Ceramic On-Demand Extrusion (CODE) is a patented solid freeform fabrication method for manufacturing high-density monolithic ceramic parts. In the past 5-6 years, the technology has been successfully implemented to fabricate alumina and zirconia parts. The mechanical characterizations also show CODE’s high potential in achieving desired structural properties. The present study covers the fabrication of silicon nitride parts by CODE process, which entailed the design of paste formulation for achieving rheology suitable for dimensional control in fabricated parts and determining firing temperature and the content of sintering additives for silicon nitride green bodies fabricated by CODE. The density, hardness, and fracture …

Research And Development Of A Laser Hot Wire Deposition Process, Christopher Croft

Masters Theses

“Laser hot wire directed energy deposition (DED) is an increasingly popular method for improving deposition rates and overall reduction of build times in DED processing. While there is clear benefit, it is important to fully understand the impact of preheating the wire. This work focuses on developing a model that describes bead geometry output using all factors including the wire preheat. The model was fit with over 150 data points that explored a large range of each factor. The resulting model was then leveraged to evaluate a process control variable. The technique chosen used feedback from the hot wire system …

Advance Metallic Reinforcement Of Vat Photo Polymerized Parts, Scott Zinn

UNF Graduate Theses and Dissertations

The metallization or metallic reinforcement of polymer parts has been widely used in industry for several decades. Polymer parts are classically metalized for aesthetics, chemical and thermal resistance, electrical conductivity, and mechanical strength. Metallization has been shown to increase strength of polymer parts when compared to the strength of the bulk material without metallization. Additive manufacturing (AM) techniques that have emerged in the last few decades produce parts with different surface features and chemistry than the typical polymer part produced through injection molding. AM parts are typically weaker than traditionally manufactured parts from the same material due to intrinsic details …

Dry Reforming Of Methane Using Microwave Irradiated Metal Oxide/Coal Char Catalysts, Anthony Carter

Graduate Theses, Dissertations, and Problem Reports (ETD)

This research focuses on the synthesis of both shaped and amorphous powder materials, the combination of these materials with dried Powder River Basin (PRB) coal char, and their reactionary properties with methane and carbon dioxide gasses with conventional and microwave (MW) heating. The first goal of this project was to synthesize shaped micro and nano sized particles with ideal dielectric properties for converting electromagnetic energy into heat and proven capabilities of activating methane. These particles were synthesized via solvothermal, hydrothermal, and co-preceptory treatments alone and onto the surface of dried PRB coal char. PRB is a sub-bituminous, low-ranking coal (LRC) …

A Bibliometric Analysis Of Ultrasonic Vibration Assisted Turning, Govind S. Ghule, Sudarshan Sanap Prof. Dr.

Library Philosophy and Practice (e-journal)

Ultrasonic vibration-assisted turning (UVAT) is a new crossover in machining techniques which uses high frequency, low amplitude sound waves which are further superimposed on the cutting tool in traditional turning. This innovative technology is being utilized over the decades due to its conspicuous influence contrasted with traditional approach particularly in turning of hard-to-machine materials. This present paper analyses the past explores in the arena of ultrasonic vibration-assisted turning, by a far-reaching bibliometric investigation. The analysis is carried out by scrutinizing the studies through Science Direct and Scopus database to select the peer-reviewed papers. The advanced research tools like the word …

Predictive Maintenance Of Bearing Machinery Using Simulation- A Bibliometric Study, Karan Gulati Mr., Keshav Basandrai Mr., Shubham Tiwari Mr., Pooja Kamat Prof., Satish Kumar Dr.

Library Philosophy and Practice (e-journal)

Modelling is a way of constructing a virtual representation of software and hardware that involves a real-world device. We will discover the behaviour of the system if the software elements of this model are guided by mathematical relationships. For testing conditions that may be difficult to replicate with hardware prototypes alone, modelling and simulation are particularly useful, especially in the early phase of the design process when hardware might not be available. Model-based approach in MATLAB-Simulink can be useful for predictive maintenance of machines as it can reduce unplanned downtimes and maintenance costs when industrial equipment breaks. Through this bibliometric …

Comparison Of Popular Three-Dimensional Printing Materials For Oral And Maxillofacial Surgical Guidance Model, Mohammad Adhitya, Sunarso Sunarso, Abdul Muis

Journal of Dentistry Indonesia

The application of three-dimensional (3D) models in the medical field has become popular. However, the accuracy of 3D models for surgical guidance varies among different materials and 3D printing technologies, such as printing machine usage. Objectives: This study aims to obtain more information about the effect of three different materials printed using a fused deposition material printer from the same digital data source. This study also aims to compare, analyze, and test the materials’ ability. Methods: Each of the filament materials (acetylbutane stearate [ABS], polylactic acid [PLA], and high-impact polystyrene [HIPS]) are printed at two infill densities, their weight, volume, …

