Self-Adhesive Silicone Microstructures For The Treatment Of Tympanic Membrane Perforations,
2021
Missouri University of Science and Technology
Self-Adhesive Silicone Microstructures For The Treatment Of Tympanic Membrane Perforations, Gabriela Moreira Lana, Katharina Sorg, Gentiana Ioana Wenzel, Dietmar Hecker, René Hensel, Bernhard Schick, Klaus Kruttwig, Eduard Arzt
Chemical and Biochemical Engineering Faculty Research & Creative Works
Inspired by the gecko foot, polymeric microstructures have demonstrated reliable dry adhesion to both stiff objects and sensitive surfaces such as skin. Microstructured silicone patches are proposed, herein, for the treatment of tympanic membrane perforations with the aim of serving as an alternative for current surgical procedures that require anesthesia and ear canal packing. Sylgard 184 PDMS micropillars of 20 μm in diameter and 60 μm in length are topped by a Soft Skin Adhesive (SSA) MG7-1010 terminal layer, of about 25 μm thickness. The adhesion is evaluated by specially designed tack tests against explanted murine eardrums and, for comparison, …
Understanding The Plugging Performance Of Hpam-Cr (Iii) Polymer Gel For Co2 Conformance Control,
2021
Missouri University of Science and Technology
Understanding The Plugging Performance Of Hpam-Cr (Iii) Polymer Gel For Co2 Conformance Control, Xindi Sun, Baojun Bai, Ali Khayoon Alhuraishawy, Daoyi Zhu
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
With the demand for conformance control in carbon dioxide (CO2) flooding fields, hydrolyzed polyacrylamide-chromium [HPAM-Cr (III)] polymer gel has been applied in fields for CO2 conformance control. However, the field application results are mixed with success and failure. This paper is intended to understand the HPAM-Cr (III) polymer gel plugging performance in CO2 flooding reservoirs through laboratory experiments and numerical analysis. We conducted core flooding tests to understand how the cycles of CO2 and water affect the HPAM-Cr (III) polymer gel plugging efficiency to CO2 and water during a water-alternating-gas (WAG) process. Berea Sandstone …
Cochlear Inflammaging In Relation To Ion Channels And Mitochondrial Functions,
2021
Missouri University of Science and Technology
Cochlear Inflammaging In Relation To Ion Channels And Mitochondrial Functions, Parveen Bazard, Jennifer Pineros, Robert D. Frisina, Mark A. Bauer, Alejandro A. Acosta, Lauren R. Paganella, Dominika Borakiewicz, Mark Thivierge, Freyda L. Mannering, Xiaoxia Zhu, Bo Ding
Chemical and Biochemical Engineering Faculty Research & Creative Works
The slow accumulation of inflammatory biomarker levels in the body—also known as inflammation—has been linked to a myriad of age-related diseases. Some of these include neurodegenerative conditions such as Parkinson's disease, obesity, type II diabetes, cardiovascular disease, and many others. Though a direct correlation has not been established, research connecting age-related hearing loss (ARHL)—the number one communication disorder and one of the most prevalent neurodegenerative diseases of our aged population—and inflammation has gained interest. Research, thus far, has found that inflammatory markers, such as IL-6 and white blood cells, are associated with ARHL in humans and animals. Moreover, studies investigating …
Optoacoustically Induced Auditory Brainstem Responses In The Mouse Model Enhanced Through An Absorbing Film,
2021
Missouri University of Science and Technology
Optoacoustically Induced Auditory Brainstem Responses In The Mouse Model Enhanced Through An Absorbing Film, Gabriela Lana
Chemical and Biochemical Engineering Faculty Research & Creative Works
No abstract provided.
