Laser Ablation In Liquid For The Controlled Production Of Photoluminescent Graphene Quantum Dots And Upconverting Nanoparticles,
2020
University of Kentucky
Laser Ablation In Liquid For The Controlled Production Of Photoluminescent Graphene Quantum Dots And Upconverting Nanoparticles, Rosemary Lynn Calabro
Theses and Dissertations--Chemistry
Photoluminescent (PL) nanomaterials play an important role in areas including displays, sensing, solar, photocatalysis, and bio applications. Traditional methods to prepare PL materials suffer many drawbacks such as harsh chemical precursors, complicated synthetic steps, and production of many byproducts. Laser ablation in liquid (LAL) has emerged as a promising alternative to prepare materials that is single-step, fast, uses fewer precursors, produces fewer side products, and has simple purification steps. During LAL, a solid target is irradiated with a pulsed laser source. The laser pulses cause plasma plumes of the target material to form which are cooled, condensed, and can react …
Uncovering Structure-Property Relationships Of Inorganic Nanomaterials Via Transmission Electron Microscopy,
2020
University of Kentucky
Uncovering Structure-Property Relationships Of Inorganic Nanomaterials Via Transmission Electron Microscopy, Melonie Thomas
Theses and Dissertations--Chemistry
The rapid increase of research in nanoscale devices and nanotechnology in the past few decades has revealed that nanomaterials may possess exceptional properties that are significantly different from the bulk counterpart, due to local rearrangements of the atoms at surfaces and defects. Transmission electron microscopy (TEM) is an indispensable tool when it comes to the characterization of nanomaterials, primarily due to its ability to resolve the local-structure of materials at the atomic-scale. To study dynamic processes, however, regular TEM experiments are inadequate, as they provide only before and after information rather than the real-time data essential to understanding a reaction …
Effects Of Hole Transporting Layers And Surface Ligands On Interface Energetics And Photovoltaic Performance Of Methylammonium Lead Iodide Perovskites,
2020
University of Kentucky
Effects Of Hole Transporting Layers And Surface Ligands On Interface Energetics And Photovoltaic Performance Of Methylammonium Lead Iodide Perovskites, So Min Park
Theses and Dissertations--Chemical and Materials Engineering
Organic metal halide perovskites are promising materials for various optoelectronic device applications such as light emitting diodes (LED) and photovoltaic (PV) cells. Perovskite solar cells (PSCs) have shown dramatic increases in power conversion efficiency over the previous ten years, far exceeding the rate of improvement of all other PV technologies. PSCs have attracted significant attention due to their strong absorbance throughout the visible region, high charge carrier mobilities, color tunability, and ability to make ultralight weight devices. However, organic metal halide perovskites still face several challenges. For example, their environmental stability issue must be overcome to enable widespread commercialization. Meeting …
Synthesis Of Metal Oxide Surface And Interface Arrays By A Combined Solid-Liquid- Vapor/Vapor-Liquid-Solid Approach,
2020
University of Kentucky
Synthesis Of Metal Oxide Surface And Interface Arrays By A Combined Solid-Liquid- Vapor/Vapor-Liquid-Solid Approach, Alexandra J. Riddle
Theses and Dissertations--Chemistry
This project was motivated by an in situ heating experiment in the transmission electron microscope (TEM) in which gold (Au) nanoparticles were observed to dissolve tin dioxide (SnO2) nanowires (NWs) under vacuum. The explanation for this observation was that the high-temperature and low-pressure environment of the TEM caused the reverse reaction of the well-known vapor-liquid-solid (VLS) method commonly used to grow NWs. In the VLS process, a metal catalyst absorbs reactant vapor until it becomes supersaturated. The precipitation of the NW occurs at the liquid-solid interface, which ceases when there is no longer reactant vapor, and the diameter of the …
Interfaces In Lead-Free Tin Perovskite Photovoltaics: An Investigation Of Energetics, Ion Mobility, Surface Modification, And Performance,
2020
University of Kentucky
Interfaces In Lead-Free Tin Perovskite Photovoltaics: An Investigation Of Energetics, Ion Mobility, Surface Modification, And Performance, Alex Boehm
Theses and Dissertations--Chemistry
Halide perovskites have generated tremendous interest as low-cost semiconductors for optoelectronics, such as photovoltaics, lasers, and light emitting diodes due to their extraordinary optical and transport properties. Perovskite photovoltaics in particular have demonstrated a meteoric rise in power conversion efficiencies and drawn considerable interest as a next-generation solar energy technology. The rapid development has centered around lead-based derivatives, and concerns regarding the toxicity of lead has sparked interest in low toxicity and more environmentally friendly perovskite derivatives. In this regime tin (Sn) is regarded as a prominent alternative owing to the ideal bandgap and reduced toxicity exhibited by Sn-halide perovskites. …
