Navigation, Guidance, Control and Dynamics Commons^™

High Frequency Magnetic Field Direction Finding Using Mgl-S8a B-Dot Sensors, Michael D. Archer

Theses and Dissertations

Aircraft based direction finding (DF) in the high frequency (HF) band is difficult due to the aircraft's size with respect to wavelength and limited azimuthal resolution. A B-dot sensor is useful for detection of the time varying magnetic field and offers improved integration into an aircraft. What the B-dot sensor gains in integration it gives up in sensitivity because it is designed for frequencies above 5 GHz. Design of an airborne HFDF array using Bdot sensors is based in maximizing the physical extent of the array and eliminating multiple main beams. The goals of this research are to complete a …

Real-Time Heading Estimation Using Perspective Features, James W. Dean

Theses and Dissertations

There are a large number of commercially available quad-rotor helicopters available from various manufacturers. All of these systems rely on a low cost MEMS based inertial measurement system for stabilization and navigation. These low cost inertial systems are all subject to rapid error growth in their attitude and position estimates unless bounded by external measurements. This thesis created real-time algorithm to integrate measurements from visual cues with measurements from onboard sensors to estimate the attitude position and velocity of a quad-rotor helicopter in a local navigation frame, a system model for the ARDrone, and a feed-back controller for the vehicle's …

Information Encoding On A Pseudo Random Noise Radar Waveform, Joshua A . Hardin

Theses and Dissertations

Navigation requires knowledge of current location and a planned destination. This is true with manned vehicles and unmanned vehicles. There are many ways to acquire the current location, including global positioning system (GPS), triangulation, radar, and dead reckoning. Today GPS is the most reliable and accurate navigation technique when there is a clear, unobstructed view of the satellite constellation. Various sensors can be used to perform indoor navigation; however, when the vehicle is autonomous the sensors need to provide the exact location to the system. This research determined if using a template replay strategy has the same RNR performance as …

Inertial Navigation System Aiding Using Vision, James O. Quarmyne

Theses and Dissertations

The aiding of an INS using measurements over time of the line of sight of ground features as they come into view of an onboard camera is investigated. The objective is to quantify the reduction in the navigation states' errors by using bearings-only measurements over time of terrain features in the aircraft's field of view. INS aiding is achieved through the use of a Kalman Filter. The design of the Kalman Filter is presented and it is shown that during a long range, wings level cruising flight at constant velocity and altitude, a 90% reduction in the aided INS-calculated navigation …

Implementing A Matlab Based Attitude Determination Algorithm In C Within The Polysat Software Architecture, Dominic Bertolino

Computer Engineering

This project focuses on one component within a complete attitude determination and control system (ADCS) for a small satellite. The component consists of porting the algorithm that determines the current attitude of the satellite developed by AERO students / team members. The original algorithm has been developed in MATLAB code. The actual algorithm will be simulated and tested in MATLAB by the AEROs. The porting consisted of integrating the pieces into the custom PolySat software environment in C. Testing was done to verify the ported component corresponded to the original MATLAB component as well as verify its runtime on the …

A Gravity Gradient, Momentum-Biased Attitude Control System For A Cubesat, Ryan J. Sellers

Master's Theses

ExoCube is the latest National Science Foundation (NSF) funded space weather CubeSat and is a collaboration between PolySat, Scientific Solutions Inc. (SSI), the University of Wisconsin, NASA Goddard and SRI International. The 3U will carry a mass spectrometer sensor suite, EXOS, in to low earth orbit (LEO) to measure neutral and ionized particles in the exosphere and thermosphere. Measurements of neutral and ion particles are directly impacted by the angle at which they enter EXOS and which leads to pointing requirements. A combination of a gravity gradient system with a momentum bias wheel is proposed to meet pointing requirements while …

Robust Parafoil Terminal Guidance Using Massively Parallel Processing, Jonathan Rogers, Nathan Slegers

