Transportation Engineering Commons^™

Spatial And Temporal Patterns Of Bike-Share Use In A Small City: A Case Study Of Fort Smith, Arkansas, Brianna L. Buenger

Civil Engineering Undergraduate Honors Theses

Many small and mid-sized cities in the United States face ongoing transportation challenges due to limited public transit options. This can prevent residents from being able to reach essential destinations. While bikeshare systems have been widely studied in large metropolitan areas, there is limited understanding of how usage patterns vary across space, time, and trip characteristics in small-city contexts. This study addresses this gap by examining spatial and temporal patterns of bikeshare use in a small U.S. city through a case study of the Fort Smith, Arkansas, SMILIES bikeshare program. Using approximately 10,000 trips over three years, the analysis examines …

Case Article—Optimizing Transportation And Equity In A District Zoning Problem For Orville Public Schools, Kelly M. Sullivan, Ashlea Bennett Milburn

Industrial Engineering Faculty Publications and Presentations

“Optimizing transportation and equity in a district zoning problem for ORville public schools” is a case developed to expose students to an optimization decision problem with ethical considerations incorporated. Specifically, students are asked to solve a school district zoning problem in which all residential addresses in a school district must be assigned to middle schools having capacity limits on the numbers of students that they can accommodate.

Enhancing Asphalt Mix Design Through Film Thickness And Bailey’S Gradation Method, Lydia Quinn

Civil Engineering Undergraduate Honors Theses

Contemporary asphalt research aims to strike a balance between rutting and fatigue cracking to enhance pavement longevity. The performance of asphalt mixtures is influenced by factors such as aggregate gradation and asphalt film thickness. Although gradation typically adheres to the mid-gradation method, asphalt film thickness is included in certain mix designs, even though it is not universally regarded as an essential parameter. Nonetheless, no current method primarily addresses both gradation and asphalt film thickness together. In this research, aggregate gradations were designed using the principles of Bailey’s method along with various other criteria such as control points, the dust to …

A Statistical Investigation Of The Parameters Influencing Rutting And Cracking Performance In Asphalt Mixtures, Alexis Light

Civil Engineering Undergraduate Honors Theses

Durable pavement is essential for modern transportation infrastructure, especially in the United States of America which boasts over 8.5 million lane miles of roads and highways. Despite advanced construction techniques, asphalt pavements are susceptible to rutting and cracking, significantly affecting their performance and maintenance costs. Current methods for analyzing rutting and cracking in asphalt mixtures rely on various parameters, leading to measurement variability. This highlights the need for more rigorous analysis to explore the relationship between mix design variables and pavement performance. This research explores the IDEAL-CT and APA data from 171 mix designs collected by the Arkansas Department of …

Unlocking Telecommuting Patterns Before, During, And After The Covid-19 Pandemic: An Explainable Ai-Driven Study, Adedolapo Ogungbire, Suman Kumar Mitra

Civil Engineering Faculty Publications and Presentations

The COVID-19 pandemic has instigated a global paradigm shift in employment practices, precipitating a widespread transition to telework. While past events had no long-lasting effect on the continued working conditions of the population, it is unclear what a prolonged need for telecommuting on such a nationwide scale would continue to have on the working population. This study uses an explainable artificial intelligence approach to investigate the changes in those telecommuting across three periods: i) pre-pandemic, ii) pandemic, and iii) post-pandemic periods. Machine learning methods, including decision trees, random forest, extreme gradient boost, naïve Bayes, and artificial neural networks, were developed …

Quantifying Lock Criticality For Inland Waterway Navigation Using An Agent-Based Simulation, Ashwin Narayan

Industrial Engineering Undergraduate Honors Theses

Inland waterway travel has tremendous potential to improve multimodal transportation in the United States due to its environment-friendly and safe nature. Waterway travel has proven to be much cheaper per ton-mile and more fuel efficient than trucks. Millions of dollars have recently been invested in inland waterway networks to facilitate travel. The waterway infrastructure must be resilient to enable efficient waterway travel and prevent unnecessary delays. Locks, an important component of waterway infrastructure, enable vessels to travel between waterways of varying depths and must be maintained consistently to avoid unexpected failures. However, with limited resources, it is difficult to preserve …

