Chemical Engineering Commons^™

Wavelet Transform On Digital Rainbow Hologram Based On Spectral Compression For Quality Enhancement In 3d Display Media, Ucuk Darusalam, Panca Dewi Pamungkasari

Makara Journal of Technology

A digital rainbow hologram (DRH) is a potential next-generation three-dimensional display media for the development of modern and smart electronics devices. It is one of the methods that can support the characteristic whereby a realistic display media occupies the space that the real object would have occupied. Since a rainbow hologram records a large amount of spatial or temporal frequency component from the object that represents the rainbow spectrum, a large amount of information needs to be decoded digitally. In this paper, to reconstruct a DRH, we propose a novel method based on the modulation of red, green, and blue …

Transformation Of Char Carbon During Bubbling Fluidized Bed Gasification Of Biomass, Kevin Timmer, Robert C. Brown

Faculty Work Comprehensive List

This study focuses on the fate of carbon in the char generated by devolatilization of biomass during fluidized bed gasification. A carbon balance model was developed to distinguish between char transformed to carbon-bearing gases and its comminution and elutriation as fine char during gasification. The model accurately predicts the transient accumulation of char carbon in the reactor. Experiments revealed steady state reactor char carbon loadings were achieved after multiple hours of gasification. The model formed the basis of an experimental methodology that assesses the transformation of char carbon based on collection of elutriated solids from the reactor and assessment of …

Revisiting The Butler-Mokrys Model For The Vapor-Extraction Process, Vijitha Mohan, Partho Neogi, Baojun Bai

Chemical and Biochemical Engineering Faculty Research & Creative Works

The dynamics of a process in which a solvent in the form of a vapor or gas is introduced in a heavy-oil reservoir is considered. The process is called the solvent vapor-extraction process (VAPEX). When the vapor dissolves in the oil, it reduces its viscosity, allowing oil to flow under gravity and be collected at the bottom producer well. The conservation-of-species equation is analyzed to obtain a more-appropriate equation that differentiates between the velocity within the oil and the velocity at the interface, which can be solved to obtain a concentration profile of the solvent in oil. We diverge from …

Experimental Investigation Of The Manufacture Of Tunable Graphene Oxide Filter Membranes Using Intense Pulse Light, Joshua H Kotter

Electronic Theses and Dissertations

Reduced graphene oxide is a thin, strong, and inexpensive material with a channel and pore structure that make it a promising candidate for a filtration material. Reduced graphene oxide has been produced and tested in the laboratory, but a lack of scalable manufacturing techniques have limited its commercial use.

This thesis has shown that graphene oxide can be rapidly manufactured with an industrially scalable flash reduction process. The flash reduction process uses 0.58 millisecond pulses from a xenon lamp to reduce the graphene oxide film in less than a minute. Results for partially reduced graphene oxide membranes tuned by the …

Development Of Biodegradable -Polylactic Acid - Date Palm Waste Composite As Thermal Insulation Material, Mohamed Saeed Barkhad

Theses

This study aims to develop a green polymer composite from local natural waste, such as date pit powder (DPP) and date palm wood powder (DPWP), as an insulating material. The recycling and reuse of natural waste as filler for green insulation materials has many significant benefits for the environment of the UAE.

Date palm waste was mixed with a polylactic acid (PLA) polymer with various proportions in a melt extruder. The mixtures produced were then shaped differently after testing in a thermal compression machine. These composites were tested to evaluate their physical (water absorption, chemical resistance, and bulk density), thermal …

Intelligent Machine Learning: Tailor-Making Macromolecules, Yousef Mohammadi, Mohammad Reza Saeb, Alexander Penlidis, Esmaiel Jabbari, Florian J. Stadler, Philippe Zinck, Krzysztof Matyjaszewski

Faculty Publications

Nowadays, polymer reaction engineers seek robust and effective tools to synthesize complex macromolecules with well-defined and desirable microstructural and architectural characteristics. Over the past few decades, several promising approaches, such as controlled living (co)polymerization systems and chain-shuttling reactions have been proposed and widely applied to synthesize rather complex macromolecules with controlled monomer sequences. Despite the unique potential of the newly developed techniques, tailor-making the microstructure of macromolecules by suggesting the most appropriate polymerization recipe still remains a very challenging task. In the current work, two versatile and powerful tools capable of effectively addressing the aforementioned questions have been proposed and …

Molecularly Conductive Behavior Of Blended Polymer Electrolyte-Based Cmc/Pva, Noor Saadiah Mohd Ali, Dishen Zhang, Yuki Nagao, Ahmad Salihin Samsudin