Comparative Evaluation Of Two Glass Polyalkenoate Cements: An In Vivo Pilot Study Using A Sheep Model,
2021
Missouri University of Science and Technology
Comparative Evaluation Of Two Glass Polyalkenoate Cements: An In Vivo Pilot Study Using A Sheep Model, Leyla Hasandoost, Daniella Marx, Paul Zalzal, Oleg Safir, Mark Hurtig, Cina Mehrvar, Stephen D. Waldman, Marcello Papini, Mark R. Towler
Chemical and Biochemical Engineering Faculty Research & Creative Works
Poly(methyl methacrylate) (PMMA) is used to manage bone loss in revision total knee arthroplasty (rTKA). However, the application of PMMA has been associated with complications such as volumetric shrinkage, necrosis, wear debris, and loosening. Glass polyalkenoate cements (GPCs) have potential bone cementation applications. Unlike PMMA, GPC does not undergo volumetric shrinkage, adheres chemically to bone, and does not undergo an exothermic setting reaction. In this study, two different compositions of GPCs (GPCA and GPCB), based on the patented glass system SiO2-CaO-SrO-P2O5-Ta2O5, were investigated. Working and setting times, pH, ion release, …
Threshold Concentration And Random Collision Determine The Growth Of The Huntingtin Inclusion From A Stable Core,
2021
CUNY York College
Threshold Concentration And Random Collision Determine The Growth Of The Huntingtin Inclusion From A Stable Core, Sen Pei, Theresa C. Swayne, Jeffrey F. Morris, Lesley Emtage
Publications and Research
The processes underlying formation and growth of unfolded protein inclusions are relevant to neurodegenerative diseases but poorly characterized in living cells. In S. cerevisiae, inclusions formed by mutant huntingtin (mHtt) have some characteristics of biomolecular condensates but the physical nature and growth mechanisms of inclusion bodies remain unclear. We have probed the relationship between concentration and inclusion growth in vivo and find that growth of mHtt inclusions in living cells is triggered at a cytoplasmic threshold concentration, while reduction in cytoplasmic mHtt causes inclusions to shrink. The growth rate is consistent with incorporation of new material through collision and coalescence. …
The Effects Of Ceria Loading On Three-Way Catalysts For Passive Scr Operation,
2021
Oak Ridge National Laboratory
The Effects Of Ceria Loading On Three-Way Catalysts For Passive Scr Operation, Calvin R. Thomas, Josh A. Pihl, Vitaly Y. Prikhodko, Michelle K. Kidder, Jochen A. Lauterbach, Todd J. Toops
Faculty Publications
Passive SCR systems, which employ both a three-way catalyst and SCR catalyst, are effective for the reduction of nitrogen oxide (NOx) emissions from lean burn gasoline engines. However, questions remain regarding the effect of three-way catalyst formulations on their performance in these systems. Here, Pd/CeOx/Al2O3 catalysts with variable CeOx loading were synthesized, characterized, and evaluated to determine the effects of CeOx on catalyst performance. While a small amount of ceria was beneficial for promoting essential reactions, excess ceria was detrimental due to the increase in oxygen storage capacity. Additionally, insights into potential reaction pathways for NH3 production were determined.
