Space Vehicles Commons^™

Optimization Of Spacecraft Formations About Lagrange Points For The Next Generation Space Weather Prediction Mission, Roberto Cuéllar Rangel

Doctoral Dissertations and Master's Theses

This thesis’s work serves as proof of concept for the Next Generation Space Weather Prediction Mission, a multi-spacecraft mission at various libration points whose objective is to forecast Space Weather hazards with a 12day warning time. This thesis deals with the design and control of orbits of spacecraft formations at different libration points. The systems studied are SunEarth, SunVenus, SunMercury, and SunMars. The orbit design and formation keeping control of the spacecraft are solved simultaneously using an optimization software called DIDO. Initial conditions are obtained through two different strategies. The first one, by placing the spacecraft in a tetrahedral formation …

Python Implementation Of Batch Least-Squares Filter For Satellite Orbit Determination, Austin Ogle

Doctoral Dissertations and Master's Theses

Accurate orbit determination techniques are fundamental to the maintenance and execution of any ongoing space-based mission. This project serves as a guide and demonstration of a batch sequential least-squares filter for Earth-orbiting satellites using exclusively open-source technologies. The target audience for this project was an academic institution aiming to keep track of an irregularly documented satellite. The observation function mimics a telescope, accepting right ascension and declination as measured values.

State propagation was handled using the Poliastro library. This package boasts FORTRANlevel speed by utilizing the DOPRI8 integrator, explicitly calling FORTRAN code. Matrix inversion was solved using the SciPy banded …

Development Of High-Density Propulsion System Technologies For Interplanetary Small Satellites And Cubesats, Morgan Andrew Roddy

Graduate Theses and Dissertations

The goal of this research was to support the development of a novel propulsion system for small satellites (<180 kg) and CubeSats. This was pursued by conducting a collection of studies that were designed to provide engineering data that would be critical in designing a functional prototype. The novel propulsion system was conceived by the author to provide best-in-class performance for the small satellite and CubeSat families of spacecraft. This context presents specific design requirements that the presented technology attempts to satisfy. The most critical among these is high density; the propellant was designed to be stored with high density and the thruster was designed to be as compact as possible. The propulsion system is composed of two primary elements, a propellant generator and a thruster. The propellant generator works by sublimating a solid crystal into vapor and then using this vapor to etch a dense metal. The resulting gaseous byproducts of this reaction are the propellant. This dissertation used xenon difluoride (XeF2) vapor to etch tungsten (W) which react to form xenon gas (Xe) and tungsten hexafluoride (WF6). This approach gave a theoretical propellant storage density 5.40 g/cm3; and 5.17 g/cm3 was demonstrated. The sublimation dynamics of the XeF2 were studied as a function of surface area and temperature and it was found to be suitable for the intended application due to its high effluence rate; that is, it sublimates fast enough to be useful. The sublimation rates are on the order of 10’s of µg/s. The etch rate of XeF2 on W was also studied and found to be suitably fast to provide useful amounts of reactants for use as a propellant, again on the order of 1’s of µg/s. The thruster is an electrostatic radio frequency (RF) ion thruster design and is manufactured with Low Temperature Co-Fired Ceramic (LTCC) materials system and manufacturing technology. Manufacturing samples of the thruster were built at the University of Arkansas in July 2015 and tested at NASA’s Marshall Space Flight Center in May 2018. Testing validated the viability of the LTCC thruster and provided valuable information on how to improve the thruster’s design.

Design, Validation, And Verification Of The Cal Poly Educational Cubesat Kit Structure, Nicholas B. Snyder

Master's Theses

In this thesis, the development of a structure for use in an educational CubeSat kit is explored. The potential uses of this kit include augmenting existing curricula with aspects of hands on learning, developing new ways of training students on proper space systems engineering practices, and overall contributing to academic capacity building at Cal Poly and its collaborators. The design improves on existing CubeSat kit structures by increasing accessibility to internal components by implementing a modular backplane system, as well as adding the ability to be environmentally tested. Manufacturing of the structure is completed with both additive (Fused Deposition Modeling …

Miniaturized Ultraviolet Imager Phase Iii, Bradley D. Albright, Nicolas A. Armenta, Colin W. Harrop

Mechanical Engineering

This document details the work to date, June 9, 2020, done by the Cal Poly Mechanical Engineering senior project team, Miniaturized Ultraviolet Imager: Phase III (MUVI III), sponsored by the University of California, Berkeley – Space Sciences Laboratory (UCB SSL). MUVI III is the third senior project team of an ongoing design, MUVI: the prototype of a 2U sized CubeSat intended to capture aurora images in the ionosphere. The first team, MUVI I, finished development of the UV imager. The second team, MUVI II, designed the mirror mounting and deployable door mechanisms. The goal of MUVI phase III is to …

