Transportation Engineering Commons^™

Research On Construction Monitoring Of Continuous Rigid Frame Bridge Based On Knn Algorithm, Liu Jianlin, Pan Kai, Yang Gang, Wang Junming

Journal of China & Foreign Highway

To address common issues in bridge construction monitoring,such as sensor damage and failure in strain and displacement measurements,this study took the Nanliu Jialing River Bridge as a case and proposed a method based on the K-nearest neighbor (KNN ) algorithm to reconstruct missing construction monitoring data.ANSYS Workbench was used to establish a finite element model (FEM ) of the bridge construction process to verify the effectiveness of the KNN algorithm in the presence of missing bridge construction monitoring data.The results show:① KNN algorithm can assist in filling short-term data gaps caused by damage to strain and displacement sensors during bridge …

Shear Strength Test Of Uhpc-Nc Bonding Surface, Zhang Shichang, Yan Donghuang, Liu Yun, Yuan Sheng, Wang Shuo

Journal of China & Foreign Highway

As a cement-based composite material with excellent mechanical properties,ultra-high performance concrete (UHPC ) demonstrates outstanding performance in tensile and compressive strength,durability,and impermeability.This material is suitable for the reinforcement and repair of normal concrete (NC) bridge structures.To study the shear behavior of the UHPC-NC bonding interface and its reinforcement effect,this paper conducted interface shear tests using Z-shaped specimens and designed a total of six sets of comparative specimens.The influence of parameters such as the planted bar ratio,implantation depth,and bonding surface size on the shear strength was explored.Through experiments,the load –slip curve and the shear strength data were obtained.The results show that:① …

Field Measurement And Analysis Of Wind Characteristics At Xuefenghu Bridge Site, Yu Wenhao, Yi Lu

Journal of China & Foreign Highway

Wind field parameters at bridge sites serve as an important basis for wind-resistant bridge design.The terrain surrounding the Xuefenghu Bridge is unique-mountains flank both sides in the bridge-aligned direction,and the bridge spans the wide surface of the Zhexi Reservoir.In order to investigate the wind field characteristics under such complex topographic conditions,an observation,acquisition,and wireless data transmission system was established at the bridge site.A one-year in-situ wind measurement campaign was conducted,and the characteristics of average wind and fluctuating wind were deeply analyzed.The results show that the average wind speed at the bridge site generally follows a Weibull distribution,and the average wind direction …

Experimental Study On Shear Resistance Of Existing Prestressed Concrete Hollow Slabs, Lu Youfu, Di Jin, Qin Fengjiang, Sun Yifei

Journal of China & Foreign Highway

Prestressed concrete hollow slabs are widely used in small- and medium-sized span highway bridges in China.With the increase in load ratings,many hollow slab bridges built in early periods fail to meet the current specifications for shear bearing capacity.Nevertheless,these hollow slabs continue to function adequately under existing vehicle loads,making it essential to conduct an in-depth investigation into their shear bearing capacity.Shear bearing capacity tests were conducted on five 16 m-span hollow slabs dismantled from a renovation and expansion project,including three top slabs with a 15 cm cast-in-place concrete structural layer.Various parameters,such as load-displacement curves,web concrete strain,cracking loads,crack development patterns,failure modes,and ultimate …

Analysis Of Flexural Bearin G Ca Pacity Of Concrete Box Girders Reinforced With, Cfrp Mesh End Anchorshu Guihua

Journal of China & Foreign Highway

Carb on fiber reinforced polymer (CFRP ) composite s have significant advantages in the reinforcement of concrete structures.It is worth systematically studying the effect and mechanism of applying this material in embedded end-anchored reinforcement of concrete box girders on improving the load-bearing capacity of the component.Based on the Abaqus finite element analysis (FEA ) platform,two numerical analysis models considering slip contact and full bonding contact between CFRP mesh and polymer mortar were established.A full-scale concrete box girder model test was conducted for validation.The results show that the FEA results are in good agreement with the experimental results.The FEA model that …

