Chemical Engineering Commons^™

Effect Of Ionic Liquid Electrolytes In Dsscs With Titanium Dioxide (Tio2) Inverse Opal Structures, Naomi S. Ramesar

Dissertations and Theses

Dye-sensitized solar cells (DSSC) are low-cost alternatives to conventional solar cells that can work well in low-light conditions. Despite considerable study on improving the efficiency of DSSCs, the current liquid electrolyte cell has plateaued at a conversion efficiency of ~ 12%. A major problem with these cells regarding their applicability is the low viscosity and high volatility of the toxic electrolyte, i.e., acetonitrile, which cause leakage and volatilization. We propose that using ionic liquids (ILs), which are more viscous, less volatile, and conductive, may be more suitable electrolytes. However, one unwanted side effect of the higher viscosity of the ILs …

Low-Dose Chemotherapy Of Hepatocellular Carcinoma Through Triggered-Release From Bilayer-Decorated Magnetoliposomes, Yanjing Chen, Yuan Chen, Da Xiao, Arijit Bose, Ruitang Deng, Geoffrey D. Bothun

Chemical, Biomolecular, and Materials Engineering Faculty Publications

Low-dose (LD) chemotherapy is a promising treatment strategy that may be improved by controlled delivery. Polyethylene glycol-stabilized bilayer-decorated magnetoliposomes (dMLs) have been designed as a stimuli-responsive LD chemotherapy drug delivery system and tested in vitro using Huh-7 hepatocellular carcinoma cell line. The dMLs contained hydrophobic superparamagnetic iron oxide nanoparticles within the lipid bilayer and doxorubicin hydrochloride (DOX, 2 μM) within the aqueous core. Structural analysis by cryogenic transmission electron microscopy and dynamic light scattering showed that the assemblies were approximately 120 nm in diameter. Furthermore, the samples consisted of a mixture of dMLs and bare liposomes (no nanoparticles), which provided …

Factors Influencing Material Loss During Iron Ore Pellet Handling, Joseph A. Halt

Dissertations, Master's Theses and Master's Reports - Open

Iron ore concentrate pellets have the potential to fracture and abrade during transportation and handling, which produces unwanted fine particulates and dust. Consequently, pellet producers characterize the abrasion resistance of their pellets, using an Abrasion Index (AI), to indicate whether their products will produce unacceptable levels of fines. However, no one has ever investigated whether the AI correlates to pellet dustiness.

During the course of this research, we investigated the relationship between AI and iron ore concentrate pellet dustiness using a wide range of industrial and laboratory pellet samples. The results showed that, in general, AI can be used to …

Life Cycle Assessments (Lcas) Of Pyrolysis-Based Gasoline And Diesel From Different Regional Feedstocks: Corn Stover, Switchgrass, Sugar Cane Bagasse, Waste Wood, Guinea Grass, Algae, And Albizia, Matthew J. Mihalek

Dissertations, Master's Theses and Master's Reports - Open

Renewable hydrocarbon biofuels are being investigated as possible alternatives to conventional liquid transportation fossil fuels like gasoline, kerosene (aviation fuel), and diesel. A diverse range of biomass feedstocks such as corn stover, sugarcane bagasse, switchgrass, waste wood, and algae, are being evaluated as candidates for pyrolysis and catalytic upgrading to produce drop-in hydrocarbon fuels. This research has developed preliminary life cycle assessments (LCA) for each feedstock-specific pathway and compared the greenhouse gas (GHG) emissions of the hydrocarbon biofuels to current fossil fuels. As a comprehensive study, this analysis attempts to account for all of the GHG emissions associated with each …

Purification And Effectiveness Of Vaccines And Antiviral Compounds, Maria F. Gencoglu