Methane Emission Treatment And Potential Upcycling Using Methylomicrobium Alcaliphilum,
2021
Utah State University
Methane Emission Treatment And Potential Upcycling Using Methylomicrobium Alcaliphilum, Jace Parkinson
All Graduate Plan B and other Reports, Spring 1920 to Spring 2023
Anthropogenic methane emissions are harmful to the environment and can be difficult to treat. Use of M. alcaliphilum for bioremediation of methane looks to be one of the most promising methods of reducing the negative environmental impacts of methane emissions while simultaneously providing an economic incentive. Successful bioreactor design for M. alcaliphilum based methane treatment requires biokinetic constants and microbial growth information. Methods were established for determining biokinetic constants, including growth rate, biomass yield, specific methane consumption rate, and a correlation between methane oxidation and carbon dioxide production for M. alcaliphilum. Values determined for these constants were used to …
In Vitro Osteogenic Performance Of Two Novel Strontium And Zinc-Containing Glass Polyalkenoate Cements,
2021
Missouri University of Science and Technology
In Vitro Osteogenic Performance Of Two Novel Strontium And Zinc-Containing Glass Polyalkenoate Cements, Daniella Marx, Alireza Rahimnejad Yazdi, Marcello Papini, Mark R. Towler
Chemical and Biochemical Engineering Faculty Research & Creative Works
Glass polyalkenoate cements (GPCs) are under investigation as potential bone adhesives, as they may provide an alternative to polymethylmethacrylate-based cements. GPCs containing strontium (Sr) and zinc (Zn) in place of aluminum (Al) are of particular interest because these ions are known stimulators of osteoprogenitor differentiation. GPCs have been manufactured from a novel bioactive glass (SiO2:0.48, ZnO:0.36, CaO:0.12, SrO:0.04) in the past, but, while such materials have been assessed for their influence on viability, their influence on osteogenic function has not been investigated until now. For this study, two GPCs were formulated from the same glass precursor evaluated in previous studies. …
The Effects Of Ceria Loading On Three-Way Catalysts For Passive Scr Operation,
2021
University of South Carolina - Columbia
The Effects Of Ceria Loading On Three-Way Catalysts For Passive Scr Operation, Calvin R. Thomas, Josh A. Pihl, Vitaly Y. Prikhodko, Michelle K. Kidder, Jochen A. Lauterbach, Todd J. Toops
Faculty Publications
Passive SCR systems, which employ both a three-way catalyst and SCR catalyst, are effective for the reduction of nitrogen oxide (NOx) emissions from lean burn gasoline engines. However, questions remain regarding the effect of three-way catalyst formulations on their performance in these systems. Here, Pd/CeOx/Al2O3 catalysts with variable CeOx loading were synthesized, characterized, and evaluated to determine the effects of CeOx on catalyst performance. While a small amount of ceria was beneficial for promoting essential reactions, excess ceria was detrimental due to the increase in oxygen storage capacity. Additionally, insights into potential reaction pathways for NH3 production were determined.
Rheological Properties Of Aged Crude Hard Wood Pyrolysis Oil,
2021
University of Dar es salaam
Rheological Properties Of Aged Crude Hard Wood Pyrolysis Oil, Divina D. Kaombe
Tanzania Journal of Engineering and Technology (TJET)
Upon storage of the pyrolysis oil, aging reactions may initiate phase separation and change of the rheological properties. These changes lead to unfavourable fuel characteristics in handling, transportation and applications. Efforts have been made for alleviation including methods on how to avoid these aging effects and development of equipment capable of handling aged pyrolysis liquids with unfavourable fuel characteristics. Therefore, the aim of this study was to explore the rheological properties of phase separated pyrolysis liquid fuel. Two batches of a well – stored poplar wood pyrolysis oils were used for the investigation; one batch was diluted with water to …
Finite Element Modelling And Exergy Analysis Of A Solar Thermal Hollow Fiber Vacuum Membrane Distillation System,
2021
University of Nebraska-Lincoln
Finite Element Modelling And Exergy Analysis Of A Solar Thermal Hollow Fiber Vacuum Membrane Distillation System, Benjamin Shuldes
Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research
