Open Access. Powered by Scholars. Published by Universities.®

Transportation Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 871 - 900 of 5932

Full-Text Articles in Transportation Engineering

Stress Analysis And Monitoring Of Composite Cable Hanging Basket During Construction, Zhou Su, Li Xinsheng, Liu Chentao, Shao Mingjie Sep 2023

Stress Analysis And Monitoring Of Composite Cable Hanging Basket During Construction, Zhou Su, Li Xinsheng, Liu Chentao, Shao Mingjie

Journal of China & Foreign Highway

Composite cable hanging baskets are also known as front and rear pivot combined hanging baskets. By taking the construction monitoring of a single-tower and double plane cable-stayed bridge as the research project, this paper demonstrated the rationality, practicability and advancement of the composite cable hanging baskets during construction, and carried out modeling analysis of the whole construction stage. Meanwhile, the batch tension values of the construction sections were determined according to the deformation of the hanging basket during the construction stage, and then the theoretical and measured values of the basket’s deformation and stress during the construction stage were analyzed …

Go to article

Study On Influence Of Overcrossing Construction Of Xingquan Railway Lyugu No .2 Tunnel To Existing Chenba Tunnel Of Fuxia Railway, Fan Dequan Sep 2023

Study On Influence Of Overcrossing Construction Of Xingquan Railway Lyugu No .2 Tunnel To Existing Chenba Tunnel Of Fuxia Railway, Fan Dequan

Journal of China & Foreign Highway

To study the influence of tunnel crossing construction on the existing tunnel structures, this paper took the overcrossing construction of the existing Chenba tunnel of Fuxia railway of Xingquan railway Lyugu No. 2 tunnel as the research project. By adopting the numerical simulation method of finite element, it studied the change rules of the displacement field and stress field of the existing tunnels affected by the overcrossing construction of the new tunnels. The results show that the influencing range subject to the effect of Lyugu No. 2 tunnel’s excavation on the existing Chenba tunnel is roughly within the range of …

Go to article

Research On Performance Simulation Of Previous Concrete Considering Characteristics Of Void Structures, Zheng Shuai, Dan Jingsong, Han Weiwei, Lv Yigang, He Jie, Pei Fucai Sep 2023

Research On Performance Simulation Of Previous Concrete Considering Characteristics Of Void Structures, Zheng Shuai, Dan Jingsong, Han Weiwei, Lv Yigang, He Jie, Pei Fucai

Journal of China & Foreign Highway

Pervious concrete contains a large number of macroscopic voids. To analyze the influence of the void structures on the mechanical properties of pervious concrete, this paper adopted the random void method to build a simulation model of pervious concrete, and study the effect of the characteristics of the void structures on the force properties. Firstly, two kinds of pervious concrete specimens with two void content levels were made indoor, and then the specimens were cut after curing and molding. Next, image enhancement and threshold segmentation were conducted on the section images of the cut surfaces, and two-dimensional digital images of …

Go to article

Study On Frost Resistance And Pore Structure Of Nano-Sio 2 Modified Pavement Concrete Under Fatigue Load, Zhou Xuexiang, Zheng Wenshi, Wu Cong Sep 2023

Study On Frost Resistance And Pore Structure Of Nano-Sio 2 Modified Pavement Concrete Under Fatigue Load, Zhou Xuexiang, Zheng Wenshi, Wu Cong

Journal of China & Foreign Highway

To improve the frost resistance of concrete pavement under fatigue load, this paper simulated the freeze-thaw damage of concrete pavement under vehicle load by indoor fatigue loading and alternating freeze-thaw cycling test. Meanwhile, it designed the bending tensile test to test the residual bending tensile strength of nano SiO2-modified pavement concrete after freezing and thawing, and adopted the mercury injection method to test the microscopic pore structures of concrete. Additionally, by employing the electron microscope, the change rules of pores in the concrete under the action of fatigue load were observed, and the effect of nano SiO2 dosage, the number …

