Materials Chemistry Commons^™

Zif-67-Derived Ag/Co-Embedded N-Enriched Mesoporous Carbon For Oxygen Reduction Reaction, Zheng-Ling Di, Jing Zhu, Lei Dai, Wei Meng, Yue-Hua Li, Zhang-Xing He, Ling Wang

Journal of Electrochemistry

Nitrogen-doped porous carbon materials are considered as one of the most promising catalysts for oxygen reduction reaction (ORR). Herein, in order to further improve the activity of the nitrogen-doped porous carbon, Ag/Co bimetal is embedded into nitrogendoped porous carbon to form Ag/Co-embedded nitrogen-doped porous carbon material (AgCo@NC). The AgCo@NC was derived by the wet impregnation of Ag+ into ZIF-67 precursor, followed by chemical reduction and a subsequent pyrolysis process under Ar atmosphere at different temperatures (500 ℃, 600 ℃, 700 ℃). The morphologic characterization shows that the Ag/Co nanoparticles were successfully embedded in the mesoporous carbon framework with abundant nitrogen …

Quantitative Detection Of Levofloxacin Hydrochloride By Differential Pulse Stripping Voltammetry With Electrodeposited Bismuth Film Electrodes, Zi-Ying Guo, Zuo-Peng Li, Jiang Li, Jian-Guo Zhao, Feng Feng

Journal of Electrochemistry

In this study, differential pulse stripping voltammetry was developed for the quantitative detection of levofloxacin hydrochloride indirectly. Levofloxacin hydrochloride contains organic amine, which can be precipitated upon interaction with Zn(SCN)₄^2-. By means of differential pulse stripping voltammetry, the concentration of Zn²⁺ can be determined using an in-situ formed bismuth film electrode, which allows determining indirectly the amount of levofloxacine hydrochloride. The linearity equation, I = 1.1401c - 0.5309 with the correlative coefficient R = 0.9979, was presented in the experiment. The results showed that this approach is very sensitive, having a limitation of detection of 3.18 …

Hydrogen Production Of Microbial Electrolysis Cell Using Scrap Metal Net As Cathode And The Analysis Of Microbial Community Structure In Anode, Hong-Yan Dai, Hui-Min Yang, Xian Liu, Xiu-Li Song, Zhen-Hai Liang

Journal of Electrochemistry

In order to find high quality and low price hydrogen catalyst, a scrap metal net was used as single-chamber microbial electrolytic cell (MEC) cathode, and its hydrogen production performance was investigated at different applied voltages. Meanwhile, the microbial community structures of original aerobic activated sludge, MFC and MEC anode microbes were analyzed by 16S rDNA amplicon sequencing technology. As the applied voltage increased, the maximum current density was increased and the running time was shortened. At an applied voltage of 0.7 V, the hydrogen production and electrical energy efficiency obtained with scrap metal mesh cathode MEC were, respectively, 0.330±0.012 m …

Ionic Liquid Assisted Synthesis Of Porous Carbons From Rice Husk For Supercapacitors, Han-Fang Zhang, Feng Wei, Jian Sun, Meng-Ying Jing, Xiao-Jun He

Journal of Electrochemistry

It is still a challenge to prepare carbon materials with high specific surface area at low cost from renewable resources. Herein, the authors report an efficient approach to synthesize porous carbons (PCs) from rice husk with ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate (BMIMPF₆)) as a template and an activation agent. The as-made PCs featured the high specific surface area up to 1438 m²·g^-1. As electrodes for supercapacitors, PCs showed a high specific capacitance of 256 F·g^-1 at 0.05 A·g^-1 in 6 mol·L^-1 KOH aqueous electrolyte and a good rate performance of 211 F·g …

Study On Electro-Sorption Of Heavy Metals And Sulfamethoxazole On Activated Carbon Fibers, Wen-Jun Zhao, Bing-Xin Jia, Ya-Nan Zhang, Jiu-Nian Guan, Jiao Qu, Ying Lu

Journal of Electrochemistry

To study the optimal removal condition, adsorption mechanism and comparative analysis of the three typical cationic pollutants, i.e., Zn(II), anionic pollutant Cr(VI) and molecular pollutant sulfamethoxazole (SMX), using self-made upflowed electro-sorption device for adsorptions of above three pollutants by modified activated carbon fiber were researched. The activated carbon fiber (ACF) was modified by hydrochloric acid. The ACF morphology and structure before and after modification were characterized by SEM, BET and FTIR. The characterization results show that the modified ACF had fewer surface impurities than the modified surface and the gully is more obvious, the specific surface area was increased by …

