Manufacturing Commons^™

Solid Loading Effects On The Assembly Of Alumina Particles In Aqueous Suspensions Due To The Dielectrophoretic Forces, Sivakumar Chithamallu, Rohan Kiran Parai, Dipankar Ghosh

Mechanical & Aerospace Engineering Faculty Publications

Current work in situ investigated the mechanisms of the interparticle interactions that evolve in dilute aqueous alumina suspensions subjected to alternating current (AC) electric field and the effects of solid loading of suspensions. The interactions were investigated for alumina suspension compositions in the 0.005‒0.04 vol.% solid loading range. Field‐induced interactions evolved via particle motion and dynamic assembly, chain formation parallel to the direction of the applied field and chain growth, chain cross‐linking, and chain thickening. The evolution time of each of those events was rapidly accelerated with solid loading. While chain cross‐linking was negligible in low solid loading suspensions, a …

Designing Robust Quasi-2d Perovskites Thin Films For Stable Light-Emitting Applications, Sharmistha Khan, Reshna Shrestha, Mengru Jin, Doyun Kim, Guan Lin Chen, Ruipeng Li, Yijia Gu, Qing Tu, Namyoung Ahn, Wanyi Nie

Materials Science and Engineering Faculty Research & Creative Works

Quasi-2D perovskite made with organic spacers co-crystallized with inorganic cesium lead bromide inorganics is demonstrated for near unity photoluminescence quantum yield at room temperature. However, light emitting diodes made with quasi-2D perovskites rapidly degrade which remains a major bottleneck in this field. In this work, It is shown that the bright emission originates from finely tuned multi-component 2D nano-crystalline phases that are thermodynamically unstable. The bright emission is extremely sensitive to external stimuli and the emission quickly dims away upon heating. After a detailed analysis of their optical and morphological properties, the degradation is attributed to 2D phase redistribution associated …

Controlling Nitrogen Pickup During Induction Melting Of Ultrahigh-Strength Cr-Ni-Mo-V Steels, Kingsley T. Amatanweze, Viraj A. Athavale, Mario F. Buchely, Laura N. Bartlett, Ronald J. O'Malley, Daniel M. Field

Materials Science and Engineering Faculty Research & Creative Works

Nitrogen pickup during air induction melting can result in porosity and a loss of fracture toughness in ultrahigh-strength quenched and tempered steel castings. Nitrogen atoms are easily adsorbed into liquid steel upon exposure to the air, and argon shrouding alone has limited effectiveness. Previous studies have shown that proper charge sequencing and maintaining a high amount of dissolved oxygen in the melt prior to tapping and deoxidation can limit nitrogen pickup in the melt. In the current study, the effect of melt practice and charging procedure on nitrogen pickup was studied as a function of hold time in a series …

Parametric Analysis Of Water Jet Descaling Efficiency Of Reheated Continuously Cast Thin Slab, Tochukwu P. Ojiako, Mario F. Buchely, Simon Lekakh, Ronald J. O'Malley, Richard Osei, Taha Tayebali

Materials Science and Engineering Faculty Research & Creative Works

Efficient oxide scale removal is critical for maintaining surface quality and process efficiency in steel manufacturing. This study optimizes water jet descaling by evaluating the performance of flat and rotary jet nozzles under varying process parameters. Using a combined approach of experimental analysis and computational fluid dynamics, it investigates the influence of pressure (138–275 bar), lead angle (0°, 15°, 25°), working distance (50–100 mm), and spray angle (15°–25°) on descaling efficiency. Findings indicate that flat jet nozzles achieve superior performance at short working distances due to concentrated impact forces, while rotary jet nozzles sustain efficiency over extended distances through dynamic …

Effect Of Gating Design On Filling And Inclusion Control In An Al-Killed Cr-Mo-Ni Steel, Kingsley T. Amatanweze, Koushik Balasubramanian, Soumava Chakraborty, Viraj A. Athavale, Mario F. Buchely, Laura N. Bartlett, Ronald J. O'Malley, Daniel M. Field, Krista R. Limmer, Katherine M. Sebeck

Materials Science and Engineering Faculty Research & Creative Works

The effect of gating system design on the inclusion population and size distribution in an aluminum-killed low-alloy advanced high strength steel casting was studied. A mold with four different gating systems: pressurized and non-pressurized with side risers, naturally pressurized with a side riser, and naturally pressurized with a top riser, was designed using computational fluid dynamics and solidification software. The design allowed inclusion populations in castings produced with each gating system to be compared during the same pouring event. Samples taken from different positions just below the top surface of each casting were analyzed using an SEM/EDS system with automated …