Dissertations, Master's Theses and Master's Reports - Open

Viral infections account for over 13 million deaths per year. Antiviral drugs and vaccines are the most effective method to treat viral diseases. Antiviral compounds have revolutionized the treatment of AIDS, and reduced the mortality rate. However, this disease still causes a large number of deaths in developing countries that lack these types of drugs. Vaccination is the most effective method to treat viral disease; vaccines prevent around 2.5 million deaths per year. Vaccines are not able to offer full coverage due to high operational costs in the manufacturing processes. Although vaccines have saved millions of lives, conventional vaccines often …

Enzyme Optimization For Lignocellulose Hydrolysis Using Mechanistic Modeling, Adam S. Marlowe

Dissertations, Master's Theses and Master's Reports - Open

A novel mechanistic model for the saccharification of cellulose and hemicellulose is utilized to predict the products of hydrolysis over a range of enzyme loadings and times. The mechanistic model considers the morphology of the substrate and the kinetics of enzymes to optimize enzyme concentrations for the enzymatic hydrolysis of cellulose and hemicellulose simultaneously. Substrates are modeled based on their fraction of accessible sites, glucan content, xylan content, and degree of polymerizations. This enzyme optimization model takes into account the kinetics of six core enzymes for lignocellulose hydrolysis: endoglucanase I (EG1), cellobiohydrolase I (CBH1), cellobiohydrolase II (CBH2), and endo-xylanase (EX) …

Characterizing And Improving Production Of Fermentable Sugars And Co-Products From A Forest Product Industry Wastewater Stream, Jifei Liu

Dissertations, Master's Theses and Master's Reports - Open

Hardboard processing wastewater was evaluated as a feedstock in a bio refinery co-located with the hardboard facility for the production of fuel grade ethanol. A thorough characterization was conducted on the wastewater and the composition changes of which during the process in the bio refinery were tracked. It was determined that the wastewater had a low solid content (1.4%), and hemicellulose was the main component in the solid, accounting for up to 70%. Acid pretreatment alone can hydrolyze the majority of the hemicellulose as well as oligomers, and over 50% of the monomer sugars generated were xylose. The percentage of …

New Microfluidic System To Increase Robustness Of Electrode Performance And Develop Point-Of-Care Hematocrit Device, Hwi Yong Lee

Dissertations, Master's Theses and Master's Reports - Open

The present dissertation aimed to develop a new microfluidic system for a point-of-care hematocrit device. Stabilization of microfluidic systems via surfactant additives and integration of semipermeable SnakeSkin® membranes was investigated. Both methods stabilized the microfluidic systems by controlling electrolysis bubbles. Surfactant additives, Triton X-100 and SDS stabilized promoted faster bubble detachment at electrode surfaces by lowering surface tension and decreased gas bubble formation by increasing gas solubility. The SnakeSkin® membranes blocked bubbles from entering the microchannel and thus less disturbance to the electric field by bubbles occurred in the microchannel. Platinum electrode performance was improved by carbonizing electrode surface using …

Investigation Of Air Jigging And Air Classification To Recover Metallic Particles From Analytical Samples, Hrishikesh Vilas Shinde

Dissertations, Master's Theses and Master's Reports - Open

Analyzing “nuggety” gold samples commonly produces erratic fire assay results, due to random inclusion or exclusion of coarse gold in analytical samples. Preconcentrating gold samples might allow the nuggets to be concentrated and fire assayed separately. In this investigation synthetic gold samples were made using similar density tungsten powder and silica, and were preconcentrated using two approaches: an air jig and an air classifier. Current analytical gold sampling method is time and labor intensive and our aim is to design a set-up for rapid testing. It was observed that the preliminary air classifier design showed more promise than the air …

Dynamics And Control Of Reactive Distillation Process For Monomer Synthesis Of Polycarbonate Plants, Mathkar Alawi A Alharthi

