Chemical Engineering Commons^™

Thermal Hydraulics Investigation Of A Horizontal Dual Channel Setup Representing Micro Nuclear Reactors Using Integrated Advanced Measurement Techniques, Zeyad Zeitoun

Doctoral Dissertations

The urgency to reduce greenhouse gas emissions has spotlighted nuclear energy as a carbon-free solution. Despite its promise, nuclear safety concerns, highlighted by the 2011 Fukushima disaster, necessitate advancements in reactor technology. The United States has prioritized the development of safer, prismatic micronuclear reactors for the coming decade, focusing on the safe operation of these facilities. These reactors' design addresses potential hazards, particularly in loss of flow accident scenarios, making the understanding of natural circulation gas flow dynamics critical. Experiments on a horizontal dual-channel plenum-to-plenum facility (P2PF) were conducted to closely mimic the conditions within prismatic micronuclear reactors. This study …

Investigation Of The Transport And Plugging Behavior Of Preformed Particle Gels (Ppgs) In Fractures For Conformance Control In Carbonate Reservoirs, Abdulaziz A. Almakimi

Doctoral Dissertations

This study aims to systematically evaluate the performance of preformed particle gels (PPGs) in fractured carbonates mainly through a series of core flooding experiments. Carbonate reservoirs exhibit unique features of heterogeneity and pore geometry, while (PPGs) are known for their plugging efficiency, deformability, and dehydratable nature. The main goal of gel injection in fractured reservoirs is to place a gel pack appropriately into the fracture, diverting injected fluid to the oil-bearing matrix and reducing excessive water production. However, considerable dehydration of (PPGs) is possible at the adjacent matrix and within the fracture, which could lead to a filter-cake formation and/or …

Enhancement Of Intersystem Crossing In Asymmetrically Substituted Bodipy Photosensitizers, Mikhail Filatov, Tatsiana Mikulchyk, Maxine Hodee, Metodej Dvoracek, Venkata N.K. Mamillapalli, Aimee Sheehan, Craig Newman, Sergey M. Borisov, Daniel Escudero, Izabela Naydenova

Articles

We present a novel method to promote intersystem crossing (ISC) and triplet state formation in boron dipyrromethenes (BODIPYs) through the asymmetrical introduction of functional groups within the chromophore. This approach enables the development of new BODIPY photosensitizers without relying on the incorporation of heavy atoms or large electron-donating aromatic groups. Demonstrated on a series of 14 synthesized asymmetrical BODIPY (aBDP) compounds, it significantly enhances photosensitization efficiency compared to the reference symmetrical BODIPYs. In particular, the asymmetrical introduction of ethoxycarbonyl groups into pyrrolic rings of the BODIPY core lead to efficient ISC and singlet oxygen generation, with quantum yields reaching 0.76 …

Incorporating Insulin Into Alginate-Chitosan 3d-Printed Scaffolds: A Comprehensive Study On Structure, Mechanics, And Biocompatibility For Cartilage Tissue Engineering, Afsaneh Jahani, Mohammad Sagdegh Nourbakhsh, Ali Moradi, Marzieh Mohammadi, Lobat Tayebi

Electrical & Computer Engineering Faculty Publications

Osteoarthritis is a leading cause of disability worldwide, challenging current treatments to limited cartilage self-healing capacity. Cartilage tissue engineering (CTE) integrates cells, scaffolds, and signaling molecules, with Insulin being utilized as a differentiation biomolecule due to cost-effectiveness, dose-dependent influence on chondrogenesis, suitable biological activity, and ability to activate relevant receptors. Yet, administering differentiation biomolecules through conventional scaffolds poses a persistent challenge. Alginate (Alg) is commonly employed in CTE for its biocompatibility, though it lacks sufficient mechanical properties. Chitosan (Cs), while enhancing scaffold mechanical properties, but does not independently provide optimal support for chondrogenesis. While Alg-Cs scaffolds have garnered attention, challenges …

Reuse Of Calcium Carbonate (Caco3) Recovered From Discarded Carpets As Filler In Fiber-Reinforced Polymer (Frp) Composites, Roshan Devkota

Graduate Theses, Dissertations, and Problem Reports (ETD)

Over four billion pounds of carpet are discarded annually in the United States, making carpet waste a significant environmental concern. Calcium carbonate (CaCo₃) constitutes up to 45% of the mass of most synthetic carpets. Reusing this CaCo₃ as a filler in the rapidly growing fiber-reinforced polymer (FRP) industry, which is projected to reach USD 10.38 billion, presents a low-cost, practical approach to developing a market-based solution to post-consumer carpet waste.

