Open Access. Powered by Scholars. Published by Universities.®

Systems Science Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 3421 - 3450 of 4159

Full-Text Articles in Systems Science

Effect Of Flow Field Environment On Microstructure Surface Preventing Microorganism Attachment, Chunxi Li, Quanxi Xue, Xiangshan Zhang, Xuemin Ye Nov 2019

Effect Of Flow Field Environment On Microstructure Surface Preventing Microorganism Attachment, Chunxi Li, Quanxi Xue, Xiangshan Zhang, Xuemin Ye

Journal of System Simulation

Abstract: The kinetic characteristics of microorganism model moving in different surfaces and flow field environments are simulated. The internal flow dynamics and the inherent mechanism of antifouling on microstructure surface are examined. The results indicate that for the static flow field, vortices are generated in the micro-pits as microorganism moves above microstructure surface. The velocity in the microstructure surface is greater than that in the smooth surface, and the strain rate and shear stress exerted on microorganism are relatively smaller resulting in the rapid passing the microstructure surface. For the dynamic flow field, the flow field presents regular fluctuations …

Go to article

Simulation Of Gas-Liquid Mixing Flow In A Stirred Tank With Inverted Umbrella-Type Surface Aerator, Wenli Wei, Weili Lou, Panpan Li, Yuling Liu Nov 2019

Simulation Of Gas-Liquid Mixing Flow In A Stirred Tank With Inverted Umbrella-Type Surface Aerator, Wenli Wei, Weili Lou, Panpan Li, Yuling Liu

Journal of System Simulation

Abstract: The way of computational fluid dynamics with k-ε turbulence model as well as multiple reference frame method was used to simulate the hydraulic characteristics of gas-liquid mixing flow in a stirred tank installed with an inverted umbrella-type surface aerator. The inverted umbrella aerator consists of eight blades, and rotates at 5.23rad/s. The main purpose of this simulation is to study the distributions of air volume fraction and characteristics of mixing flow. The simulation results show that the distribution of the mixing flow is symmetrical; the change rules of the gas distribution at different positions along the axis direction are …

Go to article

Dynamic Demand Forecast Of Emergency Materials For Flood Disasters Based On Improved Gm (1,1) Model, Zhongjun Hu, Yanqiu Liu, Li Jia Nov 2019

Dynamic Demand Forecast Of Emergency Materials For Flood Disasters Based On Improved Gm (1,1) Model, Zhongjun Hu, Yanqiu Liu, Li Jia

Journal of System Simulation

Abstract: The sudden and uncertainties of the flood disaster make it difficult to collect large sample data for forecasting the demand of emergency materials quickly and accurately. Based on this, this paper proposes an improved GM (1,1) dynamic forecasting model based on the gray system theory; constructs the dynamic demand model of emergency materials in combination with the inventory management method; and takes the real flood disaster in March 2016 as a case study. The validity of the model proposed in this paper is verified. The results show that the improved GM (1,1) model is feasible and practicable, and …

Go to article

Parameter Optimization Analysis For Double Reheat Units Based On Particle Swarm Optimization, Wenfeng Fu, Haiwen Chen, Lanjing Wang Nov 2019

Parameter Optimization Analysis For Double Reheat Units Based On Particle Swarm Optimization, Wenfeng Fu, Haiwen Chen, Lanjing Wang

Journal of System Simulation

Abstract: The thermodynamic system parameter optimization was established for double reheat ultra-supercritical units. Taking a 660MW unit as an example, some vital parameters including feedwater enthalpy rise distribution, feedwater temperature, reheat steam pressure, number of feedwater heaters and main steam parameter were analyzed based on particle swarm optimization. The result shows the unit thermal efficiency can be further improved by optimizing apparatus interface parameters. The second reheat pressure has more influence on the unit thermal efficiency than the first reheat pressure. When adding the number of feedwater heaters, low pressure heater is a better choice for improving unit thermal efficiency. …

Go to article

Error Control On Unequal Diameter Machining Of Arc Surface Cam, Hu Dongfang, Jianwei Guo Nov 2019

Error Control On Unequal Diameter Machining Of Arc Surface Cam, Hu Dongfang, Jianwei Guo

