Robotics Commons^™

Volumetric Error Compensation For Industrial Robots And Machine Tools, Le Ma

Doctoral Dissertations

“A more efficient and increasingly popular volumetric error compensation method for machine tools is to compute compensation tables in axis space with tool tip volumetric measurements. However, machine tools have high-order geometric errors and some workspace is not reachable by measurement devices, the compensation method suffers a curve-fitting challenge, overfitting measurements in measured space and losing accuracy around and out of the measured space. Paper I presents a novel method that aims to uniformly interpolate and extrapolate the compensation tables throughout the entire workspace. By using a uniform constraint to bound the tool tip error slopes, an optimal model with …

Hydrogen Fuel Cell Gasket Handling And Sorting With Machine Vision Integrated Dual Arm Robot, Devin C. Fowler

College of Graduate Studies: Theses & Dissertations

Recently demonstrated robotic assembling technologies for fuel cell stacks used fuel cell components manually pre-arranged in stacks (presenters), all oriented in the same position. Identifying the original orientation of fuel cell components and loading them in stacks for a subsequent automated assembly process is a difficult, repetitive work cycle which if done manually, deceives the advantages offered by automated fabrication technologies of fuel cell components and by robotic assembly processes. We present an innovative robotic technology which enables the integration of automated fabrication processes of fuel cell components with robotic assembly of fuel cell stacks into a fully automated fuel …

A Hardware-Deployable Neuromorphic Solution For Encoding And Classification Of Electronic Nose Data, Anup Vanarse, Alexander Rassau, Peter Van Der Made

Research outputs 2014 to 2021

In several application domains, electronic nose systems employing conventional data processing approaches incur substantial power and computational costs and limitations, such as significant latency and poor accuracy for classification. Recent developments in spike-based bio-inspired approaches have delivered solutions for the highly accurate classification of multivariate sensor data with minimized computational and power requirements. Although these methods have addressed issues related to efficient data processing and classification accuracy, other areas, such as reducing the processing latency to support real-time application and deploying spike-based solutions on supported hardware, have yet to be studied in detail. Through this investigation, we proposed a spiking …

Routing Algorithm For The Ground Team In Transmission Line Inspection Using Unmanned Aerial Vehicle, Yu Li

Masters Theses

"With the rapid development of robotics technology, robots are increasingly used to conduct various tasks by utility companies. An unmanned aerial vehicle (UAV) is an efficient robot that can be used to inspect high-voltage transmission lines. UAVs need to stay within a data transmission range from the ground station and periodically land to replace the battery in order to ensure that the power system can support its operation. A routing algorithm must be used in order to guide the motion and deployment of the ground station while using UAV in transmission line inspection. Most existing routing algorithms are dedicated to …

Light Touch Based Virtual Cane For Balance Assistance During Standing, Sindhu Reddy Alluri

Masters Theses

"Can additional information about one's body kinematics provided through hands improve human balance? Light-Touch (LT) through hands helps improve balance in a wide range of populations, both healthy and impaired. The force is too small to provide any meaningful mechanical assistance -- rather, it is suggested that the additional sensory information through hands helps the body improve balance.

To investigate the potential for improving human balance through biofeedback through hands, we developed a Virtual Cane (VC) for balance assistance during standing. The VC mimics the physical cane's function of providing information about one's body in space. Balance experiments on 10 …

Controlled Switching In Kalman Filtering And Iterative Learning Controls, He Li

Masters Theses

“Switching is not an uncommon phenomenon in practical systems and processes, for examples, power switches opening and closing, transmissions lifting from low gear to high gear, and air planes crossing different layers in air. Switching can be a disaster to a system since frequent switching between two asymptotically stable subsystems may result in unstable dynamics. On the contrary, switching can be a benefit to a system since controlled switching is sometimes imposed by the designers to achieve desired performance. This encourages the study of system dynamics and performance when undesired switching occurs or controlled switching is imposed. In this research, …

Virtual Morphology As A Method Of Robotic Control, Conner Todd Castle

Graduate Theses, Dissertations, and Problem Reports (ETD)