This study investigates the reuse of CaCo₃ recovered from discarded carpet backing as a filler in FRP composites, focusing on its mechanical viability in comparison to virgin CaCo₃. The methodology …

Engineering Nanomaterials From Phase-Change Biological Materials Reacting With Carbon Dioxide, Qingyang Li

Graduate Theses, Dissertations, and Problem Reports (ETD)

The current global situation concerning CO2 emissions is increasingly alarming, with rising concentrations of CO2 significantly worsening climate change and global warming. Atmospheric CO2 levels are now at their highest in millions of years, driving a host of catastrophic effects, including but not limited to extreme weather events, rising sea levels, ocean acidification, disrupted ecosystems, deteriorating air quality, respiratory health issues, heat-related illnesses, threats to food and water security, and escalating social and geopolitical tensions. To keep global warming to no more than 1.5°C higher than that of pre-industry – as called for in the Paris Agreement – emissions need …

Development And Characterization Of Polysaccharide-Based Controlled Drug Delivery Platforms, Amanda Pepler

Open Access Dissertations

Drug delivery research focuses on overcoming challenges in patient treatment. Most therapeutics are delivered systemically through oral or intravenous routes. However, these administration methods are often inefficient due to therapeutic hydrophobicity, poor bioavailability, and liver metabolic clearance, necessitating frequent dosing. When treatment plans require frequent dosing, patients experience significant fluctuations in therapeutic concentration in the bloodstream, which can increase adverse side effects. These factors contribute to low patient compliance. Therefore, the core focus of drug delivery research is to develop new administration routes for therapeutics. Drug delivery systems (DDS) that can target therapeutics to a localized region offer advantages over …

Multi-Scale Dynamic Modeling, Validation, And Uncertainty Quantification Of Radial Flow Fixed Bed Contactors For Co2 Capture, Ana Flávia De Alencar Arraes Monteiro

Graduate Theses, Dissertations, and Problem Reports (ETD)

One of the key sources of carbon dioxide emissions to the environment is fossil fuel combustion for power generation. Post-combustion CO2 capture using amine-based solvents is currently the most matured process. However, amines are corrosive and lead to degradation products at even moderate temperatures generating environmental pollutants, and require high energy for regeneration. Solid sorbents are a promising alternative. They possess lower regeneration energy, thermal stability, and have highly tunable porous structures with large surface area that can help in achieving high loading and high adsorption rates. This work focuses on mathematical modeling of CO2 adsorption/desorption processes using solid sorbents. …

Microwave-Assisted Reduction Of Critical Metal Oxides From E-Waste Mixture, Kurundu Shavinka Jayasekera

Graduate Theses, Dissertations, and Problem Reports (ETD)

The efficient recovery of critical metals such as tantalum (Ta), manganese (Mn), gallium (Ga), and indium (In) from electronic waste (e-waste) is essential for resource sustainability and environmental protection. This research uses microwave-assisted treatment to investigate the carbothermal reduction of these four specific metals from their oxides in a simulated e-waste mixture, with carbon black serving as both a microwave coupling and reduction agent. Microwave processing is used specifically because it offers a rapid and energy-efficient alternative to conventional thermal methods, with the benefits of intrinsic heating and selective heating of materials. The first experiments centered on understanding the effects …

Augmentation And Hybridization Of Conventional Forms Of Process Control With Advanced Control Methods, Daniel Paul Beahr

Graduate Theses, Dissertations, and Problem Reports (ETD)

Within the last decade in the field of process control, there has developed a distinct gap between the technological advancements of today and the well-established theory that has preceded it. This is most evident where the novel developments and structures often outpace the necessary guarantees and strong foundation required to ensure the possibility of widespread adoption. Therefore, the goals of this work are to broadly integrate those novel advanced control methods into the field of process control in such a way to increase the applicability and encourage implementation.

