Robotics Commons^™

Robotic Air Hockey Table, William Forcey, Andrew Piunno, Kaden Carpenter, Xander Zavatchen

Williams Honors College, Honors Research Projects

Air hockey, a popular arcade game, is traditionally designed for two players. This limits the game’s accessibility for individuals who wish to practice or enjoy it as a single player. To solve this problem, a robotic system was implemented to play air hockey against a human player. The speed and acceleration of the puck and mallet were measured from a game played between humans to inform the required movement capabilities of the robot. The robotic opponent implemented observes the location of the puck on the table using a camera and predicts where it will be in the future. A Cartesian …

Autonomous Landscape Exploration Rover Using Imaging Surface Navigation (Alexis), Noah Jones, Dominic Salupo

Williams Honors College, Honors Research Projects

The objective is to develop a small-form-factor rover prototype that can be used to prove out a novel traversal method for use on extraterrestrial surfaces. The novel traversal method being proposed is LIDAR/CV-enhanced navigation, provided by a detachable flight vehicle that can communicate with the rover. On planets with thin atmospheres, cold gas thrusters or similar may be needed, but for the scope of this project more traditional flight/propulsion methods will be used.

Mobile Robot Adhesion Methodology And Development Of An Automatous Robot Module, Lauren Baird, Zachariah Stone, Madison Lemons, Jonathon Moody

Williams Honors College, Honors Research Projects

Due to the increasing availability of space travel as not only a scientific exploration but a commercial exploration, there is a need for an onsite repair station that can be deployed in the event of aircraft maintenance, damage, or failure. We have been tasked with researching and creating a prototype of an automatous robot that can be attached to a spacecraft body, move along the surface while avoiding obstacles, scan for damage, 3D print a repair piece, and then make the repair, all without the need of direct human input. Our team, as will be discussed throughout, was tasked with …

Children's Hospital Animatronic, Erin Keller, Wesley Cunningham, Dylan Mueller, Carl Richter

Williams Honors College, Honors Research Projects

This senior project explores the development of a pediatric-oriented animatronic designed to enhance the hospital experience for children. Recognizing the importance of alleviating the anxiety and fear that often accompany hospital visits, the project focuses on creating an engaging and interactive companion to soothe children.

Key components of this project include:

1. Creative Design: The animatronic character's design prioritizes child-friendliness, employing research into child psychology and preferences to ensure an appealing and approachable aesthetic.

2. Electrical and Mechanical Engineering: A robust mechanical and electronic system was engineered to enable lifelike movements, gestures, and responses.

3. Interactive Features: A simple, user-friendly app will be …

   ---

   Go to article

Development Of A Solidworks Api, Andrew Magyar

Williams Honors College, Honors Research Projects

With the current advancements in CAD software, and precision of modern motors, we believe that a new way to communicate from hardware to software is possible. This report details the steps we have taken to attempt just that. The essential idea behind this is that modern controls for robotics are not as user friendly as they can be. The general action taken is to create an API for SolidWorks that connects it to the other necessary controller software and makes it so that a robot, and its exact current position, can be changed simply and intuitively from SolidWorks. Furthermore, the …

Autonomous Damage And Structure Scanning Drone, Natasha Ninan, Amber Long, Lee Nestor, Emmanuel Jensen

Williams Honors College, Honors Research Projects

Remote damage analysis plays a crucial role in lowering the risk associated with human presence at dangerous sites. This project focuses on developing a system for remote structural examination using photogrammetric techniques and analysis. The system utilizes a drone equipped with cameras for photogrammetry, and LiDARs for navigation. This setup can enable efficient structural model generation with the collection of images from multiple points. A novel structural analysis is performed to detect potential damage or points of failure in the structure.

