Polymer Chemistry Commons^™

Self-Repairable Polymeric Networks: Synthesis And Network Design, Biswajit Ghosh

Dissertations

This dissertation describes the design, synthesis and development of a new class of polymeric networks that exhibit self-repairing properties under UV exposure. It consists of two parts: (a) modification and synthesis of oxetane (OXE), and oxolane (OXO) substituted chitosan (CHI) macromonomer, and (b) design, and synthesis of self-repairing polyurethane (PUR) networks consisting of modified chitosan. Unmodified CHI consisting of acetamide (-NHCOCH₃), primary hydroxyl (-OH), and amine (-NH₂) functional groups were reacted with OXE or OXO compounds under basic conditions in order to substitute the 1° –OH groups, and at the same time, convert -NHCOCH₃ functionalities …

The Effects Of Cure Schedule On Properties Of Glass-Fiber Reinforced Epoxy Matrix Composites, Trevor J. Lee

Materials Engineering

Two different two-component resin systems were cured, via Differential Scanning Calorimetry, for the times recommended by their respective manufacturers. The resin cure schedules were designed to simulate typical and attainable processing conditions; they were cured at 120°F, 140°F, and 160°F, and in-mold post-cured at 200°F, 230°F, and 260°F. The resulting scans were then compared to a baseline cure for each resin system, consisting of two heating-cooling cycles at a constant rate of temperature change. These baseline cures were then used to determine the percent cure of each sample and the shift in glass transition temperature between the baseline cure and …

Artificial Muscle Project: Process Development Of Polydimethyl Siloxane Thin Films For Use In Dielectric Electroactive Polymer Artificial Muscle Actuators, Vincent J. Gayotin, Richard W. Morrison, Paul A. Preisser

Materials Engineering

An artificial muscle design was created founded on the principles of a dielectric electroactive polymer (DEAP), which is fundamentally similar to a capacitor. A polydimethyl siloxane (PDMS)-based elastomer, Sylgard 184 from Dow Corning, was chosen for the design and spun coat onto polystyrene (PS) Petri dishes at varying speeds to create a thin film, using speeds of 2000 rpm, 3000 rpm, 4000 rpm, 5000 rpm, and 6000 rpm. The film thicknesses were measured optically through use of a microscope with coupled computer imaging software to generate a characteristic curve of film thickness to spin speed, achieving a minimum film thickness …

Part A: The Use Of Nonionic Associative Polymers For The Thickening And Emulsifying Of Personal Care Products/ Part B: The Synthesis Of A Manganese Sod Mimetic For Reactive Coatings, Mallory Lynn Mcmahon

Master's Theses

Part A

The use of nonionic associative thickeners was proposed for personal care applications.  Various limitations of current rheology modifiers used in personal care were discussed.  Nonionic associative polymers were examined as both thickeners and emulsifiers.  The structure/property relationship for nonionic polymers and their ability to thicken and emulsify were fully examined.  Results showed an increase in thickening efficiency for nonionic associative polymers with higher log(P) (partition coefficient) values.  This was due to the formation of smaller aggregates and increased bridging between aggregates.  The connection between oil polarity, log(P) of the associative polymer, and emulsion stability showed no relationship however; …

Synthesis And Characterization Of Linear And Branched Polylactic Acid For Use In Food Packaging Applications, Kyle C. Bentz

Master's Theses

Polylactic acid (PLA) resins of various molecular weights and molecular weight distributions were synthesized. Linear, narrow molecular weight distribution (MWD) PLA resins were synthesized, as well as resins containing both high molecular weight branched structures and low molecular weight chains and oligomers. Narrow MWD resins were synthesized for use as adhesives for corrugated paperboard and broad MWD resins were synthesized for use as a waterborne coating. PLA resins were dispersed for use as a waterborne coating. Success has been made at forming films utilizing various plasticizers and surfactants as well as polyvinyl alcohol as dispersing agents. A cold dispersion procedure …

The Preparation Of Functional Surfaces, Philip Thomas Dirlam

Master's Theses

Diels-Alder chemistry was utilized to manipulate the surface energy of glass substrates in reversible manner. Glass slides and capillaries were functionalized with hydrophobic dieneophiles resulting in a  non-wetting surface.  A retro Diels-Alder reaction facilitated by the thermal treatment of the surface’s function to cleave the hydrophobic dieneophile and resulted in the fabrication of a hydrophilic surface. Contact angle (CA) measurements were used as preliminary measurements for monitoring the changes in surface energy exhibited during the initial hydrophobic state (CA - 70±3°), after attachment of the dieneophile creating  a hydrophobic state (CA - 101±9°) followed by reestablishment of the hydrophilic state …

