Chemical Engineering Commons^™

Efficient Phosphate Removal From Water Using Ductile Cast Iron Waste: A Response Surface Methodology Approach, Mai Hassan Roushdy Dr., Nada Amr El-Khashab Eng,, Ahmed Ibrahim Osman Dr., Dalia Amer Ali Dr.

Chemical Engineering

Water scarcity is a critical issue worldwide. This study explores a novel method for addressing this issue by using ductile cast iron (DCI) solid waste as an adsorbent for phosphate ions, supporting the circular economy in water remediation. The solid waste was characterized using XRD, XRF, FTIR, and particle size distribution. Wastewater samples of different phosphate ion concentrations are prepared, and the solid waste is used as an adsorbent to adsorb phosphate ions using different adsorbent doses and process time. The removal percentage is attained through spectrophotometer analysis and experimental results are optimized to get the optimum conditions using Design …

Efficient Phosphate Removal From Water Using Ductile Cast Iron Waste: A Response Surface Methodology Approach, Mai Hassan Dr., Nada Alkhashab Eng., Ahmed Osman Dr., Dalia A. Ali Eng

Chemical Engineering

Water scarcity is a critical issue worldwide. This study explores a novel method for addressing this issue by using ductile cast iron (DCI) solid waste as an adsorbent for phosphate ions, supporting the circular economy in water remediation. The solid waste was characterized using XRD, XRF, FTIR, and particle size distribution. Wastewater samples of different phosphate ion concentrations are prepared, and the solid waste is used as an adsorbent to adsorb phosphate ions using different adsorbent doses and process time. The removal percentage is attained through spectrophotometer analysis and experimental results are optimized to get the optimum conditions using Design …

Rational Catalyst Synthesis For Sustainable Energy Applications, Alaba Upe Ojo

Theses and Dissertations

Energy accounts for two-thirds of the global climate challenges. Effective utilization of green hydrogen or finding cleaner ways to improve energy generation is necessary to combat climate crisis and allow for a more sustainable future. This work evaluates three heterogeneous catalytic processes which contribute to a sustainable future. In chapter 2, we studied the hydrogenation of toluene to methylcyclohexane; a reaction that can potentially serve as a medium for hydrogen storage and help to overcome the safety challenges of transporting gaseous hydrogen. We found that palladium catalysts on certain carbons exhibited significantly enhanced toluene hydrogenation rates compared to activated carbons …

The Undergraduate Engineering Mental Health Help-Seeking Instrument (Ue-Mh-Hsi): Development And Validity Evidence, Joseph H. Hammer, Courtney J. Wright, Melanie E. Miller, Sarah A. Wilson

Chemical and Materials Engineering Faculty Publications

Background: Undergraduate engineering students experiencing distress are less likely than peers to ask for professional help. A population-specific instrument to facilitate the identification of factors that influence mental healthcare utilization could guide development and testing of interventions to increase help seeking.

Purpose: We used mixed methods guided by the Integrated Behavioral Model (IBM) to develop and evaluate the Undergraduate Engineering Mental Health Help-Seeking Instrument (UE-MH-HSI).

Method: First, we adapted existing measures of mental health help-seeking intention and mechanisms (i.e., attitudes, perceived norm: injunctive, perceived norm: descriptive, personal agency: autonomy, personal agency: capacity). Second, we coded qualitative interviews (N = 33) …

Solubility Characterization Of Organic Molecules For Aqueous Organic Redox Flow Batteries, Anthony W. Ferrell, Harkeerith K. Vij, Seamus D. Jones

College of Engineering Summer Undergraduate Research Program

The major obstacle to renewable energy sources is a lack of long-term energy storage capabilities. Energy produced during the day dissipates, leaving insufficient electricity for at night. The goal of the project is to design an Aqueous Organic Redox Flow Battery (AORFB) to act as long-term energy storage. Work has been done using machine learning to identify suitable compounds for the batteries. In this work there was no indication as to the aqueous solubility of the molecules; this controls the device’s energy storage capabilities. We used a machine learning model to determine the aqueous solubility of slightly more than 3000 …