Key components include a teleoperated drone, a software pipeline for photogrammetric analysis, collision protection mechanisms, and a user interface. …

Autonomous Basketball Court Creation Robot, Bryce Haldeman, Tyler Gray, Dalon Vura

Williams Honors College, Honors Research Projects

The Autonomous Basketball Court Outlining System presents a comprehensive solution for precision court marking. Powered by a 24V lithium-ion battery and driven by a single ST microcontroller, the system autonomously marks the outline of a half basketball court using predefined algorithms. User-friendly features include easy loading of marking material, actuated by gravity or a small servo motor depending on material of choice, ensuring intuitive operation. Safety is prioritized, with the servo motor eliminating high-pressure concerns, and the system maintains a controlled speed accounting for user well-being. Two step and direction servo motors enable accurate linear displacement, facilitating straight lines, and …

Human Tracking Function For Robotic Dog, Andrew Sharkey

Williams Honors College, Honors Research Projects

With the increase the increase in automation and humans and robots working side by side, there is a need for a more organic way of controlling robots. The goal of this project is to create a control system for Boston dynamics robotic dog Spot that implements human tracking image software to follow humans using computer vision as well as using hand tracking image software to allow for control input through hand gestures.

Space Force Design Project, Emily Greene, Ashton Orosa, Julia Patek, Nathan Doty

Williams Honors College, Honors Research Projects

The objective of our research project is to develop a lab testbed composed of a curved surface to represent a spacecraft hull, a mobile robot equipped with repair tools, and a robotic arm equipped with a laser 3D scanner. This project is part of a larger grant to the University of Akron from Space Force and Air Research Labs. The lab testbed developed in this project will be used to assist in creating and testing a software and algorithm to inspect and repair spacecraft while in orbit. The project will involve researching spacecraft hulls to create an accurate simulation bed, …

Garden Bot: Autonomous Home Garden Weed Removal Robot, Brendon Lovejoy, Robert Connolly, Isaac Lucas, Stevan Veselinov

Williams Honors College, Honors Research Projects

With frequent weeding being a tedious chore and an essential task for a successful garden, there is need for an automated method of handling this routine. Existing technologies utilize computer vision, GPS, multiple units and other tools to remove weeds from garden plots. However, these solutions are often complex and expensive, suited for large agricultural plots in contrast to small-scale home gardens. In addition, many of these technologies, along with manual tillers and cultivators suited for home use, are unable to perform weeding within rows of crops in a process known as intra-row weeding. The Garden Bot is an autonomous, …

Cardbot, Jakob Reiter, Grant Crump, Drake Drivere, Adam Miner

Williams Honors College, Honors Research Projects

Many people enjoy playing cards but playing cards in the times of COVID-19 is difficult. There are many designs for dealing and shuffling robots, but few include sanitization and autonomous operation. This design is for a BlackJack card dealing and shuffling robot that will be autonomous and will sanitize the playing cards using UV-C LEDs. This will assist in keeping the user safe while playing a game of BlackJack

Ping Pong Ball Collecting Robot, Gina Lanese, Jason Colonna, Sarah Kuchcinski, Johndavid Rogers

Williams Honors College, Honors Research Projects

The ping pong ball collecting robot will collect ping pong balls in a ping pong arena, such as after a game or practice session. Ball collection is now typically done by a human, collecting the balls either by hand or with a net. A robot, autonomously collecting the ping pong balls from the floor, would allow for the time spent playing or practicing to be maximized. The team will design the software and hardware for the robot, including the mechanical system, the software, and circuit boards. This robot will serve as a capstone project for the senior design team consisting …

Light Loaded Automated Guided Vehicle, Marcus Radtka, Nazar Paramashchuk, Lawrence Shevock

Williams Honors College, Honors Research Projects

The objective of the locomotion system was to design and implement the mechanical, electrical, and software related functions to ensure the LLAGV had the capability of maneuvering its surroundings. The LLAGV’s motors were represented in an open loop transfer function to utilize RPM feedback and a compensator when needed. The modeled compensator helped control the LLAGV’s speed and acceleration, enabling further control of the LLAGV. The internal circuitry has the means to properly distributed power to all components and allowed the user to control the LLAGV to their desire. The application software within the LLAGV locomotion system (LLAGV-LS) had consideration …

Autonomous Combat Robot, Andrew J. Szabo Ii, Chris Heldman, Tristin Weber, Tanya Tebcherani, Holden Leblanc, Fabian Ardeljan

Williams Honors College, Honors Research Projects

This honors project will also serve as an engineering senior design project.