Towards The Rational Design Of Organic Semiconductors Through Computational Approaches,
2020
University of Kentucky
Towards The Rational Design Of Organic Semiconductors Through Computational Approaches, Qianxiang Ai
Theses and Dissertations--Chemistry
Though organic semiconductors have illustrated potential as industry-relevant materials for electronics applications, there are few guidelines that can take one from molecular design to functional materials. This limitation is, in part, due to incomplete understanding as to how the atomic-scale construction of the π-conjugated molecules that comprise the organic semiconductors determines the nature and strength of both the noncovalent intramolecular interactions that govern molecular conformation and noncovalent intermolecular interactions that regulate the energetic preference for solid-state packing. Hence, there remain several fundamental questions that need to be resolved in order to design organic semiconductors from a priori knowledge, including: What …
Designing Metal-Halide Perovskites With Enhanced Optical Properties And Stability Using Surface Ligands,
2020
University of Kentucky
Designing Metal-Halide Perovskites With Enhanced Optical Properties And Stability Using Surface Ligands, Md Aslam Uddin
Theses and Dissertations--Chemistry
Metal-halide perovskites (MHPs), with formula ABX3 (A = methylammonium, formamidinium, or Cs+; B = Sn2+ or Pb2+; and X = Cl-, Br-, or I-) are versatile and attractive materials because of their tunable optical and electronic properties. These optical and electronic properties include tunable direct band gaps, high absorption coefficients, low exciton binding energies, relatively high electron and hole mobilities, narrow emission line-widths, and high photoluminescence (PL) quantum yields (ΦPL). Much of the initial excitement around organic metal-halide perovskites focused on their application in photovoltaics (PVs) …
Developing And Testing Redox Active Organic Molecules For Nonaqueous Redox Flow Battery Applications,
2020
University of Kentucky
Developing And Testing Redox Active Organic Molecules For Nonaqueous Redox Flow Battery Applications, Nuwan Harsha Attanayake
Theses and Dissertations--Chemistry
Non-emissive, sustainable energy sources such as solar, wind, and geothermal power have continued to provide an increasing amount of electricity to support electrical grids. Due to the intermittent nature of renewable energy sources like wind and solar, grid energy storage systems must adjust for variations in and mismatches between electricity production and consumption. Among the available energy storage technologies, redox flow batteries (RFBs) are expected to play a critical role in the grid energy storage due to their decoupled energy and power, long service life, and simple manufacturing. However, the worldwide market penetration of RFB systems is still limited due …
Identification Of Adsorbate Ft-Ir Bands Using In-Situ Techniques: Pd Speciation And Adsorption Chemistry Of Pd-Zeolites For Passive Nox Adsorption,
2020
University of Kentucky
Identification Of Adsorbate Ft-Ir Bands Using In-Situ Techniques: Pd Speciation And Adsorption Chemistry Of Pd-Zeolites For Passive Nox Adsorption, Robert Bruce Pace Iii
Theses and Dissertations--Chemistry
To meet increasingly stringent automotive emissions standards, further improvements in catalytic converter design are necessary. Current automotive catalyst systems are effective at eliminating emission of nitrogen oxides (NOx) once the catalyst reaches operational temperature (~200 °C). NOx emitted at lower catalyst temperatures now comprises most of the NOx released during a typical test cycle. Referred to as “the cold start problem” this issue has come to the forefront of automotive catalyst development, as mitigating these emissions is necessary to further reduce automotive emissions. Passive NOx adsorbers present an appealing solution to the cold start problem, …
Determination Of Integrity, Stability And Density Of The Dna Layers Immobilised At Glassy Carbon And Gold Electrodes Using Ferrocyanide,
2020
Technological University Dublin
Determination Of Integrity, Stability And Density Of The Dna Layers Immobilised At Glassy Carbon And Gold Electrodes Using Ferrocyanide, John Colleran, Anna Banasiak
Articles
The technique chosen to immobilise DNA onto electrodes can determine the density and stability of the resultant immobilised layer. DNA‐modified electrodes were prepared using four common DNA immobilisation methods and characterised using ferrocyanide. The negatively charged DNA strands should repel ferrocyanide anions. The DNA layers created using adsorption at glassy carbon electrodes were unstable, while those created through chemisorption of thiol‐modified DNA onto gold electrodes were repeatable and stable, and returned, on average, 94 % repulsion of the probe. The presented results show how the immobilisation protocol, and DNA type, affects the stability, repeatability, and integrity of resultant DNA layers.
