Robotics Commons^™

Autonomous Watercraft Simulation And Programming, Nicholas J. Savino

Student Scholar Showcase

Automation of various modes of transportation is thought to make travel more safe and efficient. Over the past several decades, advances to semi-autonomous and autonomous vehicles have led to advanced autopilot systems on planes and boats, and an increasing popularity of self-driving cars. We predicted the motion of an autonomous vehicle using simulations in Python. The simulation models the motion of a small scale watercraft, which can then be built and programmed using an Arduino Microcontroller. We examined different control methods for a simulated rescue craft to reach a target. We also examined the effects of different factors, such as …

Consensus-Based Robotic Formation Control, Satish Reddy Modugu

Computer Science Graduate Research Workshop

No abstract provided.

Integrating Mathematics And Educational Robotics: Simple Motion Planning, Ronald I. Greenberg, George K. Thiruvathukal, Sara T. Greenberg

Computer Science: Faculty Publications and Other Works

This paper shows how students can be guided to integrate elementary mathematical analyses with motion planning for typical educational robots. Rather than using calculus as in comprehensive works on motion planning, we show students can achieve interesting results using just simple linear regression tools and trigonometric analyses. Experiments with one robotics platform show that use of these tools can lead to passable navigation through dead reckoning even if students have limited experience with use of sensors, programming, and mathematics.

Exoskeleton, Vinu Casper, Liliana Fitzpatrick

Engineering and Technology Management Student Projects

This is a research about the marketing plan for exoskeleton wearable devices. The objective is to provide a meaningful Customer Value Proposition to the prospective customers.The Samsung company SWOT analysis is the basis for a marketing strategy. The exoskeleton features and market definition is included in the analysis. A competitor analysis of homogeneus exoskeletons providers is included to review the current market. An exhaustive customer analysis was performed to identify the customer needs as the input for the marketing plan development. The potential market was identified to learn about the exoskeleton market share opportunity. The exoskeleton global market is analyzed …

Effects Of Control Device And Task Complexity On Performance And Task Shedding During A Robotic Arm Task, Shelby K. Long

Psychology Theses & Dissertations

The use of robotic arms across domains is increasing, but the relationship between control features and performance is not fully understood. The goal of this research was to investigate the difference in task performance when using two different control devices at high and low task complexities when participants can shed tasks to automation. In this experiment, 40 undergraduates (24 females) used two control devices, a Leap Motion controller and an Xbox controller, to teleoperate a robotic arm in a high or low complexity peg placement task. Simultaneously, participants were tasked with scanning images for tanks. During the experiment, participants had …

A Framework For Test & Evaluation Of Autonomous Systems Along The Virtuality-Reality Spectrum, Nathan D. Gonda

Computational Modeling & Simulation Engineering Theses & Dissertations

Test & Evaluation of autonomous vehicles presents a challenge as the vehicles may have emergent behavior and it is frequently difficult to ascertain the reason for software decisions. Current Test & Evaluation approaches for autonomous systems place the vehicles in various operating scenarios to observe their behavior. However, this introduces dependencies between design and development lifecycle of the autonomous software and physical vehicle hardware. Simulation-based testing can alleviate the necessity to have physical hardware; however, it can be costly when transitioning the autonomous software to and from a simulation testing environment. The objective of this thesis is to develop a …

Robotic Motion Generation By Using Spatial-Temporal Patterns From Human Demonstrations, Yongqiang Huang

USF Tampa Graduate Theses and Dissertations

Robots excel in manufacturing facilities because the tasks are repetitive and do not change. However, when the tasks change, which happens in almost all tasks that humans perform daily, such as cutting, pouring, and grasping, etc., robots perform much worse. We aim at teaching robots to perform tasks that are subject to change using demonstrations collected from humans, a problem referred to as learning from demonstration (LfD).

LfD consists of two parts: the data of human demonstrations, and the algorithm that extracts knowledge from the data to perform the same motions. Similarly, this thesis is divided into two parts. The …

Force Feedback And Intelligent Workspace Selection For Legged Locomotion Over Uneven Terrain, John Rippetoe

USF Tampa Graduate Theses and Dissertations

Legged robots present an incredible opportunity for humanity to conduct dangerous operations such as search and rescue, disaster recovery, and planetary exploration without ever placing themselves in harms way. The ability of a leg to more freely dictate its shape, orientation, and length gives it tremendous mobility and adaptability demanded of a system intended for operation outside of a controlled environment. However, one only need look at the average cat, dog, or friendly neighborhood squirrel to understand the immense gap that exists between what is possible of legged systems and their current set of capabilities.