Wind Tunnel Test On Wind-Resistant Performance Of Suspended Monorail Cable-Stayed Bridge, Chen Yujiang

Journal of China & Foreign Highway

To investigate the wind-induced vibration of a suspended monorail bridge,a full-bridge aeroelastic model at a 1∶40 scale was designed and fabricated according to the geometrical parameters and dynamic characteristics of the real bridge.Wind tunnel tests on the bridge in both the completed state and the maximum cantilever state were conducted under different conditions,including uniform flow and turbulent flow,yaw angles of ± 45°,±30°,±15°,and 0°,and wind attack angles of ‒ 3°,0°,and + 3°.Both vertical and torsional displacements of the structure under different wind speeds were measured.The test results show that the vertical displacements and torsional responses of the cable-stayed bridge increase when …

Research On Autonomous Deviation Correction Of Tunnel Boring Machines And Parameters Based On Machine Learning, Zhang Jun, Li Maopeng

Journal of China & Foreign Highway

In order to solve the problem of realizing the autonomous deviation correction of tunnel boring machines (TBMs ), a TBM deviation correction control method that integrated the random forest (RF) algorithm with the genetic algorithm (GA) was proposed based on actual engineering data.The method combined a prediction model with an optimization model,using target deviation values as input to invert and output the required TBM deviation correction parameter values,thereby further improving the automation level of TBM deviation correction.By comparing it with the actual data,the feasibility of the model was verified.The results show that the RF algorithm-based prediction model achieves an R2 …

Study On Mechanical Effect Of Backfill Construction In Orthogonal Underpass Section Of An Open-Cut Interchange Tunnel, Li Qingda, Li Dexing, Yu Tingshun, Han Xi, Liu Jiansong

Journal of China & Foreign Highway

This study investigated the mechanical effects of backfill construction in the orthogonal underpass section of a full-section complex open-cut interchange tunnel.The research was based on the small-clear-distance interchange tunnel project at the extension section of Jinzhou Avenue and Xingguang Avenue in Chongqing.A combined approach of numerical simulation and on-site in-situ test measurement was adopted to analyze the influence of different backfill materials,tunnel cross-section types,and complex construction procedures on the mechanical behavior of the underpass tunnel.The mechanical effects of backfill construction in the orthogonal underpass section were determined.The following findings are revealed:During the backfill construction process,the displacement and internal force of …

Research On Automatic Review Method Of Highway Bim Based On Knowledge Graph, Wang Wuyu, Shao Kebo, Zhang Feng

Journal of China & Foreign Highway

Building information modeling (BIM ),characterized by multi-dimensional modeling and multi-source data integration,is becoming a key technology to promote the innovation and digital transformation of the highway design industry.Taking BIM as the design deliverable is an inevitable trend in the future development of highway engineering design.However,the current highway BIM review is mainly conducted manually,which brings about problems such as low efficiency,susceptibility to errors,and high subjectivity.This makes it difficult to adapt to the review requirements of the three-dimensional (3D) digital design mode.To this end,this study proposed an automatic review method of highway BIM based on a knowledge graph.By constructing the knowledge graph …

Research On Multi-Classification Prediction Of Traffic Accident Severity On Mountainous Expressways, Wang Hao, Yan Jie, Guo Jianmin, Zhang Yu, Sun Chengji

Journal of China & Foreign Highway

To enhance the safety level of mountainous expressways and establish an accurate and effective prediction model for traffic accident severity,this study analyzed 2 484 traffic accidents on mountainous expressways in Chongqing from 2010 to 2016.A total of 17 influencing factors were selected from four aspects:human,vehicle,road,and environment,to serve as explanatory variables.Partial proportional odds model,random forest algorithm,and XGBoost algorithm were used to construct multi-class prediction models for traffic accident severity.The model performance was evaluated using the confusion matrix,accuracy,and minority class recall rate.The results show that the XGBoost model achieves the highest prediction accuracy in multi-class prediction of traffic accident severity on mountainous …