Dissertations, Master's Theses and Master's Reports - Open

Polycarbonate (PC) is an important engineering thermoplastic that is currently produced in large industrial scale using bisphenol A and monomers such as phosgene. Since phosgene is highly toxic, a non-phosgene approach using diphenyl carbonate (DPC) as an alternative monomer, as developed by Asahi Corporation of Japan, is a significantly more environmentally friendly alternative. Other advantages include the use of CO₂ instead of CO as raw material and the elimination of major waste water production. However, for the production of DPC to be economically viable, reactive-distillation units are needed to obtain the necessary yields by shifting the reaction-equilibrium to the …

2013-2014 Che Newsletter, Department Of Chemical Engineering, Michigan Technological University

Department of Chemical Engineering Newsletters

Table of Contents

• Department
• Research
• Student News
• Faculty News
• Alumni & Friends

Nanofiltration Membranes From Oriented Mesoporous Silica Thin Films, Mary K. Wooten

Theses and Dissertations--Chemical and Materials Engineering

The synthesis of mesoporous silica thin films using surfactant templating typically leads to an inaccessible pore orientation, making these films not suitable for membrane applications. Recent advances in thin film synthesis provide for the alignment of hexagonal pores in a direction orthogonal to the surface when templated on chemically neutral surfaces. In this work, orthogonal thin film silica membranes are synthesized on alumina supports using block copolymer poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) (P123) as the template. The orthogonal pore structure is achieved by sandwiching membranes between two chemically neutral surfaces, resulting in 90 nm thick films. Solvent flux of ethanol through …

Quartz Crystal Microbalance Investigation Of Cellulosome Activity From Clostridium Thermocellum On Model Cellulose Films, Shanshan Zhou

Theses and Dissertations--Chemical and Materials Engineering

The cost of deconstructing cellulose into soluble sugars is a key impediment to the commercial production of lignocellulosic biofuels. The use of the quartz crystal microbalance (QCM) to investigate reaction variables critical to enzymatic cellulose hydrolysis is investigated here, extending previous studies of fungal cellulase activity for the first time to whole cell cellulases. Specifically, the activity of the cellulases of Clostridium thermocellum, which are in the form of cellulosomes, was investigated. To clearly differentiate the activity of free cellulosome and cell-bound cellulosome, the distribution of free cellulosome and cell-bound cellulosome in crude cell broth at different growth stages …

Functionalized Membranes For Environmental Remediation And Selective Separation, Li Xiao

Theses and Dissertations--Chemical and Materials Engineering

Membrane process including microfiltration (MF), ultrafiltration (UF), nanofiltration (NF) and reverse osmosis (RO) have provided numerous successful applications ranging from drinking water purification, wastewater treatment, to material recovery. The addition of functional moiety in the membranes pores allows such membranes to be used in challenging areas including tunable separations, toxic metal capture, and catalysis. In this work, polyvinylidene fluoride (PVDF) MF membrane was functionalized with temperature responsive (poly(N-isopropylacrylamide), PNIPAAm) and pH responsive (polyacrylic acid, PAA) polymers. It’s revealed that the permeation of various molecules (water, salt and dextran) through the membrane can be thermally or pH controlled. The introduction of …

Nanometer-Scale Membrane Electrode Systems For Active Protein Separation, Enzyme Immobilization And Cellular Electroporation, Zhiqiang Chen

Theses and Dissertations--Chemical and Materials Engineering

Automated and continuous processes are the future trends in downstream protein purification. A functionalized nanometer-scale membrane electrode system, mimicking the function of cell wall transporters, can selectively capture genetically modified proteins and subsequently pump them through the system under programmed voltage pulses. Numerical study of the two-step pulse pumping cycles coupled with experimental His-GFP releasing study reveals the optimal 14s/1s pumping/repel pulse pumping condition at 10 mM bulk imidazole concentration in the permeate side. A separation factor for GFP: BSA of 9.7 was achieved with observed GFP electrophoretic mobility of 3.1×10^-6 cm² s^-1 V^-1 at 10 …

Iron And Iron Oxide Functionalized Membranes With Applications To Selected Chloro-Organic And Metal Removal From Water, Minghui Gui

Theses and Dissertations--Chemical and Materials Engineering

The development of functionalized membranes with tunable pores and catalytic properties provides us an opportunity to manipulate the membrane pore structure, selectivity and reactivity. By introducing the functional groups into membrane pores, dissolved metal ions and reactive particles can be effectively immobilized within the polymer matrix for toxic chloro-organic and heavy metal remediation in water.