Addressing Data Limitations Of Commercial Waterways Via Machine Learning And Stochastic Optimization, Sanjeev Bhurtyal

Graduate Theses and Dissertations

Freight transportation is a crucial component of the US economy, with truck, rail, and water contributing significantly to the Gross Domestic Product (GDP). However, challenges arise in maintaining infrastructure capacity to accommodate the growing tonnage and value of freight transportation. Waterways offer high efficiency and environmental friendliness, with the capacity to transport substantial cargo volumes. Utilizing waterways can alleviate bottlenecks in landside transportation, accommodating the rising tonnage of commodity flow in the US. Despite the advantages of waterway transportation, the data limitations hinder informed decision-making regarding port operation and infrastructure investment. The lack of granularity and timeliness in available data …

Examining The Impact Of Customer Rfp Characteristics On Award Compliance, Laasya Ravipati

Data Science Undergraduate Honors Theses

In the context of intermodal transportation, understanding the dynamics of award compliance holds significant importance for operational efficiency and strategic decision-making. Award compliance refers to the percentage of awarded freight volume that is realized, indicating the extent to which contractual agreements are fulfilled. This analysis delves into the intricate relationship between customer characteristics and award compliance, aiming to provide valuable insights into the variability and predictability of compliance rates. By analyzing Request for Pricing (RFP) data and primary awarded freight volumes, the study seeks to address the need for more accurate volume estimations, crucial for sales planning, revenue projections, and …

Decoding Usage And Adoption Behavior Of The Low-Carbon Transportation Market: An Ai-Driven Exploration, Vuban Chowdhury

Graduate Theses and Dissertations

The transportation sector stands as a significant contributor to greenhouse gas emissions in the United States, with its environmental impact steadily escalating over the past few decades. This has prompted government agencies to facilitate the adoption and usage of low-carbon transportation (LCT) options as alternatives to fossil-fuel-powered transportation. LCTs include modes of transportation that minimize the overall carbon footprint of the transportation sector by relying on energy sources that are environmentally sustainable. These sustainable transportation options have also garnered significant interest in the transportation research community. For government agencies and researchers alike, a comprehensive understanding of the adoption and usage …

Examining The Impact Of The Covid-19 Pandemic On Older Adults' Activity Participation And Mode Usage In A Rural State: A Case Study Of Arkansas, Arna Nishita Nithila

Graduate Theses and Dissertations

The objective of the study was to investigate the impact of the COVID-19 pandemic on the activity participation and mode usage of older adults residing in Arkansas, a predominantly rural state. Leveraging primary data collected from 1,017 older adult participants, the study employed Latent Class Analysis (LCA) to capture older adults’ heterogeneity in travel behavior and found three distinct classes: Frequent Traveler, Moderate Traveler, and Non-Traveler, based on their activity participation, mode usage during the pandemic and the pandemic’s impact on their trips. Subsequently, a Multinomial Logit Model (MNL) was employed to examine how socio-demographic attributes, residential locations, and health …

Determining The Effect Of The Presence Of Food Deserts On The Number Of Crashes In Census Tracts In Arkansas, Lizbeth Juarez-Bartolo

Graduate Theses and Dissertations

Food deserts, areas with limited access to grocery stores which sell fresh produce, dairy, and meats, are a growing concern in many communities. The presence of a food desert is known to cause great impacts on the physical health of the people residing within them, but there is little to no research on a food desert’s influence on the traffic safety of the location in which it encompasses. Based on previous studies into food deserts, studies suggest that food inaccessibility is mostly felt by rural residents. Since rural residents must travel farther distances on more hazardous rural roadways to access …

Developing Asphalt Mix Design Specifications Based On Apa And Ideal-Ct Testing, Jonathan Stonestreet

Graduate Theses and Dissertations

Some asphalt mixes, following the Superpave mix design procedure, have been reported to be too stiff, making cracking a prevalent form of pavement distress. Additionally, cracking has been reported to be the main form of distress of asphalt pavements in the State of Arkansas. These facts have heightened state agencies’ interest in better performing asphalt pavements, with Arkansas resolving to explore performance-based balanced mix designs (BMD), not yet explored in the state. The primary objective of this document is to present the completed study of balanced mix designs, based on the rutting and cracking potential of asphalt pavement mixtures through …

