Robotics Commons^™

Autonomous Mapping Rover, Garrett Jones, Timothy Kyle Chu, Eugenio Caruso Pasos

Electrical Engineering

This report details the design, implementation, and evaluation of "Rovero," an autonomous mapping rover developed as a senior project. Rovero integrates state-of-the-art technologies, including ROS2 for communication, SLAM algorithms for mapping, and sensor fusion for accurate navigation. The project aimed to achieve robust autonomous operation in indoor environments, leveraging a combination of LiDAR, IMU, and encoder data for real-time decision-making. Key challenges addressed include path planning, obstacle avoidance, and integration of multiple sensor inputs. Results demonstrate successful mapping capabilities and efficient navigation performance.

Autonomous Apple Harvester Robot, Jack Ryan Cline, Tyus Green, Devon Woolston

Electrical Engineering

As agricultural demands rise and manual labor costs increase, there has become a dire need to automate apple harvesting. However, the precision and speed necessary for cost-efficient apple harvesting pose a significant challenge for robotic automation. To maintain cost-effective production, a harvester must be able to operate fast enough and long enough to compete with human labor. It must also be able to navigate and traverse apple orchards autonomously and pick apples without damaging the fruit or tree. This project presents an apple harvesting robot that uses a Mask R-CNN vision system with an RGB-D camera to detect the location …

Control Of Fully-Actuated Aerial Manipulators And Omni-Directional Multirotors, Riley M. Mccarthy

Mechanical Engineering ETDs

This thesis details the system modeling, design, control, simulation, construction, and
testing of both a fully-actuated and omni-directional multirotor aerial system created
for the primary purpose of performing active tasks with their environment. This work
verifies the capabilities of both systems through empirical testing, and demonstrates
how through the use of new control methods and physical designs multirotors can
expand their purpose from passive inspection based tasks to active contact based
tasks. These systems take advantage of newly implemented control allocation features present in the PX4 flight control software, version 1.14. The use of which makes designing controllers for such …

Implementation Of Adas And Autonomy On Unlv Campus, Zillur Rahman

UNLV Theses, Dissertations, Professional Papers, and Capstones

The integration of Advanced Driving Assistance Systems (ADAS) and autonomous driving functionalities into contemporary vehicles has notably surged, driven by the remarkable progress in artificial intelligence (AI). These AI systems, capable of learning from real-world data, now exhibit the capability to perceive their surroundings via a suite of sensors, create optimal routes from source to destination, and execute vehicle control akin to a human driver.

Within the context of this thesis, we undertake a comprehensive exploration of three distinct yet interrelated ADAS and Autonomy projects. Our central objective is the implementation of autonomous driving(AD) technology at UNLV campus, culminating in …

Implementation Of Static Rfid Landmarks In Slam For Planogram Compliance, Brennan L. Drake

Honors College Theses

Autonomous robotic systems are becoming increasingly prevalent in everyday life and exhibit robust solutions in a wide range of applications. They face many obstacles with the foremost of which being SLAM, or Simultaneous Localization and Mapping, that encompasses both creation of the map of an unknown environment and localization of the robot in said environment. In this experiment, researchers propose the use of RFID tags in a semi-dynamic commercial environment to provide concrete landmarks for localization and mapping in pursuit of increased locational certainty. With this obtained, the ultimate goal of the research is to construct a robotics platform for …

Development And Implementation Of Robot Operating Systems For Undergraduates, Chelsey Spitzner

Dissertations, Master's Theses and Master's Reports

The purpose of this project was to create an undergraduate junior lab to teach students about Robotic Operating System (ROS). The labs were designed to highlight the usefulness of ROS and the process used. Designing algorithms, how to send/receive messages, and the hierarchy of how nodes work with each other are emphasized. Taking packages that are open-source then modifying them is also emphasized. This is done so that students can transfer their knowledge from this course to other robot operating systems.

Bibliometric Analysis On Dynamic Target Tracking By Mobile Robot, Gaurav Atha Mr., Siddhant Chaturvedi Mr., Atishraj Desai Mr., Dhrumil Desai Mr., Shripad V. Deshpande Mr.