Development And Extrapolation Of An Undergraduate Laboratory Experiment To An Elastomeric Spinal Muscular Atrophy Brace, Richard Sterling Brose

Master's Theses

Ever since the advent of polymer science, polyurethanes have played a huge role in the industrial world. They have been used in endless applications from furniture padding to aircraft coatings, to binders for insensitive munitions. It is therefore important that the chemistry of polyurethanes is well understood as well as the ability to draw relationships between the raw materials selected and the end-use properties of the polymer. Because of the multitude of practical applications, the development of an undergraduate polymer chemistry laboratory focused on polyurethane elastomers is developed and described herein. Polymer chemistry students are exposed to hydroxyterminated polybutadiene (HTPB) …

Modification And Evaluation Of Fuel Cell Membranes, Amol Prataprao Nalawade

Dissertations

The primary goals of this study were modification of existing Nafion^® membranes and characterization of newly developed hydrocarbon-based membranes for high temperature fuel cell applications. Various Nafion^®/silicate nanocomposites were formulated via in situ sol-gel reactions for tetraethylorthosilicate. Different silicate composition profiles generated across membrane cross-sections were investigated by EDAX/ESEM. Composite water uptake, proton conductivity and fuel cell performance were comparable to that of unmodified Nafion^®. Tafel analysis showed better electrode kinetics for composites having more silicate in the middle and less or no silicate at electrolyte-electrode interfaces. All composites showed reduced fuel cross-over and superior …

Photopolymerized Thiol-Ene Networks For Gas Barrier And Membrane Applications, Luke Kwisnek

Dissertations

Gas transport and free volume properties of photopolymerized thiol-ene networks for various applications are reported. For basic, commercially-available thiol-ene formulations, oxygen permeation was strictly dependent on the difference between T_test (room temperature for this work) and network T_g. Networks with T_g near T_test demonstrated the lowest values of permeability, diffusivity, and solubility. A robust, high-barrier network was selected for further modification. New networks with embedded functionality were formed using a two-step approach. Thio-Michael addition of a tetrathiol to monofunctional acrylates formed new functional thiol monomers. These functional thiols were combined with an isocyanurate-based triene and …

Resorbable Polymer-Hydroxyapatite Composites For Bone Trauma Treatment: Synthesis And Properties, Troy E. Wiegand

Department of Chemistry: Dissertations, Theses, and Student Research

Contemporary therapies for hard tissue replacement involve allographs, where the donor and recipient are of the same species, or the use of xenogenic transplants.  Intraspecies materials are often in short supply and interspecies materials are subject to immunological barriers such as disease and tissue rejection.  Synthetic composites are unencumbered by these limitations.  Poly lactic acid (PLLA) and its copolymers have been used in medicine due to their ability to be resorbed by the body without adverse effects.  PLLA’s are currently most commonly used in resorbable sutures and gauzes, but there is increasing interest in using them in conjunction with hydroxyapatite …

Sequencing Of Amine Nucleoside Polymers: Understanding The Fidelity Of Dna-Directed Reductive Amination, Sarah M. Anderson

Honors Student Works

DNA replication is a form of template-directed polymerization that occurs with the aid of numerous enzymes. By developing a DNA replication mimic that can undergo template-directed polymerization without enzymes, the scope of template-directed polymerization will be broadened beyond biological systems. One template-directed polymerization method that has proven successful is reductive amination on a DNA template, a two-step polymerization reaction involving equilibrium imine formation followed by reduction of the imine to the amine. Because DNA-directed reductive amination is an information transfer system, it should proceed with fidelity; however, the extent of fidelity must be explored. These studies will require the ability …

Evaluation Of Stain Blocking Primer Coatings With Low Volatile Organic Compound (Voc) Content And Effects Of Drying Conditions On The Properties Of Water Reducible Coatings For Polypropylene, Megan Alexandra Hart

Master's Theses

The California Air Resources Board (CARB) plans to reduce the volatile organic compound (VOC) limit of specialty primers, sealers, and undercoaters (SPSU), also referred to as stain blocking primers, from 350 g/L to 100 g/L in January of 2012. These coatings are primarily used as stain blocking primers over a variety of substrates, such as wood and drywall. Currently the stain blocking primers that are considered most effective are solvent based primers that contain VOC levels much higher than 100 g/L. The goal of this study is to determine if primers on the market today with a VOC content of …

Micro- And Nanoparticles In Uv-Cured Thin Films, T. Christopher Corkery, Joseph Chan, Mike J. Idacavage, Elizabeth R. Gillies, Paul J. Ragogna

Chemistry Presentations

No abstract provided.

