Robotics Commons^™

Data-Driven Predictive Modeling To Enhance Search Efficiency Of Glowworm-Inspired Robotic Swarms In Multiple Emission Source Localization Tasks, Payal Nandi

Mechanical & Aerospace Engineering Theses & Dissertations

In time-sensitive search and rescue applications, a team of multiple mobile robots broadens the scope of operational capabilities. Scaling multi-robot systems (< 10 agents) to larger robot teams (10 – 100 agents) using centralized coordination schemes becomes computationally intractable during runtime. One solution to this problem is inspired by swarm intelligence principles found in nature, offering the benefits of decentralized control, fault tolerance to individual failures, and self-organizing adaptability. Glowworm swarm optimization (GSO) is unique among swarm-based algorithms as it simultaneously focuses on searching for multiple targets. This thesis presents GPR-GSO—a modification to the GSO algorithm that incorporates Gaussian Process Regression (GPR) based data-driven predictive modeling—to improve the search efficiency of robotic swarms in multiple emission source localization tasks. The problem formulation and methods are presented, followed by numerical simulations to illustrate the working of the algorithm. Results from a comparative analysis show that the GPR-GSO algorithm exceeds the performance of the benchmark GSO algorithm on evaluation metrics of swarm size, search completion time, and travel distance.

Roboretrieve--In A Dual Role As A Hand-Held Surgical Robot And A Collaborative Robot End-Effector To Perform Spillage-Free Specimen Retrieval In Laparoscopy, Siqin Dong

Mechanical & Aerospace Engineering Theses & Dissertations

Recent advances in surgical robotics attempt to overcome limitations of manual surgery by augmenting the surgeon’s capabilities while performing suturing, incision, retraction, and retrieval tasks. This dissertation presents novel approaches for spillage-free specimen retrieval in confined spaces, targeted toward the surgical domain of minimally invasive robotic surgery. The retrieval task involves extraction of a resected specimen, residing in the abdominal cavity, completely outside of the patient’s body. A major challenge in this context is the spillage of content being retrieved, which may cause dissemination of malignancy. To address this challenge, this dissertation develops RoboRetrieve, a portable hand-held robot that …

A Structured Narrative Prompt For Prompting Narratives From Large Language Models: Sentiment Assessment Of Chatgpt-Generated Narratives And Real Tweets, Christopher J. Lynch, Erik J. Jensen, Virginia Zamponi, Kevin O'Brien, Erika Frydenlund, Ross Gore

VMASC Publications

Large language models (LLMs) excel in providing natural language responses that sound authoritative, reflect knowledge of the context area, and can present from a range of varied perspectives. Agent-based models and simulations consist of simulated agents that interact within a simulated environment to explore societal, social, and ethical, among other, problems. Simulated agents generate large volumes of data and discerning useful and relevant content is an onerous task. LLMs can help in communicating agents' perspectives on key life events by providing natural language narratives. However, these narratives should be factual, transparent, and reproducible. Therefore, we present a structured narrative prompt …

Integrating Plcs With Robot Motion Control In Engineering Capstone Courses, Sanjeevi Chitikeshi, Shirshak K. Dhali, Vukica Jovanovic

Engineering Technology Faculty Publications

Robotic motion control methods and Programmable Logic Controllers (PLCs) are critical in engineering automation and process control applications. In most manufacturing and automation processes, robots are used for moving parts and are controlled by industrial PLCs. Proper integration of external I/O devices, sensors and actuating motors with PLC input and output cards is very important to run the process smoothly without any faults and/or safety concerns. Most traditional electrical and computer engineering (ECE) programs offer high level of motion theory and controls but little hands-on exposure to PLCs which are the main industrial controllers. This paper provides a framework for …

Collaborative Robotics Strategies For Handling Non-Repetitive Micro-Drilling Tasks Characterized By Low Structural Mechanical Impedance, Xiangyu Wang

Mechanical & Aerospace Engineering Theses & Dissertations

Mechanical micro-drilling finds widespread use in diverse applications ranging from advanced manufacturing to medical surgery. This dissertation aims to develop techniques that allow programming of robots to perform effective micro-drilling tasks. Accomplishing this goal is faced with several challenges. Micro-drills suffer from frequent breakage caused from variations in drill process parameters. Micro-drilling tasks afford extremely low feed rates and almost zero tolerance for any feed rate variations. The accompanying robot programming task is made difficult as mathematical models that capture the micro-drilling process complexities and sensitive variations in micro-drill parameters are highly difficult to obtain. Therefore, an experimental approach is …