The first portion of this work seeks to further explore the nature …

Membrane Reactor Modeling And Optimization For Hydrogen Production, Ayooluwa Tomiwa Akintola

Graduate Theses, Dissertations, and Problem Reports (ETD)

There has been an ongoing trend toward cleaner fuels for more environmentally benign forms of energy generation. Recently, hydrogen has been identified as a clean fuel for energy generation. However, the most established, efficient, and widely utilized technique for producing hydrogen remains the steam methane reforming (SMR) in the presence of catalyst. Unlike other fossil fuels, utilizing methane from natural gas in an SMR process to produce hydrogen emits less, but yet a notable sum of carbon dioxide. Furthermore, the endothermic nature of SMR reactions imply that there is a high energy requirement to obtain a substantial amount of hydrogen …

Modeling And Simulation Of Carbon-Neutral Strategies For Methanol Production, Omar Almaraz Barrios

Graduate Theses, Dissertations, and Problem Reports (ETD)

Methanol is a versatile chemical that can be used as a fuel, a solvent, a feedstock for other chemicals, and a hydrogen carrier. Methanol production from natural gas, which is mainly composed of methane, is a well-established process that involves steam reforming, methanol synthesis, and methanol purification. However, this process is energy-intensive and emits large amounts of carbon dioxide, which contributes to global warming and climate change. Therefore, there is a need for alternative methods of methanol production that are more efficient and environmentally friendly. The overall objective of this research is to develop simulation models of two novel methanol …

Determination Of Electrochemical Parameters For Predicting Reaction Mechanism And Algorithmic Approaches To Pain Assessment, Huize Xue

Dissertations

This dissertation introduces novel advancements in electrochemical kinetics and pain assessment, structured into two main parts. The first part focuses on the comprehensive analysis of the kinetic and mechanistic aspects of electrochemical reactions, utilizing a combination of experimental techniques and simulation methods. A new software tool, Envismetrics, was developed using Python to facilitate the analysis of complex electrochemical data, including cyclic voltammetry (CV), chronoamperometry (CA), and hydrodynamic voltammetry (HDV). The software was rigorously tested and validated with well-characterized redox systems such as the ferricyanide/ferrocyanide couple, dimethylamine borane (DMAB), and Per- and Polyfluoroalkyl Substances (PFAS). It was successfully used to determine …

Gas-Generating Reactive Materials: Design, Evaluation And Effect Of Morphology On Their Ignition And Combustion, Purvam Mehulkumar Gandhi

Dissertations

This work investigates optimizing gas-generating reactive materials, focusing on particle morphology's effect on ignition and combustion behavior. Metal-based gas-generating energetic materials (EMs) are promising alternatives to replace traditional CHNO compounds. Design of advanced metal-based EMs requires consistent ways of evaluating how their characteristics affect their ignition and combustion. Many relevant evaluation approaches exist; however, the results may be difficult to compare directly across different studies. Commonly, experimentalists ignite metal-based EMs in enclosed chambers and report pressures, P. However, direct comparison of these pressures is hindered by variations in the chamber volume, V, and the EM mass, m. To standardize the …

Decomposition Of Diisopropyl Methylphosphonate (Dimp) Exposed To Elevated Temperatures And Combustion Products Of Reactive Materials, Elif Irem Senyurt

Dissertations

The safe and efficient destruction of chemical weapon agents (CWAs) stockpiles remains a critical global challenge. Understanding the thermophysical properties, decomposition mechanisms, and interactions of CWAs with their environment is crucial for developing effective strategies to mitigate their threats. Diisopropyl methylphosphonate (DIMP) and Dimethyl methylphosphonate are commonly used nerve agent surrogates. This dissertation focuses on DIMP and DMMP, investigates their properties and behavior under conditions relevant to prompt defeat scenarios.