Go to article

Influence Of Natural Environment On The Serviceability Of Emulsified Asphalt Cold Recycled Mixture, Yang Puxin Sep 2023

Influence Of Natural Environment On The Serviceability Of Emulsified Asphalt Cold Recycled Mixture, Yang Puxin

Journal of China & Foreign Highway

To improve the early serviceability of emulsified asphalt cold recycled mixtures, this paper studied the effect of curing conditions on the mechanical strength and stability of emulsified asphalt cold recycled mixtures by conducting indoor tests. The results show that in the same test conditions, the indoor emulsified asphalt cold recycled mixture can better characterize the serviceability of practical projects. Compared to the indoor specimen mixture, the stability and cleavage strength of field mixture core samples are increased by an average of 5.5% and 10.7% respectively. Under the curing time of no less than 7 d, the stability, cleavage strength and …

Go to article

Experimental Study On Recycled Brick Powder Foam Concrete Based On Slurry Substitution Method, Liao Shixian, Huang Lei Sep 2023

Experimental Study On Recycled Brick Powder Foam Concrete Based On Slurry Substitution Method, Liao Shixian, Huang Lei

Journal of China & Foreign Highway

Foam concrete is a kind of porous lightweight building material characterized by sound insulation and noise reduction, heat insulation and fire resistance, heat preservation and frost resistance. However, it has defects such as low strength, high porosity and poor integrity, thus limiting its wide application in the field of building materials. Recycled brick powder can be prepared from construction waste of clay bricks and has certain volcanic ash activity. Meanwhile, the mechanical properties of foam concrete can be improved by employing waste bricks as an admixture in cement-based composite materials. In view of the problems of the cement substitution method, …

Go to article

Study On Mix Design And Performance Of Permeable Concrete Considering Sand Ratio And Aggregate To Binder Ratio, Wei Yazhou, Ji Rongqing Sep 2023

Study On Mix Design And Performance Of Permeable Concrete Considering Sand Ratio And Aggregate To Binder Ratio, Wei Yazhou, Ji Rongqing

Journal of China & Foreign Highway

Considering the effect of the sand ratio and aggregate to binder ratio, this paper improved the traditional mix ratio design method-volumetric method, and investigated the influence of the sand ratio, aggregate to binder ratio, and maintenance method on the mechanical properties and permeability coefficient of pervious concrete based on the improved method. The results show that under the sand ratio of 15%, the compressive strength of concrete is significantly increased and the permeability is not affected. When the aggregate to binder ratio is 3.0‒3.1, the compressive strength and permeability coefficient of the concrete can be both considered. Additionally, compared to …

Go to article

Experimental Study On Mechanical Properties Of Steel-Polypropylene Mixed Fiber Rubber Concrete, Qiu Jiandong Sep 2023

Experimental Study On Mechanical Properties Of Steel-Polypropylene Mixed Fiber Rubber Concrete, Qiu Jiandong

Journal of China & Foreign Highway

Waste rubber materials can be recycled to obtain rubber aggregates, which can be employed in cement concrete products. This paper carried out mechanical performance tests on ordinary concrete and rubber concrete (rubber substitution rate of 20%) with different fiber combinations (doped MS, co-doped PP, and mixed MS-PP), and mainly examined the slump, density, compressive strength, modulus of elasticity, split tensile strength, and rupture strength of the concrete. The results show that the relevant performance indexes decrease significantly after 20% of rubber aggregate is added to the concrete. However, the mechanical performance of ordinary concrete and rubber concrete with the combination …

Go to article

Application Of Bim Forward Design In Complex Three-Dimensional Traffic Design Stage, Wang Bo, Zhu Xinghu, Pei Wangjian, Ge Puta Sep 2023

Application Of Bim Forward Design In Complex Three-Dimensional Traffic Design Stage, Wang Bo, Zhu Xinghu, Pei Wangjian, Ge Puta