In-Situ Characterization Of Damage Mechanisms In Ceramic Matrix Composites, Cle' E. Sanchez

Theses and Dissertations--Mechanical and Aerospace Engineering

Ceramic Matrix Composites have many advantages, attracting the nuclear, aerospace, and automotive industries with their high heat stability, strength, and oxidation resistance. However, challenges are presented when machining these materials due to the brittle properties and complicated microstructure. The objective of this project was to identify damage mechanisms that occur when a CMC is orthogonally machined and the cutting mechanics are observed in-situ, followed by post-cut characterization of the as-machined surface morphology. In this analysis, the main variable is the feed rate, which can influence the damage mechanisms, such as matrix failure (matrix cracking) or fiber failure (pullout). Through this …

In-Situ Informed Modeling And Characterization Of Friction And Built-Up Edge In Machining Of Aerospace Alloys, Avery Hartley

Theses and Dissertations--Mechanical and Aerospace Engineering

Machining is by no means a new manufacturing process. However, it is separated from other traditional deformation processes by its extreme temperatures and strain rates. The function and life of a multitude of products and mechanical components are dependent on the material properties induced by changing the surface through machining. Furthermore, the tools used within machining are often expensive and material reserves are sparse. The understanding the mechanics of the machining process, especially related to the friction of the tool and workpiece, helps to further the life of tools and parts to minimize economic and environmental impact.

Current friction modeling …

Machining-Induced Residual Stress Modeling Using Physics-Informed Neural Networks, Md Mehedi Hasan

Theses and Dissertations--Mechanical and Aerospace Engineering

Process-induced residual stress (RS) plays a critical role in determining the structural integrity, fatigue life, corrosion resistance, and dimensional stability of manufactured components. Tensile residual stress can be harmful to the machined workpiece by lowering fatigue strength, while compressive residual stress helps to prevent such issues. Therefore, accurate prediction and control of machining-induced residual stresses are essential for optimizing manufacturing processes and enhancing component performance. However, existing modeling approaches—empirical, analytical, and numerical—often have limited predictive accuracy, demand extensive calibration, or involve high computational costs. Traditional finite element analysis (FEA) provides modeling insights but is constrained by its high computational cost …

Integrated Compliant Structure For A Hand Exoskeleton, Tristan R. Koopman

Honors Undergraduate Theses

This thesis presents the design and prototyping of a wearable hand exoskeleton that integrates a flexible structural framework to assist with hand movement while maintaining comfort and anatomical conformity. The goal was to create a device that supports tendon-driven actuation through a compliant structure, combining elements of rigidity and flexibility to match the natural geometry and motion of the human hand. Traditional hand exoskeletons often trade off motion for structure or vice versa. This project aims to bridge that gap with a hybrid compliant design that balances flexibility and support. The design process followed an iterative approach involving rapid prototyping …

High Voltage Junction Box For Demonstrator Vehicle, Benjamin Lubowicki, Ryan Dorste

Williams Honors College, Honors Research Projects

Schaeffler, our industry sponsor for this project, is designing a battery pack for a demonstration vehicle that requires a high voltage junction box to route power to the vehicle. The project type is a unique design of a mechanical component, mechanism, and process. Our objective for this project is to assemble provided electro-mechanical components into an enclosure following a provided electrical diagram. The expected deliverables are the following: 3D CAD assembly of final product, FEA analysis of designed components, 2D print of final product, fabrication and assembly of designed parts, technical report documenting design process and installation. The skills required …

Cost-Effective Brake Rotor Resurfacing Tool, Raider Morgan, Benjamin Vaughan

Williams Honors College, Honors Research Projects

Brake rotors can develop uneven spots over time, causing vibration and poor braking performance. Commercial brake lathes are effective but often too expensive or complicated for at-home mechanics. This project aimed to create a low-cost tool, around $200–$300, to resurface four rotors in under two hours. We explored two main designs: a pad file system and a motorized endmill powered by a handheld drill. Calculations ultimately showed that the pad file was not viable, so the final prototype produced was the endmill-based design. Our testing showed we were limited by poor stiffness in the endmill and unforeseen loading. Although the …

Zips Baja Chassis Manufacturing Design, Alex Love, David Scruppi

Williams Honors College, Honors Research Projects

The Society of Automotive (SAE) annually organizes collegiate design team competitions for university organizations nationwide. Baja SAE tasks teams comprised entirely of students with developing, iterating, manufacturing, testing, and competing with an offroad race buggy in accordance with all SAE regulations. Teams are responsible for producing a tech compliant vehicle for each competition season, travelling across the United States to put their designs to the test. In the 2022-2023 competition season, SAE introduced ruleset clarifications on the chassis manufacturing process, essentially mandating the production of all vehicle frames to be manufactured entirely in house with no external assistance. A chassis …