Journal of System Simulation

Abstract: The effective control for the machining error is an important means for obtaining high precision and high efficiency of the unequal diameter profile machining of the arc surface cam. According to the space meshing principle and the rotation transformation tensor method, the contact line between the tool and the cam is analyzed; the cutter position offset and direction in the machining process are calculated. The actual working profile of the unequal diameter machining cam equation is established. Calculation method of normal error of globoid cam profile is deduced by the principle of differential geometry. The comparison between the …

Go to article

Two-Level Spare Parts Support Effectiveness Evaluation Model Under (S-K, S) Supply Strategy, Songshi Shao, Wei Yong Nov 2019

Two-Level Spare Parts Support Effectiveness Evaluation Model Under (S-K, S) Supply Strategy, Songshi Shao, Wei Yong

Journal of System Simulation

Abstract: Spares are one of the important factors of the operational readiness and the mission success. The (S-K, S) supply strategy is proposed based on the multi-level supply mode according to spares’ reliability and price. Simulation model is established to evaluate the support effectiveness of spare parts by the principle of discrete event simulation. The analytical evaluation model is also established by Gamma distribution characteristics. An approximate model is verified and compared in an example; the results show that the calculation results of the two models are consistent; and the results of approximate model are …

Go to article

Quantity Optimization Of Aircraft Ground Deicing Equipment Based On Flight Dynamics, Bin Chen, Liwen Wang Nov 2019

Quantity Optimization Of Aircraft Ground Deicing Equipment Based On Flight Dynamics, Bin Chen, Liwen Wang

Journal of System Simulation

Abstract: Flight delays and deicing equipment parameter optimization questions were studied aiming at two kinds of typical airport. The formation mechanism of deicing flight delay queue was studied, and the flight delay queue model was proposed corresponding to the departure dynamics of triangle and parabolic shape function. An optimization model of deicing nozzle quantity demand for two typical flight departure dynamics was established aiming at minimizing the flight delay and deicing cost. The nozzle quantity demand optimization model was simulated and verified using deicing flight dynamic data of Beijing International Airport and Harbin Taiping Airport. Simulation results are close to …

Go to article

Extending Lifetime Of Sensor Networks Based On Sleep-Scheduled Routing Algorithm, Zhuojin Pan, Stuart D., Luo Zhen, Yang Hua Nov 2019

Extending Lifetime Of Sensor Networks Based On Sleep-Scheduled Routing Algorithm, Zhuojin Pan, Stuart D., Luo Zhen, Yang Hua

Journal of System Simulation

Abstract: In order to minimize energy consumption of sensor nodes in wireless sensor networks, this paper presents an Energy Efficient Sleep-Scheduled Tree-Based Routing Protocol (EESSTBRP) that modifies the chain formation in PEGASIS to create a set of paired and unpaired nodes in the network based on a distance and sensing range threshold. The paired nodes switch between active and sleep modes so as to remove redundant data and save battery power. To minimize energy consumption as nodes switching between the modes, this scheme considers the transitioning to be done based on a point of near depletion of the nodes’ residual …

Go to article

Ship Speed Optimization Based On Multi-Objective Particle Swarm Algorithm, Jinfeng Zhang, Taoning Yang, Weihao Ma Nov 2019

Ship Speed Optimization Based On Multi-Objective Particle Swarm Algorithm, Jinfeng Zhang, Taoning Yang, Weihao Ma

Journal of System Simulation

Abstract: Ship speed optimization is an effective means to reduce operational costs in the downturn of shipping. To deal with the conflict between reducing the operating cost and reducing the ship emissions, the multi-objective ship speed optimization model is proposed based on the influence of the actual wind and wave. The MOPSO algorithm is introduced to solve the Pareto optimal solution set, and the compromise speed is an effective tradeoff based on the improved TOPSIS algorithm. The operational shipping route is selected as an example to simulate and verify the model. The results show that the operating costs and …

Go to article

Parameter Matching Optimization Of Pure Electric Vehicle Based On Firefly Algorithm, Li Yan, Yigang He Nov 2019

Parameter Matching Optimization Of Pure Electric Vehicle Based On Firefly Algorithm, Li Yan, Yigang He

Journal of System Simulation

Abstract: According to the design requirements and technical index of pure electric vehicle, the parameters of motor and battery related to power and economic performance are selected based on the computing results. Based on ADVISOR, a vehicle model of pure electric vehicle is established in MATLAB environment with the corresponding parameters validating the simulation results. On this basis, the multi-objective function is established, which includes the power performance, economic performance and cost price. This function is optimized by the firefly algorithm, which makes the dynamic parameters, the dynamic performance and economy performance of pure electric vehicle be improved significantly and …