The Fabrication And Properties Of Magnetorheological Elastomers Employing Bio-Inspired Dopamine Modified Carbonyl Iron Particles,
2020
Qingdao University
The Fabrication And Properties Of Magnetorheological Elastomers Employing Bio-Inspired Dopamine Modified Carbonyl Iron Particles, Yanfen Zhou, Lele Li, Wenyue Li, Shipeng Wen, Liang Jiang, Stephen Jerrams, Jianwei Ma, Shaojuan Chen
Articles
To obtain magnetorheological elastomers (MREs) with improved mechanical properties and exhibiting an enhanced magnetorheological (MR) effect, bio-inspired dopamine modification has been used to improve the functionality at the surface of carbonyl iron (CI) particles. Various techniques including x-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to confirm that a polydopamine (PDA) layer of about 27.5 nm had been successfully deposited on the surface of the carbonyl iron particles prior to their inclusion in the MRE composites. The magnetic properties of PDA modified CI particles were shown to be almost the same as those …
Enhanced Covalent Interface, Crosslinked Network And Gas Barrier Property Of Functionalized Graphene Oxide/Styrene-Butadiene Rubber Composites Triggered By Thiol-Ene Click Reaction,
2020
Beijing University of Chemical Technology
Enhanced Covalent Interface, Crosslinked Network And Gas Barrier Property Of Functionalized Graphene Oxide/Styrene-Butadiene Rubber Composites Triggered By Thiol-Ene Click Reaction, Long Zheng, Stephen Jerrams, Tian Su, Zongchao Xu, Liqun Zhang, Li Liu, Shipeng Wen
Articles
The high gas barrier property of a rubber composite is of great significance for reducing the exhaust gas emissions due to tire rolling resistance and hence the contribution this factor makes to environmental protection. Enhanced covalent interfaces and crosslinked networks are crucial to the gas barrier property of rubber composites. In this research, γ-mercaptopropyltriethoxysilane (MPS) modified GO (MGO)/styrene-butadiene rubber (SBR) composites were prepared by a synergetic strategy of latex compounding method and thiol-ene click reaction. It was found that the mercapto groups in MGO reacted with the vinyl groups in SBR molecules through thiol-ene click reaction during the crosslinking process …
Observation Of Reduced Thermal Conductivity In A Metal-Organic Framework Due To The Presence Of Adsorbates,
2020
Old Dominion University
Observation Of Reduced Thermal Conductivity In A Metal-Organic Framework Due To The Presence Of Adsorbates, Hasan Babaei, Mallory E. Decoster, Minyoung Jeong, Zeinab M. Hassan, Timur Islamoglu, Helmut Baumgart, Alan J.H. Mcgaughey, Engelbert Redel, Omar K. Farha, Patrick E. Hopkins, Jonathan A. Malen, Christopher E. Wilmer
Electrical & Computer Engineering Faculty Publications
Whether the presence of adsorbates increases or decreases thermal conductivity in metal-organic frameworks (MOFs) has been an open question. Here we report observations of thermal transport in the metal-organic framework HKUST-1 in the presence of various liquid adsorbates: water, methanol, and ethanol. Experimental thermoreflectance measurements were performed on single crystals and thin films, and theoretical predictions were made using molecular dynamics simulations. We find that the thermal conductivity of HKUST-1 decreases by 40 – 80% depending on the adsorbate, a result that cannot be explained by effective medium approximations. Our findings demonstrate that adsorbates introduce additional phonon scattering in HKUST-1, …
Resolving The Puzzle Of Single-Atom Silver Dispersion On Nanosized Γ-Al2O3 Surface For High Catalytic Performance,
2020
Chinese Academy of Sciences, Beijing