Akronauts Turbopump Research Project, Gerald Drabeck Iii, Michael Mccalla, Joshua Skelton

Williams Honors College, Honors Research Projects

The idea of this project is to design a turbo pump template capable of fitting into future Akronauts rocket designs. This allows the rockets to travel higher due to the reduced net weight. Many methods were used to verify the rigidity and feasibility of the design, such as Finite Element Analysis and fluid dynamics simulations.

Kb Bioenergy Mobile Dewatering System Research, Wyatt Balser, Nathan Szymczak

Williams Honors College, Honors Research Projects

This report outlines the design and development of a mobile skid-mounted dewatering system intended for high-solids sludge processing at wastewater treatment facilities. The goal was to create a self-contained, transportable unit capable of reliably separating water from sludge using a screw press, while integrating upstream processes such as polymer conditioning, sludge maceration, and pumping. The final design prioritizes serviceability, structural integrity, and operational simplicity, featuring a consolidated equipment layout, engineered piping diagrams, and vendor-specified components.

Throughout the project, multiple design alternatives were evaluated using a weighted decision matrix, leading to the selection of a skid platform over a trailer configuration …

Design And Development Of A Rapid Tensile Quench Rig, Tyler Jewell, Justin Naylor

Williams Honors College, Honors Research Projects

This report outlines the design process and implantation of a tensile quenching rig that incorporated forced convection and a frequency generator. When any metal is quenched, a vapor barrier forms around it. When this happens, it limits the heat flux that may occur until the barrier turns into just nucleate boiling. The vapor barrier acts as an insulator and causes the heat flux to fluctuate, causing uneven hardening which would limit the use of some materials. To combat this effect, we are trying to use forced convection, and something new, which is adding high frequency waves into the quenching process. …

3d Printing Of A Solid-State Battery, Maurizio A. Brozzi

Honors Undergraduate Theses

Solid-state battery research has gained significant attention in recent years, as it provides a unique solution for several common issues in conventional Li-ion batteries. Additionally, as additive manufacturing technologies continue to advance, they have the potential to fabricate solid-state batteries with new materials. The objective of this study is to explore the feasibility of 3D printing of a solid-state battery. By creating an initial PEO-PSF hybrid polymer matrix dissolved in DMSO and adding a lithium salt, the base electrolyte ink was formed. With the addition of conductive additives and active material, electrode inks were also produced. Super P was used …

Effect Of Build Orientation On Tensile Properties And Fractography Of Additive Manufactured Inconel 718 Alloy, Ajay Kumar Maurya, Amit Kumar, Swarnambuj Suman

ASEAN Journal on Science and Technology for Development

The additive manufacturing (AM) technique “Direct Metal Laser Sintering (DMLS)” is used to create 3D objects directly from 3D design data. A lightweight and complexity-free part without any expensive tooling can be fabricated easily using this method, but it is still challenging to achieve the desired mechanical strength from AM parts, as the mechanical properties of AM-produced parts vary with orientation, scan strategy, and process parameters. Inconel 718 alloy is most commonly utilized in the aerospace and automotive industries, because of its high resistance to corrosion and excellent mechanical qualities. This work presents a study to investigate the orientation-based mechanical …

Characterization Of The Solid-State Bonding For Simulated Charge And Seam Welds In The Porthole Die Extrusion Process, Randall L. Bowers

Theses and Dissertations--Chemical and Materials Engineering

The isothermal (ISO-T) compression configuration is ideal for utilizing as a material input of flow stress at temperature and strain rate in models of the porthole die extrusion process due to the isothermal nature of the test. Micro-tensile testing was conducted to validate the solid-state welding integrity of the ISO-T samples at various temperatures and strain rates. Results of the mechanical testing were correlated with fractography and microstructural evaluations of the welds to confirm bonding behavior. Both clean interface conditions and oxidation and lubrication layers were evaluated to simulate the difference of seam and charge welds in the process. Results …