Go to article

Comparison And Analysis Of Output Performance Of Different Pv Structures Under Shadows, Yonghong Xia, Mengru Li, Jianbo Xin, Zen Fanpeng, Yunjun Yu Nov 2019

Comparison And Analysis Of Output Performance Of Different Pv Structures Under Shadows, Yonghong Xia, Mengru Li, Jianbo Xin, Zen Fanpeng, Yunjun Yu

Journal of System Simulation

Abstract: The output power of PV array not only depends on the irradiance intensity of the partial shadows, but also on the shadows shape. For the serious power loss under partial shadows of the traditional SP (Series-Parallel) and TCT (Total-Cross-Tied) structures, an optimized TCT structure is proposed. Output capacity comparison was made based on the three structures in five shadow modes under the circumstances of the severe shadows and uneven irradiation. By using Matlab/ Simulink software, the output performance of the three structures was simulated under different shadow shapes in symmetrical and asymmetric arrays. The results show that PV array …

Go to article

Modified Sparse Quasi - Newton Algorithm For Electrical Capacitance Tomography System, Chen Yu, Zongji Xia, Yujia Zhou Nov 2019

Modified Sparse Quasi - Newton Algorithm For Electrical Capacitance Tomography System, Chen Yu, Zongji Xia, Yujia Zhou

Journal of System Simulation

Abstract: To solve the 'soft-field' nature and the ill-posed problem in electrical capacitance tomography technology, a modified sparse quasi - newton algorithm for electrical capacitance tomography is presented. The mathematical model of modified sparse quasi - newton is derived. The final iteration formula of modified sparse quasi - newton used to adjust the inverse problem solving of the capacitance tomography image reconstruction is given. An iterative formula for ECT inverse problem solving is used for digital simulation experiment. The simulation experiment results are compared with the results of LBP, Landweber, CG, SD, and so on. The results of the analysis …

Go to article

Colored Petri Net Based Modeling On Warship Command And Control Information Flow, Xueguang Zhou, Weidong Lü, Zhimin Yuan Nov 2019

Colored Petri Net Based Modeling On Warship Command And Control Information Flow, Xueguang Zhou, Weidong Lü, Zhimin Yuan

Journal of System Simulation

Abstract: Aiming at the current problems of the complexity, influence of human factors, reusability and others, this paper built a warship command and control (C2) information flow model and obtained the warship C2 model with command and feedback information flow. This paper also defined standard information flow and position structure, and solved the reusing issue. The authenticity of information flow guaranteed the objectivity of this model, which met the demands of different kinds of vessels, and promoted the compactness and fitness between C2 system and warship reality on the model level.

Go to article

Adaptively Resampling 3d Mesh Models Based On Editable Features, Jiajia Dai, Lipeng Fan, Mingyong Pang Nov 2019

Adaptively Resampling 3d Mesh Models Based On Editable Features, Jiajia Dai, Lipeng Fan, Mingyong Pang

Journal of System Simulation

Abstract: We propose a hybrid algorithm for adaptively resampling 3D triangulations by user-defined editable features. The method parameterizes a 3D mesh model into 2D parameter plane, and the geometric properties of the original model is calculated and represented on a planar domain. According to a constructed geometric image of the original model and user-defined editing information, the method creates a global density function for the resampled model. The sampling density function is employed to control distribution of samples in the 2D parameter domain. The method uses centroidal Voronoi tessellation technique to further optimize local distribution of the sampled points. The …

Go to article

Identification And Prediction Of Room Temperature Delay Neural Network Model For Vav Air Conditioning, Xiuming Li, Jili Zhang, Tianyi Zhao, Tingting Chen Nov 2019

Identification And Prediction Of Room Temperature Delay Neural Network Model For Vav Air Conditioning, Xiuming Li, Jili Zhang, Tianyi Zhao, Tingting Chen

Journal of System Simulation

Abstract: Aiming at the problem of mathematical description for dynamic response characteristic of indoor temperature time-delay system, the fundamental principle of neural network model identification is introduced in regulation process of variable air volume (VAV) air conditioning system. Considering the model structure of Elman neural network, this paper presents an optimal selection algorithm for layer delay coefficient in order to determine delay time between indoor temperature and regulation parameters; and a multiple-step prediction model of indoor temperature time-delay system based on Elman neural network is built. The effectiveness of the proposed method is validated through the simulation experiment.