The objective is to design and build the software and electrical systems for a 60 lb weight class combat robot that will function autonomously and outperform manually driven robots during competition.

While running autonomously, the robot will use LiDAR sensors to detect and attack opponent robots. This robot will also be able to be remote controlled in manual mode. This will mitigate the risk in case the autonomy or sensors fail. LED lights on the robot will indicate whether it is in autonomous or manual mode. The system …

Autonomous Uav Battery Swapping, Reed Jacobsen, Nikolai Ruhe, Nathan Dornback

Williams Honors College, Honors Research Projects

One of the main hindrances of unmanned aerial vehicle (UAV) technology are power constraints. One way to alleviate some power constraints would be for two UAVs to exchange batteries while both are in flight. Autonomous mid-air battery swapping will expand the scope of UAV technology by allowing for indefinite flight times and longer missions. A single board computer will control each UAV’s flight software to respond to inputs to align with each other mid-flight. When the two UAVs have joined, mechanical components will exchange a depleted battery on the worker UAV for a freshly charged battery that belongs to the …

Underwater Robot, Joseph E. Beck, Matthew Crislip, Cody Bobek, Peyton Lucas

Williams Honors College, Honors Research Projects

Remotely Operated Vehicles (ROVs) are remote controlled drones operated by a non-local user. The ROV we plan to build is connected by a tethering wire to a floating buoy that contains an antenna which will send signals between the base station and the ROV. The ROV is equipped with a video camera, ballast system, propulsion system, lights, and a depth sensor. The ROV will transmit a live video feed to the user, while receiving input signals to control its movement from the base station.

Packmule, Jared M. Alexander, Jared J. Ford, Timothy J. Griffiths, Andray Pennington

Williams Honors College, Honors Research Projects

People face demands of hauling equipment and belongings with them every day, whether it be for work or leisure. This design report discusses and details a product that would allow people to overcome the struggles of this. The Packmule is an autonomous following robot that has the capability of carrying a load up to 30 pounds. The design involves two independently controlled motors operating two drive wheels so that the Packmule will be flexible in the directions it can move. There are also two more steering wheels for support of the base and the load inside. The way in which …

Intelligent Ground Vehicle Competition, Austin R. Tyler, Chris R. Estock, Johnathan P. Johenning, Garrett W. Chonko, Allen C. Gilleland

Williams Honors College, Honors Research Projects

The Intelligent Ground Vehicle Competition (IGVC) draws teams from various universities to compete in the annual autonomous vehicle challenge at the Oakland University campus. To compete, a vehicle must be fully autonomous and can navigate a course designated by various obstacles and painted white lines. Some design challenges are motor control, navigation, environment sensing and safety. A complex navigation system will utilize several tools including a high-precision differential GPS. The vehicle’s surroundings will be mapped using a combination of Light Detection and Ranging (LiDAR) and computer-vision enabled imaging. To comply with IGVC rules, the vehicle must also follow several safety …

Autonomous Robot Sphere, Robert Haver, Melissa Haver, Daniel Madden, Noah Robertson

Williams Honors College, Honors Research Projects

The Autonomous Robot Sphere is an interactive robot toy meant to entertain kids. The robot will locate its target and execute algorithms to autonomously evade or chase a child. The sphere will contain a platform equipped with four omni-wheels, which will allow the sphere to maneuver and change direction almost instantaneously. The robot will be configured to maintain a fixed distance from the transmitter, allowing it to chase or evade the child in response to their movement. The primary advantage of our design lies in its capability to quickly adapt to changes in direction.

Generalized Mapping And Object Removal, Duncan Campbell

Williams Honors College, Honors Research Projects

Simultaneous localization and mapping (SLAM) is a problem that has been explored for the past few decades. SLAM deals with the concept of a robot being introduced into an environment in which it has no prior knowledge. Then, through the use of sensors, the robot is able to map its environment while simultaneously determining its position within the given area. While there has been extensive research into the development of methods by which this problem can be solved, not much has been done on what to do with the resulting maps once they are produced. The research conducted deals with …