Robotics Commons^™

Approach To Physics Education Using Local Ai With Rag For Open Educational Materials Generation, Dmitriy Beznosko

All Things Open

The new tool that starts to enter all parts of our life is AI – and it enters education as well. There are two standing large concerns with using AI for education – the safety of students’ data and the AI missing specific knowledge about the given class. The approach of using the Retrieval Augmented Generation (RAG) provides the user data to the locally run LLM model (using Ollama framework, a free and open-source tool that allows you to run large language models locally on your system) as a context for the generation of the OER materials. As this AI …

Uncalibrated Visual Servoing For Spatial Under-Constrained Cable-Driven Parallel Robots, Jarrett-Scott K. Jenny, Matt Marshall

Faculty Articles

Cable-driven parallel robots (CDPRs) offer large workspaces with minimal infrastructure, but their control becomes difficult when the platform is under-constrained and sensing is limited. This paper investigates uncalibrated visual servoing (UVS) with a single monocular camera, asking whether simple global static Jacobians (GSJ) can be sufficient and how an adaptive Jacobian estimator behaves. Two platforms are evaluated: a three-cable (3C) platform and a redundant six-cable du-al-plane platform (RC). Motion-capture (MoCap) validation shows that redundancy improves stability and tracking by reducing platform tilt and making image errors correspond more directly to Cartesian motions. Across static and low-speed tracking tasks, GSJ proved …

Low Cost Additive Manufacturing Of Segmented Stator Composite Polymer Permanent Magnet Dc Motors, Ben Goldberg, Jordan Bailey, Connor Hawkins, Colin Haskins, Razvan Voicu

Symposium of Student Scholars

This study presents a novel approach to the design, manufacture, and optimization of segmented stators for composite construction axial flux permanent magnet DC motors. Traditional axial flux stator manufacturing is both challenging and expensive, creating a bottleneck in rapid prototyping and innovation. To overcome these limitations, the stator is divided into individually fabricated segments using advanced composite polymer materials and low-cost additive manufacturing techniques. This segmentation not only drastically reduces production complexity and cost but also allows for customized coil geometries that maximize the surface area for improved heat dissipation.

A key innovation of our design is the integration of …

Three-Dimensional Outdoor Object Detection In Quadrupedal Robots For Surveillance Navigations, Muhammad Hassan Tanveer, Zainab Fatima, Hira Mariam, Tanazzah Rehman, Razvan Cristian Voicu

Faculty Articles

Quadrupedal robots are confronted with the intricate challenge of navigating dynamic environments fraught with diverse and unpredictable scenarios. Effectively identifying and responding to obstacles is paramount for ensuring safe and reliable navigation. This paper introduces a pioneering method for 3D object detection, termed viewpoint feature histograms, which leverages the established paradigm of 2D detection in projection. By translating 2D bounding boxes into 3D object proposals, this approach not only enables the reuse of existing 2D detectors but also significantly increases the performance with less computation required, allowing for real-time detection. Our method is versatile, targeting both bird’s eye view objects …

Effects Of A Wi-Fi Link On The Performance Of A Path Following Autonomous Ground Vehicle, Anthony Iwejuo, Austin Cagle, Billy Kihei, Ph.D.

Symposium of Student Scholars

As vehicles become more automated and connected, the future of safe and efficient travel will be dependent on efficient wireless networks. Artificial intelligence (AI) demands high power resources and computing resources that can be resource-intensive for mobile robotic systems. A new paradigm involving the remote computing of A.I. can enable robotics that are built lighter and more power efficient. In this study, we compare a locally run artificial intelligence algorithm for autonomous ground vehicle navigation against remote computation through various wireless links to highlight the need for low-latency access to remote computing resources over Wi-Fi network calls. Our findings show …

Mosaic Swarm Robotics: Emulating Natural Collective Behaviors For Efficient Task Execution With Custom Mobile Robots, Jonathan Ridley, Arielle Charles, Charles Koduru, Muhammad Hassan Tanveer, Razvan Voicu

Symposium of Student Scholars

Mosaics, as an artistic expression, involves the meticulous arrangement of diverse tiles to form a unified composition. Drawing inspiration from this concept, the field of swarm robotics seeks to emulate nature’s collective behaviors observed in ant colonies, fish schools, and bird flocks, employing multiple agents to accomplish tasks efficiently. Our research explores the concept of mosaic swarm robotics, where numerous nodes with specialized functions are deployed across various domains, including applications for outdoor data capture and environment mapping. We utilized custom mobile robots operated by Raspberry Pi microcontrollers. By establishing an elaborate web of client-to-client communications to enable true localized …

Generalized Model To Enable Zero-Shot Imitation Learning For Versatile Robots, Yongshuai Wu

Master's Theses

The rapid advancement in Deep Learning (DL), especially in Reinforcement Learning (RL) and Imitation Learning (IL), has positioned it as a promising approach for a multitude of autonomous robotic systems. However, the current methodologies are predominantly constrained to singular setups, necessitating substantial data and extensive training periods. Moreover, these methods have exhibited suboptimal performance in tasks requiring long-horizontal maneuvers, such as Radio Frequency Identification (RFID) inventory, where a robot requires thousands of steps to complete.

