Manufacturing Commons^™

Wire + Arc Additive Manufacturing, Micheal Santangelo

GS4 Student Scholars Symposium

Additive manufacturing is a rapidly developing technology which promises to drastically reduce the cost and waste associated with manufacturing parts. However, current systems of additive manufacturing used for creating metal parts which are suitable for use in the aerospace, automotive, and defense industries are complex, expensive, and not robust enough to produce a wide range of part features and geometries. A relatively new method, called wire arc additive manufacturing(WAAM) is a low cost option that can create parts which have a near-net shape, and only require a small amount of post processing before they are ready for use. This system, …

Densification Of W-Ni-Fe Powders Using Laser Sintering, Xuan Wang, Matthew Wraith, Stephen Burke, Howard Rathbun, Kyle Devlugt

Industrial and Manufacturing Engineering

In this paper, Laser Sintering (LS) of 90%W–7%Ni–3%Fe (wt.%) powders have been investigated, with the goal to understand the influence of final density by laser power, scanning speed, laser trace width, and the number of scanning passes. The results suggest that the laser power and scanning speed are the most important factors influencing density; the influence of trace width and number of scanning passes are not significant. With the increase of laser power and decrease of scanning speed, higher density can be achieved. The microstructure analysis indicated that the porosity changed from open porosity to closed porosity with higher laser …

A Study On The Sustainable Machining Of Titanium Alloy, Abdulhameed Alaa Dawood

Masters Theses & Specialist Projects

Titanium and its alloy (Ti-6Al-4V) are widely used in aerospace industries because of their light weight, high specific strength, and corrosion resistance. This study conducted a comparative experimental analysis of the machinability of Ti-6Al-4V for conventional flood coolant machining and sustainable dry machining. The effect of cutting speed, feed rate, and depth of cut on machining performance has been evaluated for both conditions. The machining time and surface roughness were found to be lower in dry machining compared to flood coolant machining. The tool wear was found to be unpredictable, and no significant difference was observed for dry and coolant …

Optimization Of Process Parameters In Micro Electrical Discharge Machining (Edm) Of Ti-6al-4v Alloy, Farshid Alavi

Masters Theses & Specialist Projects

Ti-6Al-4V has a wide range of applications such as in the automotive and aerospace industries. Nevertheless, titanium alloys are very difficult to machine by conventional methods. Micro-EDM is a non-conventional machining method that uses the thermal effect of precisely controlled sparks. Manufacturers are looking for the methods and optimal settings to increase the productivity of micro-EDM in terms of lessening machining time and tool wear. Moreover, surface integrity of the machined area is crucial for some products such as biomedical implants.

The objective of this study was to investigate the effects of the micro-EDM process parameters on response variables, in …

Development Of Distributed Off-Grid Renewable Energy System For Rural African Communities, Mateo Sebastian Guerrero, Menghong Feng

Engagement & Service-Learning Summit

Our Hybrid Energy System team is committed to develop low-cost renewable energy solutions to rural African communities where access to electricity from government grid is not available. According to a World Bank’s report, only 24% of sub-Saharan countries have access to electricity. Our team has been working with local partners to build renewable energy systems since 2008. From 2015 the team has been working on micro hydropower turbine and vertical-axis wind turbine with solar energy system combined. Our current efforts include a prototype design of a wind-solar system, using a new concept of vertical axis wind turbine to harvest wind …

Skycsr: Optimal Communication Methods For Coordinating Ground Support In A Private And General Aviation Setting, Jessica Burke

Industrial and Manufacturing Engineering

Delays due to miscommunication of between the pilot and ground service providers are increasing. The objective of this project is to develop a new method of communication between pilots, line service technicians and customer service agents. This will be achieved first through an investigation into current methods and state of the industry, followed by a survey conducted with a group of pilots and flight schools. This culminates in a web application that will take the deficiencies identified in the survey, to make sure ground service or fuel orders are explicitly clear and minimize the probability of a mis-fueling, overlooked fueling, …

Carbon Emission Awareness And Information Platform, Jose Ignacio Cordero, Paul Romero

Industrial and Manufacturing Engineering

Climate change due to global warming has become a worldwide concern.

Nowadays, people are starting to wake up and realize that changes need to be

made in their lifestyles in order to preserve this earth and provide a better planet

for future generations. Finding a concrete solution to global warming and climate

change has proven to be a very challenging task. Governments have tried

implementing solutions and as a result, corporations have been forced to absorb

or transfer the cost of unsuccessful environmental regulations. Meanwhile,

individuals remain frustrated, wishing they could find a way to help.