Areas of study relevant to …

End To End Satellite Servicing And Space Debris Management, Aman Chandra, Himangshu Kalita, Roberto Furfaro, Jekan Thanga

Space Traffic Management Conference

There is growing demand for satellite swarms and constellations for global positioning, remote sensing and relay communication in higher LEO orbits. This will result in many obsolete, damaged and abandoned satellites that will remain on-orbit beyond 25 years. These abandoned satellites and space debris maybe economically valuable orbital real-estate and resources that can be reused, repaired or upgraded for future use. Space traffic management is critical to repair damaged satellites, divert satellites into warehouse orbits and effectively deorbit satellites and space debris that are beyond repair and salvage. Current methods for on-orbit capture, servicing and repair require a large service …

Advanced Inflatable De-Orbit Solutions For Derelict Satellites And Orbital Debris, Aman Chandra, Greg Wilburn, Jekan Thanga

Space Traffic Management Conference

The exponential rise in small-satellites and CubeSats in Low Earth Orbit (LEO) poses important challenges for future space traffic management. At altitudes of 600 km and lower, aerodynamic drag accelerates de-orbiting of satellites. However, placement of satellites at higher altitudes required for constellations pose important challenges. The satellites will require on-board propulsion to lower their orbits to 600 km and let aerodynamic drag take-over. In this work we analyze solutions for de-orbiting satellites at altitudes of up to 3000 km. We consider a modular robotic de-orbit device that has stowed volume of a regular CubeSat. The de-orbit device would be …

American Sign Language Recognition Using Machine Learning And Computer Vision, Kshitij Bantupalli, Ying Xie

Master of Science in Computer Science Theses

Speech impairment is a disability which affects an individual’s ability to communicate using speech and hearing. People who are affected by this use other media of communication such as sign language. Although sign language is ubiquitous in recent times, there remains a challenge for non-sign language speakers to communicate with sign language speakers or signers. With recent advances in deep learning and computer vision there has been promising progress in the fields of motion and gesture recognition using deep learning and computer vision-based techniques. The focus of this work is to create a vision-based application which offers sign language translation …

State Feedback Of Complex Systems Using Fuzzy Cognitive Maps, Vassiliki Mpelogianni, Ioannis Arvanitakis, Peter P. Groumpos

International Journal of Business and Technology

Complex systems have become a research area with increasing interest over the last years. The emergence of new technologies, the increase in computational power with reduced resources and cost, the integration of the physical world with computer based systems has created the possibility of significantly improving the quality of life of humans. While a significant degree of automation within these systems exists and has been provided in the past decade with examples of the smart homes and energy efficient buildings, a paradigm shift towards autonomy has been noted. The need for autonomy requires the extraction of a model; while a …

A Deep Recurrent Q Network Towards Self-Adapting Distributed Microservices Architecture (In Press), Basel Magableh

Articles

One desired aspect of microservices architecture is the ability to self-adapt its own architecture and behaviour in response to changes in the operational environment. To achieve the desired high levels of self-adaptability, this research implements the distributed microservices architectures model, as informed by the MAPE-K model. The proposed architecture employs a multi adaptation agents supported by a centralised controller, that can observe the environment and execute a suitable adaptation action. The adaptation planning is managed by a deep recurrent Q-network (DRQN). It is argued that such integration between DRQN and MDP agents in a MAPE-K model offers distributed microservice architecture …

3d Formation Control In Multi-Robot Teams Using Artificial Potential Fields, Sanjana Reddy Mohan

Electronic Theses and Dissertations

Multi-robot teams find applications in emergency response, search and rescue operations, convoy support and many more. Teams of autonomous aerial vehicles can also be used to protect a cargo of airplanes by surrounding them in some geometric shape. This research develops a control algorithm to attract UAVs to one or a set of bounded geometric shapes while avoiding collisions, re-configuring in the event of departure or addition of UAVs and maneuvering in mission space while retaining the configuration. Using potential field theory, weighted vector fields are described to attract UAVs to a desired formation. In order to achieve this, three …

Robotic Automation Of A Cnc Machine, Jace Hovey

Honors Undergraduate Theses

Robotic automation of CNC machines is becoming more popular as robot technology advances and becomes more readily available. While some CNC machines can run autonomously with part catchers, vertical milling centers require an external entity to keep the machine running. Collaborative and Industrial robots are the two main selections for automating a vertical CNC milling machine. We investigate specifically which robot type is most effective for machine tending a Haas VF2 vertical milling center. To do this a cell floor plan, risk assessment, overall equipment effectiveness evaluation, and a total cost analysis are performed to compare robots. With this results …

The Adoption Of Collaborative Robots Toward Ubiquitous Diffusion: A Research Agenda, Yuhua (Jake) Liang, Seungcheol Austin Lee

Communication Faculty Articles and Research

This paper proposes a framework to study the adoption of collaborative robots (co-robots or cobots) as an innovation and their diffusion into the larger population. Collaborative robots are only starting to appear in our society, yet challenges such as fear and distrust may impede their further adoption. This paper discusses the foundational work necessary to understand collaborative robot adoption and the core elements to achieve ubiquitous diffusion, with a focus on human users and the communication processes.