Resolving The Puzzle Of Single-Atom Silver Dispersion On Nanosized Γ-Al2O3 Surface For High Catalytic Performance, Fei Wang, Jinzhu Ma, Shaohui Xin, Qiang Wang, Jun Xu, Changbin Zhang, Hong He, Xiao Cheng Zeng
Xiao Cheng Zeng Publications
Ag/γ-Al2O3 is widely used for catalyzing various reactions, and its performance depends on the valence state, morphology and dispersion of Ag species. However, detailed anchoring mechanism of Ag species on γ-Al2O3 remains largely unknown. Herein, we reveal that the terminal hydroxyls on γ-Al2O3 are responsible for anchoring Ag species. The abundant terminal hydroxyls existed on nanosized γ-Al2O3 can lead to single-atom silver dispersion, thereby resulting in markedly enhanced performance than the Ag cluster on microsized γ-Al2O3. Density-functional-theory calculations confirm that Ag atom is mainly …
A Proposed Mechanism To Induce Multi-Layer Polydiacetylene-Coated Filter Color Response To Bacteria
,
2020
Furman University
A Proposed Mechanism To Induce Multi-Layer Polydiacetylene-Coated Filter Color Response To Bacteria , Timothy Hanks
Chemistry Publications
The purpose of this study was to develop a multi-layer diacetylene (PDA)-coated filter and to verify the proposed color response mechanism of PDA-coated filters to bacteria. Unlike other reports which immobilize PDA lipo- somes on solid support or create monolayer Langmuir films, multi-layer PDA-coated filters were generated by directly evaporating organic solvents. Different from incorporating functional headgroups or inserting phospho- lipids into PDA, we reported that bacterial growth can trigger the color change of PDA sensors without any mod- ification or phospholipid insertion. The mechanism that pH change from bacteria metabolites lead to color change of PDA filter was proposed …
Ni-Au Anodic Nano-Electrocatalyst For Direct Glucose Fuel Cells,
2020
The British University in Egypt
Ni-Au Anodic Nano-Electrocatalyst For Direct Glucose Fuel Cells, Islam M. Al-Akraa, Aya S. Abdulhalim Eng, Yassr M. Asal Mr, Ahmad M. Mohammad Prof
Chemical Engineering
This study aims at the sequential assembling of a nickel oxide (NiOx: cauliflower-like nanostructure, 90 nm) and gold (Au; spherical, 95 nm in an average particle size) onto the GC surface nanocatalyst on a glassy carbon (GC) electrode (will be abbreviated as Ni-Au/GC) for the glucose electro−oxidation (GO); the principal anodic reaction in the direct glucose fuel cells (DGFCs). The charge of the Ni deposition on the GC surface (will be abbreviated as Ni/GC electrode) was initially optimized to obtain the highest catalytic activity toward GO which attained at (339.8 Ag−1) by applying 15 mC in the Ni deposition. Yet, …
Morphology Controlled Preparations And Electrochemical Properties Of Znco2O4 Electrode Materials For Supercapacitors,
2019
School of Materials Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003, Jiangsu, China;
Morphology Controlled Preparations And Electrochemical Properties Of Znco2O4 Electrode Materials For Supercapacitors, Yue-Shen Zhou, Meng Li, Shuang Wu, Zhao-Lei Li, Yan-Min Gao
Journal of Electrochemistry
In this work, hydrothermal reaction and high temperature were used to grow ZnCo2O4 active materials on Ni foam. The crystal stuctures and surface morphlogies of four samples were investigated by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). The electrochemical performances were characterized by cyclic voltammetry (CV), galvanostatic charge/discharge (GCD) testing and electrochemical impedance spectroscopy (EIS) on an electrochemical station. It can be seen that active materials tended to form denser stuctures with an increasing amount of NH4F in the solution system and four different morphologies of ZnCo2 …