The motivation behind this …

Multi-Level Route-Optimization Computer Application, Ryan Sutardji, Frank Nguyen

Industrial and Manufacturing Engineering

This report provides a detailed analysis on how to optimize driving routes by creating a computer application. There are many different route-optimization issues that logistical companies consistently face, as well as many different solutions and algorithms. With technology on the rise, pick-up, delivery, and transportation services are become a huge part of our everyday lives. When optimizing routes, reducing transportation costs by minimizing travel distance is always ideal, but other factors must be considered such as arriving at a location before or after a certain time. Our objective is to optimize driving routes based on travel distance and priorities. We …

Multi-Axis Machining Project Development, Ryan Patrick Blodgett, Andre Peter Rivera

Industrial and Manufacturing Engineering

Multi-axis milling is a manufacturing material removal process in which computer numerically controlled (CNC) tools cut away excess material through movement in four or more axes. Compared to traditional three-axis machining, multi-axis machining greatly increases the capability and accuracy of the CNC machining processes by reducing the amount of operations required to completely machine a part. Currently, the Industrial and Manufacturing Engineering Department at Cal Poly lacks an advanced CNC class that incorporates fourth and fifth axis CNC machining in the curriculum. This report describes the process behind creating a project for such a class. The class will demonstrate the …

Grant County Public Utilities District - Rotor Pole Lifting Device, Baylie Johnson

All Undergraduate Projects

Grant County Public Utilities District is planning a rehabilitation of all turbine and generator units at Priest Rapids Dam beginning in August 2016. After the generator rotor is removed from the unit, the rotor poles must be removed from the rotor. They are oriented vertically in the rotor and horizontally on the floor and in shipping containers. The objective of this project is to design, manufacture and test a lifting and a turning device for Priest Rapids Dam’s generator rotor poles. The lifting device was designed to attach a 3500 pound rotor pole to a crane and lift it. The …

Jeep Wj Multipurpose Oversize Spare Tire Carrier, Caleb J. Marrs

All Undergraduate Projects

OEM spare-tire wells have size limitations that only allow up to a certain size tire. However, the OEM tire well is not effective for the off-road enthusiast that needs an extra over size tire in case of an emergency. While off-roading it is important to be equipped with all the necessary tools and parts to get out safely because there is no roadside assistance off-road. The Jeep WJ is not a popular off road vehicle which means aftermarket accessories are not common. In order to optimize the space inside and out of the vehicle, a device is needed that will …

Paper Core Feeder System, Sergio Flores Velez

All Undergraduate Projects

Paragon Films has always strived to increase productivity and decrease waist within their company. The plant located in Union Gap, Washington currently has two production lines operating 24/7 managed by 2 to 3 people. The heavy line produces 5000 to 10000 revolutions per roll. This production line has a three part system that automatically feeds the paper cores to the spool shafts to roll the films. Therefore, the employees during that shift do not have to worry about filling up the bin very often. On the other hand, the second production line, which produces the hand films, does not have …

Multiple Apple Box Lift 1/10th Scale Model, Kyle J. Burlingame

All Undergraduate Projects

Title and Author: 1/10th Scale Multiple Apple Box Lift by Kyle Burlingame (Engineering Technologies, Safety, and Construction) Abstract/Artist statement: A 1/10th scale Multiple Apple Box Lift was designed and built as a proof of concept for a full scale device. The Multiple Apple Box Lift was designed to meet a customer’s requirements and to be presented at SOURCE. This device lifts the top half of the stacked apple boxes on a pallet in order to allow access to the boxes in the middle of the stack. The device can be manually operated by two people while in-between narrow rows of …

The Design And Construction Of A Torque Measuring Arm For An Air Motor, Logan Dearinger

All Undergraduate Projects

There is a system efficiency lab that sits in the thermodynamics lab of the Mechanical Engineering Technologies department. To expand this lab, a torque measuring device was needed to measure the torsional force that the pump exerts on the air motor. The expansion of this lab is important to give a better understanding of how the different mechanical parts effect the efficiency of the overall system. The first step in the expansion process was the design of a suitable torque measuring device. The most efficient design was a simple one with minimal moving parts. When the air motor is energized …

The Pneumatic Leg Extension, David G. Sedano

All Undergraduate Projects

In recent years, reaching altitudes that are higher than your normal-height has evolved from pure amusement to an “in-demand” necessity out in the field. Means of achieving greater than normal height range from wooden poles to aluminum stilts. The era of ladders and other extension methods are slowly fading away. There are many designs in the market that focus on different factors to make a stilt. As other designs focus on one or two enhancements, the pneumatic leg extension’s objective is to improve all aspects of the stilt. This radical new design differs greatly from traditional stilt designs. The pneumatic …

Conversion Casting: Adapter Hub, Joseph M. Coup

All Undergraduate Projects

The concept of conversion casting makes manufacturing major components much more efficient with regards to time and cost. The conversion cast of the adapter hub used in the Victair Mistifier is a major component that requires 8 hours to machine. The existing hub starts from steel stock and then that block of steel is placed into a CNC machine and coded in to create the adapter hub. The manufacturing method changes to a casting for the adapter hub will create a replicated part that requires 1.5 hours of post machining. The intricate design makes a conversion to casting more effective …