Go to article

Optimum Design For Crankshaft Of Mud Pump Based On Response Surface Model, Liu Jun, Zhang Hong, Huang Hua, Chang Ping Nov 2019

Optimum Design For Crankshaft Of Mud Pump Based On Response Surface Model, Liu Jun, Zhang Hong, Huang Hua, Chang Ping

Journal of System Simulation

Abstract: The mud pump is the heart of an oil rig, and the crankshaft is one of the key components of the mud pump. To achieve the lightweight structural design of the mud pump, it is very important to optimize the structure of the crankshaft. The model is simplified and the structure is analyzed theoretically. The optimization module is used to optimize the parameters;and the response surface model is established. The multi-objective genetic algorithm is used to optimize the design; and the scheme of slotting on the crankshaft flange is put forward according to the production process. Through the simulation …

Go to article

Design And Implementation Of Asd Children’S Cognitive Education System Based On Unity3d, Xuejing Gu, Kaifeng Zhang, Yucheng Guo, Zhiliang Wang Nov 2019

Design And Implementation Of Asd Children’S Cognitive Education System Based On Unity3d, Xuejing Gu, Kaifeng Zhang, Yucheng Guo, Zhiliang Wang

Journal of System Simulation

Abstract: ASD (autism spectrum disorder) is a broad sense of autism. In order to improve cognitive deficits of children with ASD, promote cognitive generalization in ASD children, an education system was designed using Unity3D. The built-in physical engine of Unity3D was used to create a game environment which conformed to the physical laws of the real world by simulating the effects of gravity, buoyancy and collision. The Agent technology and state machine were used to realize the representation and control of virtual scene. Camera and face detection technology were used to realize facial imitative cognitive training. The preliminary test showed …

Go to article

Optimization For Unrelated Parallel Machine Scheduling With Deteriorating Jobs, Xuan Hua, Yingying Qin, Xueyuan Wang, Bailin Zhang Nov 2019

Optimization For Unrelated Parallel Machine Scheduling With Deteriorating Jobs, Xuan Hua, Yingying Qin, Xueyuan Wang, Bailin Zhang

Journal of System Simulation

Abstract: Unrelated parallel machine scheduling problem with deteriorating jobs is studied with the objective of minimizing the maximum completion time. The processing time of a job varies with its beginning time which is denoted as an increasing function of its starting time. It is assumed that each job has its own different deterioration rate on each machine. A mathematical programming model is formulated for the NP-hard problem. An improved genetic algorithm based on two segment coding and self-adaptive adjustment of genetic parameters is then designed to make job scheduling and machine allocation more reasonable. Through the simulation experiments of different …

Go to article

Dbn Method For Risk Assessment Of Dairy Products Cold Chain Logistics, Weijiong Chen, Fan Wen, Xiaolin Zhu, Qimiao Xie, Xiaobei Yin Nov 2019

Dbn Method For Risk Assessment Of Dairy Products Cold Chain Logistics, Weijiong Chen, Fan Wen, Xiaolin Zhu, Qimiao Xie, Xiaobei Yin

Journal of System Simulation

Abstract: Dairy cold chain logistics is a one-way dynamic process. According to the Bayesian theory, this paper considered the transitivity between risks and used the GeNIe software to establish the DBN risk assessment model. The cold chain logistics risk probability of dairy products was evaluated and the sensitivity analysis was carried out. The results revealed that the probability of transportation risk is the highest, and the sensitivity of processing risk is the highest. The processing and the transportation are the key links of the dairy product cold chain logistics. Comparing the results of DBN and the results of static Bayesian …

Go to article

Lpv Controller Design Of Wind Turbine With Maximum Power Point Tracking, Zheng Yang, Dinghui Wu, Zhicheng Ji Nov 2019

Lpv Controller Design Of Wind Turbine With Maximum Power Point Tracking, Zheng Yang, Dinghui Wu, Zhicheng Ji