Electrochemical Cycling Stability Of Polyaniline Films In Different Color Ranges, Kun Xu, Kai-Ling Zhou, Hao Wang, Jing-Bing Liu, Hui Yan

Journal of Electrochemistry

The electrochromic behaviors of polyaniline films were investigated by potential step and cyclic voltammetry coupled with UV viscosity photometer. The polyaniline films show colorful changes from pale yellow to green and then to blue. Electrochromic stability, electrochemical behavior, coloring performance, optical properties and surface formations of the produced films were studied in detail. The working electrode was the flexible PANI electrode, and the counter electrode and the reference electrode were a platinum sheet and Ag/AgCl, respectively. The in situ optical transmittance of the PANI film at 650 nm was measured using an ultraviolet-visible-near-infrared spectrophotometer (Shimadzu UV-3101PC) combining with a square …

Electrochemical Determination Of Trace Copper Ions In Drinking Water Source, Jing-Ji Peng, Hong Zheng, Yi-Song Zou, Guo-Kun Liu, Dong-Xing Yuan

Journal of Electrochemistry

Aiming at the on-site and quick safety evaluation of the dissolved trace copper ions (Cu²⁺) in drinking water source, an electrochemical detection platform was developed on the basis of the square wave anodic stripping voltammetry using the gold nanoparticles (Au NPs) modified glassy carbon electrode, where Au NPs were deposited via electrochemical cyclic voltammetry. The proposed method displayed the limit of detection as low as 1.3 μg·L^-1 in the linear range of 2 ~ 50 μg·L^-1. The proposed method was applied to the determination of Cu²⁺ in the midstream of Minjiang River, one of …

Bipolar-Membrane Electrodialysis Method To Treat Industrial High Saline Perfume Wastewater, Jian Zhang, Dong-Fang Niu, Shuo-Zhen Hu, Xin-Sheng Zhang

Journal of Electrochemistry

Large amount of organic saline wastewater is generated from various chemical industries. The contents of organic saline wastewater are more and more complicated as they are created from different types of industries. Directly discharging the organic saline wastewater without pre-treatment can generate severe environmental problem and waste useful resources. It is necessary to use an economical method to treat the organic saline wastewater and recover the salt into useful materials to achieve resource reuse. Bipolar-membrane electrodialysis (BMED) is one of the methods that can remove salt from the wastewater and convert it into certain acid and base with higher value …

Electrochemical Properties Of Sulfur In Different Carbon Support Materials, Bo Zhang, Jia Liu, Xiao-Chen Liu, De-Jun Li

Journal of Electrochemistry

In order to investigate the effect of carbon structure on electrochemical performance of sulfur/carbon composite in lithium-sulfur battery, in this paper, sublimation sulfur was incorporated into three types of carbon materials, namely, graphene, carbon black and porous carbon. The three sulfur/carbon composites were characterized by scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), and X-ray diffraction (XRD) techniques, and their electrochemical performances were also studied. The results showed that the sulfur/porous carbon composite offered an initial discharge capacity of 1623.2 mA·h·g^-1 and remained 845 mA·h·g^-1 after 100 cycles. Compared with graphene and carbon black, the mesopores and micropores in porous …

Electrochemical Sensor Based On Magnetic Electrode Modified With Magnetic Molecularly Imprinted Nanoparticles Immobilized Hemoglobin For Determination Of Hydrogen Peroxide, Yang Yuan, Jia-Xin Wang, Yu-Hua Cao

Journal of Electrochemistry

In this work, the surface-imprinted technique was used to prepare magnetic hemoglobin (Hb) imprinted nanoparticles, using Fe₃O₄@SiO₂ NPs as the carrier, Hb as the template molecule, and tetraethyl orthosilicate (TEOS) as the imprinted polymer monomer. The nanoparticles had a core-shell structure, with magnetic Fe₃O₄ NPs as the core and Hb imprinted polymers as the shell. Therefore, Hb could be concentrated and fixed on the surface of the magnetic imprinted nanoparticles (MMIPs NPs). Furthermore, MMIPs NPs were immobilized with chitosan (CS) on the surface of a magnetic electrode to constitute Hb enzyme-like biosensor …