Spectral Absorption Coefficient Of Additive Manufacturing Materials, Nicholas J. Wallace, Matthew R. Jones, Nathan B. Crane

Faculty Publications

Active thermography techniques are of interest for quality assurance of additive manufacturing processes. However, accurate measurements of thermophysical properties of materials are required to successfully implement active thermography. In particular, the spectral absorption coefficient of materials commonly used in additive manufacturing must be known to accurately predict the spatial distribution of thermal energy generated from absorption of power emitted by a laser or pulsed flash lamp. Accurate measurements of these optical properties are also needed to develop greater understanding of additive manufacturing processes that rely on radiative heat transfer to fuse powders. This paper presents spectral absorption coefficient measurements and …

Thermo-Fluid Characterizations Of The Powder-Bed Fusion Additive Manufacturing Processes Using Laser And Electron Beam, M Shafiqur Rahman

LSU New Orleans Theses and Dissertations

The powder-bed fusion (PBF) process is a subdivision of Additive Manufacturing (AM) technology where a heat source at a controlled speed selectively fuses regions of a powder-bed material to form three-dimensional (3-D) parts. Two of the most effective PBF processes are selective laser melting (SLM) and electron beam additive manufacturing (EBAM), which can fabricate full-density metallic parts in a layer-by-layer fashion. In this study, thermal behavior and melt-pool dynamics in the PBF process are investigated by developing 3-D multiphysics-based thermo-fluid models for both SLM and EBAM, containing Ti-6Al-4V alloy as a powder-bed material. The laser and electron beams are modeled …

A Bibliometric Analysis Of Minimum Quantity Lubrication As A Sustainable Approach, Shrikant U. Gunjal Mr., Sudarshan B. Sanap Dr.

Library Philosophy and Practice (e-journal)

Environment-friendly machining methods are being focused widely across the research areas concerning the consequences and challenges of the traditional methods. Flood lubrication technique which is aggressively being implemented, targeting better machining attributes of the end product. However, the devastating effects of the flood lubrication technique are causing harmful consequences to the environment majorly and the machining operator therein. Minimum quantity lubrication (MQL) which is also called Near-dry machining (NDM) is the most attributed cooling and lubrication approach which justify the sustainable requirements of the development; as it implies only 50-150 ml/hr cutting fluid under consideration. The present article presents the …

Evaluation Of Mechanical Properties Of Malaysia Local Source Wood For Electric Cruiser Board Applications, Mohamad Rosman Othaman

Student Works (2020-2029)

This research project revolves around the idea to reduce the carbon emission in mitigating the issue of climate change. An idea to introduce the electrical cruiser board by Muhammad Fiqkri Ismail from Universiti Kuala Lumpur with his idea to promote carbon less form of multimodal transportation for users in urban city of Greater Kuala Lumpur leads this research to study the elastic properties of local source woods in Malaysia that could be proposed for this application. The wood is used for the construction of the deck of cruiser board which designed three layers with the cross-ply laminate. Three types of …

Design, Fabrication, And Reliability Effects Of Additively Manufactured First Level Compliant Interconnects For Microelectronics Application, Tumininu David Olatunji

Graduate Theses and Dissertations

Semiconductor packaging and development is greatly dependent on the magnitude of interconnect and on-chip stress that ultimately limits the reliability of electronic components. Thermomechanical related strains occur because of the coefficient of thermal expansion mismatch from different conjoined materials being assembled to manufacture a device. To curb the effect of thermal expansion mismatch between conjoined parts, studies have been done in integrating compliant structures between dies, solder balls, and substrates. Initial studies have enabled the design and manufacturing of these structures using a photolithography approach which involves a high number of fabrication steps depending on the complexity of the structures …

Modeling And Analysis For Unit Cell Size, Material Anisotropy And Material Imperfection Effects Of Cellular Structures Fabricated By Powder Bed Fusion Additive Manufacturing., Yan Wu

Electronic Theses and Dissertations

Cellular structures are networks of interconnected struts or walls with porosities and are widely found in many natural load-bearing structures such as plants and bones. Cellular structures offer unique functional characteristics such as high stiffness to weight ratio, tailorable heat transfer coefficient, and enhanced mechanical energy absorption, which makes them highly attractive in various engineering disciplines such as biomedical implants, electrodes, heat exchangers, and lightweight structures. There exists an abundance of literatures that have investigated various mechanical properties of various cellular structures such as Poisson’s ratio, elastic modulus, ultimate strength, yield strength, and failure characteristics. Based on the classic cellular …