In this thesis, we address the aforementioned challenges by presenting the Cross-modal Reasoning Model (CMRM), a novel zero-shot Imitation Learning policy, to tackle long-horizontal robotic …

An In-Depth Analysis Of Domain Adaptation In Computer And Robotic Vision, Muhammad Hassan Tanveer, Zainab Fatima, Shehnila Zardari, David A. Guerra-Zubiaga

Faculty Articles

This review article comprehensively delves into the rapidly evolving field of domain adaptation in computer and robotic vision. It offers a detailed technical analysis of the opportunities and challenges associated with this topic. Domain adaptation methods play a pivotal role in facilitating seamless knowledge transfer and enhancing the generalization capabilities of computer and robotic vision systems. Our methodology involves systematic data collection and preparation, followed by the application of diverse assessment metrics to evaluate the efficacy of domain adaptation strategies. This study assesses the effectiveness and versatility of conventional, deep learning-based, and hybrid domain adaptation techniques within the domains of …

Actively Guided Cansats For Assisting Localization And Mapping In Unstructured And Unknown Environments, Cary Chun, M. Hassan Tanveer

Symposium of Student Scholars

When navigating in unknown and unstructured environments, Unmanned Arial Vehicles (UAVs) can struggle when attempting to preform Simultaneous Localization and Mapping (SLAM) operations. Particularly challenging circumstance arise when an UAV may need to land or otherwise navigate through treacherous environments. As the primary UAV may be too large and unwieldly to safely investigate in these types of situations, this research effort proposes the use of actively guided CanSats for assisting in localization and mapping of unstructured environments. A complex UAV could carry multiple of these SLAM capable CanSats, and when additional mapping and localization capabilities where required, the CanSat would …

Unmanned Aerial System Design For Civil Engineering Operations – A Vip Study, Ezra Robles, Harrison Vicknair, Derek Price, Logan Westra, George Pitcock, Joshua Diamond, Bhuvan Saraswat, Jeremiah Prayor, Fon Saliki

Symposium of Student Scholars

Unmanned Aerial System Design for Civil Engineering Operations – A Case Study

The objective of the project is to design and build a modular Unmanned Aerial System (UAS) that meets the specifications set forth by United Consulting – a local civil engineering company. These specifications are achieved through three unique missions. In each mission, data is collected using different methods. These missions include land surveying, bridge structure inspection and manhole probing. The key requirements of the drone are to maintain a minimum flight time of 30 minutes and the ability to receive and transmit telemetry, photographic and video data from …

Development Of A Compliant Gripper Driven By 3 Dof Soft Robot, Derek M. Price Ii, Ricardo Ramirez, Pt Angel Tran

Symposium of Student Scholars

Industrial robots are moving toward automation, which makes it increasingly necessary to replace the functions traditionally performed by humans with robotics. Pick and place operation is a prime example of such automation. Robots that pick up and place objects mimic the human action of picking an object up and placing it in a targeted location. It has led to the development of robotic end-effectors that have a human-like feel. Grippers can be articulated in various ways depending on their application area and well-defined desired tasks. As compliant and soft links deflect more under the same load than their rigid body …

Cooperative Localization Between Robots Using Vision And Path Planning Algorithm, Charles Koduru

Symposium of Student Scholars

The aim of this article is to provide an obstacle avoidance solution for navigating a robot from one point to another. The robots that are being considered are the NAOHumanoid robot and the wheeled robot Rosbot 2.0. This article's main purpose is to understand how robots work together to minimize positioning errors. The image processing robot (NAO) will be able to instruct the wheeled bot (Rosbot) to navigate around obstacles more accurately by incorporating Inverse Perspective Mapping methods (IPM) and the A-Star Algorithm. This approach demonstrates the ability to improve robot collaboration in order to diagnose various collisions and develop …

Project Blipper, Peter Jacobs, Preston Delaware, Ryan Foster

Senior Design Project For Engineers

This project was sponsored by Clorox to design and create an automatic bottle-unscrambling system for possible implementation at their bottling plant in Chile. The objective was to use a robotic arm to unscramble bottles from an incoming conveyor belt and place them upright on an outbound conveyor belt. Throughout the research, design, and testing of solutions for this project, several design alternatives were found for each discipline, and will be presented to Clorox so that they can make an informed decision for how and if they want to move forward with implementation of this project.

The project was split into …

Artificial Intelligence Towards Future Industrial Opportunities And Challenges, Gizealew Dagnaw

African Conference on Information Systems and Technology

The industry 4.0 will bring reflective changes to our society, including an important digital shift in the manufacturing sector. At present, several manufacturing firms are trying to adopt the practices of industry 4.0 throughout their supply chain. The Fourth Industrial Revolution and the artificial intelligence at its core are fundamentally changing the way we live, work and interact as citizens. The complexity of this transformation may look overwhelming and to many threatening. Recently, the dramatic growth of new generation information technologies has prompted several countries to seek new strategies for industrial revolution. The globalization and the competitiveness are forcing companies …

Efficient Data Mining Algorithm Network Intrusion Detection System For Masked Feature Intrusions, Kassahun Admkie, Kassahun Admkie Tekle

African Conference on Information Systems and Technology

Most researches have been conducted to develop models, algorithms and systems to detect intrusions. However, they are not plausible as intruders began to attack systems by masking their features. While researches continued to various techniques to overcome these challenges, little attention was given to use data mining techniques, for development of intrusion detection. Recently there has been much interest in applying data mining to computer network intrusion detection, specifically as intruders began to cheat by masking some detection features to attack systems. This work is an attempt to propose a model that works based on semi-supervised collective classification algorithm. For …

American Sign Language Recognition Using Machine Learning And Computer Vision, Kshitij Bantupalli, Ying Xie

Master of Science in Computer Science Theses

Speech impairment is a disability which affects an individual’s ability to communicate using speech and hearing. People who are affected by this use other media of communication such as sign language. Although sign language is ubiquitous in recent times, there remains a challenge for non-sign language speakers to communicate with sign language speakers or signers. With recent advances in deep learning and computer vision there has been promising progress in the fields of motion and gesture recognition using deep learning and computer vision-based techniques. The focus of this work is to create a vision-based application which offers sign language translation …

News - Screven-Jenkins Regional Library, Sharon Blank

Georgia Library Quarterly

No abstract provided.