Should Robots Prosecute And Defend?, Stephen E. Henderson

Faculty Articles

Even when we achieve the ‘holy grail’ of artificial intelligence—machine intelligence that is at least as smart as a human being in every area of thought—there may be classes of decisions for which it is intrinsically important to retain a human in the loop. On the common account of American criminal adjudication, the role of prosecutor seems to include such decisions given the largely unreviewable declination authority, whereas the role of defense counsel would seem fully susceptible of automation. And even for the prosecutor, the benefits of automation might outweigh the intrinsic decision-making loss, given that the ultimate decision—by judge …

The Social Presence Of Jibo, Parisa Farhadi

Graduate Research Theses & Dissertations

This research is an attempt to investigate how a social robot is perceived by users at the first encounter. And to find out whether a social robot like Jibo is understood merely as a kind of a technological object or a social entity. Previous studies in Human-Robot Interaction have considered social presence as a mediator in users’ social responses toward robots; however, the focus of this study is the social presence itself and investigates whether Jibo produces a sense of presence during initial encounters. To this end, the current study examines individuals’ perceptions of and responses to Jibo. Participants (N=8) …

Evaluation Of Suas Education And Training Tools, Brent Terwilliger, Scott Burgess, James Solti, Kristine Kiernan, Christian Janke, Andrew Shepherd

Publications

The wide distribution and demographic composition of students seeking small unmanned aircraft system (sUAS) education presents a need to fully understand the capabilities, limitations, and dependencies of effective training tools. Concepts, practices, and technologies associated with modeling and simulation, immersive gaming, augmented and mixed-reality, and remote operation have demonstrated efficacy to support engaged student learning and objective satisfaction. Identification and comparison of key attributes critical to an aviation educational framework, such as competency-based training, enables educational designers to identify those tools with the highest potential to support successful learning. A series of factors, such as system performance, regulatory compliance, environmental …

Programming Of Collaborative Robot (Cobot) To Selectively Disassemble Products To Obtain Critical Materials, Brittany Felder

Research Opportunities for Engineering Undergraduates (ROEU) Program 2018-19

End-of-life products that contain critical materials, such as rare earth magnets, are often discarded even though there is remaining value that can be fed back into a remanufacturing process. This research aims to develop high throughput and economic value recovery from electric machines using collaborative robotics.

Improvement Of The Material’S Mechanical Characteristics Using Intelligent Real Time Control Interfaces In Hfc Hardening Process, Florentin Smarandache, Luige Vladareanu, Mihaiela Iliescu, Victor Vladareanu, Alexandru Gal, Octavian Melinte, Adrian Margean

Branch Mathematics and Statistics Faculty and Staff Publications

The paper presents Intelligent Control (IC) Interfaces for real time control of mechatronic systems applied to Hardening Process Control (HPC) in order to improvement of the material’s mechanical characteristics. Implementation of IC laws in the intelligent real time control interfaces depends on the particular circumstances of the models characteristics used and the exact definition of optimization problem. The results led to the development of the IC interfaces in real time through Particle Swarm Optimization (PSO) and neural networks (NN) using off- line the regression methods.

News - Screven-Jenkins Regional Library, Sharon Blank

Georgia Library Quarterly

No abstract provided.

Estimation Of Multi-Directional Ankle Impedance As A Function Of Lower Extremity Muscle Activation, Lauren Knop

Dissertations, Master's Theses and Master's Reports

The purpose of this research is to investigate the relationship between the mechanical impedance of the human ankle and the corresponding lower extremity muscle activity. Three experimental studies were performed to measure the ankle impedance about multiple degrees of freedom (DOF), while the ankle was subjected to different loading conditions and different levels of muscle activity. The first study determined the non-loaded ankle impedance in the sagittal, frontal, and transverse anatomical planes while the ankle was suspended above the ground. The subjects actively co-contracted their agonist and antagonistic muscles to various levels, measured using electromyography (EMG). An Artificial Neural Network …

Analysis And Control Of Fiber-Reinforced Elastomeric Enclosures (Frees), Soheil Habibian