Putin And Putnam: Interpreting Russian Military Activity Through A Three Player, Two-Level Game, Nathan M. Colvin

Modeling, Simulation and Visualization Student Capstone Conference

Is Vladimir Putin a bad strategist, perhaps irrational? Previous military activity by Russia, such as the annexation of Crimea of 2014, yielded limited international gains, at a significant economic and reputational cost. Yet as the 2022 invasion of Ukraine shows, Putin is willing to commit military power, despite the cost of sanctions and other possible retaliation. This three-player simultaneous game, originally created in June, 2021, demonstrates how domestic and international considerations of President Vladimir Putin might lead to otherwise unpredictable Russian military behavior. In this extended version of Robert Putnam’s “two-level game,” President Putin rationally uses the international venue as …

Multi-Modality Breast Mri Segmentation Using Nn-Unet For Preoperative Planning Of Robotic Surgery Navigation, Motaz Alqaoud, John Plemmons Md, Eric Feliberti Md, Facs, Krishnanand Kaipa, Siqin Dong, Gabor Fichtinger, Yimming Xiao, Michel Audette

Modeling, Simulation and Visualization Student Capstone Conference

Segmentation of the chest region and breast tissues is essential for surgery planning and navigation. This paper proposes the foundation for preoperative segmentation based on two cascaded architectures of deep neural networks (DNN) based on the state-of-the-art nnU-Net. Additionally, this study introduces a polyvinyl alcohol cryogel (PVA-C) breast phantom based on the segmentation of the DNN automated approach, enabling the experiments of navigation system for robotic breast surgery. Multi-modality breast MRI datasets of T2W and STIR images were acquired from 10 patients. Segmentation evaluation utilized the Dice Similarity Coefficient (DSC), segmentation accuracy, sensitivity, and specificity. First, a single class labeling …

Real-Time External Labeling For Interactive Visualization In Virtual Environments, Shan Liu, Yuzhong Shen

Modeling, Simulation and Visualization Student Capstone Conference

A real-time external labeling algorithm has been developed to explore the potential for applying annotation and visualization to virtual reality environments, which manages label placement in the projections of virtual 3D models on the view plane. The approach intends to place labels with visual constraints, such as no overlapping, intersections, and occlusions, close proximity to the model parts, by adjusting external annotations' positions concerning available space in the view plane. This algorithm is based on the projected model's contour and adapts to camera viewpoint changes within interactive frame rates. It solves the visibility problem of annotations and operates in real-time …

Can We Make Our Robot Play Soccer? Influence Of Collaborating With Preservice Teachers And Fifth Graders On Undergraduate Engineering Students' Learning During A Robotic Design Process (Work In Progress), Krishnanand Kaipa, Jennifer Kidd, Julia Noginova, Francisco Cima, Stacie Ringleb, Orlando Ayala, Pilar Pazos, Kristie Gutierrez, Min Jung Lee

Mechanical & Aerospace Engineering Faculty Publications

This work-in-progress paper describes engineering students’ experiences in an NSF-funded project that partnered undergraduate engineering students with pre-service teachers to plan and deliver robotics lessons to fifth graders at a local school. This project aims to address an apparent gap between what is taught in academia and industry’s expectations of engineers to integrate perspectives from outside their field to solve modern societal problems requiring a multidisciplinary approach. Working in small teams over Zoom, participating engineering, education, and fifth grade students designed, built, and coded bio-inspired COVID companion robots. The goal for the engineering students was to build new interprofessional skills, …

Human Supremacy As Posthuman Risk, Daniel Estrada

The Journal of Sociotechnical Critique

Human supremacy is the widely held view that human interests ought to be privileged over other interests as a matter of ethics and public policy. Posthumanism is the historical situation characterized by a critical reevaluation of anthropocentrist theory and practice. This paper draws on animal studies, critical posthumanism, and the critique of ideal theory in Charles Mills and Serene Khader to address the appeal to human supremacist rhetoric in AI ethics and policy discussions, particularly in the work of Joanna Bryson. This analysis identifies a specific risk posed by human supremacist policy in a posthuman context, namely the classification of …

Curriculum Development For Robotics Technology Program, Sanjeevi Chitikeshi, Shirshak K. Dhali, Betsey Odell, Vukica Jovanovic, Cheng Y. Lin