The thermophysical properties of DIMP and DMMP were experimentally characterized, including vapor-liquid surface tension (3-60 °C) and viscosities of neat and aqueous solutions. Results revealed significant non-ideal behavior in aqueous …

Single-Step Synthesis Of Activated Carbon From Arabica Spent Coffee Ground Using K2co3 As Activator Agent, Ghina Ivana Mieldan, Yuliusman Yuliusman

Journal of Materials Exploration and Findings

Activated carbon is a nanomaterial that is often used as an effective adsorbent. Activated carbon raw materials can use biomass, such as coffee grounds, which can be found along with the growth of public interest in coffee drinks. Chemical activators are used for activation to increase biomass carbon's adsorption capacity. Using K₂CO₃ activator to increase the specific surface area of activated carbon is more harmless than KOH. The use of spent coffee grounds as carbon source and food additive K₂CO₃ as an activator can make food-grade activated carbon that can be used for food. …

Strategic Site Selection For Bio-Lng Plant In Indonesia: A Multi-Criteria Scoring Method Approach, Edma Nadhif Oktariani, Yuliusman Yuliusman

Journal of Materials Exploration and Findings

In Indonesia, the energy sector is still predominantly reliant on fossil fuels, with renewable energy, including liquefied biomethane (Bio-LNG), playing a limited role. Nonetheless, Indonesia has significant potential for Bio-LNG development due to its abundant organic waste resources such as Palm Oil Mill Effluent (POME) from palm oil mills. Having approximately 891 Palm Oil Mills in Indonesia and being spread mostly in Sumatra, this study aims to select a strategic location for a Bio-LNG plant that can enhance logistical efficiency and economic viability for the plant. This study uses Multi-Criteria Decision Making (MCDM) methodologies to assess potential sites based on …

Effect Of Alkyd And Polyester Resin Compositions On Corrosion Resistance, Blistering, And Adhesion In Utilization Of Oily Sludge As Anti-Rust Coating Material, Gerets Land Kakalang, Yohanes David Kristianto, Johny Wahyuadi Mudaryoto

Journal of Materials Exploration and Findings

Oil sludge is a waste derived from upstream and downstream activities of the oil and gas industry which is estimated at 10,000 tonnes generated from all PERTAMINA downstream activities spread across various fields, processing units and depots throughout Indonesia. Oil sludge has the same characteristics as asphalt, where asphalt in previous studies can be used as an anti-rust coating, so that the handling of oily sludge can be topped up by reusing and having its own added value. The purpose of this research is to utilise waste oily sludge as an alternative anti-rust coating material and compare alkyd resin and …

Development Of A Spray Pipe Evaporator For Application On Unproductive Salt Farm Land In Indonesia, Srie Muljani, Ketut Sumada, Alfian Rizki Pradana, Caecilia Pujiastuti

ASEAN Journal of Community Engagement

This article discusses the development of a prototype spray pipe evaporator and its efficiency in producing salt in Indonesia. Due to the length of the salt harvesting season in Indonesia, many salt farmers have closed their business doors, leaving many salt ponds abandoned. The spray pipe evaporator prototype was designed to produce a brine solution with a salinity of 23–24 Be from seawater, which has a salinity of 2.5–3.5 Be, in less than 3 days. This is faster than the conventional process of a brine solution salinity of 24 Be. The prototype spray pipe evaporator was assessed in a 20 …

Black Soldier Fly Larvae (Bsfl) Bioconversion For Circular Economy: A Study In Polaman Village, Siswo Sumardiono, Rizka Amalia, Syaikha Butsaina Dhiya’Ulhaq, Nurika Nazilatul Ilmi, Hermawan Dwi Ariyanto

ASEAN Journal of Community Engagement

Conventional organic waste management methods often lead to environmental degradation and underutilization of valuable resources. In rural areas, such as Polaman Village, limited awareness and inefficient disposal systems exacerbate these issues, thus necessitating innovative and sustainable solutions. This study explores black soldier fly larvae (BSFL) bioconversion as a community-based solution for organic waste management, addresses environmental challenges, and promotes economic empowerment by converting waste into valuable by-products. The study employed a mixed-methods approach, beginning with baseline assessments of waste generation and existing management practices to identify community needs. Educational workshops and hands-on training sessions introduced BSFL bioconversion techniques to local …