Electrochemical Behaviors Of Azopurine On Gold Electrodes,
2019
Department of Chemistry,College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005, Fujian, China;
Electrochemical Behaviors Of Azopurine On Gold Electrodes, Ming-Xue Li, Hang Shi, Jia Liu, Meng Zhang, Jian-Zhang Zhou, De-Yin Wu, Zhong-Qun Tian
Journal of Electrochemistry
In this paper, we studied the electrochemical behaviors of azopurine on polished gold electrodes with cyclic voltammetry (CV). On the basis of analyzing scan rate and peak current, it was supposed that the redox process belonged to a reversible process controlled by adsorption in 0.2 mol·L-1 PBS (pH = 4.0 ~ 10.0) solutions. The potentials of redox peaks moved more negatively with increasing pH value. This proved that the H+ proton has participcted in the electrochemical reaction. The further data analysis and the calculation of surface adsorption excess demonstrated that the reaction was a two-proton and two-electron process. …
Polyaniline Coated Hollow Sulfur Prepared Using Sublimate 2,4,6-Tri(Propan-2-Yl)-1,3,5-Trioxane As Template For Sulfur Electrode,
2019
Shanghai institute of space power-sources, Shanghai 200245, China;
Polyaniline Coated Hollow Sulfur Prepared Using Sublimate 2,4,6-Tri(Propan-2-Yl)-1,3,5-Trioxane As Template For Sulfur Electrode, Zhang-Feng Li, Xiao-Rui Wang, Wen-Sheng Tian, Jin-Ze Yang, Ping Zhang, Li-Ping Ma, Yang Chen, Xiao-Li Cui, Zhi-Yu Jiang
Journal of Electrochemistry
An advance method for preparing polyaniline-coated hollow sulfur material using sublimate material ADD(2,4,6-tri(propan-2-yl)-1,3,5-trioxane) as a template was developed for lithium-sulfur battery. At first, the smashed ADD particles were coated by a sulfur layer through the reaction of Na2S2O3 with diluted HCl. Then polyaniline layer was coated again on the surface of sulfur layer through the reaction of aniline with (NH4)2S2O8. After being dried at 60 oC for 12 h, the ADD in such a composite evaporated totally, and resulted in the formation of polyaniline-coated hollow sulfur …
Transient Electrochemical Surface-Enhanced Raman Spectroscopic Study In Electrochemical Reduction Of P-Nitrothiophenol,
2019
Fujian Provincial Key Laboratory of Modern Analytical Science and Separation Technology, Fujian Provincial Key Laboratory of Pollution Monitoring and Control, College of Chemistry, Chemical Engineering and Environment, Minnan Normal University, Zhangzhou, 363000, Fujian, China;Key laboratory for analytical science of food safety and biology, Ministry of Education, College of Chemistry, Fuzhou University, Fuzhou 350116, Fujian, China;
Transient Electrochemical Surface-Enhanced Raman Spectroscopic Study In Electrochemical Reduction Of P-Nitrothiophenol, Yun Ling, Jing Tang, Guo-Kun Liu, Cheng Zong
Journal of Electrochemistry
P-nitrothiophenol (PNTP) is one of the most common probe molecules studied by surface-enhanced Raman spectroscopy (SERS). The research in electrochemical reduction behavior of PNTP will help understanding the mechanism for the nitrobenzene reduction. In this paper, we used transient electrochemical surface-enhanced Raman spectroscopy (TEC-SERS) to study the SERS of PNTP with cyclic voltammetry and chronoamperometry on gold electrodes. The results show that the TEC-SERS provide a time resolution that equals the transient electrochemical methods, and we concluded that the reaction was so quick that we did not observe the spectral information of intermediate species described in the literatures with a …