An Aptasensor Based On Aunps/Pani/Tnts Nanocomposite For Electrochemical Detection Of Tobramycin, Yong-Ling Nong, Ni-Na Qiao, Ying Liang

Journal of Electrochemistry

A novel well-constructed electrochemical aptamer-based sensor for the detection of tobramycin was presented, using differential pulse voltammetry (DPV) as a detection technique and methylene blue(MB) as an electrochemical indicator. A glassy carbon electrode modified with a nanocomposite of Au nanoparticles/polyaniline/titania nanotubes (AuNPs/PANI/TNTs) was constructed as the electrode scaffold. The nanocomposite was characterized by transmission electron microscopy and X-ray photoelectron spectroscopy in detail. The results of cyclic voltammetry and electrochemical impedance measurements demonstrated that the AuNPs/PANI/TNTs nanocomposites can improve greatly the electron transfer on the interface. For the detection of tobramycin, the DPV results showed a linear relationship between the current …

Hypervalent Iodine Compounds With Carboxylate And Tetrazolate Ligands, Avichal Vaish

Chemistry Theses and Dissertations

In modern organic chemistry, hypervalent (HV) iodine(III) compounds are frequently used as oxidizing agents but application of λ³-iodanes in polymer and material chemistry is still underexplored. This dissertation describes the preparation of dynamic and self-healing materials by employing ligand exchange reactions involving HV iodine(III) compounds of the type ArIL₂ (Ar = Aryl, L = ligand, e.g., carboxylate or (pseudo)halide). These compounds can undergo ligand exchange reactions in presence of nucleophiles (Nu^-) to form ArINu₂. Diacetoxyiodo benzene was successfully employed as a crosslinker to prepare dynamic and self-healing gels derived from carboxylate-containing polymers. Furthermore, …

Polyarylenes: Synthesis And Characterization Towards Advanced Applications, Stephen Budy

Chemistry Theses and Dissertations

A series of semi-fluorinated and non-fluorinated Diels−Alder step-growth polyarylene polymers and co-polymers were synthesized via typical oil bath heating (days/weeks) and more rapid microwave-assisted polymerization (hours). The polymers were characterized by multi-nuclear (¹H, ¹³C, and ¹⁹F) NMR and ATR−FTIR spectroscopy, thermal analysis (TGA, DSC, and DMA), GPC, XRD, water contact analysis (WCA), and refractive index (RI) measurements. The NMR spectra indicated a mixture of para and meta conformations through the polymer backbone increasing to more para with greater fluorine content. Thermal gravimetric analysis revealed the fluorine-containing polyarylenes possessed the highest char yields at almost 80% at …

Preparation Of Folic Acid-Carbon Dots-Doxorubicin Nanoparticles As Targeting Tumor Theranostics, Samson Dada

Electronic Theses and Dissertations

Carbon dots (CDs) have attracted much attention as an excellent gene/drug delivery and biological imaging agent for early cancer theranostics. In this study, we prepared two series of nanoparticles (NPs), which are composed of (CDs) with a targeting agent, folic acid (FA), and a chemotherapeutic agent Doxorubicin (Dox). All the NPs and their intermediates were characterized using ultraviolet-visible spectroscopy (UV-vis), fluorescence spectroscopy, and Fourier transform-infrared spectroscopy (FT-IR). The drug loading capacity (DLC) and drug loading efficiency (DLE) of two series of FA-CDs-Dox were assessed using UV-vis absorption spectroscopy at the wavelength of 485 nm. Both showed good DLE and DLC …

Understanding And Controlling Lithium Microstructure During Electroplating For Energy Applications, Yang Tian

Graduate Theses and Dissertations

Lithium-ion batteries are reaching the specific theoretical capacity limit, while lithium metal batteries are regarded as the ideal energy storage system for the next generation “beyond lithium-ion” battery systems. The lithium metal anode is considered as the “Holy grail” of anodes due to its relatively low electrochemical potential (-3.04 V vs SHE) and high theoretical capacity (3860 mAh g-1). However, the application of lithium metal anodes is hindered because of significant reaction between metallic lithium and electrolytes, as well as uneven electro-plating, which leads to dendrite formation, causing safety problems.