Master’s Theses

While rigid robots are extensively used in various applications, they are limited in the tasks they can perform and can be unsafe in close human-robot interactions. Soft robots on the other hand surpass the capabilities of rigid robots in several ways, such as compatibility with the work environments, degrees of freedom, manufacturing costs, and safe interactions with the environment. This thesis studies the behavior of Fiber-Reinforced Elastomeric Enclosures (FREEs) as a particular type of soft pneumatic actuator that can be used in soft manipulators. A dynamic lumped-parameter model is created to simulate the motion of a single FREE under various …

Estimation And Prediction Of The Human Gait Dynamics For The Control Of An Ankle-Foot Prosthesis, Guilherme Aramizo Ribeiro

Dissertations, Master's Theses and Master's Reports

With the growing population of amputees, powered prostheses can be a solution to improve the quality of life for many people. Powered ankle-foot prostheses can be made to behave similar to the lost limb via controllers that emulate the mechanical impedance of the human ankle. Therefore, the understanding of human ankle dynamics is of major significance. First, this work reports the modulation of the mechanical impedance via two mechanisms: the co-contraction of the calf muscles and a change of mean ankle torque and angle. Then, the mechanical impedance of the ankle was determined, for the first time, as a multivariable …

Multirobot Confidence And Behavior Modeling: An Evaluation Of Telerobotic Performance And Efficiency, Nathan Lucas

Wayne State University Dissertations

There is considerable interest in multirobot systems capable of performing spatially distributed, hazardous, and complex tasks as a team. There is also growing interest in manned-unmanned teams leveraging the unique abilities of humans and automated machines working alongside each other. The limitations of human perception and cognition affect the ability of operators to integrate information from multiple mobile robots, switch between their spatial frames of reference, and divide attention among many sensory inputs and command outputs. Automation is necessary to help the operator manage increasing demands as the number of robots scales up. However, more automation does not necessarily equate …

Autonomous Combat Robot, Andrew J. Szabo Ii, Chris Heldman, Tristin Weber, Tanya Tebcherani, Holden Leblanc, Fabian Ardeljan

Williams Honors College, Honors Research Projects

This honors project will also serve as an engineering senior design project.

The objective is to design and build the software and electrical systems for a 60 lb weight class combat robot that will function autonomously and outperform manually driven robots during competition.

While running autonomously, the robot will use LiDAR sensors to detect and attack opponent robots. This robot will also be able to be remote controlled in manual mode. This will mitigate the risk in case the autonomy or sensors fail. LED lights on the robot will indicate whether it is in autonomous or manual mode. The system …

Unsupervised Feature Learning For Point Cloud By Contrasting And Clustering With Graph Convolutional Neural Network, Ling Zhang

Dissertations and Theses

Recently, deep graph neural networks (GNNs) have attracted significant attention for point cloud understanding tasks, including classification, segmentation, and detection. However, the training of such deep networks still requires a large amount of annotated data, which is both expensive and time-consuming. To alleviate the cost of collecting and annotating large-scale point cloud datasets, we propose an unsupervised learning approach to learn features from unlabeled point cloud ”3D object” dataset by using part contrasting and object clustering with GNNs. In the contrast learning step, all the samples in the 3D object dataset are cut into two parts and put into a …

Exploring Cyber-Physical Systems, Misbah Uddin Mohammed

Graduate Research Theses & Dissertations

The advances in IOT, Computer Vision, AI and Machine Learning have made these technologies ubiquitous to our daily lives. From Smart Phones to Connected Vehicles, Cyber Physical systems have been interspersed into everything we interact in today’s world. The aim or this thesis was to explore these advances in Cyber Physical Systems and analyze the different sectors they were affecting. We then hand-picked certain domains and explored further by carrying out practical projects using some of the latest software and hardware resources available. Technologies like Amazon Alexa services, NVIDIA Jetson boards, TensorFlow, OpenCV, NodeJS were heavily employed in our various …

Big Five Technologies In Aeronautical Engineering Education: Scoping Review, Ruth Martinez-Lopez

International Journal of Aviation, Aeronautics, and Aerospace

The constant demands that technology creates in aerospace engineering also influence education. The identification of the technologies with practical application in aerospace engineering is of current interest to decision makers in both universities and industry. A social network approach enhances this scoping review of the research literature to identify the main topics using the Big Five technologies in aerospace engineering education. The conceptual structure of the dataset (n=447) was analyzed from different approaches: at macro-level, a comparative of the digital technology identified by cluster analysis with the number of co-words established in 3 and 8 and, a keyword central structure …