Application And Analysis Of Energy-Conservation And Carbon-Reduction Technologies In Green Highways, Huang Xuewen, Wang Kai, Huang Shanqian, Xiong Xinzhu, Fu Jinsheng

Journal of China & Foreign Highway

To improve the low-carbon development level of highway engineering,this study relied on a typical green highway in Anhui Province and established a calculation model for energy-conservation and carbon-reduction in highway engineering based on the emission factor method.A combination of quantitative and qualitative approaches was adopted to evaluate the benefits of 33 energy-conservation and carbon-reduction technologies in reducing life cycle energy consumption and carbon emissions,based on life cycle assessment (LCA ) theory.The results show that during the material production stage,through channel resource coordination and the application of low-carbon,energy-saving materials,comprehensive reductions in the embodied carbon can be achieved.During the construction stage,energy consumption …

Reference And Inspi Ration From Low-Carbon Development Experience Of Foreign Highway Infrastructure, Lu Chunying, Gao Shuohan, Du Xueyua N, Jian Li, Wang Xinjun, Kong Yaping

Journal of China & Foreign Highway

In order to provide supp ort for the scie ntific formulation of low-carbon highway infrastructure development policies in China,empirical analysis,comparative analysis,and other methods were utilized,and the construction goals and action strategies of low-carbon highway infrastructure in the United Kingdom,the United States,and Australia were sorted out.Advanced experience in the development of low-carbon highways abroad was summarized.On this basis,combined with the current situation and existing problems of low-carbon development of China ’s highway infrastructure,the following countermeasures and suggestions were proposed:① strengthening top-level design and formulating low-carbon development goals and paths;② implementing the concept of life cycle and strengthening the research and promotion …

Analysis And Control Of Impact Of Wide Waterway Excavation On Adjacent Bridge Pile Foundations, Zhang Peisheng, Qiao Lyu, Sheng Jianchao, Sheng Haoxiang, Liu Hanchen, Wang Zhe

Journal of China & Foreign Highway

When excavating a waterway beneath an existing bridge,the pile foundations are subjected to unloading from excavation and the loading from the superstructure,which may lead to excessive displacement and potential safety hazards.Based on the underpass project of the Desheng Expressway Bridge along the Zhejiang section of the Beijing ‒ Hangzhou Canal,this study established a three-dimensional finite element model (FEM ) and combined it with field monitoring to investigate the impact of wide waterway excavation on adjacent bridge pile foundations and corresponding control measures.A novel combined control method involving a retaining wall with supporting piles and fully enclosed isolation piles was proposed.The …

Influence Of Horizontal Curve Radius On Vehicle Fuel Consumption And Pollutant Emissions On Tw O-Lane Highways, Tu Shengwen, Lei Meimei, Guo Wenyu

Journal of China & Foreign Highway

To investigate the influence of horizontal curve radius on vehicle fuel consumption and pollutant emissions on two-lane highways,this study developed a model based on running speed theory,vehicle driving dynamics,and a fuel consumption and emission analysis system.Fuel consumption and emissions of CO2,CO,HC,and NOx were calculated for a passenger car traveling along horizontal curves under three design speeds:40 km/h,60 km/h,and 80 km/h.The results show that the horizontal curve radius has a significant effect on vehicle fuel consumption and pollutant emissions.The trends of fuel consumption,CO2,and NOx emissions vary consistently with curve radius,while CO and HC emissions follow a similar but different trend.At the …

Influence Of Mixing Duration And Absorption Characteristics Of Superabsorbent Polymers On The Fresh And Hardened Properties Of High-Performance Concrete, Yu Cun Gu, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study investigates the combined influence of superabsorbent polymers (SAPs) with distinct absorption kinetics and extended mixing sequences on the rheological, mechanical, and transport properties of high-performance concrete (HPC). Two SAPs—an ionic acrylamide-co-acrylic acid copolymer (SAP-P) and a non-ionic acrylamide polymer (SAP-B)—were incorporated at an internal curing level of 100%. The impact of extended mixing times (3, 5, and 7 min) following SAP addition was systematically evaluated. Results showed that longer mixing durations led to increased superplasticizer demand and higher plastic viscosity due to continued water absorption by SAPs. However, yield stress remained relatively stable owing to the dispersing effect …