Impacts Of Diagonal Crosswalk Misuse, Elizabeth Francis

Civil Engineering Undergraduate Honors Theses

A diagonal crosswalk paired with an all-red phase traffic signal is an effective approach to manage intersections with high pedestrian volume. This allows pedestrians to cross both north-south and east-west bound roads at the same time. However, ineffective diagonal crosswalk marking, and lack of signs reduces the use of diagonal crosswalks which in turn results in jaywalking, often in unsafe capacities. The objective of this study is to determine the impacts of pedestrian-caused delay and safety impacts due to the misuse of a diagonal crosswalk. To better understand the impacts, a camera-based data collection was conducted during a four-hour period …

Improving Building Cfd Peak Pressure Computation Using Les With A Focus On Inflow Turbulence Methods And Grid Spacing Size., Zahra Mansouri

Graduate Theses and Dissertations

Structural failures by extreme winds often leads to economic losses and even deaths. Proper design of buildings requires accurate estimation of wind loads to prevent structural damage. Using routine guidelines generally leads to the underestimation of buildings’ peak pressures, in which most failures occur. To estimate wind loads more accurately three different methods (i.e., field measurement, wind tunnel (WT), and computational fluid dynamics (CFD)) are in use. A well-validated CFD provides more flow field details at lower costs compared to field measurements and WT. As strong winds are extremely turbulent, the effects of turbulence in wind should be incorporated into …

Effect Of Varying Amounts Of Sandstone On The Performance Of Asphalt Mixtures In Arkansas, David Murphy

Graduate Theses and Dissertations

There are many different species and subspecies of aggregate used across the state of Arkansas, and the rest the country. However, it cannot be presumed that the amount and type of these aggregates will be compatible with the commonly used asphalt binder of an area; this can lead to performance issues and premature pavement damage. It has been suspected in Arkansas that an excessive amount of sandstone in asphalt mixtures may be a culprit of some of these premature pavement damage issues, especially regarding the moisture susceptibility of a pavement. This study aimed to analyze the performance effects of using …

Refining Particle Size Specification For Asphalt Emulsion, Pedro Luis Diaz Romero

Graduate Theses and Dissertations

Pavements begin to deteriorate as soon as they are constructed, and traffic is released. The rate at which a pavement deteriorates depends on the material quality, the environment, and the loads carried. To properly preserve pavements and extend their life, various pavement preservation treatments are used. For flexible pavements, a considerable number of these treatments use asphalt emulsion (which are refer to simply emulsions from here on). Emulsions are classified based on their particle charge and reactivity. Emulsions used in chip seals are usually of rapid set reactivity and are classified based on tests over fifty years old.

It has …

Analyzing Vulnerabilities In The Northwest Arkansas Highway Network Using Mathematical Optimization, Brandon Jerome

Industrial Engineering Undergraduate Honors Theses

The highway and bridge network is a critical infrastructure that allows for the free transportation of citizens and enables truck-borne freight transportation. Disruption of this system could be caused by a terrorist attack, natural disaster, growth of population, required repairs and upgrades, or collapse caused by old age or malfunction. In the event of a disruption cities and regions can experience increased traffic and supply chain shortages, thus causing cascading effects throughout surrounding areas. With this motivation, we develop a network interdiction optimization model to identify a limited subset of roads that, if disrupted, causes the greatest increase in the …

Design Of A Freight Transportation Outreach Curriculum, Breanna Stoesz

Civil Engineering Undergraduate Honors Theses

This project is centered around finding a solution to the shortage of truck drivers within the freight industry. Specifically, this project aims to lessen this shortage by ensuring potential future drivers are aware of the benefits of the industry and are encouraged to consider this career path for themselves. By producing an engaging and educational freight transportation curriculum for middle and high school students to go through in outreach programs, these students would have an increased likelihood of joining the trucking profession and encourage others to become informed about the profession as well. In addition to the direct driving role, …