Journal of China & Foreign Highway

To improve the accuracy and efficiency of complex three-dimensional traffic design, and provide basic digital data for the whole life cycle, this paper researched and investigated the application of BIM technology in the complex three-dimensional traffic design stage by taking the convergence project of the Qianhai section of Shenzhen Coastal Expressway and Nanping Expressway in Guangdong as a case study. Meanwhile, it put forward the BIM forward design schemes for the fields of roads, bridges, and tunnels, carried out secondary development, and built the three-dimensional parametric model, with the design results optimized. Additionally, design analysis and application were conducted to …

Go to article

Research On Interchange Reconstruction Design Of Minxiao Hub, Hu Tian, Tan Ximing, Yi Xuebin, Wei Hui Sep 2023

Research On Interchange Reconstruction Design Of Minxiao Hub, Hu Tian, Tan Ximing, Yi Xuebin, Wei Hui

Journal of China & Foreign Highway

Based on the design of the Minxiao hub interchange, this paper analyzed the technical problems of frequent traffic accidents after the initial reconstruction of Minxiao hub interchange, and put forward corresponding reconstruction suggestions. In the interchange design details, the design points about the dual lanes adopting single lanes and speed change lanes only put forward the distance requirement of 60 m for the transition sections, but whether the gradual changes of the travel lanes and hard shoulders are completed in the same road section or not is not clarified. The initial reconstruction of Minxiao hub interchange is designed to complete …

Go to article

Exploring Long-Term Protective Effect Of High Vertical Sand Barrier On Top Of Complex Longitudinal Sand Ridge In Taklamakan Desert, Jin Changning Sep 2023

Exploring Long-Term Protective Effect Of High Vertical Sand Barrier On Top Of Complex Longitudinal Sand Ridge In Taklamakan Desert, Jin Changning

Journal of China & Foreign Highway

By taking the high vertical sand barriers deployed on the top of the complex longitudinal sand ridges in the hinterland of Taklamakan Desert as the object, this paper investigated the sand protection effect from the long-term perspective on the basis of several years’ comparative observation. The result analysis shows that in addition to the recognized sand blocking effect, high vertical sand barriers also have a more important role of sand fixation, which means that the barriers can change the original overall movement of sand dunes into only the falling sand slope forward, with the windward slopes basically fixed. Even if …

Go to article

Study And Implementation Of Jacking Scheme Of Vertical Curve Beam With Two -Way Longitudinal Slope Without Adjusting Temporary Pier Top Elevation, Zhang Hongwu, Ke Hongjun, Chen Zhuoyi, Yang Wu Sep 2023

Study And Implementation Of Jacking Scheme Of Vertical Curve Beam With Two -Way Longitudinal Slope Without Adjusting Temporary Pier Top Elevation, Zhang Hongwu, Ke Hongjun, Chen Zhuoyi, Yang Wu

Journal of China & Foreign Highway

The bridge alignment design is the straight line+circular curve+straight two-way longitudinal slope vertical curve variable curvature steel bridge jacking. To deal with this problem, this paper analyzed the shortcomings of existing schemes such as real-time or multiple adjustments to the temporary pier top elevation, and proposed a jacking scheme of taking full advantage of the steel bridge’s characteristics including small flexural rigidity, strong adaptive deformation ability and high material strength, without adjusting the temporary pier top elevation. Additionally, the whole-process finite element simulation analysis was conducted on this scheme via a background project, with the calculation results revealing safety and …

Go to article

Data Analysis And Early Warning Platform For Bridge Health Monitoring Based On Matlab-Java Fusion, Wang Zhiwen, Mao Yongjia, Ding Youliang Sep 2023

Data Analysis And Early Warning Platform For Bridge Health Monitoring Based On Matlab-Java Fusion, Wang Zhiwen, Mao Yongjia, Ding Youliang