Library Philosophy and Practice (e-journal)

The survey and bibliometric research on dynamic target tracking by a mobile robot are discussed in this paper. The primary goal of this bibliometric analysis is to comprehend and analyze the scope of the literature in the field of mobile robots for obstacle avoidance, path planning and target tracking using Robot Operating System (ROS). The ROS contains various tools for data analysis, incorporates multiple robots and their sensors, and supports devices interaction for target seeking and localization in mobile robots. This detailed review was performed on various research publications about the mapping of the unknown field/environment by the ROS based …

Path Planning With Deep Neural Networks, Paul Simmerling, Brendan Sayers, Paulo Alcantara Silva

Honors Scholar Theses

This report will cover the work and plans of the ECE 2107 Senior design team. The goal of the project is to design and build a fully autonomous self-driving car. This car will have a complete sensor suite including LIDAR, an IMU, a camera, and encoders. It will be based on a multi-level system where the highest level uses a neural network for advanced signal processing and analysis. The current state of the project is discussed as well as the final results. Project management and other constraints will be briefly investigated. This team is building a self driving car testbed …

Flexible Fault Tolerance For The Robot Operating System, Sukhman S. Marok

Master's Theses

The introduction of autonomous vehicles has the potential to reduce the number of accidents and save countless lives. These benefits can only be realized if autonomous vehicles can prove to be safer than human drivers. There is a large amount of active research around developing robust algorithms for all parts of the autonomous vehicle stack including sensing, localization, mapping, perception, prediction, planning, and control. Additionally, some of these research projects have involved the use of the Robot Operating System (ROS). However, another key aspect of realizing an autonomous vehicle is a fault-tolerant design that can ensure the safe operation of …

Mobile Robot Platform, Sukhman S. Marok

Electrical Engineering

The Mobile Robot Platform is a research and development tool designed for researchers working in the field of robotics. The cost of existing mobile robot platforms can easily be in the thousands of dollars, leading many researchers to choose between spending the time to create their own platform or buying an expensive pre-existing solution. The Mobile Robot Platform proposed combines pre-existing open source software and hardware solutions, along with a strong mechanical base that is capable of navigating on flat surfaces. The robot is designed to have many of the necessary components needed for teleoperation as well as autonomous navigation. …

Applications Of Robot Operating System (Ros) To Mobile Microgrid Formation Outdoors, John Naglak

Dissertations, Master's Theses and Master's Reports

Application of mobile robots to microgrid formation has value for disaster response and service of forward operating bases. This thesis describes the development, testing and demonstration of broad effort across multiple disciplines to enable outdoor positioning and connection of mobile microgrids for the first time. This work includes an outdoor waypoint controller for a UGV agent, specifically the Clearpath Husky. It details sensor fusion of 2D LiDAR and stereo vision, and fusion of odometry sources using an Extended Kalman Filter. Development of these software tools entails integration of many of the packages available through the Robot Operating System (ROS), with …

Rate Based Impact Analysis, Nishant Sharma

School of Computing: Dissertations, Theses, and Student Research

Impact Analysis (IA) identifies control and data dependencies to determine the system components that could be affected by a change. Changes to robotic systems as they are updated often alter the flow of control and sensor data. Changes to the rates at which data is published from sensors, controllers, and other parts of the system are particularly subtle and difficult to detect. These rate changes, even if minor (e.g. lowering the frame rate of a camera), can propagate throughout the system and have broad impacts. However, for robotic systems, these changes in flow rate cannot be precisely tracked by just …

A Robotics Framework For Simulation And Control Of A Robotic Arm For Use In Higher Education, Craig Christensen

MS in Computer Science Project Reports

Robotic arms have been in common use for a several decades now in many areas from manufacturing and industrial uses to hobby projects and amusement park rides. However, there have been very few attempts to make an inexpensive robot arm with a software stack for use in higher education. This paper will outline a control and interfacing software stack built on the Robot Operating System (ROS) and a simulation of the 5 degree of freedom (DoF) robotic arm.

Invariant Inferring And Monitoring In Robotic Systems, Hengle Jiang

School of Computing: Dissertations, Theses, and Student Research

System monitoring can help to detect abnormalities and avoid failures. Crafting monitors for today’s robotic systems, however, can be very difficult due to the systems’ inherent complexity and its rich operating environment.

In this work we address this challenge through an approach that automatically infers system invariants and synthesizes those invariants into monitors. This approach is inspired by existing software engineering approaches for automated invariant inference, and it is novel in that it derives invariants by observing the messages passed between system nodes and the invariants types are tailored to match the spatial, time, temporal, and architectural attributes of robotic …