Carbon Fiber And Carbon Fiber Composites—Creating Defects For Superior Material Properties, Ashis Sutradhar Nitai, Tonny Chowdhury, Md Nafis Inam, Md Saifur Rahman, Md Ibrahim H. Mondal, M. A.H. Johir, Volker Hessel, Islam Md Rizwanul Fattah, Md Abul Kalam, Wafa Ali Suwaileh, John L. Zhou, Masoumeh Zargar, Mohammad Boshir Ahmed

Research outputs 2022 to 2026

Recent years have seen a rise in the use of carbon fiber (CF) and its composite applications in several high-tech industries, such as the design of biomedical sensor components, 3D virtual process networks in automotive and aerospace parts, and artificial materials or electrodes for energy storage batteries. Since pristine CF have limited properties, their properties are often modified through a range of technologies, such as laser surface treatment, electron-beam irradiation grafting, plasma or chemical treatments, electrophoretic deposition, carbonization, spinning-solution or melt, electrospinning, and sol–gel, to greatly improve their properties and performance. These procedures cause faulty structures to emerge in CF. …

Operational And Design Factors In Air Staging And Their Effects On Fouling From Biomass Combustion, Akram Elsebaie, Mingming Zhu, Yasir M. Al-Abdeli

Research outputs 2022 to 2026

The global transition towards a carbon-neutral economy highlights the potential of biomass as a renewable fuel source. However, the sustainability of biomass energy systems is challenged by its complex fouling behaviours during combustion. This study investigates the impact of air staging on mitigating fouling in biomass combustion. By optimising the secondary-to-total air flowrate ratio (Qs/Qt) and the positioning of secondary air, this research investigates the impact of operational and design parameters on fouling deposits in biomass combustion. A fixed-bed combustor was used for the experiments, with hardwood pellets as fuel. This study employed TGA and SEM to analyse the fouling …

Production Of Lioh·H2o From Lithium Chloride By Electrodialysis And Crystallisation, Kwang Loon Ang, Maryam Barmi, Yasaman Boroumand, Amir Razmjou, Aleksandar N. Nikoloski

Research outputs 2022 to 2026

Laboratory bench scale experiments were performed to develop a process for electrodialysis (ED) of LiCl liquor from spodumene leaching and purification to produce LiOH solution, for subsequent conversion by evaporative crystallisation to LiOH·H2O crystals as the end-product. Nafion® 117 cation-selective membranes were used in all experiments. The small electrolytic test cell achieved an average LiOH production rate of 7.5 g/h with 83 % coulombic efficiency and specific electrical consumption of 6.5 kWh/kg LiOH. In the large electrolytic test cell, a higher average LiOH production rate of 11.2 g/h was attained but at lower coulombic efficiency (62 %) and greater specific …

An Overview Of Additively Manufactured Metal Matrix Composites: Preparation, Performance, And Challenge, Liang Yu Chen, Peng Qin, Lina Zhang, Lai Chang Zhang

Research outputs 2022 to 2026

Highlight Recent progresses in additive manufacturing on metal matrix composites are reviewed. Additive manufacturing technologies for metal matrix composites are summarized. The characteristics of feedstocks and reinforcements are introduced. Mechanical property of additively manufactured metal matrix composites is reviewed. Challenges of additively manufactured metal matrix composites are discussed.

Harnessing The Power Of Hollow Zein Nanoparticles For Enhanced Antifouling And Heavy Metal Removal Of Polyethersulfone Membranes, Farzan Esmali, Mohadeseh Najafi Arani, Elsie Betmoushoul, Masoumeh Zargar, Khalil Farhadi, Vahid Javan Kouzegaran, Rahim Molaei, Yaghoub Mansourpanah

Research outputs 2022 to 2026

This study explores the physicochemical characteristics of an innovative mixed matrix membrane made from polyethersulfone (PES) and hollow Zein nanoparticles (HZNs), which are derived from the corn storage protein, Zein. HZNs, with a mean diameter of 40 nm, were applied to address the challenges associated with metal and inorganic nanoparticles, such as their tendency to accumulate unevenly on the membrane surface. The membranes were fabricated by incorporating varying concentrations of HZNs into the PES casting solution through the nonsolvent phase separation method. The addition of HZNs enhanced the hydrophilicity and pure water flux of the membranes. It also modified the …