Journal of China & Foreign Highway

Bridge health monitoring provides important support for daily operation and maintenance management of bridges. Meanwhile, real-time analysis, evaluation and early warning of bridge health monitoring data are the core requirements for enhancing bridge monitoring and safety protection, which can help grasp the operation status of bridge structures in real time and guard against major safety risks of bridge operation. This paper combined traditional signal processing and statistical analysis with modern machine learning and deep learning, and developed a platform for real-time analysis and warning of bridge health monitoring data based on Matlab-JAVA integration. Online cleaning, feature extraction, performance evaluation and …

Go to article

Application Of Dry Sbs Modification Technology In Yanhai Highway, Zhang Han, Meng Chunlin, Zhao Mingfang, Lu Chuanzhong, Ji Guoqi Sep 2023

Application Of Dry Sbs Modification Technology In Yanhai Highway, Zhang Han, Meng Chunlin, Zhao Mingfang, Lu Chuanzhong, Ji Guoqi

Journal of China & Foreign Highway

Dry SBS-modified asphalt pavement technology is to produce SBS-modified asphalt mixtures by adding specific SBS modifiers, which aims to solve the performance degradation of SBS-modified asphalt in transportation and storage. By relying on the coastal highway repair projects, this paper compared the effects of different dry SBS mixing contents on the test results by the indoor dry SBS and matrix asphalt compatibility test and asphalt mixture performance evaluation test. Meanwhile, based on the test results, the recommended dry SBS mixing content for the coastal highway upper layer milling and resurfacing maintenance project was proposed and applied on a large scale …

Go to article

Energy Dissipation Optimization For Circular Culverts, David M. Admiraal, Chi Zhang Sep 2023

Energy Dissipation Optimization For Circular Culverts, David M. Admiraal, Chi Zhang

Nebraska Department of Transportation: Research Reports

Two types of energy dissipation devices at circular culvert outlets were investigated: full-length weirs and staggered weirs. Related literature was reviewed; a model broken-back circular culvert and dissipation basin was built; instrumentation was installed to measure discharge, piezometric head, and velocities; and four sizes of full-length and staggered weirs were tested over a range of discharges and tailwaters. Weir heights ranged from D/8 to 4D/8, in which D was the culvert diameter. The two weir types were subjected to two styles of tests: (1) tests unaffected by tailwater and (2) tailwater-influenced tests. For tall full-length weirs (3D/8 and 4D/8), basin …

Go to article

Kentucky Traffic Collision Facts 2022 Report, Paul Ross, Eric Green, Christopher Blackden, Kenneth R. Agent, Christopher Van Dyke Sep 2023

Kentucky Traffic Collision Facts 2022 Report, Paul Ross, Eric Green, Christopher Blackden, Kenneth R. Agent, Christopher Van Dyke

Kentucky Transportation Center Research Report

Kentucky’s Traffic Collision Facts is based on collision reports submitted to the Kentucky State Police Records Branch. As required by Kentucky Revised Statute 189.635: “Every law enforcement agency whose officers investigate a vehicle accident of which a report must be made...shall file a report of the accident...within ten days after investigation of the accident upon forms supplied by the bureau.” The stated purpose of this requirement is to utilize data on traffic collisions to improve the Commonwealth’s traffic safety program. Unless otherwise noted, data in this publication are for public roads only. Data contained in this report are based solely …

Go to article

Analysis Of Traffic Crash Data In Kentucky 2018-2022, Paul Ross, Eric Green, Christopher Blackden, Christopher Van Dyke Sep 2023

Analysis Of Traffic Crash Data In Kentucky 2018-2022, Paul Ross, Eric Green, Christopher Blackden, Christopher Van Dyke

Kentucky Transportation Center Research Report

This report documents analysis of traffic crash data in Kentucky. A primary objective of this study was to determine average crash statistics for Kentucky highways. Where used, rates were calculated for various highway types and for counties and cities. Difference criteria were used for exposure. Average and critical numbers, SPFs, and crash rates were calculated for various highway types in rural and urban areas. These metrics rely on crashes identified on highways where Annual Average Daily Traffic (AADT) volumes were available. Data in this report may be used to help identify problem areas. The other primary objective of this study …

