Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 30 of 43
Full-Text Articles in Systems Science
Research On Safety Monitoring System For Digital Twin Fully Mechanized Mining Face In Thin Coal Seams, Ya Liu, Zhaoyun Zhang, Cheng An, Canguang Zheng
Research On Safety Monitoring System For Digital Twin Fully Mechanized Mining Face In Thin Coal Seams, Ya Liu, Zhaoyun Zhang, Cheng An, Canguang Zheng
Journal of System Simulation
Abstract: To solve the problems of opaque production processes, difficult expression of production information, and high difficulty in real-time model driving and safety monitoring in fully mechanized mining faces of thin coal seams, studying the use of digital twin technology and risk early warning models to solve beyond-visual-range visual production operations and safety monitoring control of the working face has important theoretical and practical value. This paper studied the construction methods of the digital twin system for fully mechanized mining faces in thin coal seams and discussed the construction of high-precision three-dimensional models, the real-time collection and processing conversion of …
Robot Trajectory Planning And Adjustment Method For Abnormal Pose Of Actuator, Lang Qin, Jiacheng Xie, Xiaojun Qiao, Xuewen Wang, Zhijie Xiao
Robot Trajectory Planning And Adjustment Method For Abnormal Pose Of Actuator, Lang Qin, Jiacheng Xie, Xiaojun Qiao, Xuewen Wang, Zhijie Xiao
Journal of System Simulation
To address the influence of the abnormal pose of the robot actuator on the robot trajectory, an adaptive planning and adjustment method of trajectory based on virtual-real fusion was proposed. AR technology was introduced to couple with the robot kinematics model, and the hardware dependence on multiple sensors was replaced by synchronous comparison of three-dimensional virtual and real poses; AR gestures and voice interaction were combined to simplify the operation process; based on the actual pose of the actuator, the trajectory of the robot terminal axis was dynamically adjusted. The experimental results show that this method breaks through the technical …
State Monitoring Of Nuclear Power Connection Sleeve Quality Inspection Equipment Driven By Digital Twin, Yandong Nan, Jinda Zhu, Xinbin Lu, Zhiying Qin, Dandan Qi, Zhiheng Ding
State Monitoring Of Nuclear Power Connection Sleeve Quality Inspection Equipment Driven By Digital Twin, Yandong Nan, Jinda Zhu, Xinbin Lu, Zhiying Qin, Dandan Qi, Zhiheng Ding
Journal of System Simulation
Abstract: To address the problems of delayed state perception, single monitoring dimension, and insufficient visualization in the quality inspection equipment for nuclear power connection sleeves, a state monitoring method driven by digital twin was proposed. A digital twin-based collaborative state monitoring framework for the inspection equipment was constructed. Based on the OPC UA technology, a multi-source information interconnection model was established. A finite state machine model was employed to discretize and logically drive the inspection process, and a hierarchical verification strategy was proposed to establish a multi-dimensional motion state monitoring mechanism. A surrogate model coupling the radial basis interpolation function …
Design And Application Of Collaborative Simulation System For Satellite Constellation Flight Missions, Dong Yan, Hanzhe Yang, Fangfang Jiang, Chengbao Liu, Peng Zhang
Design And Application Of Collaborative Simulation System For Satellite Constellation Flight Missions, Dong Yan, Hanzhe Yang, Fangfang Jiang, Chengbao Liu, Peng Zhang
Journal of System Simulation
Abstract: To meet the requirements of the collaborative drill for the ground operation and control system of the satellite constellation, as well as the verification and evaluation of in-orbit complex missions, the design ideas and implementation methods of the collaborative simulation system for satellite constellation flight missions were proposed. By adopting the time correction mechanism of the time-scale distributor, the time synchronization problem among the simulation nodes and the operation and control simulation system was solved. By adopting the communication technology based on improved PDXP + UDP, the problem of cross-node data interface and inter-satellite communication simulation was resolved. A …
Virtual Train Operation Platform Based On Digital Twin, Ziying Wang, Congjun Sun, Guihu Li, Tianhao Zhang
Virtual Train Operation Platform Based On Digital Twin, Ziying Wang, Congjun Sun, Guihu Li, Tianhao Zhang
Journal of System Simulation
Abstract: In response to the limitations of traditional train operation simulation modeling, such as simplification, lack of adaptive adjustment capability for parameters, and proneness to error accumulation, a virtual train operation platform based on digital twin technology was proposed. A train model under specific railway lines was constructed. By combining with the intelligent operation and maintenance platform of the railway line, real-time train operation data was obtained and preprocessed. The adaptive chaos optimization algorithm was used to optimize the key parameters of train operation simulation online and establish a digital twin model of the railway line. This model adopted a …
