Polymer Chemistry Commons^™

Preparation And Rapid Analysis Of Antibacterial Silver, Copper And Zinc Doped Sol–Gel Surfaces, Brendan Duffy, Swarna Jaiswal, Patrick Mchale

Articles

The colonisation of clinical and industrial surfaces with microorganisms, including antibiotic-resistant strains, has promoted increased research into the development of effective antibacterial and antifouling coatings. This study describes the preparation of metal nitrate (Ag, Cu, Zn) doped methyltriethoxysilane (MTEOS) coatings and the rapid assessment of their antibacterial activity using polyproylene microtitre plates. Microtitre plate wells were coated with different volumes of liquid sol–gel and cured under various conditions. Curing parameters were analysed by thermogravimetric analysis (TGA) and visual examination. The optimum curing conditions were determined to be 50–70C using a volume of 200ul. The coated wells were challenged with Gram-positive …

Polymers Used In Medicine: Common Types And Benefits Of Drug Delivery Systems, Camille Andrews

Natural Sciences Student Research Presentations

This poster describes the common types and benefits of drug delivery systems.

A Novel Fabrication Technique For Three-Dimensional Nanostructures, Ravi Kiran Bonam

Legacy Theses & Dissertations (2009 - 2024)

Three dimensional micro- and nano-structures are commonly used in the field of Photonics, Optoelectronics, Sensors and Biological applications. Although numerous physical models are developed, a major challenge has been in their fabrication which is commonly limited to conventional layer-by-layer techniques. In this dissertation, a novel method for fabricating three dimensional structures using Electron Beam Lithography (EBL) will be presented.

Chemical Modification On Gold Slides To Gain Better Control Of Patterning Techniques, Ragini Vuppalapati

Masters Theses & Specialist Projects

Nanolithography is a rapidly evolving field that requires new combinations of techniques to improve patterning and to assist in fabricating electromechanical devices. An increasing number of applications require surfaces with defined regions of different chemical functionality. In our previous project optimum conditions for lithographic patterning were determined and potential blockers were identified to reduce force on the tip.

This work is focused on identifying good chemical modifications that will allow better control of basic patterning and to investigate the minimum force of patterning required while using each chemical system. The primary aim is to gain better control of basic pattern …

Adhesion And Durability Of Coatings On Polypropylene Exterior Sidings, Logan Riekio Stark

Master's Theses

Plastics have become a universal material for use in a myriad of commercial and consumer products. One such product, exterior siding, is the focus of this project. Although siding products were originally made from wood, vinyl siding, which offered superior performance, was introduced in the 1950’s. More recently, polypropylene (PP) siding has been introduced; PP provides a stronger product, which allows for deeper patterns and better edge detailing. PP siding, compared to traditional wood siding, doesn’t warp, crack, or degrade as easily with extended exposure to the elements, and is cheaper to maintain. However, even plastic siding must be coated. …

Synthesis Of An Antimicrobial Textile Coating, William M. Morris

Chemistry and Biochemistry

A titania nanosol was synthesized and coated onto nylon/cotton blended textile substrates. The substrates were characterized via SEM for adhesion and nanoparticle formation, then subjected to antimicrobial efficacy tests. The titania nanosol was successfully coated on to textiles samples. Particles were observed to be around 2 by 3 micrometers and formed between the interstitial space of textile fibers. Although larger than typical nanoparticles, the coatings exhibited what seemed to be antimicrobial activity. Titania nanosol coated textile samples were subjected to Kirby Bauer Assay in the presence of S. aureus. The coated textile sample exhibited an inhibition of growth around its …

Opacity Of P(Mma-Maa)-Pmma Composite Latex System With Varying Maa Concentration, Gilbert U. Yu, Jerry T. Dy, Erwin P. Enriquez

Chemistry Faculty Publications

Polymer composites of core-shell morphology are commonly used in the paint industry as opacity enhancer. These are usually made of block copolymer systems wherein the core is formed from a polymer that swells in the presence of a solvent and surrounded by a high glass transition polymeric shell. Thus, upon drying, the swollen regions turn into voids while leaving a hard shell. Here, composites based on poly(methyl methacrylate-butyl acrylate) [P(MMA-BuA)] (seed stage), poly(methyl methacrylate-methacrylic acid) [P(MMA-MAA)] (second stage), and poly(methyl methacrylate) [PMMA] (third stage) were synthesized through a multistage sequential emulsion polymerization and their opacity was investigated. The second stage …

Free Volume Studies Of Various Polymeric Systems Using Positron Annihilation And Pvt-Eos Analyses, Mukul Kaushik