Go to article

2023 Safety Belt Usage Survey In Kentucky, Erin Lammers-Staats, Derek S. Young, Kenneth R. Agent, Aidan Elias Sep 2023

2023 Safety Belt Usage Survey In Kentucky, Erin Lammers-Staats, Derek S. Young, Kenneth R. Agent, Aidan Elias

Kentucky Transportation Center Research Report

Data and results of a statewide observational survey used to establish the statewide usage rate for safety belts in Kentucky.

Go to article

Evaluation Of Durable Pavement Striping, William Staats, Erin Lammers-Staats Sep 2023

Evaluation Of Durable Pavement Striping, William Staats, Erin Lammers-Staats

Kentucky Transportation Center Research Report

Roadway pavement markings, colloquially referred to as “striping”, can be made of various combinations of paint and reflective beads. In the interest of aligning Kentucky with the state-of-the-art durable pavement marking practices of other states, the Kentucky Transportation Cabinet (KYTC) developed a research study aimed at improving pavement marking specifications and practices. This study reviewed current practices, identified potential improvements, and performed a systematic evaluation in a controlled environment on both asphalt and concrete roads. The state evaluated high-build waterborne paint, extruded and spray thermoplastic, polyurea, and preformed plastic tape, as well as several bead packages including M247, Missouri blend, …

Go to article

Inspection Training Course On Bridge Preventive Maintenance Activities, Danny Wells, Sudhir Palle Sep 2023

Inspection Training Course On Bridge Preventive Maintenance Activities, Danny Wells, Sudhir Palle

Kentucky Transportation Center Research Report

Despite over 30 percent of bridges in the United States having exceeded their 50-year design lives, most state departments of transportation (DOTs) lack the funding needed to replace bridges on a large scale. In response, agencies have increasingly turned to bridge preventive maintenance activities to prolong bridge service lives. These activities provide a safe and cost-effective way to slow the rate at which structures deteriorate, mitigate the effects of aging, and improve bridge functional condition. The Kentucky Transportation Cabinet (KYTC) has become increasingly reliant on preventive maintenance to preserve and extend the service lives of its steel and concrete bridges. …

Go to article

Sensitivity Analysis Of The Ideal Ct Test Using The Distinct Element Method, Shadi Saadeh, Maria El Asmar Sep 2023

Sensitivity Analysis Of The Ideal Ct Test Using The Distinct Element Method, Shadi Saadeh, Maria El Asmar

Mineta Transportation Institute

Cracking is a primary mode of failure for asphalt concrete (AC), resulting in road damage and deterioration, and leading to an increase in road hazards and fatalities. Studying the fracture behavior of AC is an effective way to learn how to best enhance their cracking resistance. To do this, the indirect tensile cracking laboratory test (IDEAL-CT) was developed and used to assess the AC cracking behavior by defining a unique index that allows the ranking of different mixes’ cracking resistance. The sensitivity of the test results to the test parameters is needed to monitor the test’s performance. Several parameters impact …

Go to article

Integrated Land Use And Transportation Modeling Considering The Impact Of Autonomous Vehicles, Roksana Asadi Aug 2023

Integrated Land Use And Transportation Modeling Considering The Impact Of Autonomous Vehicles, Roksana Asadi

Dissertations

The advent of autonomous urban mobility is expected to effect changes in land use patterns and urban development. A new framework for integrated land use and transportation system models that incorporate Autonomous Vehicles (AVs) and Shared Autonomous Vehicles (SAVs) will be needed to investigate the development of transportation and land use plans and policies. This study aims to analyze the impacts of AVs and SAVs on land use changes by defming scenarios that consider different shares of these emerging transportation modes. Also, this study explores the corollary effects of various land use factors by applying them to a case study …