Bike/Ped Data Collection And Model Calibration, Eirini Stavropoulou, Dionysios Tzamakos, Nikiforos Stamatiadis, Reginald Souleyrette, Teng Wang

Kentucky Transportation Center Research Report

Motivated by an uptick in pedestrian and bicycle traffic, as well as the inclusion of pedestrian and bicyclist weights in the Strategic Highway Investment Formula For Tomorrow, the Kentucky Transportation Cabinet (KYTC) has made significant investments in transportation facilities for nonmotorized users. Despite an intensified focus on the needs of nonmotorized users, KYTC has not yet established a formal program to track the number of people walking, biking, skateboarding, and using micromobility devices statewide. Based on a review of methods and technologies for counting nonmotorized users; analysis of counting programs established by local, state, and regional transportation agencies; and a …

Congestion And Travel Time Reliability Performance Measures For Shift 2026, Mei Chen, Eugene Antwi, Xu Zhang

Kentucky Transportation Center Research Report

Researchers obtained and processed probe speed data from HERE Technologies and integrated them with the Kentucky Transportation Cabinet’s highway inventory to develop congestion and travel time reliability performance metrics. This report summarizes analyses conducted using HERE speed data for 2022 – 2023. HERE data were processed using an established methodology, after which they were aligned with Kentucky’s highway inventory network. Analysis found that 2022 – 2023 HERE data offer significant improvements in coverage and quality over previous years. For locations that lacked sufficient data, researchers used HERE’s speed model to estimate hourly speeds. Data were used to calculate congestion and …

Constructing A State: Canals And The Transformation Of The Economy, Politics, And Finance In Nineteenth-Century New York, Youwei Xing

All Dissertations

This dissertation consists of three essays in economic history, unified by a focus on one of America's earliest transportation infrastructures, the canal system, in nineteenth-century New York. Each chapter explores a different aspect of the state's transformation: its economy, politics, and finance, each of which helped construct New York as the Empire State.

The first chapter studies the economic impact of canals on economic modernization from three aspects: sectoral transition, urbanization, and banking development. Contrary to much of the modern literature finds transportation infrastructure leads to decentralization, I find the opposite-evidence of centralization. Specially: (1) canal towns experienced a transition …

Fleet Algorithm Design For Pooled Rideshare: Integrating Human Factors, Simulation, And Optimization, Joseph Paul

All Dissertations

This dissertation explores the study the integration of human factors modeling and rideshare fleet control algorithms. Pooled rideshare is a unique transportation mode offering that allows riders increased flexibility and accessibility over public transportation, and decreased cost relative to personal vehicles or traditional rideshare. Additionally, relative to personal vehicles, pooled rideshare offers reduced costs and options for those with difficulty obtaining transportation. Prior research in the space typically focused on modeling human behavior, or optimizing system performance, but a lack of integration of the concepts leads to unrealistic or underutilized outcomes. To tackle this problem, novel rideshare assignment, and repositioning …

Resilience Of Interdependent Transportation And Healthcare Systems: A Simulation-Driven Framework Incorporating Social Equity And Facility Optimization, S. Yasaman Ahmadi

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

The overarching goal of this dissertation is to develop an integrated, simulation-driven framework to assess and enhance the resilience of interdependent transportation and healthcare systems before, during, and after natural hazards. By examining how spatial disruptions, social vulnerability, operational constraints, and infrastructure interdependencies affect access to and functionality of hospitals, this research offers a multifaceted evaluation of system performance under stress. This dissertation examines the impact of natural hazards, particularly floods, on the interdependent transportation and healthcare systems. The proposed approach combines and advances GIS-based network analysis, graph-theoretical modeling, and discrete-event simulation to evaluate system performance under different scenarios. The …