Multi-Use Fireline Handtool, Bruce W. Bernard Jr

All Undergraduate Projects

A wildland firefighter is a valuable resource to protecting public lands and managing fuels. The many hand tools used by firefighters aid in their ability to complete any required tasks effectively. Several of the tools available are specially purposed for individually grubbing, scraping, or liming. A small squad of firefighters could become a more effective resource if the tools they carried could perform several of these purposes as one single tool. To improve the effectiveness of an individual on the fireline a multi-use hand tool was designed to include an axe for liming and a heavy duty scraper for grubbing …

Properties Of Partially Stabilized Zirconia Components Fabricated By The Ceramic On-Demand Extrusion Process, Wenbin Li, Amir Ghazanfari, Devin Mcmillen, Ming Leu, Gregory Hilmas, Jeremy Watts

Faculty Publications, Mechanical Engineering

The Ceramic On-Demand Extrusion (CODE) process is a novel additive manufacturing process for fabricating dense ceramic components from aqueous pastes of high solids loading. In this study, 3 mol% Y2O3 stabilized tetragonal zirconia polycrystal (3Y-TZP) parts were fabricated using the CODE process. The parts were then dried in a humidity controlled environmental chamber and sintered under atmospheric pressure. Mechanical properties of the sintered parts were examined using ASTM standard test techniques, including density, Young’s modulus, flexural strength, Weibull modulus, fracture toughness and Vickers hardness. The microstructure was analyzed, and grain size was measured using scanning electron microscopy. The results compared …

Asme Mini Rc Baja: Drivetrain, Jason M. Moore

All Undergraduate Projects

Title and author: ASME mini RC Baja Drivetrain by Jason Moore; partner Mike Cox. (Engineering Technologies, Safety, and Construction)

Abstract/Artists Statement: The issue that this project is concerned with is how to design and build a drivetrain, steering and suspension systems for an RC car. The systems must be simple and functional. Furthermore, these systems will be designed to fit on a small chassis and not interfere with each other. They also need to be strong and durable enough to propel the car forward and maneuver through various obstacles and be built in a way that is easy to take …

A Novel Extrusion-Based Additive Manufacturing Process For Ceramic Parts, Amir Ghazanfari, Wenbin Li, Ming Leu, Gregory Hilmas

Faculty Publications, Mechanical Engineering

An extrusion-based additive manufacturing process, called the Ceramic On-Demand Extrusion (CODE) process, for producing three-dimensional ceramic components with near theoretical density is introduced in this paper. In this process, an aqueous paste of ceramic particles with a very low binder content (<1 vol%) is extruded through a moving nozzle at room temperature. After a layer is deposited, it is surrounded by oil (to a level just below the top surface of most recent layer) to preclude non-uniform evaporation from the sides. Infrared radiation is then used to partially, and uniformly, dry the just-deposited layer so that the yield stress of the paste increases and the part maintains its shape. The same procedure is repeated for every layer until part fabrication is completed. Several sample parts for various applications were produced using this process and their properties were obtained. The results indicate that the proposed method enables fabrication of large, dense ceramic parts with complex geometries.

Shellfish Bag Maker, Trevor R. Reher

All Undergraduate Projects

When commercially harvesting shellfish specifically clams and oyster, plastic mesh bags are commonly used to place shellfish in after harvesting on beaches. The issues is taking the raw bag material used for harvest and cutting it to a specified length. The material comes on a 2000 ft. spool and needs to be cut to a length of 54 in. Using an existing but out dated machine, a bench mark was made that the new design must be 10% more efficient for the customer to invest money into building the machine. Using mechanical machine design and computer designing software the machine …

Flag Raising Device, Josh Quintero

All Undergraduate Projects

The motivation for this project stems from a lifetime of boating with father Richard Jones. One problem that many people encounter, including Richard, was when towing someone behind a boat, is the difficulty with handling the warning flag. This flag is used to show other surrounding boats that someone has fallen into the water behind their boat. This warns other boats to stay far away from that area to keep safe from running over the swimmer. Although, when holding the flag in the boat, it can be hard to see at times. The boat driver, or other people standing in …

Hydraulic Sprayer Boom Upgrade, Chad R. Omlin

All Undergraduate Projects

Title and Author: Agriculture sprayer hydraulic boom upgrade by Chad Omlin (engineering Technologies, Safety, and Construction)

Abstract: Today’s agriculture industry is all about being the most efficient with your time, land, employees, and machinery. One thing that has made farming more efficient has been the use of hydraulics. Having a sprayer unit with manual booms is not being efficient with your time and/or employees. To make the sprayer unit more efficient, hydraulic cylinders were added. Sketched solutions were analyzed using statics and mechanics of materials principles. Drawings were completed for the successful analysis solutions. Solid works software was used to …