Determining Earthquake Impacts On Arkansas' Roadway Network: An Application Of Hazus., Simon Rothwell

Civil Engineering Undergraduate Honors Theses

Natural hazards are a dangerous and unpredictable aspect of life on earth. They can cause devastating damage to our surroundings that makes movement of people, goods, and emergency services difficult. There is a need to plan for these disasters to ensure that damages to our infrastructure and people are minimized. It can be difficult for planners to determine which parts of a roadway network are most vulnerable to a specific disaster and what their impact on the rest of the network may be. This thesis uses a nationally available natural disaster estimation tool developed by FEMA called “Hazus” (FEMA, 2020). …

Comparing The Stiffness Of Cold In-Place Recycled Asphalt Pavement To Hot Mix Asphalt: Determining The Reproducibility Of The Stiffness Rebound Test, Tanner Turben

Civil Engineering Undergraduate Honors Theses

The Stiffness Raveling Mechanism Test (SRMT) was originally developed as an indirect measure of pavement stiffness to determine a pavement’s tendency to ravel, a type of damage. Regarding rehabilitation of existing roadways by Full Depth Reclamation (FDR) Cold In-Place Recycling (CIR), concern of field repeatability was expressed (Hill & Braham, 2016).

An analysis of lab-compacted samples of CIR and Hot Mix Asphalt (HMA) was performed to determine if the results could be reproduced between CIR and HMA. Additionally, the experiment observed the effects of percent air voids, temperature, and moisture conditioning on CIR and HMA. Three samples were prepared for …

Community Transportation Needs And Willingness To Use Shared Micromobility: A Case Study Of Fort Smith, Arkansas, Anthony Michael Kammerer

Civil Engineering Undergraduate Honors Theses

Shared micromobility is utilized in “targeted service areas with the usage generally intended for short trips such as "first- and last-mile" connections to complete trips made via other modes, including transit” (Price et al., 2021). In the United States, this practice has especially taken off with the implementation of sharing-based systems. This is evidenced by ridership numbers in the United States growing from 84 million riders nationwide in 2018 to 136 million riders in 2019 (NACTO, 2020). Users often use their smart phone or another similar device to unlock the vehicle after paying a fee on the device through their …

An Investigation Of The Flexural Strength And Toughness Of Hybrid Plain And Fiber Reinforced Concrete For Pavement Applications, Wesley Keys

Graduate Theses and Dissertations

For decades, many solutions have been evaluated to combat cracking in concrete pavements. The study presented in this paper evaluates and compares the flexural performance under a third point loading configuration of plain concrete (PC) beams, fully fiber reinforced concrete (FRC) beams, and hybrid PC and FRC beams, with a top PC and bottom FRC layer. The purpose of this hybrid approach was to provide FRC in only half the section, saving cost, while providing a PC surface layer that is easier to finish. All PC top layers were applied at an age of 7-days, considered a reasonable time for …

Retrospective Analysis Of Impacts Of Highway Bypass And Widening Projects, Sanjeev Bhurtyal

Graduate Theses and Dissertations

Community members often worry that highway projects may have negative impacts on their local economies. This is typical for highway bypass and widening projects in small cities (population less than 50,000). It is a challenge for planners to balance public concerns of economic decline with desired project outcomes of mobility and safety. Much of this challenge stems from a lack of information on post-project outcomes related to economic and safety impacts of new construction projects. Thus, there is a need for an evidence-based framework to help planners with the decision-making process and better inform the community on potential outcomes. This …

Improve The Prediction Of Camber, Deflection, And Prestress Losses In Precast, Prestressed Concrete Bridge Girders, Ahmed Ali Hussein Al Mohammedi

Graduate Theses and Dissertations

Many precast, prestressed concrete girders have camber less or higher than the design values. This discrepancy between the design and the actual camber creates construction problems when installing the cast-in-place concrete deck. The objective of this research was to improve the accuracy of estimating long-term camber, deflection, and prestress losses of precast, prestressed concrete girders.