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Terminal guidance of autonomous parafoils is a difficult problem in which wind uncertainty and system underactuation are major challenges. Existing strategies almost exclusively use impact error as the criterion for optimality. Practical airdrop systems, however, must also include other criteria that maybe even more important than impact error for some missions, such as ground speed at impact or constraints imposed by drop zones with restrictions on flight patterns. Furthermore, existing guidance schemes determine terminal trajectories using deterministic wind information and may result in a solution that works in ideal wind but may be sensitive to variations. The work described here …

Indeterminate Masses, Elements And Models In Information Fusion, Florentin Smarandache

Branch Mathematics and Statistics Faculty and Staff Publications

In this paper at the beginning, we make a short history of the logics, from the classical Boolean logic to the most general logic of today neutrosophic logic. We define the general logic space and give the definition of the neutrosophic logic. Then we introduce the indeterminate models in information fusion, which are due either to the existence of some indeterminate elements in the fusion space or to some indeterminate masses.

The best approach for dealing with such models is the neutrosophic logic, which is part of neutrosophy. Neutrosophic logic is connected with neutrosophic set and neutrosophic probability and statistics.

Unmanned Autonomous Object Retrieval: Old Dominion University 2013 International Aerial Robotics Competition Entry, Johnathan Bailey, Austin Boyd, Chung-Hao Chen, Stephen Dailey, Lisa Henderson, Jeremy Stuart, Christina Williams

Electrical & Computer Engineering Faculty Publications

This paper describes the design implementation of a Quadrotor Unmanned Aerial Vehicle (UAV) with the capability of exploring indoor locations without the assistance of external aids. For relative position, the use of a laser range sensor, an optical flow sensor, and sonar sensor combined allows for the vehicle to generate mapping information. With relative position in mind, the vehicle uses vision algorithms to recognize immediate obstacles, sign, and entry ways to allow for quick movement responses and object recognition. A proportional-integral-differentiator controller allows for flight stability and mitigation in the tight confines of the indoor spaces. A mapping algorithm allows …

An Attitude Determination System With Mems Gyroscope Drift Compensation For Small Satellites, Maxwell Bezold

Theses and Dissertations--Electrical and Computer Engineering

This thesis presents the design of an attitude determination system for small satellites that automatically corrects for attitude drift. Existing attitude determination systems suffer from attitude drift due to the integration of noisy rate gyro sensors used to measure the change in attitude. This attitude drift leads to a gradual loss in attitude knowledge, as error between the estimated attitude and the actual attitude increases.

In this thesis a Kalman filter is used to complete sensor fusion which combines sensor observations with a projected attitude based on the dynamics of the satellite. The system proposed in this thesis also utilizes …

Visual Attitude Propagation For Small Satellites, Samir Ahmed Rawashdeh

Theses and Dissertations--Electrical and Computer Engineering

As electronics become smaller and more capable, it has become possible to conduct meaningful and sophisticated satellite missions in a small form factor. However, the capability of small satellites and the range of possible applications are limited by the capabilities of several technologies, including attitude determination and control systems. This dissertation evaluates the use of image-based visual attitude propagation as a compliment or alternative to other attitude determination technologies that are suitable for miniature satellites. The concept lies in using miniature cameras to track image features across frames and extracting the underlying rotation.

The problem of visual attitude propagation as …

Dynamics And Control Of Higher-Order Nonholonomic Systems, Jaime Rubio HerváS

Doctoral Dissertations and Master's Theses

A theoretical framework is established for the control of higher-order nonholonomic systems, defined as systems that satisfy higher-order nonintegrable constraints. A model for such systems is developed in terms of differential-algebraic equations defined on a higher-order tangent bundle. A number of control-theoretic properties such as nonintegrability, controllability, and stabilizability are presented. Higher-order nonholonomic systems are shown to be strongly accessible and, under certain conditions, small time locally controllable at any equilibrium. There are important examples of higher-order nonholonomic systems that are asymptotically stabilizable via smooth feedback, including space vehicles with multiple slosh modes and Prismatic-Prismatic-Revolute (PPR) robots moving open liquid …