Laser Based Metal 3d Printer, Inura Goonawardena

All Graduate Theses, Dissertations, and Other Capstone Projects

The technology and applications of additive manufacturing (AM) have advanced significantly in recent years. Research from hobbyist to industrial scale has evolved and has seen advancements in materials that can be utilized for industrial manufacturing. The Institute for Machine Tools and Industrial Management at the Technical University of Munich (TUM) developed the reAM250, an open-source research platform for Powder Bed Fusion with a Laser (LPBF). It was made available to facilitate study into component-level innovation, control techniques, and process monitoring without the budgetary and intellectual property constraints of commercial machines. This paper delves into the concept and production of the …

Affordable And Sustainable: Innovating Filament Extrusion For Recycled Materials, Turab S. Rizvi

UROP Posters

The chemical stability, toxicity and non-biodegradability of the polymers pose a significant environmental threat. Addressing end-of-life treatment sustainability is crucial for mitigating these issues. The customized Lyman filament extruder in the Advanced Magnetic Materials Processing Laboratory represents an innovative approach to advancing sustainability in renewable energy production and CO₂ mitigation. Redesigning the thermal system and screw operation will tackle key challenges, including precise temperature control, consistent material flow to handle diverse recycled materials. Integrating an advanced thermal regulation system will reduce the energy consumption by maintaining optimal thermal conditions, thereby lowering the CO₂ footprint of the recycling process. The optimized …

Ease Of Product Disassembly Through A Systematic Structured Time-Based Design For Disassembly Methodology, Emeka S. Igwe

College of Graduate Studies: Theses & Dissertations

This research introduces a systematic time-based design for disassembly (DfD) framework aimed at optimizing product disassembly by addressing important features like liaisons between components in product, component accessibility and the overall modularity of the product. This study specifically covers electromechanical and mechatronic systems in both household and industrial setup, identifying their disassembly challenges and high value pointers for improvement. The methodology involves using a design for disassembly framework called LeanDfD in carrying out a holistic disassembly process and evaluating quantitative metrics like disassembly time and complexity and suggesting further redesign strategies to minimize disassembly time and cost. Adopting this systematic …

Ranking Of Non-Destructive Testing Methods For Ductile Iron Castings For Industry 4.0, Michael W. Jones

College of Graduate Studies: Theses & Dissertations

Non-destructive testing techniques provide a unique solution to provide quality assurance of parts rapidly and efficiently without altering the functional properties of the workpiece. The metal casting industry requires an elevated level of quality assurance, as castings are critical components to several industries. The wrong selection of non-destructive testing methods could increase production costs, quality costs, and potentially permit non-conforming castings to enter the market. The aim of this research is to develop a ranking model for non-destructive testing techniques for ductile iron castings within the context of the fourth industrial revolution. The ranking model analyzes the effectiveness of the …

Pulsed Arc Additive Manufacturing Of A Functionally Graded Er2209 Duplex Stainless Steel And Hsla-100 Structure: Morphology, Characterization, And Mechanical Performance, Stevens G. Hill Jr

College of Graduate Studies: Theses & Dissertations

Wire arc additive manufacturing is a process well suited to the efficient production of large structures. Duplex stainless steel exhibits high corrosion resistance and good strength which can be highly beneficial for industrial use. However, its use is limited due to its cost and complexity in controlling microstructure to achieve desired properties. In many cases, it can be highly beneficial to manufacture a component which uses specialty steel grades such as duplex stainless steel only where necessary, and utilizes more affordable, commonly available steels for reinforcement or bulk structural support. A functionally graded material satisfies these requirements by providing a …

Effect Of Alloying Additions On Austenite Refinement In Nickel-Alloyed Ductile Cast Irons, Adnan Adib Aahamed

College of Graduate Studies: Theses & Dissertations

The benefits associated with the application of ductile irons are significantly attributed to the control of microstructures, with refinement of austenitic matrix during solidification playing a significant role. Nickel alloyed ductile irons are attractive due to their potential for high ductility and suitability for potential high-temperature applications with stable austenitic microstructure. Refinement of austenite grain structure is thus important to enhance the mechanical properties of the alloyed ductile iron. This research investigates the impact of in-mold additions of different alloying elements on the austenite morphology and grain refinement of nickel-alloyed ductile iron along with the associated mechanical properties. A hypoeutectic …

Enhancing The Mechanical Properties Of Sla 3d-Printed Bio-Resin From Linseed Oil Using Cellulose And Lignin Biopolymers, Chukwunonso A. Ikedionu

College of Graduate Studies: Theses & Dissertations

Abstract

This research explores the development of bio resin from linseed oil by the process of epoxidation and acrylation to produce acrylated epoxidized linseed oil (AELO). Lignin and cellulose biopolymers were added as reinforcement at varying weight fractions of 1 wt.%, 2.5 wt.%, and 5 wt.%, and their mechanical performance was compared against pure AELO. The formulations were printed using an Elegoo SLA 3D printer to create standardized test specimens like tensile bars, compression cylinders, and hardness blocks, which were all prepared according to the ASTM testing standard.

