Manufacturing Commons^™

Annuloplasty Mti: Improved Tooling For Annuloplasty Ring Manufacturing, Justin David Smith, Spencer Lee Combs, Luke Edward Maly

Mechanical Engineering

The complete senior project report was submitted to the project advisor and sponsor. The results of this project are of a confidential nature and will not be published at this time.

Modeling Of Cloud-Based Digital Twins For Smart Manufacturing With Mt Connect, Liwen Hu, Ngoc-Tu Nguyen, Wenjin Tao, Ming-Chuan Leu, Xiaoqing Frank Liu, Rakib Shahriar, S M Nahian Al Sunny

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The common modeling of digital twins uses an information model to describe the physical machines. The integration of digital twins into productive cyber-physical cloud manufacturing (CPCM) systems imposes strong demands such as reducing overhead and saving resources. In this paper, we develop and investigate a new method for building cloud-based digital twins (CBDT), which can be adapted to the CPCM platform. Our method helps reduce computing resources in the information processing center for efficient interactions between human users and physical machines. We introduce a knowledge resource center (KRC) built on a cloud server for information intensive applications. An information model …

Identification System For Heart Valve Manufacturing, Nicholas Robert Jensen, Edgar Davis Nix, Judith Evelyn Gonzalez, Albert Austin Liddicoat

Mechanical Engineering

Abstract withheld due to NDA constraints

Transcatheter Heart Valve Leaflet Assembly Tooling Improvement Final Design Report, James Craig Sherman, Zachary Robert Dicks, Luke Edward Williams

Mechanical Engineering

Statement of Confidentiality: The complete senior project report was submitted to the project advisor and sponsor. The results of this project are of a confidential nature and will not be published at this time.

Composite Suspension For A Mass Market Vehicle, Sarah M. Chapiama, Brian Auyeung, Jose Guerrero, Ethan Lau

Mechanical Engineering

Statement of Confidentiality: The complete senior project report was submitted to the project advisor and sponsor. The results of this project are of a confidential nature and will not be published at this time.

Curb Navigation, Cole A. Tudor, Kaitlyn R. Adams, Robbie Huerta

Mechanical Engineering

The Curb Navigation senior project, proposed by the QL+ organization, was presented to find a solution to an issue a former veteran, Velette, is having. Velette has a difficult time maneuvering curbs when out doing day-to-day errands and activities. The goal of this project is to develop a solution that will give Velette the ability to traverse curbs without the assistance of others or the need to do a wheelie that can lead to an injury. The team has found that adapting and optimizing an anti-tipper design may be the best way to solve the proposed challenge. The team decided …

Dynamic Model For Simulating Motion Of The Right Ventricle, Brian Michael Larsen, Sam Koopman Porter, John Francis D'Ambrosio

Mechanical Engineering

This report documents all the research, ideation, and mockups used to determine right ventricle motion and develop a system capable of reproducing that motion on a tissue sample. The model is intended for evaluating anchoring systems being developed by Edwards Lifesciences for use with tricuspid valve therapies. Several design solutions were considered for the primary functions of recreating motion of the right ventricle and attaching tissue to the device. From these ideas a primary means of producing motion and attaching tissue was selected. These ideas were then developed over the course of a school year to become the final system …

Additive Manufacturing Powder Removal, Madison A. Lignell, Tyler W. Laird, Kurt K. Reed

Mechanical Engineering

Metal powder-bed fusion is an additive manufacturing process which enables the creation of unique shapes in metal parts that would otherwise be difficult, expensive, or impossible to machine. Metallic powder is melted and fused together by either a laser or electron beam to produce parts quickly. The excess powder covers newly printed parts and can be difficult to remove from small internal features. The scope of this project is to design a device that effectively removes the powder from newly printed parts safely, while reclaiming as much powder as possible for reuse. The solution for this project must be able …

Metal Foam Drying Process, Bryce Zander, Ethan Serpa, Daniel Moore, Michael Mullen

Mechanical Engineering

Design and construction of machine to increase the throughput of metal foam that ERG Aerospace produces.

Prove Endurance Car Front Suspension, Lauren A. Williams, Logan Simon, Justine G. Kwan

Mechanical Engineering

This document details the collaborative Mechanical Engineering Senior Project with Cal Poly PROVE Lab on PROVE Lab’s Project 2; an electric vehicle designed to travel 1000 miles on a single charge. Logan Simon, Justine Kwan, and Lauren Williams are given the challenge of designing an innovative proof of concept front suspension suspension for this vehicle.