Radar Based Navigation In Unknown Terrain, Kyle J. Kauffman

Theses and Dissertations

There is a great need to develop non-GPS based methods for positioning and navigation in situations where GPS is not available. This research focuses on the development of an Ultra-Wideband Orthogonal Frequency Division Multiplexed (UWB-OFDM) radar as a navigation sensor in GPS-denied environments. A side-looking vehicle-fixed UWB-OFDM radar is mounted to a ground or aerial vehicle continuously collecting data. A set of signal processing algorithms and methods are developed which use the raw radar data to aide in calculating the vehicle position and velocity via a simultaneous localization and mapping (SLAM) approach. The radar processing algorithms detect strong, persistent, and …

Determination Of Human Powered Helicopter Stability Characteristics Using Multi-Body System Simulation Techniques, Sean M. Brown

Master's Theses

Multi-Body System Simulation combined with System Identification was developed as a method for determining the stability characteristics of a human powered helicopter(HPH) configurations. HPH stability remains a key component for meeting competition requirements, but has not been properly treated. Traditional helicopter dynamic analysis is not suited to the HPH due to its low rotation speeds and light weight. Multi-Body System Simulation is able to generate dynamic response data for any HPH configuration. System identification and linear stability theory are used to determine the stability characteristics from the dynamic response. This thesis focuses on the method development and doesn't present any …

Three-Axis Stabilized Earth Orbiting Spacecraft Simulator, Alan F. Ma, Nikola N. Dominikovic

Aerospace Engineering

This report details the method and results of the program created for simulating an Earth orbiting spacecraft with control actuators and orbital perturbations. The control actuators modeled are reaction thrusters, reaction/momentum wheels, and control moment gyros (CMG). The perturbations modeled were gravity gradient, electromagnetic torques, solar radiation pressure, gravity gradients, third-body effects, Earth oblateness and atmospheric drag. This simulation allows for satellite control in all 6 degrees of freedom for any Earth orbiting spacecraft. Assumptions include rigid body dynamics, no sensor noise, constant spacecraft cross-sectional area, constant coefficient of drag and reflectivity, ignoring the effects due to the moon, moment …

Control System Development For Small Uav Gimbal, Nicholas J. Brake

Master's Theses

The design process of unmanned ISR systems has typically driven in the direction of increasing system mass to increase stabilization performance and imagery quality. However, through the use of new sensor and processor technology high performance stabilization feedback is being made available for control on new small and low mass stabilized platforms that can be placed on small UAVs. This project develops and implements a LOS stabilization controller design, typically seen on larger gimbals, onto a new small stabilized gimbal, the Tigereye, and demonstrates the application on several small UAV aircraft. The Tigereye gimbal is a new 2lb, 2-axis, gimbal …

A Multi-Objective Differential Evolution Algorithm For Engineering Design Optimization, Shantanu S. Muluk

Mechanical & Aerospace Engineering Theses & Dissertations

The current research investigation focuses on the development of a multi-objective global optimizer based on the differential evolution algorithm. A rotationally invariant version of the original differential evolution algorithm is adopted as the core component of the optimization procedure. The optimizer is applied to a number of multi-objective problems: constrained problems, problems of high dimensionality, and problems with non-convex Pareto fronts.

The effectiveness of the proposed optimization framework in real engineering design problems is demonstrated by carrying out an aerodynamic shape optimization of wind turbine airfoils. The investigation focuses on both thin and thick airfoils. The produced Pareto-optimal airfoil shapes …

Comprehensive Matlab Gui For Determining Barycentric Orbital Trajectories, Steve Katzman

Aerospace Engineering

When a 3-body gravitational system is modeled using a rotating coordinate frame, interesting applications become apparent. This frame, otherwise known as a barycentric coordinate system, rotates about the system’s center of mass. Five unique points known as Lagrange points rotate with the system and have numerous applications for spacecraft operations. The goal of the Matlab GUI was to allow easy manipulation of trajectories in a barycentric coordinate system to achieve one of two end goals: a free-return trajectory or a Lagrange point rendezvous. Through graphical user input and an iterative solver, the GUI is capable of calculating and optimizing both …