Dissertations

The glass transition phenomenon and free volume behavior below and above the glass transition temperature of various polymeric systems have been investigated. Several novel polymeric systems were considered for this study. Two generations of hyperbranched polyols, H40 and H20, were selected due to large number of hydroxyl groups on the periphery and within the bulk. The effect of hydrogen bonds and molecular weight was related with the glass transition and free volume behavior for the whole range of experimental temperature. The free volume behavior was experimentally studied using PVT and PALS to determine occupied volume, fractional free volume and number …

Development And Utilization Of Digital Image Correlation Techniques For The Study Of Structural Isomerism Effects On Strain Development In Epoxy Network Glasses, Stephen Robert Heinz

Dissertations

The specific aim of this dissertation is to present the findings regarding the effects of molecular structure on macroscopic mechanical performance and strain development in epoxy networks. Network molecular structure was altered through monomer isomerism and crosslink density/molecular weight between crosslinks. The use of structural isomerism provided a pathway for altering mechanical performance while maintaining identical chemical composition within the network. Isomerism was investigated primarily by the curing of diglycidyl ether of bisphenol A (DGEBA) using either the para- or meta-substituted derivatives of diaminodiphenyl sulfone (DDS). Additional insights into isomerism were gained through the investigation of networks composed of either …

Effects Of Molecular Architecture On Fluid Ingress Behavior Of Glassy Polymer Networks, Matthew Blaine Jackson

Dissertations

This manuscript demonstrates the synthesis of glassy polymer network isomers to control morphological variations and study solvent ingress behavior independent of chemical affinity. Well-controlled network architectures with varying free volume average hole-sizes have been shown to substantially influence solvent ingress within glassy polymer networks. Bisphenol-A diglycidyl ether (DGEBA), bisphenol-F diglycidyl ether (DGEBF), Triglycidyl p-aminophenol (pAP, MY0510), Triglycidyl maminophenol (mAP, MY0610), and tetraglydicyl-4,4’-diamino-diphenyl methane (TGDDM, MY721) were cured with 3,3’- and 4,4’-diaminodiphenyl sulfone (DDS) at a stoichiometric ratio of 1:1 oxirane to amine active hydrogen to generate a series of network architectures with an average free volume hole-size (V_h) …

The Investigation Of Asphaltene-Naphithenic Acid And Asphaltene-Surface Interactions, David Tristan Heaps

Dissertations

Asphaltenes represent a ubiquitous problem in the oil industry due to their adverse effects on recovery, production, and processing equipment. These problems have affected oil companies throughout the world, resulting in significant financial losses. In order to expand the existing body of knowledge related to asphaltenes, we have examined how the presence of naphthenic acids contributes to the particle aggregation and sedimentation behavior of asphaltene suspensions as well as how the physics and chemistry of a substrate affect asphaltene adsorption/deposition.

The flocculation of asphaltenes in the presence of naphthenic acids was investigated using dynamic light scattering (DLS), near-infrared spectroscopy (NIR), …

Design Of Covalently Dynamic Films And Coatings: Analysis Of Biocatalyzed Kinetic Behavior In Soft Condensed Matter, Pirro Cipi

Dissertations

Reversibly adjusting surface and bulk properties of materials is advantageous to many applications and will vastly expand current polymer capabilities. A novel strategy was developed to render materials capable of “smart” surface and bulk properties with the aid of embedded biocatalyst and latent functional groups that are selectively activated in the presence of biocatalyst to undergo chemical transformation. The research presented herein focused on systematically characterizing the activity of lipase catalysts embedded in poly (alkyl methacrylate)s simultaneously with functionalized components, either as diffusing within the polymeric matrix or tethered to the matrix. Lipase activity, ester forming (synthetic) or ester breaking …

Synthesis And Characterization Of Acceptor: Donor Block Copolymers For Organic Photovoltaics, Brandon Cory Achord

Dissertations

Mankind needs sources of clean power. Photovoltaic (PV) cells, in use since 1839, have proven reliable and practical for certain applications. PV cell efficiency has changed over the years from 1-2% to ultra-high efficiency cells operating at efficiencies greater than 40%. Organic photovoltaics are a potential transformative technology platform. The potential for cell use, efficiency and cost are all parts of the research and development focus at the time this document was written. This research was initiated with a focus on the synthesis and understanding of the variables effecting acceptor-donor block copolymer. The self-assembled morphology resulting from varying volume ratios …

Physical And Electrical Properties Of Trimetallic Nitride Template Endohedral Metallofullerenes And Their Polymer Nanocomposites, Hanaa Mohammed Ahmed