Modeling Disaster Resilience Through A Human-Centered Lens: Exposure, Vulnerability And Adaptation, Tong Liu

All Dissertations

The core of reframing and operationalizing disaster resilience with a human-centered lens is to incorporate concepts from socio-ecological resilience into engineering resilience to better understand the humans’ capability for disaster adaptation. Existing studies have drawn practical implications by identifying actionable thresholds for infrastructure systems under disasters, which can be easily applied by policymakers, emergency managers and municipal agencies. However, how individuals interact with, respond to, or adapt under these infrastructure thresholds remain understudied. This hinders the operationalization of disaster resilience at the human scale.

First, I examined exposure by analyzing how configuration and distribution of urban infrastructure systems, such as …

Groundwater Flooding On Highways In The Nebraska Sandhills: Applying Remote Sensing, Precipitation And Groundwater Modeling To Determine Depth, Cause And Frequency, Aaron R. Mittelstet

Nebraska Department of Transportation: Research Reports

Climate change significantly impacts infrastructure sustainability, particularly through shifts in precipitation patterns, intensity, and duration. These precipitation dynamics may increase the occurrence of surface water and groundwater flooding. Groundwater in the Nebraska Sand Hills (NSH), including the thickest portions of the High Plains Aquifer, extends close to the land surface in interdunal areas, making the NSH vulnerable to groundwater flooding. Recent events involving heavy precipitation, snow melt, and rising groundwater levels have caused prolonged highway flooding, disrupting transportation networks. This study estimates groundwater flood inundation depth, duration and frequency in the highways of NSH using remote sensing techniques and groundwater …

Enhanced Pavement Project Prioritization, Bryan Gibson, Jon Wilcoxson, Gayle Marks

Kentucky Transportation Center Research Report

The Kentucky Transportation Cabinet (KYTC) is responsible for inspecting, maintaining, and improving 27,000 centerline miles of pavement. Given the vastness of the state’s transportation network, KYTC needs a robust method for prioritizing pavement preservation projects. The Cabinet has relied on pavement condition ratings, data collected using Laser Crack Measurement Systems, and input from district-level staff to prioritize these types of projects. But this approach overlooks information that should be considered, such as factors related to safety, mobility, and geographic context. To resolve these shortcomings, Kentucky Transportation Center (KTC) researchers worked with KYTC subject-matter experts to develop the Enhanced Pavement Prioritization …

Balancing Infrastructure Demands: Analysis Of Materials Pricing And Supply, Bethany Paris, Ying Li, Steve Waddle, Bryan Gibson

Kentucky Transportation Center Research Report

The Kentucky Transportation Cabinet (KYTC) lets around 700 contracts year valued at over $1 billion. One of KYTC’s foremost goals is to deliver projects on time and on budget. However, over the past five years achieving these twin goals has grown in difficulty due to material shortages, widespread inflation, supply chain disruptions, and the tight labor market triggered by the COVID-19 pandemic. Although material shortages have abated and supply chain disruptions have eased, instability is seemingly a permanent feature of the national and global economies. As such, Cabinet decision makers need reliable tools that can be used to understand historical …

Stabilizing Embankments Using Geosynthetic Reinforcement, Daryl Greer, Charlie Sun

Kentucky Transportation Center Research Report

Reinforced soil slopes (RSSs) can be a feasible solution for embankments where there exist right of way re-strictions, environmental issues, rolling or mountainous topography, unfavorable geology, and other limiting fac-tors. They can be an alternative to retaining walls or importing select fills to construct steeper, stable embankment slopes where flatter embankment slopes may result in unwanted impacts, costs, and maintenance issues. Thisreport discusses the advantages and limitations of using geosynthetic reinforcement to construct RSSs. Researchers investigated current design, specification, and construction practices to determine which practices can be adopted by the Kentucky Transportation Cabinet (KYTC). Specifications were developed for using …