Development Of A Pyrotechnic Shock Simulation Apparatus For Spacecraft Applications, Joseph Binder, Matthew Mccarty, Chris Rasmussen

Aerospace Engineering

This report details the research, design, construction, and testing of a pyrotechnic shock simulation apparatus for spacecraft applications. The apparatus was developed to be used in the Space Environments Lab at California Polytechnic State University. It will be used for testing spacecraft components with dimensions up to 24”x12”x12” as well as CubeSats. Additionally, it may be used as an instructional or demonstrational tool in the Aerospace Department’s space environments course. The apparatus functions by way of mechanical impact of an approximately 20 lb stainless steel swinging hammer. Tests were performed to verify the simulator’s functionality. Suggestions for improvement and further …

Empennage Sizing And Aircraft Stability Using Matlab, Ryan C. Struett

Aerospace Engineering

No abstract provided.

Flying Qualities Built-In-Test For Unmanned Aerial Systems, Alton Pak-Hin Chiu

Master's Theses

This paper presents a flying qualities built-in-test for UAS application with the scope limited to the longitudinal axis. A doublet input waveform excites the AV and both α and q are used by EUDKF to estimate the A and B matrices which are short period approximations of the system. ζ, ω, GM, PM, observability, and controllability are calculated to determine flying qualities with the results displayed to the AVO in a color-coded, easy to interpret display.

While SID algorithms have been flying in vehicles with adaptive control schemes, vehicles with other schemes (such as classical feedback) lack this built-in self …

Sun-Synchronous Orbit Slot Architecture Analysis And Development, Eric Watson

Master's Theses

Space debris growth and an influx in space traffic will create a need for increased space traffic management. Due to orbital population density and likely future growth, the implementation of a slot architecture to Sun-synchronous orbit is considered in order to mitigate conjunctions among active satellites. This paper furthers work done in Sun-synchronous orbit slot architecture design and focuses on two main aspects. First, an in-depth relative motion analysis of satellites with respect to their assigned slots is presented. Then, a method for developing a slot architecture from a specific set of user defined inputs is derived.

Satellite Relative Motion Control For Mit's Spheres Program, Samuel P. Barbaro

Theses and Dissertations

Autonomous formation flight concepts and algorithms have great potential to revolutionize spacecraft operations enabling missions to perform autonomous docking, in-space refueling, in-space robotic assembly, and space debris removal. Such tasks require the implementation of speed and path control algorithms to maneuver satellites along relative paths with specified rates along those paths. This thesis uses MATLAB® and SIMULINK® to design and simulate a control algorithm capable of providing relative speed and path control between satellites with a pointing error of less than two degrees, a position error of less than two millimeters, and a millimeter per second of velocity error. The …

Hybrid Solution Of Stochastic Optimal Control Problems Using Gauss Pseudospectral Method And Generalized Polynomial Chaos Algorithms, Gerald C. Cottrill

Theses and Dissertations

Two numerical methods, Gauss Pseudospectral Method and Generalized Polynomial Chaos Algorithm, were combined to form a hybrid algorithm for solving nonlinear optimal control and optimal path planning problems with uncertain parameters. The algorithm was applied to two concept demonstration problems: a nonlinear optimal control problem with multiplicative uncertain elements and a mission planning problem sponsored by USSTRATCOM. The mission planning scenario was constructed to find the path that minimizes the probability of being killed by lethal threats whose locations are uncertain to statistically quantify the effects those uncertainties have on the flight path solution, and to use the statistical properties …

Integration Of Cold Atom Interferometry Ins With Other Sensors, Aaron J. Canciani