A finite element model was developed to investigate the performance of a vacuum membrane distillation module under various operating conditions and membrane parameters. Porosity, tortuosity, pore diameter, membrane thickness, and fiber length were varied along with feed temperature, velocity, and flow configuration. In all cases, boundary layer polarization phenomena were seen to inhibit the performance of the module. At certain conditions, for a 7.5 cm fiber, the reduction in permeate flux from 65 LMH (Liter/m2/h) at the inlet to below 45 LMH at the outlet of the fibers was observed. In most cases, salt concentration polarization was the …
Metabolic Modeling And Omics-Integrative Analysis Of Single And Multi-Organism Systems: Discovery And Redesign,
2021
University of Nebraska-Lincoln
Metabolic Modeling And Omics-Integrative Analysis Of Single And Multi-Organism Systems: Discovery And Redesign, Mohammad Mazharul Islam
Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research
Computations and modeling have emerged as indispensable tools that drive the process of understanding, discovery, and redesign of biological systems. With the accelerating pace of genome sequencing and annotation information generation, the development of computational pipelines for the rapid reconstruction of high-quality genome-scale metabolic networks has received significant attention. These models provide a rich tapestry for computational tools to quantitatively assess the metabolic phenotypes for various systems-level studies and to develop engineering interventions at the DNA, RNA, or enzymatic level by careful tuning in the biophysical modeling frameworks. in silico genome-scale metabolic modeling algorithms based on the concept of optimization, …
Degumming Of Hemp Fibers Using Combined Microwave Energy And Deep Eutectic Solvent,
2021
Louisiana State University and Agricultural and Mechanical College
Degumming Of Hemp Fibers Using Combined Microwave Energy And Deep Eutectic Solvent, Bulbul Ahmed
LSU Master's Theses
Hemp is considered as one of the sustainable agricultural fiber materials. Degumming or surface modification of hemp bast is needed to produce single fibers for ensuing textile and industrial applications. The traditional degumming process necessitates a high amount of alkali, which causes detrimental environmental pollution. This study offers a new method to degum hemp fibers with reduced use of harmful alkali and precious water resources. In this work, hemp bast fibers were degummed by using combined microwave energy and deep eutectic solvent (DES). The properties of hemp fibers manufactured by this method were investigated and compared with the traditional alkali …
Investigation Of Membrane Based Processes For Biomedical Applications,
2021
University of Arkansas, Fayetteville
Investigation Of Membrane Based Processes For Biomedical Applications, Efecan Pakkaner
Graduate Theses and Dissertations
As substantial developments were achieved in nanotechnology and polymer engineering, especially in the last few decades, the use of membranes and membrane-based procedures was found to be expanding into more and more research and development areas; including biological engineering, life sciences and biomedical engineering. Not only have they been the main focus of meaningful research, but they have also been the main pieces of the solutions to very thorny problems encountered within a wide range of applications from microfluidics to water treatment, thanks to their versatility, cost-effectiveness and biocompatibility, when compared to conventional separation techniques. To celebrate and embrace these …
A Portable Point-Of-Care Device Using Joule Heating And Latent Energy Storage For The Temperature Regulation Of Isothermal Nucleic Acid Amplification Tests,
2021
University of Arkansas, Fayetteville
A Portable Point-Of-Care Device Using Joule Heating And Latent Energy Storage For The Temperature Regulation Of Isothermal Nucleic Acid Amplification Tests, Aubrey Lynn Schultz
Graduate Theses and Dissertations
Accurate and early diagnosis of infectious diseases extremely important. Rapid diagnosis allows for effective treatment and increases the chance for recovery without complications. Additionally, the ability to test the populace frequently, swiftly, and affordably significantly aids in containing wide-scale outbreaks. In terms of specificity and sensitivity, nucleic acid amplification tests (NAAT) are one of the best options for diagnosing infectious diseases. Isothermal NAATS present a unique opportunity to create diagnostic tests deployed at a Point-of-Care (POC) level. Specifically, loop-mediated isothermal amplification (LAMP) and recombinase polymerase amplification (RPA) have the potential to deliver reliable POC diagnostics in low-resource settings. When designing …