Effect Of Vehicular Electrification On Transportation Emissions In Florida, Shreya Sapkota Dhakal

Doctoral Dissertations and Master's Theses

Vehicular emissions from fuel-based passenger cars emit an array of gases and particles that are detrimental for human health and the environment. In that regard, electric vehicles (EVs) present a viable, sustainable solution. This study investigated the impact of electrification of passenger cars on air quality in Florida, in five major urban counties namely Miami-Dade, Duval, Hillsborough, Orange, and Leon. Between 2018 and 2022, these counties experienced a significant increase of 219.50 ± 52.32% in EV adoption, coupled with a 11.55 ± 6.13% decrease in fuel-based vehicle usage. Herein, we characterize five pollutants primarily generated from fuel-based passenger vehicles- carbon …

The Role Of Internal Factors On Vehicular Mobility, Aziz Mdimi

Tanzania Journal of Engineering and Technology (TJET)

Vehicle mobility internal factors are influenced by the performance state of the road surface quality, governor, engine, gear train, differential unit and mobility unit. Studies on vehicular mobility models exist for off-road external factors but absent on on-road internal factors. The on-road internal factors model describes the vehicular mobility performance as a function of internal factors. In the current undertaking, results are generated by the determination of mobility performance characteristics with the application of 2nd Order Ordinary Differential Equations and using Laplace operator with MATLAB Software simulation. The effect of road surface against the time taken varies accordingly. At a …

A Model Of Trips Route Planning To Improve The Accessibility Of Public Transportation In Bengkalis City Using Geographic Information System (Gis), Nur'ain Jaafar, Hendra Saputra, Mutia Lisya

CSID Journal of Infrastructure Development

The increase in population and motorized vehicles in Bengkalis City has led to greater demand for public transportation, which remains insufficient in meeting accessibility needs. This study aims to develop a model for planning public transportation routes using Geographic Information System (GIS) tools to improve accessibility in Bengkalis City. The study employs primary data from field surveys and secondary data from relevant agencies. GIS-based spatial analysis methods, such as service area analysis and the Origin-Destination (OD) matrix, are applied to evaluate accessibility and passenger movement patterns. The analysis results in two route alternatives assessed based on stop point density, community …

Study On Reasonable Parameters Of Natural Smoke Exhaust Shafts In Tunnels With Different Longitudinal Slopes, Yang Tao, Zeng Yuekai, Li Peijun, Ren Rui, Deng Min, Zhang Aoyu

Journal of China & Foreign Highway

To obtain the reasonable parameters of a smoke exhaust shaft in a tunnel under different longitudinal slope conditions,the temperature,flow velocity,and smoke exhaust efficiency of the tunnel were taken as indexes,and the numerical model was established by using fire dynamics simulator (FDS ) software to study the influence of the longitudinal slope of the tunnel,shaft width,and shaft length on the ventilation and smoke exhaust in case of a fire.The results show that under the longitudinal slope conditions,with the increase in the shaft width and length,the maximum temperature in the tunnel decreases,and the smoke exhaust efficiency of the shaft increases.However,the influence of …

Study On Salt Release Mechanism Of Self-Melting Ice Asphalt Mixture And Its Impact On Road Performance, Li Tao, Zhang Xiu ’Ang

Journal of China & Foreign Highway

To study the long-term salt release characteri stics of self-melting ice asphalt mixture and the impact of the complete salt release on pavement durability,an accelerated salt release method was developed using a Los Angeles abrasion tester.The salt release mechanism under varying asphalt types,deicing agent contents,and gradation types was revealed.The impact of the complete salt release on road performance was analyzed.Results show that the Los Angeles abrasion tester-based salt release method achieves 91 times and 114 times higher salt release efficiency than the magnetic stirrer and natural immersion methods,respectively.SBS-modified asphalt mixture exhibits a longer salt release duration.The salt release duration is …