Engineering Technology Faculty Publications

With a growing need for a more skilled workforce, providing industry-driven and employment centric training services is an important national priority. Over 3.4 million manufacturing jobs will need to be filled across the United Sates over the next decade. The skills gap is becoming greater based on the statistics provided by the Global Robotics Technology Market: Forecast, 2014-2020 published by Research and Markets, reporting that the worldwide robotics market is forecast to grow from the 2015 level of $26.98B to $82.78B in 2020. This 11 % compounded average growth in the next five years is unprecedented. Given the anticipated growth …

Communication Capability For A Simulation-Based Test And Evaluation Framework For Autonomous Systems, Ntiana Sakioti

Computational Modeling & Simulation Engineering Theses & Dissertations

The design and testing process for collaborative autonomous systems can be extremely complex and time-consuming, so it is advantageous to begin testing early in the design. A Test & Evaluation (T&E) Framework was previously developed to enable the testing of autonomous software at various levels of mixed reality. The Framework assumes a modular approach to autonomous software development, which introduces the possibility that components are not in the same stage of development. The T&E Framework allows testing to begin early in a simulated environment, with the autonomous software methodically migrating from virtual to augmented to physical environments as component development …

A Low-Cost Soft Robotic Hand Exoskeleton For Use In Therapy Of Limited Hand–Motor Function, Grant Rudd, Liam Daly, Vukica Jovanovic, Filip Cukov

Engineering Technology Faculty Publications

We present the design and validation of a low-cost, customizable and 3D-printed anthropomorphic soft robotic hand exoskeleton for rehabilitation of hand injuries using remotely administered physical therapy regimens. The design builds upon previous work done on cable actuated exoskeleton designs by implementing the same kinematic functionality, but with the focus shifted to ease of assembly and cost effectiveness as to allow patients and physicians to manufacture and assemble the hardware necessary to implement treatment. The exoskeleton was constructed solely from 3D-printed and widely available of-the-shelf components. Control of the actuators was realized using an Arduino microcontroller, with a custom-designed shield …

Learning In Informal Environments Through Engineering Activities Through The Partnership With The Girl Scouts, Vukica M. Jovanovic, Otilia Popescu, Carol Considine, Karina Arcaute, Krishnanand Kaipa, Stephanie G. Adams

Engineering Technology Faculty Publications

More affordable and portable robots have enabled easier access for outreach activities to happen in different environments. However, exposure to robotics often relies on seeing robots in action, such as industrial robotics and robots that are used for research purposes. Old Dominion University’s College of Engineering and Technology in Norfolk, Virginia recently signed a partnership agreement with the Girl Scouts of Colonial Coast as one of the focused outreach strategies that target the female population. Various events are held on campus in the Hampton Roads residential area located in the southeastern United States, which has a population of around 2 …

Impact Of Bioinspired Robots On Veterans Pursuing Stem Degrees, Otilia Popescu, Vukica M. Jovanovic, Krishnanand Kaipa, Karina Arcaute, Anthony W. Dean

Engineering Technology Faculty Publications

The gap in the area of advanced manufacturing skilled workforce and the efforts in guiding veterans towards STEM careers are merged in the NSF funded project presented in this paper. While most of the products and STEM educational programs focused on a maker concept that are currently available are specifically designed for young population, at various K-12 grade levels, to increase their interest in STEM and engineering careers in particular, there is a limited availability of such programs to address adult population. The study presented in this paper focuses on developing and implementing a series of workshops for veterans, using …

Confucian Robot Ethics, Qin Zhu, Tom Williams, Ruchen Wen

Computer Ethics - Philosophical Enquiry (CEPE) Proceedings

In the literature of artificial moral agents (AMAs), most work is influenced by either deontological or utilitarian frameworks. It has also been widely acknowledged that these Western “rule-based” ethical theories have encountered both philosophical and computing challenges. To tackle these challenges, this paper explores a non-Western, role-based, Confucian approach to robot ethics. In this paper, we start by providing a short introduction to some theoretical fundamentals of Confucian ethics. Then, we discuss some very preliminary ideas for constructing a Confucian approach to robot ethics. Lastly, we briefly share a couple of empirical studies our research group has recently conducted that …

A Ulysses Pact With Artificial Systems. How To Deliberately Change The Objective Spirit With Cultured Ai, Bruno Gransche

Computer Ethics - Philosophical Enquiry (CEPE) Proceedings

The article introduces a concept of cultured technology, i.e. intelligent systems capable of interacting with humans and showing (or simulating) manners, of following customs and of socio-sensitive considerations. Such technologies might, when deployed on a large scale, influence and change the realm of human customs, traditions, standards of acceptable behavior, etc. This realm is known as the "objective spirit" (Hegel), which usually is thought of as being historically changing but not subject to deliberate human design. The article investigates the question of whether the purposeful design of interactive technologies (as cultured technologies) could enable us to shape modes of …

