Robotics Commons^™

3d Printed Portable Automatic Pill Dispenser​, Amber M. Ocasio

Publications and Research

Medication adherence is a major public health concern, particularly among patients with chronic illnesses. Reports from the National Institutes of Health indicate that adherence rates are significantly lower for chronic conditions, with patients taking only ~50% of medications prescribed. Unintentional non-adherence—such as forgetting doses—is more prevalent (62.9%, 47.1%, 46.9%) than intentional non-adherence, and the consequences include medication waste, disease progression, reduced functional abilities, lower quality of life, and increased reliance on medical resources. Because existing automatic pill dispensers cost over $100 on average, they remain inaccessible for many lower-income patients who could benefit from such technology. This project addresses this …

Low Cost Additive Manufacturing Of Segmented Stator Composite Polymer Permanent Magnet Dc Motors, Ben Goldberg, Jordan Bailey, Connor Hawkins, Colin Haskins, Razvan Voicu

Symposium of Student Scholars

This study presents a novel approach to the design, manufacture, and optimization of segmented stators for composite construction axial flux permanent magnet DC motors. Traditional axial flux stator manufacturing is both challenging and expensive, creating a bottleneck in rapid prototyping and innovation. To overcome these limitations, the stator is divided into individually fabricated segments using advanced composite polymer materials and low-cost additive manufacturing techniques. This segmentation not only drastically reduces production complexity and cost but also allows for customized coil geometries that maximize the surface area for improved heat dissipation.

A key innovation of our design is the integration of …

Advancing Prosthetic Technology: 3d-Printed Robotic Arm With Micro Linear Actuators, Vu Tran, Nathan Reed, Mahdi Yazdanpour

Posters-at-the-Capitol

The increasing demand for affordable and accessible prosthetic solutions has driven innovation in the field of robotics. In this project, we present the design and development of a 3D-printed robotic prosthetic arm aimed at addressing the challenges faced by individuals with upper limb amputations. Our prosthetic arm utilizes five micro linear actuators to achieve precise and naturalistic movement. The design of the prosthetic arm prioritizes affordability and accessibility, with a focus on leveraging 3D printing technology to reduce manufacturing costs and enable customization. The use of micro linear actuators offers advantages in terms of compactness, lightweight construction, and efficient power …

Gesture-Based American Sign Language (Asl) Translation System, Kayleigh Moore, Stefano Pecile, Mahdi Yazdanpour

Posters-at-the-Capitol

According to the World Health Organization (WHO), over 5% of the world's population experiences severe hearing loss. Approximately 9 million people in the U.S. are either functionally deaf or have mild-to-severe hearing loss. In this research, we designed and implemented a translation interface which turns American Sign Language (ASL) gestures captured from a pair of soft robotic gloves into text and speech instantaneously.

We used a combination of flex sensors, tactile sensors, and accelerometers to recognize hand gestures and to record hand and fingers positions, movements, and orientations. The digitized captured gestures were then sent to our proposed translation interface …

Automated Robotic Light Bulb Testing Platform, Agha I. Akram, Muhammad Ali Ummy

Publications and Research

The main purpose of this project is to create a functional prototype of a multilayered system that incorporates aspects of electrical, mechanical, and computer engineering technology. The main objective of the system is to be able to determine whether a light bulb is working or not. The building blocks of this system are a robotic arm that is able to slide along a rail (for added mobility), a conveyor belt, and an electromechanical device that holds and tests light bulbs. Initially, the robot arm picks up a light bulb and places it into the holder which then tests it. A …

3d Bionic Arm, Anny Baez Silfa

Publications and Research

Previous work had been done on what was an adaptation of a robotic arm for Roboqueen, which is a persistent research project of the Department of Computer Engineering Technology. This robotic arm consisted of removing the cardboard hands from the Roboqueen and being replaced by 3D printed fingers and wrists to add functionality that did not exist before. Servo motors connected to Arduinos hidden in the forearm will be used to move the fingers and pick up and hold objects in the hand. Currently, the Finger Myoware is an update of the robotic arm in order to understand how prosthetic …

Child Detection System For Preventing Hot-Car Death, Touheda Khanom, Fahmeda Khanom

Publications and Research

According to the Safety Organization Kids and Cars, an average of 38 children die each year from hot cars due to lack of attention from parents. Existing alert system uses sensors that detect child presence and care less about detecting temperature inside the car. In order to save children from heatstroke, our research focuses on providing information about the temperature inside the car using very effective sensors with high precision. In our research, we have tested different sensors and figured out three sensors that can provide precise information about the presence of a child without an adult. Our child detection …

3d Printed Smart Mobile, Bingfang Chen

Publications and Research

The goal of this research project is to design and build a prototype of a smart mobile robot to participate and compete in IEEE Micro-mouse and similar competitions. The robot has to find its way out of a maze as quickly as possible, by exploring and learning the paths in the maze. 3D printing technology will be used to build a lightweight robot frame so that it can move at a fast speed.

Autonomous Watercraft Simulation And Programming, Nicholas J. Savino

Student Scholar Showcase

Automation of various modes of transportation is thought to make travel more safe and efficient. Over the past several decades, advances to semi-autonomous and autonomous vehicles have led to advanced autopilot systems on planes and boats, and an increasing popularity of self-driving cars. We predicted the motion of an autonomous vehicle using simulations in Python. The simulation models the motion of a small scale watercraft, which can then be built and programmed using an Arduino Microcontroller. We examined different control methods for a simulated rescue craft to reach a target. We also examined the effects of different factors, such as …

Project Janus, Theodore J. Lilyeblade, Jacqueline Worley, Garrison Bybee

Undergraduate Research Symposium - Prescott

The development goal of Project Janus is to design, fabricate, and program two robotic heads that can serve as animatronic chatbots. Each robotic head will be equipped with two USB webcams, a mono speaker within the robot’s mouth, and a pair of microphones. Additionally, each robotic head will feature a three degree of freedom neck, a one degree-of-freedom jaw, and a two degree-of-freedom gimbal for the eyes upon which the cameras will be mounted. The robotic heads will be interfaced to separate internet connected personal computers. Through these computers, they will make use of online speech recognition tools, online chatbots, …

Autonomous Uav Navigation In An Indoor Environment For Warehouse Inventory Recording, Venkat Ramana Reddy Garlapati

UNO Student Research and Creative Activity Fair

UAV’s are currently used extensively in outdoor environments for various applications, including wildfire monitoring, and agricultural surveying, their use in indoor applications have been fairly restricted, owing mainly to the difficulty to maneuver them in smaller indoor spaces and the inability to use GPS-based navigation system. Nevertheless, there are many indoor applications where UAVs could provide a safe, reliable and resilient means to perform operations that are dangerous for humans such as surveillance inside chemical plants, inventory scanning in cold storages etc., Autonomous UAV navigation in an indoor environment can be achieved by finding a collision-free flight path to pass …