After detailed research of new suspension systems, it was determined that the innovative nature could be in the form of unique manufacturing methods, materials use, or mechanical design. At this point in time, this vehicle is a purely conceptual design with no concrete requirements. Therefore …

Mechanical Characterization Of Selectively Laser Melted 316l Stainless Steel Body Centered Cubic Unit Cells And Lattice Of Varying Node Radii And Strut Angle, Christopher James Hornbeak

Master's Theses

An experimental study of several variants of radius and strut angle of the body centered cubic unit cell was performed to determine the mechanical properties and failure mechanisms of the mesostructure. Quasi static compression tests were performed on an Instron® universal testing machine with a 50kN load cell at 0.2mm/min. The test samples were built using a SLM Solutions 125 selective laser melting machine with 316L stainless steel. Test specimens were based on 5mm cubic unit cells, with a strut diameter 10% of the unit cell size, with skins on top and bottom to provide a cantilever boundary constraint. Specimens …

Foil-Based Additive Manufacturing System And Method, Hai-Lung Tsai, Yiyu Shen, Yingqi Li, Chen Chen

Mechanical and Aerospace Engineering Faculty Research & Creative Works

An additive manufacturing system, method of manufacturing, and fabricated part. The system uses a material joining laser system to join together foil sheets to form a metal part. The material joining laser system can be configured to join adjacent foil sheets together in a substantially uniform manner. The manufacturing system also includes a material removal system that removes material from selected locations of the foil sheets to shape the foil sheets to correspond with selective slices of the part. The material removal system can be a laser system, such as a laser system configured to remove material from a foil …

Analysis Of Surface Integrity In Machining Of Aisi 304 Stainless Steel Under Various Cooling And Cutting Conditions, F. Klocke, B. Döbbeler, S. Lung, S. Seelbach, Ibrahim S. Jawahir

Institute for Sustainable Manufacturing Faculty Publications

Recent studies have shown that machining under specific cooling and cutting conditions can be used to induce a nanocrystalline surface layer in the workspiece. This layer has beneficial properties, such as improved fatigue strength, wear resistance and tribological behavior. In machining, a promising approach for achieving grain refinement in the surface layer is the application of cryogenic cooling. The aim is to use the last step of the machining operation to induce the desired surface quality to save time-consuming and expensive post machining surface treatments. The material used in this study was AISI 304 stainless steel. This austenitic steel suffers …

A Numerical Investigation Of Bio-Inspired Scaffolds And Surface Textures, Yucong Gu

Graduate Theses and Dissertations

Synthetic scaffolds are widely used as implants to repair bone fracture. Without a proper design, scaffolds could pose significant health risks to the patient and fail to heal the bone properly. A good synthetic scaffold needs to have high porosity and large pore size to allow new bone cells to form on it. However, a scaffold with higher porosity and larger pore size tends to have reduced mechanical strength. Thus, it is important to find a structural design which allows the implant to have a high porosity and large pore size while retaining high strength. In this research, a 3D-printable …

Phase Field Model Of Thermally Induced Phase Separation (Tips) For The Formation Of Porous Polymer Membranes, Ashley Green, Aria Green

Mechanical Engineering Undergraduate Honors Theses

Most membrane research and development has been done through experimental work, which can be costly and time consuming. An accurate computational model would greatly reduce the need for these experiments. The focus of the research presented in this paper is to create an accurate computational model for membrane formation using thermally induced phase separation (TIPS). A phase field model is employed to create this model including the Cahn Hilliard Equation and Flory Huggins Theory. This model produced computational results that correspond well with theoretical and experimental results. The model was then adapted to correspond to the PVDF/DPC polymer-solvent system by …

Influence Of Impact Conditions On Feedstock Deposition Behavior Of Cold-Sprayed Fe-Based Metallic Glass, Constance Ziemian, Wendelin Wright, David E. Cipoletti

Faculty Journal Articles

Cold spray is a promising method by which to deposit dense Fe-based metallic glass coatings on conventional metal substrates. Relatively low process temperatures offer the potential to prevent the crystallization of amorphous feedstock powders while still providing adequate particle softening for bonding and coating formation. In this study, Fe48 Mo14 Cr15 Y2 C15 B6 powder was sprayed onto a mild steel substrate, using a variety of process conditions, to investigate the feasibility of forming well-bonded amorphous Fe-based coatings. Particle splat adhesion was examined relative to impact conditions, and the limiting values of temperature and velocity associated with successful softening and …