Makara Journal of Technology

This study investigated the electrical conduction and structural behavior of blended polymer electrolyte (BPE)-based carboxymethyl cellulose (CMC) and polyvinyl alcohol (PVA) in the development of solid-state electrochemical devices. Based on impedance spectroscopy and correlating Fourier transform infrared (FTIR) with thermogravimetric analysis, a framework was proposed to explain the structural enhancement of the BPE system. As revealed by FTIR, the optimum conductivity of CMC/PVA BPEs was 9.21 × 10−6 Scm−1 for 80:20 composition attributed to the intermolecular attraction between the polymers. Thermal stability of the CMC/PVA was influenced by the formation of a hydrogen bond between the hydroxyl (-OH), carboxylate (-COO-), …

Multistage Sonication Effect On The Composition And Properties Of Degraded Chitosan Product, Nurul Laili Arifin, Emma Savitri, Anjar Indah, Fesa Putra, Sumarno Sumarno

Makara Journal of Technology

The sonication method randomly breaks polymer chains to produce a varied distribution of products. A scheme with multi-stage sonication steps is proposed to identify oligomers and low molecular weight chitosan based on changes to the degrad-ed product. For each sonication level, 1% (w/v) chitosan in 1% (v/v) aqueous acetic acid was sonicated for 120 min at 60 °C. The products of the sonication treatment were deprotonized by adding an alkali solution, freeze dried and insoluble product re-sonicated until a low molecular weight was produced. Low molecular weight chitosan/insoluble products were character-ized with Fourier-transform infrared spectra (FT-IR) and X-ray diffraction (XRD) …

Data Fusion Method Based On Adaptive Kalman Filtering, Bernadus Herdi Sirenden

Makara Journal of Technology

This paper discusses data fusion methods to combine the data from a rotary encoder and ultrasonic sensor. Both sensors are used in a micro-flow calibration system developed by the Research Center of Metrology LIPI. The methods studied are hierarchical data fusion and Kalman filtering. Three types of Kalman filters (KFs) are compared: the conventional Kalman filter and two adaptive Kalman filters. Moreover, a method to combine the uncertainty results from KF in hierarchical data fusion is proposed. The aim of this study is to find appropriate methods of data fusion that can be implemented in micro-flow calibration systems. Data from …

Study Of Zno Nanospheres Fabricated Via Thermal Evaporation For Solar Cell Application, Fatin Farisha Alia Azmi, Bouchta Sahraoui, Saifful Kamaluddin Muzakir

Makara Journal of Technology

A solar cell is a device that absorbs light energy to generate electrical energy. A typical example of a solar cell is the quantum dot solar cell (QDSC), which consists of three main components: (i) fluorophore: the component that absorbs light and generates excited state electrons and holes, (ii) photoelectrode: the component that transports the excited state electron and prevents recombination of excited state electrons and holes, and (iii) electrolyte: the component that re-plenishes the vacancy left by the excited electron in the hole. Despite the increasing number of research in the QDSC field, to date, a device with significant …

Sorption-Based Energy Storage Systems: A Review, Kyaw Thu, Nasruddin Nasruddin, Sourav Mitra, Bidyut Baran Saha

Makara Journal of Technology

Mismatched timing between the supply and demand of energy calls for reliable storage systems. Energy storage systems have become further significant with the widespread implementation of renewable energy. These systems can mitigate problems that are often associated with renewable energy sources such as supply unreliability while meeting the de-mand during peak hours. Energy can be stored in various forms, yet storage systems can be generally grouped based on their output forms, namely (i) electricity and (ii) heat or thermal energy. Electrical energy is the most convenient and effective form since it can power almost all modern devices. However, the electricity …

Electrical Properties Of A Novel Solid Biopolymer Electrolyte Based On Algi-Nate Incorporated With Citric Acid, Ahmad Faizrin Ahmad Fuzlin, Noor Syahida Ismail, Yuki Nagao, Ahmad Salihin Samsudin

Makara Journal of Technology

In the present study, a novel solid biopolymer electrolyte (SBE) system is introduced by doping citric acid into alginate polymer. A sample of the alginate-citric acid SBE system was prepared via a solution casting technique. Using electrical impedance spectroscopy (EIS), the electrolytes of alginate-citric acid analyzed from 5 Hz to 1 MHz achieved the highest conductivity at 20 wt.% of 5.49 × 10-7 S cm-1. The temperature dependence of various citric acid amounts obeyed the Arrhenius rule with R2~1, where all SBE systems were thermally activated with increasing temperature. The dielectric studies of the alginate-citric acid SBE system showed non-Debye …

Design And Optimization Of A Microfluidic Device To Study The Effects Of Fluid Shear Stress On Extravasation, Joseph B. Balhoff

Honors Capstones

No abstract provided.