Theses and Dissertations

Inertial navigation systems (INS) using cold-atom interferometry are currently under development, and sensors in these systems are expected to be several orders of magnitude more ccurate than current navigation grade sensors. This signi cant increase in accuracy motivates the need to explore how these high accuracy inertial navigation systems can be integrated with other sensors. This research focuses on methods of integrating cold atom interferometry INS with conventional navigation grade INS, as well as with GPS. Results from a full 6 degree of freedom simulation show that integrating CAI INS with navigation grade INS is a successful way to address …

Enhanced Image-Aided Navigation Algorithm With Automatic Calibration And Affine Distortion Prediction, Juan D. Jurado

Theses and Dissertations

This research aims at improving two key steps within the image aided navigation process: camera calibration and landmark tracking. The camera calibration step is improved by automating the point correspondence calculation within the standard camera calibration algorithm, thereby reducing the required time for calibration while maintaining the output model accuracy. The feature landmark tracking step is improved by digitally simulating affine distortions on input images in order to calculate more accurate feature descriptors for improved feature matching in high relative viewpoint change. These techniques are experimentally demonstrated in an outdoor environment with a consumer-grade inertial sensor and three imaging sensors, …

Nonlinear Uav Flight Control Using Command Filtered Backstepping, Brian M. Borra

Master's Theses

The aim of this effort is to implement a nonlinear flight control architecture, specifically flight path control via command filtered backstepping, for use in AME UAS's Fury® 1500 unmanned flying wing aircraft. Backstepping is a recursive, control-effort minimizing, constructive design procedure that interlaces the choice of a Lyapunov function with the design of feedback control. It allows the use of certain plant states to act as intermediate, virtual controls, for others breaking complex high order systems into a sequence of simpler lower-order design tasks.

Work herein is a simplified implementation based on publications by Farrell, Sharma, and Polycarpou. Online approximation …

Specialized System Identification For Parafoil And Payload Systems, Michael Ward, Mark Costello, Nathan Slegers

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

There are a number of peculiar aspects to parafoil and payload systems that make it difficult to apply conventional system identification procedures used for aerospace systems. Parafoil and payload systems are unique because typically there is very little sensor information available, the sensors that are available are separated from the canopy by a complex network of flexible rigging, the systems are very sensitive to wind and turbulence, the systems exhibit a number of nonlinear behaviors, and the systems exhibit a high degree of variability from flight to flight. The current work describes a robust system identification procedure developed to address …

Evaluation Of Multibody Parafoil Dynamics Using Distributed Miniature Wireless Sensors, Chrystine M. Gorman, Nathan Slegers

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Guided parafoils arc composed of two primary bodies, a payload and parafoil. The payload encompasses the majority ofthe ovcrdll system mass; however, the parafoil generates the majority of aerodynamic loads and is the sole source of control. Despite the canopy being the source of control, the sensor systems used for guidance are located away from the parafoil. Many multi body models exist in literature and use different degrees of freedom to represent parafoil-payload relative motion. However, in many cases, simulations are used to investigate how the relative motion between bodies affects the overall dynamics without experimental validation determining the accuracy …

Object Retrieval From Secure Unknown Interior Spaces Using Autonomous Unmanned Aerial Vehicles, John Levous, Julie Hoven, Victor Habgood, Abdulrahman Alotaibi, Brandon Ordway, Garibe Mohammed-Jones, Haole Guo, Filip Cuckov, Chung-Hao Chen

Electrical & Computer Engineering Faculty Publications

This paper describes an autonomous unmanned aerial vehicle (UAV) designed to participate in the 23rd annual International Aerial Robotics Competition. The UAV is equipped with onboard sensors and a Harvard architecture 8-bit RISC microcontroller to monitor and locally control its flight telemetry. Additional sensors (and an additional microcontroller) are used for detecting and mapping of structural and environmental objects while the UAV is in flight. The microcontrollers are interfaced with wireless communication modules for transmitting flight telemetry and structural/environmental data to a ground control station that sends the UAV command and control signals required for the mission objectives. The UAV …