Ultrasonic Nondestructive Evaluation Of Metal Additive Manufacturing., Venkata Karthik Nadimpalli

Electronic Theses and Dissertations

Metal Additive Manufacturing (AM) is increasingly being used to make functional components. One of the barriers for AM components to become mainstream is the difficulty to certify them. AM components can have widely different properties based on process parameters. Improving an AM processes requires an understanding of process-structure-property correlations, which can be gathered in-situ and post-process through nondestructive and destructive methods. In this study, two metal AM processes were studied, the first is Ultrasonic Additive Manufacturing (UAM) and the second is Laser Powder Bed Fusion (L-PBF). The typical problems with UAM components are inter-layer and inter-track defects. To improve the …

Design And Implementation Of A Virtual Reality Laboratory For Mechanical Maintenance, Adolfo Enrique Samudio Cano

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of the College of Business and Technology at Morehead State University in partial fulfillment of the requirements for the Degree Master of Science by Adolfo Enrique Samudio Cano on April 27, 2018.

Novelis Teaching Table, Phillip Laplante, Robert Hemker, Taylor Mcgriff, Juan Restrepo, Shelly Abraham

KSU Journey Honors College Capstones and Theses

Novelis is a company that specializes in metal casting, recycling, and rolling. They primarily focus on aluminum rolling for cans and car bodies but are an industry leader in numerous related areas. As the rolling process is not taught in most general engineering courses, Novelis periodically teaches new engineers and technicians about the specifics of this relatively mathematically complex process. Most of the current teaching methods are through PowerPoint presentations and group exercises, with minimal hands-on involvement. One of the most useful tools for teaching the rolling process is an actual jeweler’s rolling mill, which Novelis currently possesses, but is …

Modeling Residual Stress Development In Hybrid Processing By Additive Manufacturing And Laser Shock Peening, Guru Charan Reddy Madireddy

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The term “hybrid” has been widely applied to many areas of manufacturing. Naturally, that term has found a home in additive manufacturing as well. Hybrid additive manufacturing or hybrid-AM has been used to describe multi-material printing, combined machines (e.g., deposition printing and milling machine center), and combined processes (e.g., printing and interlayer laser re-melting). The capabilities afforded by hybrid-AM are rewriting the design rules for materials and adding a new dimension in the design for additive manufacturing paradigm. This work focuses on hybrid-AM processes, which are defined as the use of additive manufacturing (AM) with one …

Effect Of Shot Peening On Stress Corrosion Behavior Of Biodegradable Magnesium We43, Tejaswita Patil

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Conventionally used metals for orthopedic devices made of titanium, stainless steel, and Co-Cr alloys are designed to be permanently implanted. However, long-term complications arise and a secondary implant removal surgery is often necessary. A mismatch in stiffness between the bone and implant results in stress shielding that negatively affects bone density. To overcome these problems, magnesium alloys (e.g., WE34) are favored due to a lower Young’s modulus (45 GPa) and biodegradability. The critical technical barrier with magnesium alloys is their high corrosion rate in physiological (salt-based) environments. One solution is to use surface treatments, such as shot peening (SP), to …

Reducing Stress In 3d Printed Parts Made With Laser Engineered Net Shaping, Shaun Ross Whetten

Mechanical Engineering ETDs

Thermal cycling and repeated melting/solidification cycles characteristic of 3D metal printing processes causes buildup of residual stress in 3D printed parts. Using laser engineered net shaping (LENS®), residual stresses are formed leading to deformation and possible cracking of the 3D printed metal components. The LENS process offers opportunities for rapid prototyping, alternative manufacturing processes, and repair of worn/broken components so it is important to be able to minimize the effects of residual stress. Work was performed to understand the benefit of substrate heating on reducing residual stress in metal parts made using the LENS process. Substrate deformation, and destructive methods …

Developing Nanopore Electromechanical Sensors With Transverse Electrodes For The Study Of Nanoparticles/Biomolecules, Mohammadsadegh Beheshti

LSU Doctoral Dissertations

This study concerns development of a technology of utilizing metallic nanowires for a sensing element in nanofluidic single molecular (nanoparticle) sensors formed in plastic substrates to detect the translocation of single molecules through the nanochannel. We aimed to develop nanofluidic single molecular sensors in plastic substrates due to their scalability towards high through and low cost manufacturing for point-of-care applications. Despite significant research efforts recently on the technologies and applications of nanowires, using individual nanowires as electric sensing element in nanofluidic bioanalytic devices has not been realized yet. This dissertation work tackles several technical challenges involved in this development, which …