This thesis presents Virtual Morphology (VM), a method that explores a different perspective on the design of robot autonomy using inspiration from morphological computing and programmed computation. Morphological computation offers physical solutions that solve complex tasks, like robotic grasping of unknown objects, with relative ease. Unfortunately, these physical solutions are difficult to adjust post-development, and are usually designed to complete only one or a few specific tasks. Programmed computational approaches are more flexible because they can be implemented and adjusted through software, but unfortunately, these approaches can become rather complex as tasks become more difficult. This thesis explores the potential …

Immunity-Based Framework For Autonomous Flight In Gps-Challenged Environment, Mohanad Al Nuaimi

Graduate Theses, Dissertations, and Problem Reports (ETD)

In this research, the artificial immune system (AIS) paradigm is used for the development of a conceptual framework for autonomous flight when vehicle position and velocity are not available from direct sources such as the global navigation satellite systems or external landmarks and systems. The AIS is expected to provide corrections of velocity and position estimations that are only based on the outputs of onboard inertial measurement units (IMU). The AIS comprises sets of artificial memory cells that simulate the function of memory T- and B-cells in the biological immune system of vertebrates. The innate immune system uses information about …

Real-Time Classification Of Multivariate Olfaction Data Using Spiking Neural Networks, Arnup Vanarse, Adam Osseiran, Alexander Rassau, Therese O'Sullivan, Jonny Lo, Amanda Devine

Research outputs 2014 to 2021

Recent studies in bioinspired artificial olfaction, especially those detailing the application of spike-based neuromorphic methods, have led to promising developments towards overcoming the limitations of traditional approaches, such as complexity in handling multivariate data, computational and power requirements, poor accuracy, and substantial delay for processing and classification of odors. Rank-order-based olfactory systems provide an interesting approach for detection of target gases by encoding multi-variate data generated by artificial olfactory systems into temporal signatures. However, the utilization of traditional pattern-matching methods and unpredictable shuffling of spikes in the rank-order impedes the performance of the system. In this paper, we present an …

Effective Plant Discrimination Based On The Combination Of Local Binary Pattern Operators And Multiclass Support Vector Machine Methods, Vi N T Le, Beniamin Apopei, Kamal Alameh

Research outputs 2014 to 2021

Accurate crop and weed discrimination plays a critical role in addressing the challenges of weed management in agriculture. The use of herbicides is currently the most common approach to weed control. However, herbicide resistant plants have long been recognised as a major concern due to the excessive use of herbicides. Effective weed detection techniques can reduce the cost of weed management and improve crop quality and yield. A computationally efficient and robust plant classification algorithm is developed and applied to the classification of three crops: Brassica napus (canola), Zea mays (maize/corn), and radish. The developed algorithm is based on the …

Audio To Architecture: House Music As A Form Generator, Polina Timchenko

Architecture Undergraduate Honors Theses

Contemporary music undergoes similar process of creation to that of the design process through computation and variation. House music as a representation of contemporary culture has a layered structure that allows specific characteristics to identify it as house music. Song components can vary and mix in different orders that form new dynamic compositions. I am going to explore the idea that every house music component can be translated into geometry with the use of parametric design techniques.

Localization Using Convolutional Neural Networks, Shannon D. Fong

Computer Engineering

With the increased accessibility to powerful GPUs, ability to develop machine learning algorithms has increased significantly. Coupled with open source deep learning frameworks, average users are now able to experiment with convolutional neural networks (CNNs) to solve novel problems. This project sought to train a CNN capable of classifying between various locations within a building. A single continuous video was taken while standing at each desired location so that every class in the neural network was represented by a single video. Each location was given a number to be used for classification and the video was subsequently titled locX. These …

Collaborative Robotic Path Planning For Industrial Spraying Operations On Complex Geometries, Steven Brown