Dissertations

The main objective of this study was characterization of pure metallic nitride fullerene, MNF, and MNF containing polymers to evaluate these materials as suitable devices for tunable applications. Polymer-fullerene nanocomposites consisting of linear polyurethane (PU) segments crosslinked via polyhydroxylated fullerenes (C₆₀ and Sc₃N@C₈₀, a metallic nitride fullerene) were prepared and characterized for their mechanical and dielectric properties using dynamic mechanical analysis (DMA) and broadband dielectric spectroscopic techniques. Polyhydroxylated fullerenes C₆₀(OH)₂₉ and Sc₃N@C₈₀(OH)₁₈ were synthesized in a high yield through a solid-state high sheer ball-milling procedure and were …

Computational Studies Of Ion Transport In Polymer Electrolytes, Hui Wu

Doctoral Dissertations

Improving ionic conductivity and lithium mobility in polymer electrolytes is important for their practical use for battery electrolytes. In this study, a combination of molecular dynamics and Monte Carlo simulations was used to bring insight into lithium ion transport in poly(ethylene oxide) (PEO) with plasticizers and also next to alumina solid surface doped with lithium salt. The simulations were performed using a moderately high molecular weight polymer (Mn = 10,000 g/mol) at an EO:Li ratio of 15. For the plasticized system, the PEO with LiN(CF3SO 2)2 (LiTFSI) was mixed with 10 wt% plasticizers that included either cyclic ethylene carbonate …

Wetting Properties Induced In Nano-Composite Poss-Ma Polymer Films By Atomic Layer Deposited Oxides, Kyle A. Vasquez, Anita J. Vincent-Johnson, W. Chris Hughes, Brian H. Augustine, Kyoungmi Lee, Gregory N. Parsons, Giovanna Scarel

Department of Physics and Astronomy - Faculty Scholarship

Due to their unique properties, nano-composite polyhedral oligomeric silsequioxane (POSS) copolymer films are attractive for various applications. Here we show that their natural hydrophobic character can become hydrophilic when the films are modified by a thin oxide layer, up to 8 nm thick, prepared using atomic layer deposition. A proper choice of the deposition temperature and thickness of the oxide layer are required to achieve this goal. Unlike other polymeric systems, a marked transition to a hydrophilic state is observed with oxide layers deposited at increasing temperatures up to the glass transition temperature (∼110 °C) of the POSS copolymer film. …

Effects Of Ambient Gases On Icf Target Capsules, Bryan Chambers, Steve Letts, Michael Stadermann

STAR Program Research Presentations

We researched how the chemical and physical properties of a plasma polymer fuel capsule change as they are exposed to ambient gases. The fuel capsules contain the deuterium fuel inside them, they serve as the outer shell for the fuel and act as a ablator for the process. If they are reactive or diffusive with the atmosphere this can change their mass and effect the outcome of the fusion shots performed at the National Ignition Facility where High Powered Lasers are incident upon a gold hohlraum containing a capsule. We discovered that nitrogen and water vapor diffuse into the material …

Synthesis And Structure Of A Substituted Pyridazine, Kiranmai Byrichetti

Masters Theses & Specialist Projects

Pyridazines are heterocyclic compounds with an N-N bond in their ring structure. Heterocyclic aromatic compounds are of great interest as a result of their novel properties and commercial applications. Our current research is focused on the potential role of pyridazines in next generation electronic devices that utilize organics as the semiconducting material. The synthesis of 5, 6-fused ring pyridazines beginning from fulvenes (Scheme 1) is described herein. These fused heterocycles will serve as synthetic models and building blocks for potential organic or organometallic conducting polymers.

Our goal was to modify the route of Snyder et al. previously reported for the …

Introduction To Molecular Motion In Polymers (Book Review), Jeffrey H. Glans

Chemistry & Physics Faculty Publications

A book review by Jeffrey H. Glans.

Pethrick, Richard A., T. Amornsakchai, and A. M. North. Introduction to Molecular Motion in Polymers. Dunbeath, Scotland: Whittles Pub.; Boca Raton, FL: Distributed in North America by CRC, 2011.

ISBN 9781849950084

Precision Synthesis Of Functional Materials Via Raft Polymerization And Click-Type Chemical Reactions, Joel Diez Flores

Dissertations

The need to tailor polymeric architectures with specific physico-chemical properties via the simplest, cleanest, and most efficient synthetic route possible has become the ultimate goal in polymer synthesis. Recent progress in macromolecular science, such as the discoveries of controlled/“living” free radical polymerization (CRP) methods, has brought about synthetic capabilities to prepare (co)polymers with advanced topologies, predetermined molecular weights, narrow molecular weight distributions, and precisely located functional groups. In addition, the establishment of click chemistry has redefined the selected few highly efficient chemical reactions that become highly useful in post-polymerization modification strategies. Hence, the ability to make well-defined topologies afforded by …