A Framework For Test & Evaluation Of Autonomous Systems Along The Virtuality-Reality Spectrum, Nathan D. Gonda

Computational Modeling & Simulation Engineering Theses & Dissertations

Test & Evaluation of autonomous vehicles presents a challenge as the vehicles may have emergent behavior and it is frequently difficult to ascertain the reason for software decisions. Current Test & Evaluation approaches for autonomous systems place the vehicles in various operating scenarios to observe their behavior. However, this introduces dependencies between design and development lifecycle of the autonomous software and physical vehicle hardware. Simulation-based testing can alleviate the necessity to have physical hardware; however, it can be costly when transitioning the autonomous software to and from a simulation testing environment. The objective of this thesis is to develop a …

Effects Of Control Device And Task Complexity On Performance And Task Shedding During A Robotic Arm Task, Shelby K. Long

Psychology Theses & Dissertations

The use of robotic arms across domains is increasing, but the relationship between control features and performance is not fully understood. The goal of this research was to investigate the difference in task performance when using two different control devices at high and low task complexities when participants can shed tasks to automation. In this experiment, 40 undergraduates (24 females) used two control devices, a Leap Motion controller and an Xbox controller, to teleoperate a robotic arm in a high or low complexity peg placement task. Simultaneously, participants were tasked with scanning images for tanks. During the experiment, participants had …

Identification And Optimal Linear Tracking Control Of Odu Autonomous Surface Vehicle, Nadeem Khan

Mechanical & Aerospace Engineering Theses & Dissertations

Autonomous surface vehicles (ASVs) are being used for diverse applications of civilian and military importance such as: military reconnaissance, sea patrol, bathymetry, environmental monitoring, and oceanographic research. Currently, these unmanned tasks can accurately be accomplished by ASVs due to recent advancements in computing, sensing, and actuating systems. For this reason, researchers around the world have been taking interest in ASVs for the last decade. Due to the ever-changing surface of water and stochastic disturbances such as wind and tidal currents that greatly affect the path-following ability of ASVs, identification of an accurate model of inherently nonlinear and stochastic ASV system …

Anthropomorphically Inspired Design Of A Tendon-Driven Robotic Prosthesis For Hand Impairments, Manali Bapurao Bhadugale

Mechanical & Aerospace Engineering Theses & Dissertations

This thesis presents the design of a robotic prosthesis, which mimics the morphology of a human hand. The primary goal of this work is to develop a systematic methodology that allows a custom-build of the prosthesis to match the specific requirements of a person with hand impairments. Two principal research questions are addressed toward this goal: 1) How do we cater to the large variation in the distribution of overall hand-sizes in the human population? 2) How closely do we mimic the complex morphological aspects of a biological hand in order to maximize the anthropomorphism (human-like appearance) of the robotic …

Design And Implementation Of An Artificial Neural Network Controller For Quadrotor Flight In Confined Environment, Ahmed Mekky

Mechanical & Aerospace Engineering Theses & Dissertations

Quadrotors offer practical solutions for many applications, such as emergency rescue, surveillance, military operations, videography and many more. For this reason, they have recently attracted the attention of research and industry. Even though they have been intensively studied, quadrotors still suffer from some challenges that limit their use, such as trajectory measurement, attitude estimation, obstacle avoidance, safety precautions, and land cybersecurity. One major problem is flying in a confined environment, such as closed buildings and tunnels, where the aerodynamics around the quadrotor are affected by close proximity objects, which result in tracking performance deterioration, and sometimes instability. To address this …

Humanoid Robots Supporting Children’S Learning In An Early Childhood Setting, Helen Crompton, Kristen Gregory, Diane Burke

Teaching & Learning Faculty Publications

This qualitative study explored the affordances provided by the integration of the NAO humanoid robot in three preschool classrooms. Using the Head Start Early Learning Outcomes Framework as a lens, the researchers qualitatively analyzed data from focus groups, observations, field notes and student artifacts, using grounded coding to uncover language and communication, physical, cognitive and social–emotional learning experiences for children. The researchers also examined interactions between the robot, children and teachers to identify successes and challenges experienced during the integration. Findings indicate the robot provided opportunities for student development in all learning domains. Students were intellectually curious about the robot; …

Hands-On Learning Environment And Educational Curriculum On Collaborative Robotics, Ana Djuric, Jeremy L. Rickli, Vukica M. Jovanovic, Daniel Foster

