Robotics Commons^™

Productivity And Quality Evaluation In Assembly Using Collaborative Robots, Carlos F. Manzanares Vega

Open Access Theses & Dissertations

In Industry 4.0, various technologies have been applied to achieve automation for traditional manufacturing and practices. For this reason, Smart Manufacturing (SM) environments utilize collaborative robots for process optimization by integrating the Internet of Things (IoT). Cobots are equipped with sensors and/or other devices to be able to transmit data in real-time while performing their tasks. Consequently, such SM implementations improves the decision making and business development, such as supply chain and operations, by sharing real-time data from a plant operational level. The collaborative robots are also designed to safely interact and collaborate with humans to perform tasks and optimize …

Intelligent Autonomous Inspections Using Deep Learning And Detection Markers, Alejandro Martinez Acosta

Open Access Theses & Dissertations

Inspection of industrial and scientific facilities is a crucial task that must be performed regularly. These inspections tasks ensure that the facilityâ??s structure is in safe operational conditions for humans. Furthermore,the safe operation of industrial machinery, is dependent on the conditions of the environment. For safety reasons, inspections for both structural integrity and equipment is often manually performed by operators or technicians. Naturally, this is often a tedious and laborious task. Additionally, buildings and structures frequently contain hard to reach or dangerous areas, which leads to the harm, injury or death of humans. Autonomous robotic systems offer an attractive solution …

Tram System Automation For Environmental Spectroscopy And Vegetation Monitoring, Enrique Anguiano Chavez

Open Access Theses & Dissertations

Spectroscopy is the science of studying the interactions of matter and electromagnetic radiation (EMR). In particular, field spectroscopy takes place in a natural environment with a natural source of EMR. The paper presents progress towards the development and automation of a tram cart system. The new system in development collects high resolution, hyperspectral images and data from a spectrometer. Alternatives for a sensor cover mechanism to provide cover for the sensors mounted while the system is not operating are discussed, analyzing and comparing the benefits and disadvantages. An implementation for a charging station in an environment isolated from the electric …

A Comprehensive And Modular Robotic Control Framework For Model-Less Control Law Development Using Reinforcement Learning For Soft Robotics, Charles Sullivan

Open Access Theses & Dissertations

Soft robotics is a growing field in robotics research. Heavily inspired by biological systems, these robots are made of softer, non-linear, materials such as elastomers and are actuated using several novel methods, from fluidic actuation channels to shape changing materials such as electro-active polymers. Highly non-linear materials make modeling difficult, and sensors are still an area of active research. These issues have rendered typical control and modeling techniques often inadequate for soft robotics. Reinforcement learning is a branch of machine learning that focuses on model-less control by mapping states to actions that maximize a specific reward signal. Reinforcement learning has …

A New Approach To Multiplanar, Real-Time Simulation Of Physiological Knee Loads And Synthetic Knee Components Augmented By Local Composition Control In Fused Filament Fabrication, Joshua Taylor Green

Open Access Theses & Dissertations

Despite numerous advances in biomedical engineering, few developments in surgical simulation have been made outside of computational models. Cadavers remain the primary media on which surgical research and simulation is conducted. Most attempts to quantify the effects of orthopedic surgical methods fail to achieve statistical significance due to limited quantities of cadaver specimen, large variations among the cadaver population, and a lack of repeatability among measurement techniques. The general purpose of the research covered in this dissertation is to develop repeatable simulation of physiological loads and develop techniques to fabricate a synthetic-based replacement of cadaver specimens. Future work applying this …

Development Of A Desktop Material Extrusion 3d Printer With Wire Embedding Capabilities, Jose Francisco Motta

Open Access Theses & Dissertations

Printed circuit boards (PCB) have been widely used as a permanent solution for generating complex circuitries to power electronic devices. Over the years, PCB boards have proved to be reliable when powering electronic devices. However, when fabricating a printed circuit board, one must outsource to fabricate the boards when in prototype phase. Therefore, the risk of intellectual property theft and long lead time is an issue. The objective of this Thesis is to develop a hybrid multi-tool desktop material extrusion 3D printer that allows for easy integration (modularity) of tools to generate multi-functional 3D printed components.