Journal of System Simulation

Abstract: A design method of the polytopic controller under the maximum power point tracking (MPPT) is proposed in addressing the low efficiency of the wind turbine under rated wind speed and uncertainty of the wind speed. Considering high nonlinearity of the aerodynamic system, the Jacobi linearization and the convex decomposition technique are employed to transform the wind turbine system into a polytopic linear parameter varying (LPV) model with the bias torque of the aerodynamic torque as the scheduling variable. By solving the linear matrix inequalities (LMIs), a polytopic LPV controller is obtained. The simulation results show that the designed controller …

Go to article

Design Of Adaptive Predictive Controller For Superheated Steam Temperature Control, Qian Hong, Yuqing Feng Nov 2019

Design Of Adaptive Predictive Controller For Superheated Steam Temperature Control, Qian Hong, Yuqing Feng

Journal of System Simulation

Abstract: An adaptive model predictive controller for overheating steam temperature control of thermal power plants is designed, which is based on the control object with large delay, large inertia, nonlinearity and strong time-varying properties. Through the on-line identification and control of different models, compared with predictive controllers in a general model, in terms of adjusting the superheat steam temperature, the adjusting time can be shortened drastically, the overshoot can be reduced or even eliminated, and the dynamic performance is improved greatly when applying in adaptive model predictive controller. The results show that the adaptive model predictive controller, because of its …

Go to article

Multi-Seats Collaborative Task Planning Based On Improved Particle Swarm Optimization, Cai Rui, Wang Wei, Jue Qu, Hu Bo Nov 2019

Multi-Seats Collaborative Task Planning Based On Improved Particle Swarm Optimization, Cai Rui, Wang Wei, Jue Qu, Hu Bo

Journal of System Simulation

Abstract: Aiming at the allocation conflict between task and operator of multi-seats collaborative task planning in command and control cabin, a multi-seats collaborative task planning method based on improved particle swarm optimization is proposed. This method describes and analyzes the multi-seats collaborative task and establishes a solution space model based on task sequence. In solving the model, the particle swarm optimization (PSO) was improved by using multi-dimensional asynchronous processing and modifying inertia weight parameters so that the efficiency and local searching ability of the PSO were improved. The example analysis shows that the model and the algorithm can effectively reduce …

Go to article

From Digital Twin To Digital Engineering Modeling And Simulation Entering A New Era, Zhang Bing, Li Xin, Xinxin Wan Nov 2019

From Digital Twin To Digital Engineering Modeling And Simulation Entering A New Era, Zhang Bing, Li Xin, Xinxin Wan

Journal of System Simulation

Abstract: In the digital new era, all kinds of things and even the whole world can be digitized as a model. Simulation activities are conducted for various purposes, and the results can provide intelligent support for various decision-making. Digital twin is an important form of modeling and simulation application in the digital new era; it has been widely used in intelligent manufacturing, factories, buildings, smart cities and many other fields, showing a strong vitality; and its next step in the development direction is a comprehensive digital engineering. This paper reviews the history of the development of digital twin technology, analyzes …

Go to article

Model And Simulation Of Taxi Market With E-Hailing Application, Tian Qiong, Jingtao Zhang Nov 2019

Model And Simulation Of Taxi Market With E-Hailing Application, Tian Qiong, Jingtao Zhang

Journal of System Simulation

Abstract: The emergence and popularity of e-hailing applications offer a new way for taxi drivers and passengers to communicate on line, which not only changes the behaviors of passengers and reduce the idle rate of taxi, but also brings the cost of information for taxis and passengers. Referring to the classic circular city model and combining with the characteristics of new way to take taxis and the cost of information, a model of taxi market with e-hailing application is formulated, which describes the behavior of passengers waiting for idle taxis and taxis cruising for un-served passengers. We provided an algorithm …

Go to article

Signal Control Strategy And Simulation For Vehicles Alternatively Passing Construction Area Of Two-Lane Road, Haipeng Shao, Binbin Zheng, Linxu Long Nov 2019

Signal Control Strategy And Simulation For Vehicles Alternatively Passing Construction Area Of Two-Lane Road, Haipeng Shao, Binbin Zheng, Linxu Long

Journal of System Simulation

Abstract: The construction area of the two-lane roads can form the road bottlenecks easily, leading to the capacity of the road reducing. Aiming to keep the vehicle passing the construction area safely and efficiently, we added the strategy of signal control in the construction area. We built a suitable signal control model for the construction area of the two-lane road. By using the simulation software of Vissim, we established the related simulation models. By using the control variable method to change the simulation parameters and by changing the arrival traffic and speed, we got the influences and rules to the …