Engineering Technology Faculty Publications

The objective of this paper is to describe teaching modules developed at Wayne State University integrate collaborative robots into existing industrial automation curricula. This is in alignment with Oakland Community College and WSU’s desire to create the first industry-relevant learning program for the use of emerging collaborative robotics technology in advanced manufacturing systems. The various learning program components will prepare a career-ready workforce, train industry professionals, and educate academicians on new technologies. Preparing future engineers to work in highly automated production, requires proper education and training in CoBot theory and applications. Engineering and Engineering Technology at Wayne State University offer …

A Simulation-Based Layered Framework Framework For The Development Of Collaborative Autonomous Systems, Ioannis Sakiotis

Computational Modeling & Simulation Engineering Theses & Dissertations

The purpose of this thesis is to introduce a simulation-based software framework that facilitates the development of collaborative autonomous systems. Significant commonalities exist in the design approaches of both collaborative and autonomous systems, mirroring the sense, plan, act paradigm, and mostly adopting layered architectures. Unfortunately, the development of such systems is intricate and requires low-level interfacing which significantly detracts from development time. Frameworks for the development of collaborative and autonomous systems have been developed but are not flexible and center on narrow ranges of applications and platforms. The proposed framework utilizes an expandable layered structure that allows developers to define …

Teaching Robot Kinematics For Engineering Technology Students Using A Created Three-Dimensional Robot And Camera, Cheng Y. Lin, Yuzhong Shen

Engineering Technology Faculty Publications

Teaching robot kinematics is important to engineering technology students in the robot automation. The study can help students not only in the coordinate transformation principles from a joint to its following joint in a robot, but also in relating the coordinate systems between a robot and a machine vision system. While students can utilize math software to compute robot kinematic transformations, they have problems verifying their answers. In this paper, a three dimensional vertically articulated robot is created to help students visualize the location and orientation of the end effector. Students can check their robot kinematic answers based on the …

Using Eye And Head Movements As A Control Mechanism For Tele-Operating A Ground-Based Robot And Its Payload, Kathryn C. Hicks

Computational Modeling & Simulation Engineering Theses & Dissertations

To date, eye and head tracking has been used to indicate users' attention patterns while performing a task or as an aid for disabled persons, to allow hands-free interaction with a computer. The increasing accuracy and the reduced cost of eye- and head-tracking equipment make utilizing this technology feasible for explicit control tasks, especially in cases where there is confluence between the visual task and control.

The goal of this research was to investigate the use of eye-tracking as a more natural interface for the control of a camera-equipped, remotely operated robot in tasks that require the operator to simultaneously …

Preparing Students For The Advanced Manufacturing Environment Through Robotics, Mechatronics, And Automation Training, Ana M. Djuric, Vukica Jovanovic, Tatiana V. Goris

Engineering Technology Faculty Publications

Automation is one of the key areas for modern manufacturing systems. It requires coordination of different machines to support manufacturing operations in a company. Recent studies show that there is a gap in the STEM workforce preparation in regards to highly automated production environments. Industrial robots have become an essential part of these semi-automated and automated manufacturing systems. Their control and programming requires adequate education and training in robotics theory and applications. Various engineering technology departments offer different courses related to the application of robotics. These courses are a great way to inspire students to learn about science, math, engineering, …

A Collaborated Process With A Wireless Autonomous Vehicle At It's Center, Thomas B. Stout, Steve C. Hsiung

Engineering Technology Faculty Publications

Developing partnerships between high schools, community colleges and universities is critical for the successful transitions to a lifelong STEM careers. How do you develop these partnerships? The sharing of a technology platform such as autonomous vehicles can bridge the gap by using a common core group of materials. Collaborations between teachers and faculty indifferent schools that share common interests in teaching control systems and robotics technology can be an excellent start. The university as catalyst in the process by designing the curriculum, system hardware and software then through the common interest deploying them in the high schools and community college. …

Review Of Development Stages In The Conceptual Design Of An Electro Hydrostatic Actuator For Robotics, Velibor Karanović, Mitar Jocanović, Vukica Jovanović

Engineering Technology Faculty Publications

The design of modern robotic devices faces numerous requirements and limitations which are related to optimization and robustness. Consequently, these stringent requirements have caused improvements in many engineering areas and lead to development of new optimization methods which better handle new complex products designed for application in industrial robots. One of the newly developed methods used in industrial robotics is the concept of a self-contained power device, an Electro-Hydrostatic Actuator (EHA). EHA devices were designed with a central idea, to avoid the possible drawbacks which were present in other types of actuators that are currently used in robotic systems. This …