The addition of an …

Safety Airway For Small Unmanned Aerial Vehicles Using A Gas Particles Behavior Analogy, Pablo Rangel

Open Access Theses & Dissertations

The United States Federal Aviation Administration (FAA) implemented the Part 107 legislation to allow the flight of Unmanned Aerial Vehicles (UAV) for commercial use (i.e. package deliveries, power transmission line inspections, etc.) in the National Airspace System (NAS). As a consequence of the newly introduced rules, there is an increased risk for accidents involving injured bystanders or damaged to property. The work within this document defines a UAV to UAV safety distance model that acts as a range sensor enabled "elastic bubble". The length of the UAV safety bubble contracts and expands upon changing airway wind speed conditions. It also …

Multi-3d System: Advanced Manufacturing Through The Implementation Of Material Handling Robotics, Jose Luis Coronel Jr.

Open Access Theses & Dissertations

Since the rise of additive manufacturing (AM), innovation has been at the forefront. Additive Manufacturing systems that incorporate complex processes are steadily being developed. One example is the Multi3D System, which was designed to integrate the ability to print multi-material parts with that of embedding electronics. To achieve this automated process, the Multi3D incorporates a six-axis robotic arm to transfer a build platform containing a printed part, to various manufacturing stations (two fused deposition modeling (Stratasys, FDM400mc) systems and a computer numerical control router (Techno CNC Router). The robot is a Yaskawa Motoman MH50 chosen for its payload capacity of …

E-Quality Design Of Experiments For Structural Electronics, Oscar Murga

Open Access Theses & Dissertations

Additive Manufacturing (AM) is a technology utilized for creating complex parts by adding layers of material in order to create a three dimensional functional part. This technology has been pushed to a new level of functionality where mechanical parts are combined with electronic components to create Three-Dimensional Structural Electronics (3DSE) systems. This new technology has been used to replace Printed Circuit Boards (PCB), for 3D SE are light weight and can be created in any desired shape. Computer Aided Design (CAD) software is used to design the part and a Fused Deposition Modeling (FDM) machine is used to 3D print …

Multi-Objective Border Patrolling Optimization Using Game Theory And Evolutionary Algorithms, Franciso Oswaldo Aguirre

Open Access Theses & Dissertations

Border security has evolved significantly since the days when no more than 75 Mounted Guards patrolled the U.S. border in the early 1900's. The border region includes thousands of miles of both land and maritime borders that must be controlled, as well as commercial transportation networks. One of the primary components of the Department of Homeland Security (DHS) is the U.S. Customs and Border Protection (CBP) agency. One of the most typical activities performed by CBP is patrolling the expansive open areas in between official points of entry (POEs) to prohibit illegal entry attempts. Roving patrols are routinely conducted by …

Sensor-Based Robotic Learning System For The Rehabilitation Of Arm, Chethan Ramachandra Keladi

Open Access Theses & Dissertations

In recent studies, the neurological studies has shown that the neurological disorders like Stroke, Parkinson's disease, Dystonia, Spinal Cord Injury (SCI), Cerebral Palsy (CP), etc., cause the disability of upper limb and one of the major issues with the neurological injuries is motor impairment. This issue is caused by the lack of interaction between the central nervous system (CNS) and muscles [1] and can be cured by the intensive training which includes repetitive and reaching tasks. The intensive training can be performed using conventional therapy and robot-assisted therapy, but the research has shown additional effects on motor recovery and functional …

E-Quality: Using Dimensional Index Values Towards Improving Classification Accuracy, Prashanth Devaram

Open Access Theses & Dissertations

E-quality is a process through which inspection of the process and quality of the part produced is done online resulting in the improvement of the process and reduction in the amount of time consumed for the overall process. Automated quality control involves using a methodology to classify the parts based on the dimensions of the features on a part. However, achieving 100% classification accuracy is not an easy task, especially in area of quality control where small differences in dimensions result in part fall into a different category. In this study, a novel approach for modifying the data before being …

Health Prognisis Of Electronics Via Power Profiling, Jonathan Amilcar Cervantes

Open Access Theses & Dissertations

The objective of this research is to investigate a new approach for the early detection of latent defects in electronic devices in the field. Reliability is assessed through the non-traditional approach of recording and evaluating the power profile of electronic devices within a deterministic state of operation. Traditionally, measuring the quiescent current (Iddq) of a device has been employed in manufacturing tests to detect defective parts prior to deployment to the field. However, the monitoring of the deterministic power signature (i.e. boot up or during a self-test routine) has never been exploited to monitor the health of a device in …