Go to article

Semantic Value-Driven 3d Upright Posture Figure Model Transformation, Yangfu Ren, Yuanyuan Pu, Xu Dan, Wenhua Qian Nov 2019

Semantic Value-Driven 3d Upright Posture Figure Model Transformation, Yangfu Ren, Yuanyuan Pu, Xu Dan, Wenhua Qian

Journal of System Simulation

Abstract: In medical equipment, clothing design, film production and computer games, 3D human body model is an indispensable element, but directly obtaining it by means of scanning the human body model does not directly apply in many environments, so we need to moderate deformation model according to the environment. The operation difficulty of the model of deformation is considered, and the deformation effect is achieved. For studying the 3D human body model deformation problem, the deformation of semantic driven model is introduced. Semantic values of height, leg length and shoulder height were obtained by measuring the position of joint points …

Go to article

3d Mesh Editing Method For Virtual Double Eyelid Surgery, Guan Tong, Juntao Ye, Guanghui Ma, Xiaopeng Zhang Nov 2019

3d Mesh Editing Method For Virtual Double Eyelid Surgery, Guan Tong, Juntao Ye, Guanghui Ma, Xiaopeng Zhang

Journal of System Simulation

Abstract: A virtual cosmetic surgery system involves lots of human-computer interactions,and the achieved effects rely on the skills of the operator. Virtual double-fold eyelid surgery is a function that is either missing or implemented with less accuracy in commercial software. To solve these problems, we propose an algorithm that can automatically generate virtual double-fold eyelid path taking advantage of geodesic line. In terms of algorithms, this method adopts a self-adaptive subdivision strategy to avoid losing shapes of the deformation outcomes. Results of experiments show stability, high efficiency and usability of our method.

Go to article

System Analysis Method Based On Simulation Big Data, Guangya Si, Wang Fei, Liu Yang Nov 2019

System Analysis Method Based On Simulation Big Data, Guangya Si, Wang Fei, Liu Yang

Journal of System Simulation

Abstract: Wargaming and exploratory simulation with large-scale simulation systems produce massive simulation data. These data contain many complexity patterns of war, and are significant samples for studying the mechanism of war. Based on the definition of simulation big data, an analysis framework based on simulation big data is proposed, which is divided into three levels: simulation environment and data planning, big data acquisition and storage, and analysis and mining. The simulation data planning and analysis and mining are briefly introduced.

Go to article

Thermodynamic Simulation Of Carbonitride Precipitation In Micro-Alloyed Steel, Weigang Li, Yang Wei, Liu Chao, Baokang Yan Nov 2019

Thermodynamic Simulation Of Carbonitride Precipitation In Micro-Alloyed Steel, Weigang Li, Yang Wei, Liu Chao, Baokang Yan

Journal of System Simulation

Abstract: A mathematical model for calculating the precipitation of carbonitride in the process of hot rolling of composite micro-alloyed steel is established, and the interaction between the carbonitride and AlN is considered. In view of the difficulties of the thermodynamic model that the variables are multiple, the equations are nonlinear and the boundary conditions are determined difficultly, the Newton-Raphson numerical algorithm characterized by coupled problem is adopted. The precipitation starting temperature and precipitation sequence of carbonitride and AlN at different compositions are determined. The equilibrium composition of elements in austenite, the composition and mass fraction of carbonitride precipitates, as well …

Go to article

Application Of Constraint Force Equation Methodology In Aircraft Stage Separation Dynamics Simulation, Yongji Wang, Bangbang Li, Liu Lei Nov 2019

Application Of Constraint Force Equation Methodology In Aircraft Stage Separation Dynamics Simulation, Yongji Wang, Bangbang Li, Liu Lei

Journal of System Simulation

Abstract: The separation process of two-stage aircraft can be divided into three periods: lock-up period, constraint period and detachment period. The guide pins have constraint on two stages, which permit only translation in X-axis direction. To avoid the complex force analysis, the guide pins can be regarded as a joint of one degree of freedom. By adding the constraint and freedom equations to traditional separation dynamics equations, a dynamics model based on constraint force equation (CFE) methodology was built. The constraint force and moment can be obtained by solving constraint force equations. The constraint force equation (CFE) methodology was …

Go to article

First Prev Next Last