Met 314 Torque Measurement, Jose Bejar

All Undergraduate Projects

As part of the Mechanical Engineering Technology program, students are required to take a Thermodynamics class. In this class one of the labs they do consists of an air motor running a water pump. The professor teaching that class wanted a device that would fit within the lab rig which would calculate the torque produced by the motor. Therefore this project consists of building a device that will allow the case (body) of the air motor to fully rotate opposite to the rotation of the shaft in order to measure the torque the motor produces at certain revolutions per minute. …

Asme Mini-Baja Rc Car (Steering And Suspension Systems), Michael E. Cox

All Undergraduate Projects

The issue that this project is concerned with is how to design and build a drivetrain, steering and suspension systems for an RC car. The systems must be simple and functional. Furthermore, these systems will be designed to fit on a small chassis and not interfere with each other. They also need to be strong and durable enough to propel the car forward and maneuver through various obstacles and be built in a way that is easy to take apart and repair quickly. These design problems were approached using basic mechanical design concepts such as gear kinematics, spur and bevel …

Fiber Orientation Prediction And Strength Evaluation Of Composite Spur Gears Reinforced By Discontinuous Fiber, Nawrin Jahan

Electronic Theses and Dissertations

Composite materials have been extensively used for their important role in attenuation of components design, low specific weight, high mechanical performance, and excellent corrosion resistance offer significant advantages over metallic materials. These superlative properties can be attained by tailoring different material in an appropriate combination of the reinforcing phase (carbon fiber, alumina, etc.) and matrix phase (polymer, ceramic, metals, etc.). Carbon fiber reinforced composites are mostly used on intricate stress sensitive structures like wings of aero plane or gear. Amount of fiber, fiber type, and size of the fiber and the orientation of reinforcing fibers directly influence the mechanical properties …

Effects Of Defects On The Performance Of Hierarchical Honeycomb Metamaterials Realized Through Additive Manufacturing, Kazi Moshiur Rahman

Electronic Theses and Dissertations

Cellular metamaterials are of immense interest for many current engineering applications. Tailoring the structural organization of cellular structures leads to new metamaterials with superior properties providing lightweight and very strong/stiff structures. The incorporation of hierarchy to regular cellular structures enhances the properties and introduces novel tailorable metamaterials. For many complex cellular metamaterials, the only realistic manufacturing process is additive manufacturing (AM). The use of AM to manufacture large structures may lead to several types of defects during the manufacturing process, such as imperfect cell walls, irregular thickness, flawed joints, partially missing layers, and irregular elastic plastic behavior due to toolpath. …

Characterization Of Mechanical Properties Of Gamma Irradiated Additively Manufactured Articles For In-Space Manufacturing, Behzad Rankouhi

Electronic Theses and Dissertations

Recently, additive manufacturing (AM) has opened many doors to engineers across various industries, such as medical, bio-engineering, automotive and recently, aerospace. In an effort to contribute to the development of AM in aerospace industry, a series of experiments were designed to help understand the behavior of 3D printed parts and extend its capabilities and possible uses. The first chapter of this project will focus on understanding the mechanical behavior of additively manufactured articles. In this chapter, a comprehensive effort was undertaken to represent the strength of a 3D printed object as a function of layer thickness by investigating the correlation …

Mechanical Testing Of Fused Filament 3-D Printed Components For Distributed Manufacturing, Nagendra Gautam Tanikella

Dissertations, Master's Theses and Master's Reports

Fused filament fabrication (FFF)-based open-source 3-D printers offer the potential of decentralized manufacturing both in developing and developed countries. Unfortunately, a severe lack of data and standards relating to material properties and printed components limit this potential. This thesis first investigates the mechanical properties of a wide-range of FFF materials and provides a database of mechanical strength of the materials tested. The results demonstrate that the tensile strength of a 3-D printed specimen depends largely on the mass of the specimen, which provides a means to estimate the strength of 3-D printed components. Then this information is used to evaluate …

Prediction Of Surface Roughness In Abrasive Waterjet Cutting Of Graphite Composite Using Response Surface Methodology, Prabhakar Bala

Masters Theses

"In the present work, surface roughness after machining of composite material was the main focus of study. Response surface methodology with Box- Behnken experimental design was applied in predicting the surface roughness (R_a) of abrasive waterjet cut 1-inch-thick graphite/epoxy composite. Second order response equations for R_a were generated with minitab, a statistical software as a function of pressure, traverse speed and isolated abrasive mesh size. Influence of each of these factors on the response were analyzed with 3D response surface plots. Abrasive mesh size was also found be a factor influencing Ra along with traverse speed and …