Go to article

Bim And Digital Twins In Infrastructure Projects: An Overview From The Transportation Professional's Perspective, Natállia Mendes Aug 2023

Bim And Digital Twins In Infrastructure Projects: An Overview From The Transportation Professional's Perspective, Natállia Mendes

LSU Master's Theses

Transport infrastructure has undergone significant changes in recent years due to the digitalization of construction methods. Consequently, there is an increasing demand for more productive and cost-effective technologies to optimize various aspects such as time, cost, changes, waste, and errors in projects. Notably, technologies such as Building Information Modeling (BIM) and Digital Twin (DT) hold the potential to enhance the performance of infrastructure projects. While BIM has received substantial attention in recent years, Digital Twin is relatively new to the construction industry. This leads to a scarcity of studies on DT and its integration with other emerging technologies like BIM. …

Go to article

Deep Learning Techniques For Efficient Evaluation Of Asphalt Pavement Condition, Kamel Mahdy, Ahmed Zekry, Mohamed Moussa, Ahmed Mohamed, Hassan Mahdy, Mohamed Elhabiby Aug 2023

Deep Learning Techniques For Efficient Evaluation Of Asphalt Pavement Condition, Kamel Mahdy, Ahmed Zekry, Mohamed Moussa, Ahmed Mohamed, Hassan Mahdy, Mohamed Elhabiby

Mansoura Engineering Journal

For the last few decades, researchers have been devising a simple and cost-effective method to evaluate pavement distresses to give decision-makers adequate feedbacks about the pavement condition of a certain road. Fortunately, with the evolution and progression of computer vision tools and techniques, good results had been achieved regarding the detection, classification, and quantification of road distress. In this paper, a new efficient process of road distress analysis using deep learning models is introduced. This new process was tested on a collected road dataset to evaluate the efficiency and speed of this low-cost road maintenance system. Promising results were obtained …

Go to article

Understanding Evacuation Traffic Safety Issues During Hurricane Evacuation Using Machine Learning And Connected Vehicle Data, Zaheen E Muktadi Syed Aug 2023

Understanding Evacuation Traffic Safety Issues During Hurricane Evacuation Using Machine Learning And Connected Vehicle Data, Zaheen E Muktadi Syed

Electronic Theses and Dissertations, 2020-2023

Hurricane evacuation, ordered to save lives of people of coastal regions, generates high traffic demand with increased crash risk. To mitigate such risk, transportation agencies need to anticipate highway locations with high crash risks to deploy appropriate countermeasures. With ubiquitous sensors and communication technologies, it is now possible to retrieve micro-level vehicular data containing individual vehicle trajectory and speed information. Such high-resolution vehicle data, potentially available in real time, can be used to assess prevailing traffic safety conditions. Using vehicle speed and acceleration profiles, potential crash risks can be predicted in real time. Previous studies on real-time crash risk prediction …

Go to article

Transportation Electrification In Interdependent Power And Transportation Systems - Analysis, Planning, And Operation, Sina Baghali Aug 2023

Transportation Electrification In Interdependent Power And Transportation Systems - Analysis, Planning, And Operation, Sina Baghali

Electronic Theses and Dissertations, 2020-2023

Electric vehicles (EVs) are one of the eminent alternatives to decarbonize the transportation sector. However, large-scale EV adoption brings new challenges and opportunities to both transportation and power systems (TPSs). The challenges include the lack of understanding of EV driving behaviors and the associated charging demand (CD) distribution, the complex interaction of the decentralized decision-makers from TPSs, and the insufficient infrastructure from TPSs to accommodate the growing CD of EVs. On the other hand, the opportunities include benefiting the power systems by leveraging vehicle-to-grid (V2G) technologies and improving transportation mobility by incorporating strategic infrastructure planning. The goal of this dissertation …