Manufacturing Process Simulation – On Its Way To Industrial Application, Dennis Otten, Tobias A. Weber, Jan-Christoph Arent

International Journal of Aviation, Aeronautics, and Aerospace

Manufacturing process simulation (MPS) has become more and more important for aviation and the automobile industry. A highly competitive market requires the use of high performance metals and composite materials in combination with reduced manufacturing cost and time as well as a minimization of the time to market for a new product. However, the use of such materials is expensive and requires sophisticated manufacturing processes. An experience based process and tooling design followed by a lengthy trial-and-error optimization is just not contemporary anymore. Instead, a tooling design process aided by simulation is used more often. This paper provides an overview …

Sensel Morph: Product Communication Improvement Initiative, Kasper W. Lui-Delange, Samuel Distler, Rafael Paroli

Industrial and Manufacturing Engineering

Sensel is a startup company that recently launched their first product. The Morph is a multi-functional touch interface that interacts with a wide range of software through touching enabled silicon overlays. The support documentation was believed to cause confusion, which is leading to limited sales and increased returns. We focused on the structures of its website and product documentation, which were initially developed without end user testing. Our team explored Sensel’s current state to develop two multiphase design alternatives. These designs provide multiple user-facing testing frameworks as well as determine the root-cause of the Morph’s current communication issues. The designs …

Improving Warehouse Capacity For Synergy Manufacturing, Brian Garcia

Industrial and Manufacturing Engineering

This report aims to aid Synergy Manufacturing (a well-recognized producer of high-performance components for off-roading vehicles) to improve in-house production capacity in wake of an expanded facility space and substantial increase in the number of current available products over the span of a few years. Current warehouse issues include struggling to meet demand, high inventory, and an unsafe overcrowding of WIP on the floor space. The steps taken to resolve these issues are to collect setup times, operational times, total process times, machine tool usage, and flow process from a selected group of five high-demand items from Synergy Manufacturing’s current …

Building A Database For A Startup: Boltabout, Danielle Tran

Industrial and Manufacturing Engineering

BoltAbout is a young start-up based out of San Luis Obispo, CA. Their primary business is renting out bikes via monthly-subscription with the opportunity to lease to own. BoltAbout has seen great success over the past 2 years and is looking to expand. The company currently has 200 bikes, but the demand is far outweighing the supply. The CEO of BoltAbout hopes to grow to grow the company’s inventory to 500 bikes by the end of 2017 and 1500 by the end of the school year. As the company continues to expand, it will need to be able to accurately …

Crystal Engineering Manufacturing Facility Analysis, Maximiliano Cortes, Eric Dustin Kornrumpf, Sthefano Alvarado

Industrial and Manufacturing Engineering

This report will encompass a two-quarter long senior project effort to provide a recommendation for the client, Crystal Engineering. Crystal Engineering is currently in the process of introducing three new products, one now and two within the next six months. However, their existing lines already occupy the available production space and as a result, they are unable to determine how to effectively incorporate new production lines within the facility. Therefore, the main objectives of this project were to deliver several facility redesign layouts backed by a holistic justification for each. The formulation of the facility redesign layouts incorporated several industrial …

Cal Poly Rose Float Overheight Mechanism, Ali A. Harake, Breanna H. Tran, Morgan K. Montalvo, Sergio B. Gutierrez

Mechanical Engineering

The Cal Poly Universities jointly build and enter a floral entry, commonly known as a float, into the Pasadena Tournament of Roses Rose Parade. At the end of this parade route, there is a 16’6” bridge all floats must drive under. The scope of our project is to design and build a mechanism roughly described as an “overheight” mechanism, as its function is to raise and lower large heavy structures so the float is able to pass under the bridge. This hydraulic mechanism is powered via the float animation system.

Manufacturing Of A Carbon Fiber Part With Complex Geometry, Caitlyn Pellemeier, Eric Rodan, Alex King, Nicolas Carlucci

Mechanical Engineering

The purpose of this study is to determine the best method for manufacturing a part with precision tolerances and a small deflection requirement. The desired tolerances include a flatness of 0.002in, parallelism of 0.005in, heat tolerance of 60℃, and a max deflection at the loaded end of the part of 0.28mm. To accomplish this, our team uses carbon fiber as the part material because compared to traditional metals it is stiffer and lighter. Carbon fiber molding processes are explored and narrowed down to Liquid Composite Molding (LCM) and Resin Transfer Molding (RTM). These processes use dry fiber combined with epoxy …