Congressional Committee Resources On Space Policy During The 115th Congress (2017-2018): Providing Context And Insight Into Us Government Space Policy, Bert Chapman

Libraries Faculty and Staff Presentations

Article 1 of the US Constitution assigns the US Congress numerous responsibilities. These include creating new laws, revising existing laws, funding government programs, and conducting oversight of these programs' performance. Oversight of US Government agency space policy programs is executed by various congressional space policy committees including the House and Senate Science Committees, Armed Services, and Appropriations Committees. These committees conduct many public hearings on space policy, which invite expert witnesses to testify on US space policy programs and feature debate on the strengths and weaknesses of these programs. Documentation produced by these committees is widely available to the public, …

On The Advantages Of The Disabled In Space., Samantha R. Timmers

College of Arts & Sciences Senior Theses

Since the start of the astronaut program in the 1960s, candidates have had to prove to be in prime physical shape before being granted clearance to fly, whereas those with physical disabilities such as blindness or deafness are automatically disqualified. The stigma that disabled persons are less qualified to succeed in a physically alien environment has persisted, though little research exists in revisiting the difficulties posed by allowing this group into the space program. This paper aims to reconsider the advantages and disadvantages of a disability-friendly space program, to include cost considerations, potential challenges, and the unique benefits posed by …

Nonlinear Least Squares 3-D Geolocation Solutions Using Time Differences Of Arrival, Michael V. Bredemann

Mathematics & Statistics ETDs

This thesis uses a geometric approach to derive and solve nonlinear least squares minimization problems to geolocate a signal source in three dimensions using time differences of arrival at multiple sensor locations. There is no restriction on the maximum number of sensors used. Residual errors reach the numerical limits of machine precision. Symmetric sensor orientations are found that prevent closed form solutions of source locations lying within the null space. Maximum uncertainties in relative sensor positions and time difference of arrivals, required to locate a source within a maximum specified error, are found from these results. Examples illustrate potential requirements …

Constrained Motion Analysis And Control Of Spacecraft Asteroid Hovering With Formulation Extension In Geometric Mechanics Framework, Wesley Thomas Stackhouse

Doctoral Dissertations and Master's Theses

This thesis studies the constrained motion for a spacecraft hovering over an asteroid, where the Udwadia-Kalaba (UK) formulation is applied for nominal control, and an adaptive controller is developed to account for unknowns in the dynamics. Then, the formulation is extended in the geometric mechanics framework to account for rigid body spacecraft asteroid hovering. Constraints are developed and applied for fully constrained and under-constrained asteroid hovering. The fully constrained solutions provided by the UK fundamental equation are compared to an optimal linear quadratic regulator. An adaptive controller is designed using the UK fundamental equation as a basis in the form …

Dynamic And Control Of Air-Bearing Spacecraft Simulator, Jacob Joseph Korczyk

Doctoral Dissertations and Master's Theses

An air bearing is being designed as a spacecraft rotational motion simulator, featuring the Sawyer Robot and its control box. The objective is to maneuver the robot as desired, performing operations specific to on-orbit servicing operations while maintaining stability of the system. Before the control can be designed, the dynamics of the platform and the robot must be modeled. The dynamics of the robot can be derived utilizing a Newton-Euler recursive approach. By beginning with a simple pendulum, then adding links (degrees of freedom) to more closely resemble the Sawyer arm, the equations of motion for the robot can be …

Launch Vehicle Design For The Far-Mars Competition, Matthew Boban, Bryce Smoldon, Jonathan Noble, Stefan Johnson, Maxwell Kauker, Nicholas Wright, Andrew Lucka

Discovery Day - Prescott

Zenith Propulsion is constructing a launch vehicle, named Altair, to compete in a competition hosted by the Friends of Amateur Rocketry (FAR) and the Mars Society. The objective for Zenith Propulsion is to design, build and launch Altair to a qualifying altitude of 30,000 feet in the FAR-Mars competition. Altair will utilize a rocket engine that has been in development at Embry-Riddle Aeronautical University’s Prescott campus since late 2018. This engine, named Janus, uses liquid oxygen and Jet-A and is designed to deliver 1000 lbf of thrust. Altair will be launched from the FAR launch site, in Mojave, CA, on …

Space And Defense – Volume Eleven – Number One – Spring 2019, Space And Defense Journal

Space and Defense

No abstract provided.

Space And Defense – Volume Nine – Number One – Spring 2016, Space And Defense Journal

Space and Defense

No abstract provided.

Space And Defense – Volume Eight – Number One – Spring 2015, Space And Defense Journal

Space and Defense

No abstract provided.

Space And Defense – Volume Seven – Number One – Winter 2014, Space And Defense Journal

Space and Defense

No abstract provided.