Go to article

Truck Platooning Effects On Girder Bridges: Phase Ii-Service, Joshua Steelman, Jay Puckett, Daniel Linzell, Bowen Yang Aug 2023

Truck Platooning Effects On Girder Bridges: Phase Ii-Service, Joshua Steelman, Jay Puckett, Daniel Linzell, Bowen Yang

Nebraska Department of Transportation: Research Reports

Truck platooning—wirelessly linking two or more trucks to travel in a closely spaced convoy—is federally promoted to save fuel, improve the environment, and improve traffic operations. Platooning places trucks much closer than current design codes anticipate. While this strategy can provide higher fuel efficiency, it also can potentially overload structures. Previous reliabilitybased studies (Steelman et al., 2021; Yang et al., 2021) have focused on the Strength I limit state and have shown that trucks can operate at weights exceeding standard legal load limits even with short headways at operating-level reliability. However, service limit states in the AASHTO LRFD Bridge Design …

Go to article

Friction And Texture Equipment Correlation Study, David Hacker, Kean H. Ashurst Jr., Clark Graves Aug 2023

Friction And Texture Equipment Correlation Study, David Hacker, Kean H. Ashurst Jr., Clark Graves

Kentucky Transportation Center Research Report

The Kentucky Transportation Cabinet’s (KYTC) foremost goal is building and maintaining a safe road network. To accomplish this goal, KYTC needs reliable pavement friction and macrotexture data, both of which influence road performance and safety. KYTC currently measures fiction using a lock-wheel skid tester (AASHTO T 242), however, the agency has not been able to collect data at the network level due to equipment and personnel limitations. In 2020 the Cabinet commissioned a study to collect friction and macrotexture data. Investigators used a sideway-force coefficient routine investigation machine (SCRIM) (AASHTO TP 143) to measure friction. To understand the performance of …

Go to article

Combined Behavioral And Engineering Approach To Preventing Highway Fatalities, Benjamin Blandford, Reginald Souleyrette, Caitlin N. Pope, Tony Fields, Erin Lammers-Staats Aug 2023

Combined Behavioral And Engineering Approach To Preventing Highway Fatalities, Benjamin Blandford, Reginald Souleyrette, Caitlin N. Pope, Tony Fields, Erin Lammers-Staats

Kentucky Transportation Center Research Report

Traditional, single-discipline highway safety approaches can be augmented through multidisciplinary approaches that consider both engineering and behavioral interventions (e.g., education, enforcement, public outreach campaigns). Leveraging a systems-based conceptual framework of roadway safety, multiple forms of statistical and geospatial analysis, and SPF modeling and network screening, this report proposes and demonstrates methods for unpacking the influence of behavioral-related factors on crash occurrences and outcomes. The primary focus is on behaviors targeted in the Strategic Highway Safety Plan — aggressive driving, distracted driving, impaired driving, and driving without proper restraint (i.e., seatbelts). Based on application of these methods, the report highlights areas …

Go to article

Evaluating The Use Of A Near-Miss Reporting Program To Enhance Employee Safety Performance, Gabriel Dadi, Farshid Taherpour, Seth Atkins, Ashtarout Ammar, Jon Wilcoxson Aug 2023

Evaluating The Use Of A Near-Miss Reporting Program To Enhance Employee Safety Performance, Gabriel Dadi, Farshid Taherpour, Seth Atkins, Ashtarout Ammar, Jon Wilcoxson

Kentucky Transportation Center Research Report

Using safety incidents and crashes to improve safety performance is an outdated and reactive practice in safety and health programs. One component of a modern approach to safety is a near-miss reporting program. This type of program tracks close calls or near misses that do not result in an incident or crash, but which often can be an early indicator that one may happen. While most construction companies have implemented some methods for reporting near-miss events, many agencies, such as the Kentucky Transportation Cabinet (KYTC), struggle getting employees to report near misses. To fill this gap, potential factors that result …

Go to article

First Prev Next Last