The kinetic parameters of Li ions such as diffusion coefficient …

Development Of Forward Osmosis Based Separations: A Novel Approach In Membrane Technology, Yu-Hsuan Chiao

Graduate Theses and Dissertations

Tackling the worldwide severe water shortage, the membrane technology is considered to be the most efficient approach and hence, used widely as a cost-effective sustainable solution. “Forward osmosis (FO)” has been the major attention in recent time. FO uses osmotic pressure as the driving force to draw the water passing the membrane and achieve the desired separation performance. In general, it is considered to be a process with tremendous potential to resolve the present-day water shortage with extremely low energy consumption. However, the challenges of membrane and draw solution regeneration associated with FO processes must be conquered prior to their …

Study Of Amorphous Boron Carbide And Hydrogenated Boron Carbide Materials Using Molecular Dynamics And Hybrid Reverse Monte Carlo, Rajan Khadka

Graduate Theses/Dissertations

We present a computational study of amorphous boron carbide (a-B_xC) models using Molecular Dynamics (MD) studied with Stillinger-Weber (SW) and ReaxFF potential. The atomic structure factor (S(Q)), radial distribution function (RDF) and bond lengths comparison with other experimental and ab initio models shows that a random arrangement of icosahedra (B₁₂, B₁₁C) interconnected by chains (CCC, CBC) are present in a-B_xC. Afterward, Hybrid Reverse Monte Carlo (HRMC) technique is used to recreate a-B_xC structures. The existing SW potential parameters of Boron are optimized for the α-rhombohedral (Icosahedral B_{12 …}

Conformational Polymorphism In Organic Crystals: Structural And Functional Aspects - A Review, Bidisha Sengupta, Pradeep K. Sengupta, Romans Grant1, Matthew Beasley1, Benjamin Mason1, Tanesha Love1, Larissa Barroso9, Mariela Alvarado9, M S. Zaman

Faculty Publications

Polymorphism in organic crystals involves the formation of isomeric molecular identities. It is dependent on the structural arrangement due to inter-atomic interactions, as well as external stimuli, which include temperature, visible and UV radiation. Conformational polymorphism of organic crystalline molecules is often the result of isomerism due to the twisting and turning of angular bonds. The arrangement of the atoms supports different types of bonding mechanisms (which include hydrogen bonding) within the same compound. This, in turn, results in the formation of cis/trans configurational isomers or a proton transfer species (tautomer), having different functional properties. The conformers support the flexibility …

Performance Of Concrete Made With A Calcined Clay – Limestone-Portland Cement Exposed To Natural Conditions, Fernando Martirena, Ernesto Díaz, Dayran Rocha, Hamed Maraghechi, Karen Louise Scrivener

International Conference on Durability of Concrete Structures

This work presents the results of an investigation carried out to assess durability of concrete made with a calcined clay- limestone-Portland cement with 47% of clinker, hereafter named LC3, produced during an industrial trial in 2013. LC3 was used to cast concrete blocks and later expose them at a natural location at the northern coast of Cuba. Reference concrete was cast with Cuban Portland cement having 88% of clinker. Throughout three years (2015, 2016, 2017) concrete cores were systematically taken and the specimens were subjected to a testing program that included Formation factor, chloride profiling, surface resistivity, air permeability and …

Hierarchical Nanostructuring Of Porous Silicon With Electrochemical And Regenerative Electroless Etching, Ermei Mäkilä, Anne-Mari Anton Willmore, Haibo Yu, Marianna Irri, Mark Aindow, Tambet Teesalu, Leigh Trevor Canham, Kurt W. Kolasinski, Jarno Salonen

Chemistry Faculty Publications

Hierarchically nanostructured silicon was produced by regenerative electroless etching (ReEtching) of Si powder made from pulverized anodized porous silicon. This material is characterized by ∼15 nm mesopores, into the walls of which tortuous 2–4 nm pores have been introduced. The walls are sufficiently narrow that they support quantum-confined crystallites that are photoluminescent. With suitable parameters, the ReEtching process also provides control over the emission color of the photoluminescence. Ball milling and hydrosilylation of this powder with undecylenic acid produces nanoparticles with hydrodynamic diameter of ∼220 nm that exhibit robust and bright luminescence that can be excited with either one ultraviolet/visible …