Graduate Theses and Dissertations

Implementation of automated robotic solutions for complex tasks currently faces a few major hurdles. For instance, lack of effective sensing and task variability – especially in high-mix/low-volume processes – creates too much uncertainty to reliably hard-code a robotic work cell. Current collaborative frameworks generally focus on integrating the sensing required for a physically collaborative implementation. While this paradigm has proven effective for mitigating uncertainty by mixing human cognitive function and fine motor skills with robotic strength and repeatability, there are many instances where physical interaction is impractical but human reasoning and task knowledge is still needed. The proposed framework consists …

A Scalable, Chunk-Based Slicer For Cooperative 3d Printing, Jace J. Mcpherson

Computer Science and Computer Engineering Undergraduate Honors Theses

Cooperative 3D printing is an emerging technology that aims to increase the 3D printing speed and to overcome the size limit of the printable object by having multiple mobile 3D printers (printhead-carrying mobile robots) work together on a single print job on a factory floor. It differs from traditional layer-by-layer 3D printing due to requiring multiple mobile printers to work simultaneously without interfering with each other. Therefore, a new approach for slicing a digital model and generating commands for the mobile printers is needed, which has not been discussed in literature before. We propose a chunk-by-chunk based slicer that divides …

Autonomous Collision Avoidance In Small Scale Vehicles, Justin T. Sharpe

Honors Theses

The undergraduate research performed in this study focused on autonomous collision avoidance in small scale vehicles. The goal of this study was to find equipment to build a fully autonomous small scale vehicle for use in different applications. Radio frequency communication, ultrasonic sensors, and single board computers were used to create an autonomous vehicle for multiple applications. Different communication protocols and sensors were investigated, and an explanation was specified concerning the hardware choice. The main communication protocol tested was Long Range Wide Area Network, and the main electronics tested and used were ultrasonic sensors, First Person View cameras, and the …

“New” Subjects In Mechatronics Management Education, Peter Kopacek

International Journal of Business and Technology

Process – and manufacturing automation as well as robotics are currently one of the fast growing fields in automation. Advanced process control, cyber-physical systems, industry 4.0 and “advanced robots” are no longer a headline. They are in realization. As a consequence of these developments new social, ethical and human questions appear.

Therefore this contribution is a first report about the continuous “modernization” of the Mechatronics Management BSc and MSc programs which are successful running at UBT. Both programs were developed in the framework of two TEMPUS projects from an international consortium from 2006 to 2009. Since that time new “buzzwords” …

Optimal Control Of Dc Motors Using Pso Algorithm For Tuning Pid Controller, Arnisa Myrtellari, Petrika Marango, Margarita Gjonaj

International Journal of Business and Technology

The DC motors are widely used in the mechanisms that require control of speed. Different speed can be obtained by changing the field voltage and the armature voltage. The classic PID controllers are widely used in industrial process for speed control. But they aren’t suitable for high performance cases, because of the low robustness of PID controller. So many researchers have been studying various new control techniques in order to improve the system performance and tuning PID controllers. This paper presents particle swarm optimization (PSO) method for determining the optimal PID controller parameters to find the optimal parameters of DC …

Cloud Oriented Additive Technology Use For Fast Prototype Development, Betim Shabani, Vladimir Dukovski

UBT International Conference

Digitalization has already affected every segment of the industry and especially manufacturing. Based on market requires that are more specific and faster than ever, there is a need to use some of the online platform packages called Cloud Manufacturing (CM). CM operate through the digital data then here comes the expression CAD models or in particular STL files that are currently adequate for Additive Technologies (AT). On the other hand, there is a rapid increase in the measurement aspects via non-contact forms (3D scanners) where their data are stored in various digital formats: IGES, OBJ, PLY, etc.). Those formats can …

The Importance Of Cad/Cae Systems In Development Of Product Design And Process Of Optimization, Fatmir Azemi, Xhemajl Mehmeti, Bekim Maloku

UBT International Conference

Computer Aided Design (CAD) and Computer Aided Engineering (CAE) are the most important technology tools that today designers are using in development of product (design and in process of optimization). Thus, this study is carried out to present the importance of CAD/CAE system on process of design and process of optimization of spur gear. The paper presents the usage of CAD system for modeling parts and CAE software for analysis of stress-strain of spur gear and the results of calculation of pair spur-gears that it used in the gearbox transmission of the bucket wheel excavator located in “Bardhi i Madh …