Nanoparticle Burst Timing Optimization, Simon Grigoryan

Honors Capstones

No abstract provided.

Electrode Development And Electrocatalysts Design For Polymer Electrolyte Membrane Fuel Cells, Xiong Peng

Theses and Dissertations

Because of environmental issues and national conflicts caused by overuse of fossil fuels, there is a need to seek renewable ways to utilize energy. In the transportation sector, hydrogen-based polymer electrolyte membrane fuel cells, including proton exchange membrane fuel cells (PEMFCs) and anion exchange membrane fuel cells (AEMFCs), have been considered as a promising alternative to conventional combustion engines. However, the widespread commercialization of both PEMFCs and AEMFCs has been hindered by several factors, including cost and performance. In this thesis, a series of topics including electrode fabrication, electrocatalyst development for both PEMFCs and AEMFCs, as well as the water …

The Use Of Multi-Targeting Natural Products For The Treatment Of Cancer, Wesley Taylor

Theses and Dissertations

The paradigm shift in cancer treatments from traditional chemotherapeutics to targeted therapies has rapidly improved prognoses for patients for whom cancer was once a death sentence. This is especially true in the case of targeted immune therapies which activate the body’s own natural defense system to fight cancer. Despite these advances, however, cancer remains the second leading cause of death in the United States. The promise of targeted therapeutics has faced significant hurdles in providing effective cancer treatments, namely the limited percentage of susceptible cancers for each treatment, high cost burden, high toxicities, and significant risk of treatment induced resistance. …

Process Design: Maleic Anhydride Unit, Valerie Kay, Jacqueline Phillips, Olivia Smithson

Senior Theses

Gamecock Chemical Company has proposed the construction of a maleic anhydride plant at its Houston refinery. The plant is to produce 40,000 metric tons per year of maleic anhydride from a mixture of excess butanes. This design team has been asked to produce a conceptual design, simulation, and profitability analysis for the proposed plant. The simulation software Aspen Plus by AspenTech was the primary software used to design the plant, and the CAPCOST program in Microsoft suite’s Excel was utilized for the economic review of the process.

Maleic anhydride is produced by the thermal oxidation of n-butane at an elevated …

Heterogeneous Catalysis For The Upgrading Of Biomass Derived Chemicals Via Hydrodeoxygenation, Elizabeth Barrow

Theses and Dissertations

An important step in the upgrading of biomass derived chemicals is the removal of excess oxygen. The works reported here are focused on studying the heterogeneous catalysts that can be utilized for that upgrading through hydrodeoxygenation. This work begins with a discussion of the alkylation of short chain platform chemicals for chain growth and also demonstrates the proof of concept of combining alkylation and hydrodeoxygenation in a single step. Then, because of the promising nature of ReOx- Pd/CeO2 for selective hydrodeoxygenation, a detailed study of ReOx/CeO2 is presented. Finally, a new surface structure interpretation is presented for P/Ni(111) which could …

Production Of Anti-Corrosion Materials From Uae Date Palm Waste, Nour Shehadeh Abdelrahman

Theses

Palm tree serves as the main source of biomass in the Gulf countries. The United Arab Emirates (UAE) alone is blessed with more than 40 million date palm trees, which generate a huge amount of waste annually. The main objective of this thesis is to examine the ability to produce a corrosion inhibitor from a date palm tree, waste, starting by extracting lignin from different parts of the date palm tree and characterizing the extracted lignin, converting lignin to sodium lignosulfonate, while selecting the optimum condition for the conversion reaction and characterizing the prepared lignosulfonate. Finally, the corrosion efficiency for …

Investigating Green Inhibitors For Acidic Corrosion Of Carbon Steel, Osama Abu-Alyosr Kamal Ibrahim

Theses

This study is intended to investigate Khalas palm date pits extract as a green corrosion inhibitor alternative to commercial inhibitors. Inhibition efficiency of the obtained extract was investigated on carbon steel grade S355JR immersed in different corrosive mediums of 2 molarity hydrochloric acid (������) solution and seawater solution. Along with other ingredients in palm date pits, Polyphenolic compounds have a significant anti-oxidation property and were found effective in reducing corrosion rate.

Due to its common industrial applications, Carbon steel was used in this investigation as the corroding medium, while 2M ������ and seawater solutions were used separately as the corrosive …