Encapsulation And Release Of Small Molecules From Polymeric Micelles, Monica Boatwright

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Ionic Conductivity And Related Studies In Methyl Cellulose Based Polymer Electrolytes And Application In Supercapacitors., Noor Erwani Azura Shuhaimi

Student Works (2010-2019)

Solid polymer electrolytes based on methyl cellulose (MC) were investigated. Two MC based polymer electrolytes systems were prepared using solution cast technique. These are MC-ammonium nitrate (NH4NO3) system and MC-NH4NO3 system plasticized with poly (ethylene glycol), (PEG). NH4NO3 was chosen as the proton source to make MC, a biodegradable polymer conductive. The room temperature conductivity of pure MC is 3.08 × 10-11 S cm-1. The conductivity is increased up to 2.10 × 10-6 S cm-1 with addition of 25 wt.% NH4NO3. To enhance conductivity of MC-NH4NO3 system, PEG was added to 75MC25AN solution in different concentrations (from 5 to 25 …

Synthesis And Characterization Of Self-Healing Poly (Carbonate Urethane) Carbon-Nanotube Composites, Roger Wesley Bass

USF Tampa Graduate Theses and Dissertations

Synthesis of high molar mass polycarbonate polyurethanes using a novel polyol is described. The resulting elastomers demonstrate excellent mechanical properties as well as the capability to re-heal after rupture without the addition of additives or imbedded healing agents. The self-healing functionality is shown to greatly improve with the addition of up to 1% single and multi-walled carbon nanotubes. The interface of the carbon nanotubes and self-healing polymer are probed using Raman techniques and provide an insight into how the self-healing actions are improved with the addition of carbon nanotubes.

Synthesis of polycarbonate polyurethanes and carbon nanotube composites using a novel …

Synthesis And Physicochemical Properties Of Cationic Microgels Based On Poly(N-Isopropylmethacrylamide), Xiaobo Hu, Zhen Tong, L. Andrew Lyon

Biology, Chemistry, and Environmental Sciences Faculty Articles and Research

Surfactant-free, radical precipitation copolymerization of N-isopropylmethacrylamide and the cationic co-monomer N-(3-aminopropyl) methacrylamide hydrochloride (APMH) was carried out to prepare microgels functionalized with primary amines. The morphology and hydrodynamic diameter of the microgels were characterized by atomic force microscopy and photon correlation spectroscopy, with the effect of NaCl concentration and initiator type on the microgel size and yield being investigated. When a 2,2'-azobis (2-amidinopropane) dihydrochloride (V50)-initiated reaction was carried out in pure water, relatively small microgels (similar to 160 nm in diameter) were obtained in low yield (similar to 20%). However, both the yield and size increased if the reaction was …

Bulk Modulus Of Poly(N-Isopropylacrylamide) Microgels Through The Swelling Transition, B. Sierra-Martin, Y. Laporte, A. B. South, L. Andrew Lyon, A. Fernandez-Nieves

Biology, Chemistry, and Environmental Sciences Faculty Articles and Research

We report measurements of the bulk modulus of individual poly(N-isopropylacrylamide) microgels along their swelling transition. The modulus is determined by measuring the volume deformation of the microgel as a function of osmotic pressure using dextran solutions. We find that the modulus softens through the transition, displaying a nonmonotonous behavior with temperature. This feature is correctly reproduced by the theory of Flory for polymer gels, once the concentration dependence of the solvency parameter is properly incorporated.

Hybrid Micro-/Nanogels For Optical Sensing And Intracellular Imaging, Weitai Wu, Shuiqin Zhou

Publications and Research

Hybrid micro-/nanogels are playing an increasing important part in a diverse range of applications, due to their tunable dimensions, large surface area, stable interior network structure, and a very short response time. We review recent advances and challenges in the developments of hybrid micro-/nanogels toward applications for optical sensing of pH, temperature, glucose, ions, and other species as well as for intracellular imaging. Due to their unique advantages, hybrid micro-/nanogels as optical probes are attracting substantial interests for continuous monitoring of chemical parameters in complex samples such as blood and bioreactor fluids, in chemical research and industry, and in food …

Two-Phase Partitioning System Using Elvax 40w Polymer For The Biodegradation Of Aqueous Phenols, Amit Suresh Ghode

Masters Theses & Specialist Projects

A solid-liquid two phase partitioning system (TPPS) is a new technology platform for destroying toxic organic compounds. TPPS have traditionally been operated by using an immiscible organic phase which partitions organic compounds into the aqueous phase. TPPS using an immiscible organic phase suffers from several limitations such as the organic phase could be biodegradable and hence only certain compatible microbial strains could be used. This therefore, eliminates the desired use of mixed microbial populations for efficient degradation. A solid-liquid two phase partitioning system, in which solid polymeric beads replace liquid organic phase, appears to have benefits over the traditional liquid-liquid …