Designing A Controller Via Simulated Annealing, Zemerart Asani, Selvet Rexhepi

UBT International Conference

With Proportional-Integral-Derivative (PID) controllers being widely used in industry for optimum solutions. Optimization of the PID controller is an important problem in Control Engineering. Therefore, in this paper work we have implemented Simulated Annealing to tune the controller parameters. Optimizing the controller parameters on the basis of the Simulated Annealing algorithm, based on criteria defined using an objective function, allows us to find optimal solutions for the controller parameters that give us minimum error. In terms of performance, the PID controller designed with Simulated Annealing gives us great results with regard to the rise time, settling time, overshoot and steady-state …

Reinforcement Learning In Robotic Task Domains With Deictic Descriptor Representation, Harry Paul Moore

LSU Doctoral Dissertations

In the field of reinforcement learning, robot task learning in a specific environment with a Markov decision process backdrop has seen much success. But, extending these results to learning a task for an environment domain has not been as fruitful, even for advanced methodologies such as relational reinforcement learning. In our research into robot learning in environment domains, we utilize a form of deictic representation for the robot’s description of the task environment. However, the non-Markovian nature of the deictic representation leads to perceptual aliasing and conflicting actions, invalidating standard reinforcement learning algorithms. To circumvent this difficulty, several past research …

A Novel Indoor Positioning System For Firefighters In Unprepared Scenarios, Vamsi Karthik Vadlamani

Electrical and Computer Engineering ETDs

Situational awareness and indoor positioning of firefighters are types of information of paramount importance to the success of search and rescue operations. GPS units are undependable for use in Indoor Positioning Systems due to their associated mar- gins of error in position and their reliance on satellite communication that can be interrupted inside large structures. There are few other techniques like dead reck- oning, Wifi and bluetooth based triangulation, Structure from Motion (SFM) based scene reconstruction for Indoor positioning system. However due to high temper- atures, the rapidly changing environment of fires, and low parallax in the thermal images, the …

Project Janus, Theodore J. Lilyeblade, Jacqueline Worley, Garrison Bybee

Undergraduate Research Symposium - Prescott

The development goal of Project Janus is to design, fabricate, and program two robotic heads that can serve as animatronic chatbots. Each robotic head will be equipped with two USB webcams, a mono speaker within the robot’s mouth, and a pair of microphones. Additionally, each robotic head will feature a three degree of freedom neck, a one degree-of-freedom jaw, and a two degree-of-freedom gimbal for the eyes upon which the cameras will be mounted. The robotic heads will be interfaced to separate internet connected personal computers. Through these computers, they will make use of online speech recognition tools, online chatbots, …

A Dexterous, Glove-Based Teleoperable Low-Power Soft Robotic Arm For Delicate Deep-Sea Biological Exploration, Brennan T. Phillips, Kaitlyn P. Becker, Shunichi Kurumaya, Kevin C. Galloway, Griffin Whittredge, Daniel M. Vogt, Clark B. Teeple, Michelle H. Rosen, Vincent A. Pieribone, David F. Gruber, Robert J. Wood

Publications and Research

Modern marine biologists seeking to study or interact with deep-sea organisms are confronted with few options beyond industrial robotic arms, claws, and suction samplers. This limits biological interactions to a subset of “rugged” and mostly immotile fauna. As the deep sea is one of the most biologically diverse and least studied ecosystems on the planet, there is much room for innovation in facilitating delicate interactions with a multitude of organisms. The biodiversity and physiology of shallow marine systems, such as coral reefs, are common study targets due to the easier nature of access; SCUBA diving allows for in situ delicate …

Exploring The Effect Of Different Numbers Of Convolutional Filters And Training Loops On The Performance Of Alphazero, Jared Prince