The results indicate that reinforcement effects depend on both filler type and …

Influence Of Alloy Composition On The Process Robustness Of Steels Consolidated Via Laser-Directed Energy Deposition, Jonathan Kelley

Masters Theses

"To ensure consistent quality of additively manufactured parts, it is advantageous to identify alloys which can meet performance criteria while being robust to process variations. Toward this end, this work investigated the effect of alloy composition on the robustness of steels consolidated via laser-directed energy deposition (L-DED). Ultra-high-strength low-alloy steel (UHSLA) and pure iron powders were mixed in-situ to produce 10 compositions containing 10-100% UHSLA by mass. JMatPro material simulations roughly predicted phases and mechanical properties. Two sets of experiments were used to evaluate the sensitivity of as-built hardness (all 10 compositions) and tensile properties (5 select compositions) to process …

Pla-Based Bone Tissue Engineering Scaffolds Incorporating Hydroxyapatite And Bioactive Glass Using Digital Light Processing, Engin Gepek, Fateme Fayyazbakhsh, Lev Suliandziga, Vadym Mochalin, Osman Iyibilgin, Yue-Wern Huang, Ming C. Leu

Chemistry Faculty Research & Creative Works

Bone tissue engineering (BTE) aims to repair bone defects using biocompatible materials with tailored geometries and pore structures, providing appropriate mechanical support and control over biodegradation kinetics to promote bone growth. In this study, we utilized digital light processing (DLP) 3D printing to fabricate scaffolds with varying pore sizes using polymer–ceramic slurries composed of polylactic acid (PLA) as the main polymer matrix, incorporated with hydroxyapatite (HA) and bioactive borate glass (BBG) at various ratios. We studied the effect of composition on rheological behavior, printability, mechanical properties, bioactivity, degradation rate, and biocompatibility. While HA increased viscosity and reduced printing accuracy, it …

Study On Field Emission Characteristics Of Carbon Nanotube Arrays Patterned Via Laser Welding Of Dissimilar Materials, Hung Yin Tsai, Yi Hung Chen, Kuan Ching Wang, Paul W. Leu, Ming C. Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper describes a new method of growing carbon nanotube (CNT) arrays using laser welding of a catalyst metal onto the surface of a quartz substrate, followed by CNT growth through the chemical vapor deposition (CVD) process. A major advantage of this method is its ability to pattern the catalyst before growing the CNTs, thus allowing for the formation of CNTs at specific locations. The laser pre-treatment method minimized structural damage to CNTs in comparison to the laser post-processing method, achieving a lower ID/IG value of 0.72 in Raman spectroscopy analysis. Using hexagonally patterned CNT arrays on quartz, we achieve …

Framework For Development Environment Selection In Digital Twin Applications, Carlos Dodero Fernandez

Graduate Theses, Dissertations, and Problem Reports (ETD)

Digital Twin (DT) technology, a cornerstone of Industry 4.0, facilitates real-time synchronization between virtual models and physical manufacturing systems, enhancing operational efficiency and decision-making. However, its widespread adoption is hindered by the absence of standardized methods for selecting Development Environments (DEs) for DTs, compounded by challenges in cost, interoperability, and connectivity with Industrial Internet of Things (IIoT) protocols. This thesis proposes a Systematic Selection Framework to address this gap, offering a structured methodology to evaluate DEs based-on visualization quality, scalability, interoperability, and cost-effectiveness for manufacturing applications. The framework categorizes and compares sixteen DEs into Game Engines, Robotics Engines, and Simulation …

Characterization Of Properties And Defects Of Alternative Matrix Materials For 3d Printed Continuous Carbon Fiber Reinforced Composites, Noah Darren Osborne

Graduate Theses, Dissertations, and Problem Reports (ETD)

Additive manufacturing, commonly known as 3D printing, has the potential to transform the production of end-use parts by facilitating the creation of complex shaped, low-volume components that are expensive to manufacture using traditional methods. However, thermoplastic polymer matrices currently utilized in 3D printing of carbon fiber composites, often lack the mechanical properties needed for aerospace applications. To address this issue, researchers have developed fiber-reinforced 3D-printed composites using an innovative two-step process which involves printing 3D preforms using fused deposition modeling, followed by compression molding. However, most previous work involves the use of nylon-based polymer matrices while there are a number …