Space And Defense – Volume Six – Number One – Fall 2012, Space And Defense Journal

Space and Defense

No abstract provided.

Space And Defense – Volume Five – Number One – Summer 2011, Space And Defense Journal

Space and Defense

No abstract provided.

Space And Defense – Volume Four – Number Two – Summer 2010, Space And Defense Journal

Space and Defense

No abstract provided.

Space And Defense – Volume Four – Number One – Winter 2010, Space And Defense Journal

Space and Defense

No abstract provided.

Space And Defense – Volume Three – Number Two – Fall 2009, Space And Defense Journal

Space and Defense

No abstract provided.

Space And Defense – Volume Three – Number One – Summer 2009, Space And Defense Journal

Space and Defense

No abstract provided.

Space And Defense – Volume Two – Number Three – Winter 2009, Space And Defense Journal

Space and Defense

No abstract provided.

Space And Defense – Volume Two – Number Two – Winter 2008, Space And Defense Journal

Space and Defense

No abstract provided.

Space And Defense – Volume Two – Number One – Winter 2008, Space And Defense Journal

Space and Defense

No abstract provided.

Investigation Of Ultem 9085 For Use In Printed Orbital Structures, William R. Gallagher

Theses and Dissertations

Additive manufacturing is revolutionizing industries ranging from medicine to space. However, the structural characteristics of plastic parts created by these methods are not as well understood as their more established counterparts. This research explored two relevant areas: how the structural characteristics of ULTEM 9085 plastic behaved after exposure to orbital conditions and the design of the cross-sectional area of a beam to be 3-D printed in microgravity based on the expected loads from the printer. To study orbital effects, ULTEM 9085 was printed into 1/4th scale ASTM D638- 14 dogbones using a Stratasys 450mc printer. These dogbones were placed in …

Space And Defense – Volume One – Number One – Fall 2006, Space And Defense Journal

Space and Defense

No abstract provided.

Congressional Committee Resources On Space Policy During The 115th Congress (2017-2018): Providing Context And Insight Into U.S. Government Space Policy, Bert Chapman

Libraries Faculty and Staff Scholarship and Research

Article 1 of the US Constitution assigns the US Congress numerous responsibilities. These include creating new laws, revising existing laws, funding government programs, and conducting oversight of these programs' performance. Oversight of US Government agency space policy programs is executed by various congressional space policy committees, including the House and Senate Science Committees, Armed Services, and Appropriations Committees. These committees conduct many public hearings on space policy which invite witnesses to testify on US space policy programs and feature debate on the strengths and weaknesses of these programs. Documentation produced by these committees is widely available to the public, except …

The Impact Of Human Assurance On Satellite Operations, Holly Handley, Dan Heimerdinger, Unal Tatar (Ed.), Adrian V. Gheorghe (Ed.), Omer F. Keskin (Ed.), Jean Muylaert (Ed.)

Engineering Management & Systems Engineering Faculty Publications

Mission assurance is a method to guarantee mission success against a known set of risks; mission assurance is generally represented as a probability against a threshold of acceptable performance. Human assurance can be considered as the likelihood of acceptable operator performance given a set of conditions that include the operator, the system, and the environment. Standard mission assurance models tend to assume a qualified crew, but do not include other aspects of the internal or external environment that may impact the reliability of the human operator. A human assurance model can be created that allows the exploration of the variability …

Inertial Orbit Estimation Using Multiple Space Based Observers: A New Measurement Model, James Hippelheuser

Electronic Theses and Dissertations, 2020-2023

Presented within this work is a new method for inertial orbit estimation of an object, either known or unknown, adaptable to a network of low-cost observation satellites. The observation satellites would only require a monocular camera for line of sight measurements. Using the line of sight measurements of each observer, a pair of orthogonal geometric planes that intersect both the observation satellite and the target are created. The intersection of the two planes in the inertial frame defines the new measurement model that is implemented with multiple observation nodes. Total system observability is analyzed and the instantaneous (per node) observability …

Piezospectroscopic Sensing Systems - Multi-Scale And In-Situ Sensing Technology For Structural Integrity, Remelisa Esteves

Electronic Theses and Dissertations, 2020-2023

The aerospace industry relies on nondestructive evaluation (NDE) to ensure aircraft safety and will benefit from methods that allow for early damage detection. Photoluminescence piezospectroscopy (PS) has demonstrated stress and damage sensing of substrates when coupled with alpha-alumina nanoparticles in a polymer matrix applied as a sensor coating. Alpha phase alumina exhibits photoluminescent spectral emission lines (R-lines) that shift due to changes in the stress state of the alumina. The coatings' capability for sensing early subsurface damage suggests the potential for implementing stress sensing paint for integrity monitoring of aircraft structures. To achieve a viable stress sensing coating that can …