Carboxymethyl Cellulose-Based Preformed Particle Gels For Water Management In Oil And Gas Reservoirs, Ahmed Ben Ali, Ahmed Hamza, Abdulaziz A. Almakimi, Mohammed Saad, Ibnelwaleed A. Hussein, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Carboxymethyl cellulose (CMC) based materials have been proposed as preformed particle gels (PPGs) for reducing excessive water production in oil and gas reservoirs. Multi-sized dry particles ranging between 100 and 1180 μm have been synthesized using microwave-assisted grafting copolymerization of CMC and acrylamide (AM)/n,n''-methylene-bisacrylamide (MBA). FTIR and SEM confirmed CMC crosslinked polyacrylamide's chemical structure and morphology (CMC/CPAM). Thermo-gravimetric analysis has demonstrated the thermal stability of dry PPGs up to 309 °C. CMC/CPAM showed slightly high absorbency in brine 2 (TDS = 67.3 g/L) compared to brine 1 (TDS = 33.65 g/L), 1% NaCl, and deionized water, with swelling ratios (SR) …

Design And Application Of Redox-Mediated Flow Electrode Electrodialysis For Ion Removal And Recovery, Rongxuan Xie

Theses and Dissertations

To meet the growing demand for freshwater driven by population growth and rising living standards, the first desalination plants were established in the late 1950s. As energy costs have risen over time, research has increasingly focused on reducing the overall cost of water treatment. Electrodialysis (ED), which facilitates the migration of anions and cations across ion exchange membranes under the influence of an electric field, has gained significant attention as a treatment method for saline water and brine due to its simplicity, low cost, and scalability. However, its traditional batch operation mode and the potential for generating flammable gases have …

Feasibility Study Of Perovskite Solid Electrolyte For Electrochemical Lithium-Ion Cells, Danyi Sun

Theses and Dissertations

To achieve a high energy density in lithium-ion batteries (LIB), replacing the graphite anode with lithium metal is essential, as it offers a theoretical capacity of 3840 mAh/g.(Q. Wang et al. 2021) However, the use of lithium metal anodes is restricted by the formation of lithium dendrites, which can cause short circuits.(Wood et al. 2016) Solid-state electrolytes present a viable alternative to conventional liquid electrolytes by potentially mitigating dendrite growth. Among these, the perovskite-type Li3/8Sr7/16Ta3/4Zr1/4O3 (LSTH) stands out due to its excellent ambient stability, although its synthesis, properties, and applications remain underexplored.(Y. Li et al. 2018) In this study, I …

Electroless Deposition And Galvanic Displacement For The Control Of Supported Nanoparticle Size And Composition, Haiying Zhou

Theses and Dissertations

Catalyst performances can be greatly affected by properties such as particle size, composition, geometry, and cleanliness of the active surface. To achieve optimal catalytic performance, appropriate synthesis methods are required to synthesize the desired structures. Supported metal particle catalysts are usually prepared by impregnation and precipitation methods in industry. Although these two methods are simple, they exhibit poor control over surface morphology, leading to a wide particle size distribution and uncontrolled distribution of different metal components. In this dissertation, three topics on controlling surface morphology are discussed.

For structure sensitive reactions, reactivity and selectivity can be strongly affected by particle …

A Systems Biology Approach To Predict Phenotypes From Genotypes For Plants And Bacteria, Niaz Bahar Chowdhury

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

Predicting phenotypes from genotypes is a central challenge in systems biology in understanding how organisms respond to environmental and genetic changes. To address this, genome-scale metabolic models (GSMs) integrated with omics data and machine learning provide a comprehensive framework to connect genotype to phenotype. This dissertation utilizes these approaches in plants and bacterial systems, revealing key metabolic adaptations. In maize, a root-specific GSM reveals metabolic reprogramming under nitrogen stress, offering strategies for improving stress tolerance. Building on this, a multi-organ maize GSM of temperature stress identifies metabolic bottlenecks, providing targets to enhance crop resilience. Similarly, in rice, a grain-specific GSM …