A polyelectrolyte functionalized membrane platform with tunable pore size and ion exchange capacity has been developed for iron/iron oxide nano-catalyst synthesis and chlorinated organic compound (trichloroethylene, TCE and polychlorinated biphenyls, PCBs) degradation. Highly robust polyvinylidene fluoride (PVDF) microfiltration membranes are used as the support with …

Layer-By-Layer Assemblies For Membrane-Based Enzymatic Catalysis, Andrew R. Tomaino

Theses and Dissertations--Chemical and Materials Engineering

While considerable progress has been made towards understanding the effect that membrane-based layer-by-layer (LbL) immobilizations have on the activity and stability of enzymatic catalysis, detailed work is required in order to fundamentally quantify and optimize the functionalization and operating conditions that define these properties. This work aims to probe deeper into the nature of transport mechanisms by use of pressure-induced, flow-driven enzymatic catalysis of LbL-functionalized hydrophilized poly(vinyldiene) (PVDF)-poly(acrylic acid) (PAA)-poly(allylamine hydrochloride) (PAH)-glucose oxidase (GOx) membranes. These membranes were coupled in a sealed series following cellulose acetate (CA) membranes for the elimination of product accumulation within the feed-side solution during operation. …

Generation Of Multicomponent Polymer Blend Microparticles Using Droplet Evaporation Technique And Modeling Evaporation Of Binary Droplet Containing Non-Volatile Solute, Venkat N. Rajagopalan

Theses and Dissertations--Chemical and Materials Engineering

Recently, considerable attention has been focused on the generation of nano- and micrometer scale multicomponent polymer particles with specifically tailored mechanical, electrical and optical properties. As only a few polymer-polymer pairs are miscible, the set of multicomponent polymer systems achievable by conventional methods, such as melt blending, is severely limited in property ranges. Therefore, researchers have been evaluating synthesis methods that can arbitrarily blend immiscible solvent pairs, thus expanding the range of properties that are practical. The generation of blended microparticles by evaporating a co-solvent from aerosol droplets containing two dissolved immiscible polymers in solution seems likely to exhibit a …

A Multidisciplinary Techno-Economic Decision Support Tool For Validating Long-Term Economic Viability Of Biorefining Processes, Sumesh Sukumara

Theses and Dissertations--Chemical and Materials Engineering

Increasing demand for energy and transportation fuel has motivated researchers all around the world to explore alternatives for a long-term sustainable source of energy. Biomass is one such renewable resource that can be converted into various marketable products by the process of biorefining. Currently, research is taking strides in developing conversion techniques for producing biofuels from multiple bio-based feedstocks. However, the greatest concern with emerging processes is the long-term viability as a sustainable source of energy. Hence, a framework is required that can incorporate novel and existing processes to validate their economic, environmental and social potential in satisfying present energy …

Thermo-Chemical Conversion Of Coal-Biomass Blends: Kinetics Modeling Of Pyrolysis, Moving Bed Gasification And Stable Carbon Isotope Analysis, Abhijit Bhagavatula

Theses and Dissertations--Chemical and Materials Engineering

The past few years have seen an upsurge in the use of renewable biomass as a source of energy due to growing concerns over greenhouse gas emissions caused by the combustion of fossil fuels and the need for energy independence due to depleting fossil fuel resources. Although coal will continue to be a major source of energy for many years, there is still great interest in replacing part of the coal used in energy generation with renewable biomass. Combustion converts inherent chemical energy of carbonaceous feedstock to only thermal energy. On the other hand, partial oxidation processes like gasification convert …