The experimental program consisted of measuring concrete properties and performing field measurements of camber, deflection, and prestress losses for girders in Arkansas. The investigation involved testing nine full-scale girders from two prestressed concrete plants that regularly supply concrete girders to bridge projects in Arkansas. The …

Factors Influencing The Usage Of Shared E-Scooters : A Case Study Of Chicago, Farzana Mehzabin Tuli

Graduate Theses and Dissertations

The rapid popularity growth of shared e-scooters creates the necessity of understanding the determinants of shared e-scooter usage. This thesis estimates the impacts of temporal variables (weather data, weekday/weekend, and gasoline prices) and time-invariant variables (socio-demographic, built environment, and neighborhood characteristics) on the shared e-scooter demand by using four months (June 2019- October 2019) period of data from the shared e-scooter pilot program in Chicago. The study employs a random-effects negative binomial (RENB) model that effectively models shared e-scooter trip origin and destination count data with over-dispersion while capturing serial autocorrelation in the data. Results of temporal variables indicate that …

Relating The Dongre Workability Test To Cold In-Place Recycled Asphalt Pavements, Gus Williams

Civil Engineering Undergraduate Honors Theses

The Dongre Workability Test (DWT) is a test for determining an asphalt pavement’s relative workability from the stress-strain curve of a sample. While the DWT has seen favorable results with warm mix and hot mix asphalt, Casillas and Braham (2020) attempted to apply this test to cold in-place recycled (CIR) asphalt pavements with limited results. This paper looked at the process of reexamining the DWT method to more favorable results with CIR samples. Phase 1 consisted of defining ten possible metrics from the stress-strain curve and applying them to samples with three different curing conditions. From these preliminary results, the …

Data-Driven Methods To Address Truck Parking Shortages For Long-Haul Commercial Truck Drivers, Sharif Mahmud

Graduate Theses and Dissertations

Truck parking is a critical concern for both the trucking industry and the truck drivers. Long-haul commercial truck drivers rely on safe and adequate parking to support interstate commerce, which has become a challenge due to parking shortages. The recent electronic logging device (ELD) mandate, forcing a strict compliance to hours of service (HOS) regulations, are leading to higher demand for parking. A number of federal, regional, and local studies reveal that truck activity will increase and truck parking demand will outpace parking supply in the coming years. Such parking shortages likely disrupt freight flows and pose risks to truck …

Mitigating Calcium Oxychloride Damage In Cementitious Paste And Concrete Utilizing Supplementary Cementitious Materials, Casey Jones

Graduate Theses and Dissertations

It is understood among engineers in the United States (U.S.) that improvement is needed throughout the transportation infrastructure. In the 2021 Infrastructure Report Card produced by the American Society of Civil Engineers, the roadways of this nation merit a D. This leaves room for improvement in order to provide durable pavements throughout this nation. Areas with significant winter weather may have exacerbated effects in decreased roadway longevity due to freezing/thawing cycles and the use of chemical deicers to mitigate gelid roadway conditions. Much research focuses on surface scaling and reinforcement corrosion using these materials; however, joint deterioration, due to chemical …

A Machine Learning Approach To Understanding Emerging Markets, Namita Balani

Graduate Theses and Dissertations

Logistic providers have learned to efficiently serve their existing customer bases with optimized routes and transportation resource allocation. The problem arises when there is potential for logistics growth in an emerging market with no previous data. The purpose of this work is to use industry data for previously known and well-documented markets to apply data analytic techniques such as machine learning to investigate the uncertainty in a new market. The thesis looks into machine learning techniques to predict miles per stop given historical data. It mainly focuses on Random Forest Regression Analysis, but concludes that additional techniques, such as Polynomial …

Design And Validation Of A High-Power, High Density All Silicon Carbide Three-Level Inverter, Zhongjing Wang

Graduate Theses and Dissertations

Transportation electrification is clearly the road toward the future. Compared to internal combustion engine, the electrified vehicle has less carbon-dioxide emission, less maintenance costs and less operation costs. It also offers higher efficiency and safety margin. More importantly, it relieves human’s dependence on conventional fossil energy. In the electrification progress, the revolution of electric traction drive systems is one of the most important milestone. The traction system should keep high efficiency to avoid performance reduction. Moreover, the motor drive should be designed within limited space without sacrificing output power rating. Based on the road map from US Drive Electrical and …