Creation And Application Of Various Tools For The Reconstruction, Curation, And Analysis Of Genome-Scale Models Of Metabolism,
2021
University of Nebraska-Lincoln
Creation And Application Of Various Tools For The Reconstruction, Curation, And Analysis Of Genome-Scale Models Of Metabolism, Wheaton L. Schroeder
Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research
Systems biology uses mathematics tools, modeling, and analysis for holistic understanding and design of biological systems, allowing the investigation of metabolism and the generation of actionable hypotheses based on model analyses. Detailed here are several systems biology tools for model reconstruction, curation, analysis, and application through synthetic biology. The first, OptFill, is a holistic (whole model) and conservative (minimizing change) tool to aid in genome-scale model (GSM) reconstructions by filling metabolic gaps caused by lack of system knowledge. This is accomplished through Mixed Integer Linear Programming (MILP), one step of which may also be independently used as an additional curation …
Nano-Enhanced Bioremediation For Oil Spills: A Review,
2021
Missouri University of Science and Technology
Nano-Enhanced Bioremediation For Oil Spills: A Review, Amber J. Pete, Bhuvnesh Bharti, Michael G. Benton
Chemical and Biochemical Engineering Faculty Research & Creative Works
Oil seepage and spills have lasting detrimental effects on the environment, especially on nearby marine ecosystems. Despite quick and safe removal of contaminating oil being of utmost importance, remediation methods have remained largely unchanged over the last 20+ years. Removal methods such as skimmers, in situ burning, and sorbents can be difficult to implement in inclement weather. Marine microorganisms consume spilled oil as a primary energy source in a method known as bioremediation. Recently the introduction of nanoparticles to areas contaminated by oil has emerged as a potential method to enhance the efficacy of oil degradation by marine microorganisms. Nanoparticles …
A Gallium-Doped Cement For The Treatment Of Bone Cancers. The Effect Of Zno ↔ Ga2o3substitution Of An Ionomeric Glass Series On The Rheological, Mechanical, Ph And Ion-Eluting Properties Of Their Corresponding Glass Polyalkenoate Cements,
2021
Missouri University of Science and Technology
A Gallium-Doped Cement For The Treatment Of Bone Cancers. The Effect Of Zno ↔ Ga2o3substitution Of An Ionomeric Glass Series On The Rheological, Mechanical, Ph And Ion-Eluting Properties Of Their Corresponding Glass Polyalkenoate Cements, Sunjeev Phull, Alireza Rahimnejad Yazdi, Mark R. Towler
Chemical and Biochemical Engineering Faculty Research & Creative Works
The primary treatment for patients suffering from bone cancers is resection of the tumor followed by reconstruction of the damaged bone. Despite the administration of post-operative chemotherapy, tumor recurrence continues to present itself as a severe complication leading to re-operation. Attempts to incorporate chemotherapeutic drugs into bone cements elicits local toxic effects on healthy bone, which could compromise implant fixation. Alternatively, the local administration of gallium (Ga) may prove to be more effective. This report considers the development of a Ga ionomeric glass series (0.48SiO2-0.355ZnO-0.06CaO-0.08SrO-0.02P2O5-0.005Ta2O5, with 0.01-0.05 mol% substitution for …
A Wirelessly Controlled Scalable 3d-Printed Microsystem For Drug Delivery,
2021
Missouri University of Science and Technology
A Wirelessly Controlled Scalable 3d-Printed Microsystem For Drug Delivery, Farzad Forouzandeh, Nuzhet N. Ahamed, Xiaoxia Zhu, Parveen Bazard, Krittika Goyal, Joseph P. Walton, Robert D. Frisina, David A. Borkholder
Chemical and Biochemical Engineering Faculty Research & Creative Works
Here we present a 3D-printed, wirelessly controlled microsystem for drug delivery, comprising a refillable micro reservoir and a phase-change peristaltic micropump. The micropump structure was inkjet-printed on the back of a printed circuit board around a catheter microtubing. The enclosure of the microsystem was fabricated using stereolithography 3D printing, with an embedded micro reservoir structure and integrated micropump. In one configuration, the microsystem was optimized for murine inner ear drug delivery with an overall size of 19 x 13 x 3 mm3. Benchtop results confirmed the performance of the device for reliable drug delivery. The suitability of the device for …