Kinetic Modeling Of Dust Grain Dynamics In Electrostatic Sieving, Aaron Berkhoff, Easton Ingram, Fateme Rezaei, Jeffrey Smith, David Bayless, William Schonberg, Daoru Han

Chemical and Biochemical Engineering Faculty Research & Creative Works

A new kinetic particle modeling framework was developed to investigate electrostatic transport of lunar regolith dust particles with applications to the concept of electrostatic sieving. the new approach is based on kinetic particle dynamics and includes major modules of sampling the particle size distribution, solving electric fields, and tracking motion of charged dust grains. a case study for a concept of electrostatic sieving was chosen to validate the new model. the simulation achieved similar performance of particle size classification as reported in the literature. the new model is computationally efficient (takes a few minutes on a PC-type laptop computer) so …

Delivery Of Tgfβ3 From Magnetically Responsive Coaxial Fibers Reduces Spinal Cord Astrocyte Reactivity In Vitro, Jessica L. Funnell, Jasper Fougere, Diana Zahn, Silvio Dutz, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

A spinal cord injury (SCI) compresses the spinal cord, killing neurons and glia at the injury site and resulting in prolonged inflammation and scarring that prevents regeneration. Astrocytes, the main glia in the spinal cord, become reactive following SCI and contribute to adverse outcomes. The anti-inflammatory cytokine transforming growth factor beta 3 (TGFβ3) has been shown to mitigate astrocyte reactivity; however, the effects of prolonged TGFβ3 exposure on reactive astrocyte phenotype have not yet been explored. This study investigates whether magnetic core-shell electro spun fibers can be used to alter the release rate of TGFβ3 using externally applied magnetic fields, …

Conversion Of Fish Waste Oil Into Biofuel: An Experimental Study, Mahmoud A. Mohamed, Hany A. Elazab, Mamdouh A. Gadalla, Fatma A. Ashour

Chemical and Biochemical Engineering Faculty Research & Creative Works

Egypt is famous for its fish wealth, given its large coasts and freshwater resources, especially of Nile Tilapia and Mugilid fish. It was estimated that domestic fish production increased from 889 thousand tonnes in 2005 to 1620 thousand tonnes in 2016. Thousands of tonnes of fish are consumed yearly, generating substantial amounts of fish waste and residues. Some 26% of the fish consumed is a typical waste. Fish wastes have a significant role in many processes and applications. They are used as feedstock for producing fish meals, a major by-product of fish waste oil. Fish oil is extracted for medical …

Electronic Communication Between Co And Ru Sites Decorated On Nitrogen-Doped Carbon Nanotubes Boost The Alkaline Hydrogen Evolution Reaction, Meng-Ting Gao, Ying Wei, Xue-Meng Hu, Wenj-Jie Zhu, Qing-Qing Liu, Jin-Yuan Qiang, Wan-Wan Liu, Ying Wang, Xu Li, Jian-Feng Huang, Yong-Qiang Feng

Journal of Electrochemistry

Designing highly efficient Pt-free electrocatalysts with low overpotential for an alkaline hydrogen evolution reaction (HER) remains a significant challenge. Here, a novel and efficient cobalt (Co), ruthenium (Ru) bimetallic electrocatalyst composed of CoRu nanoalloy decorated on the N-doped carbon nanotubes (CoRu@N-CNTs), was prepared by reacting fullerenol with melamine via hydrothermal treatment and followed by pyrolysis. Benefiting from the electronic communication between Co and Ru sites, the as-obtained CoRu@N-CNTs catalyst exhibited superior electrocatalytic HER activity. To deliver a current density of 10 mA·cm^–2, it required an overpotential of merely 19 mV along with a Tafel slope of 26.19 mV·dec …

Zhong-Qun Tian, Academician And Honorary Member Of Electrochemistry Committee Chinese Chemical Society, Achieved "Raman Lifetime Award", Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.