Masters Theses & Specialist Projects

In this work, the algorithm used by AlphaZero is adapted for dots and boxes, a two-player game. This algorithm is explored using different numbers of convolutional filters and training loops, in order to better understand the effect these parameters have on the learning of the player. Different board sizes are also tested to compare these parameters in relation to game complexity. AlphaZero originated as a Go player using an algorithm which combines Monte Carlo tree search and convolutional neural networks. This novel approach, integrating a reinforcement learning method previously applied to Go (MCTS) with a supervised learning method (neural networks) …

Deep Rc: Enabling Remote Control Through Deep Learning, Jaron Ellingson, Gary Ellingson, Tim Mclain

Student Works

Human remote-control (RC) pilots have the ability to perceive the position and orientation of an aircraft using only third-person-perspective visual sensing. While novice pilots often struggle when learning to control RC aircraft, they can sense the orientation of the aircraft with relative ease. In this paper, we hypothesize and demonstrate that deep learning methods can be used to mimic the human ability to perceive the orientation of an aircraft from monocular imagery.

This work uses a neural network to directly sense the aircraft attitude. The network is combined with more conventional image processing methods for visual tracking of the aircraft. …

Enhancing 3d Visual Odometry With Single-Camera Stereo Omnidirectional Systems, Carlos A. Jaramillo

Dissertations, Theses, and Capstone Projects

We explore low-cost solutions for efficiently improving the 3D pose estimation problem of a single camera moving in an unfamiliar environment. The visual odometry (VO) task -- as it is called when using computer vision to estimate egomotion -- is of particular interest to mobile robots as well as humans with visual impairments. The payload capacity of small robots like micro-aerial vehicles (drones) requires the use of portable perception equipment, which is constrained by size, weight, energy consumption, and processing power. Using a single camera as the passive sensor for the VO task satisfies these requirements, and it motivates the …

A Hands-On Robotics Concentration Curricula In Engineering Technology Programs, Andy S. Zhang, Angran Xiao, Yu Wang, Farrukh Zia, Muhammad Ummy

Publications and Research

This paper discusses the creation of a robotic concentration with four courses to meet the industry demands for qualified graduates in product design and services. Advances in computer technology and electronics have created a new field called mechatronics. Nowadays almost all high tech products are mechatronics in nature. Products such as automotive subsystems (such as anti-lock braking systems and automatic steering systems), medical devices, environmental monitoring systems, service and surgical robots are all mechatronic products. The robotic concentration focus on one of the most popular and visible area of mechatronics: robotics. The creation of the four courses: Embedded Systems Fundamentals, …

Micro-Manipulation Using Learned Model, Matthew A. Lyng, Benjamin V. Johnson, David J. Cappelleri

The Summer Undergraduate Research Fellowship (SURF) Symposium

Microscale devices can be found in applications ranging from sensors to structural components. The dominance of surface forces at the microscale hinders the assembly processes through nonlinear interactions that are difficult to model for automation, limiting designs of microsystems to primarily monolithic structures. Methods for modeling surface forces must be presented for viable manufacturing of devices consisting of multiple microparts. This paper proposes the implementation of supervised machine learning models to aid in automated micromanipulation tasks for advanced manufacturing applications. The developed models use sets of training data to implicitly model surface interactions and predict end-effector placement and paths that …

Prototype Of A Fish Inspired Swimming Silk Robot, Cassandra M. Donatelli, Sarah A. Bradner, Juanita Mathews, Erin Sanders, Casey R. Culligan, David Kaplan, Eric D. Tytell

Engineering Faculty Articles and Research

Elongate fishes have evolved hundreds of times throughout the tree of life. They occupy many aquatic environments, from streams and ponds to the deepest parts of the ocean. Due to their long body and numerous vertebrae, they are also highly flexible animals, which makes them useful as bioinspiration for designs in the field of soft robotics. We present a biodegradable soft robot prototype, inspired by elongate fishes. The robot's body is primarily composed of a silk hydrogel with embedded fibers to mimic the structure of natural fish skin. When actuated at the front, the flexible gel prototype mimics the undulatory …