Digital Twin Modeling Method For Bulk Cargo Stacks Based On 2d Lidar, Houjun Lu, Yifei Zhu, Yanping Rong, Wanghui Zhang
Digital Twin Modeling Method For Bulk Cargo Stacks Based On 2d Lidar, Houjun Lu, Yifei Zhu, Yanping Rong, Wanghui Zhang
Journal of System Simulation
Abstract: Due to the characteristics of large equipment, harsh working environment and time-varying shape of the material pile in bulk cargo terminal, there are some disadvantages such as low data accuracy and poor stability when building the storage yard model, which affects the unmanned and intelligent operation control. In this paper, we use two-dimensional laser radar combined with equipment mechanism motion to scan material pile point cloud data, present a digital twin modeling method for bulk storage yard, which includes static scene construction of storage yard and real-time modeling of material pile. Prefabricated models are used for the static scenes …
Research Review Of Intelligent Navigation Simulation Technology And Its Applications, Tao Liu, Hanxi Li, Yong Yin, Jialun Liu
Research Review Of Intelligent Navigation Simulation Technology And Its Applications, Tao Liu, Hanxi Li, Yong Yin, Jialun Liu
Journal of System Simulation
Abstract:Navigation simulation develops models of ship navigation environments and behavior to simulate ship responses under various scenarios, enabling the prediction of ship behavior under complex and disturbing conditions. With the development of computer graphics, virtual reality, and artificial intelligence technologies in recent years, especially the development of unmanned ship technology, new research topics and applications have emerged in navigation simulation technology. This paper introduced the current research status and development trends of navigation simulation technology and reviewed it from three aspects: typical scenarios, key technologies, and development trends. The development trends and key points of multi-dimensional electronic navigation charts, …
Digital Twinned Industrial Robot: Conceptual Framework, Key Technologies, And Case Study, Yongkui Liu, Kang Yang, Benben Tuo, Yaduo Pan, Xinyu Wang, Yihan Wang, Yongqian Gong, Lin Zhang, Lihui Wang, Tingyu Lin, Bin Zi, Yuan Li, Wei You, Xun Xu
Digital Twinned Industrial Robot: Conceptual Framework, Key Technologies, And Case Study, Yongkui Liu, Kang Yang, Benben Tuo, Yaduo Pan, Xinyu Wang, Yihan Wang, Yongqian Gong, Lin Zhang, Lihui Wang, Tingyu Lin, Bin Zi, Yuan Li, Wei You, Xun Xu
Journal of System Simulation
Abstract: To effectively enhance the value and full life cycle management level of industrial robots, this paper integrated deeply digital twin with industrial robots and discussed a new concept, namely digital twinned industrial robot (DTIR). It defined the concept, composition, and typical characteristics of DTIRs and proposed their system architecture. From the perspective of the full life cycle of "design, manufacturing, operation and maintenance, and decommissioning", the key technologies of DTIRs were systematically sorted out. Furthermore, the validity of the proposed conceptual framework was verified through a case study. Finally, the paper summarized the findings and discussed the future development …
Construction Method Of Digital Twin System For High-Low Temperature Test Chamber, Qinghua Chen, Zuoyou Liang, Weijuan Guan, Jiadong Ji, Ping Liu
Construction Method Of Digital Twin System For High-Low Temperature Test Chamber, Qinghua Chen, Zuoyou Liang, Weijuan Guan, Jiadong Ji, Ping Liu
Journal of System Simulation
Abstract: In view of the construction requirements of the digital twin system of the high-low temperature test chamber, the EMQX server with MQTT as the communication protocol is used for data transmission. Driven by real-time data, real-time dynamic interactive mapping between the physical entity and the virtual model is realized. The neural network model and genetic algorithm are used to evaluate and predict the running state of the equipment and provide the system adjustment strategy, so as to realize the whole climate, life and working condition of the staff to understand the running state of the equipment, and effectively ensure …
Research On The Digital Twin Architecture And Application Of Cnc System, Xiyang Zhang, Xusheng Lin, Rui Zhou, Yi Hu
Research On The Digital Twin Architecture And Application Of Cnc System, Xiyang Zhang, Xusheng Lin, Rui Zhou, Yi Hu
Journal of System Simulation
Abstract: In response to the intelligent and digital requirements for virtual debugging, performance evaluation, and machining quality optimization of CNC systems in the field of production and manufacturing, a five dimensional digital twin system of CNC systems combining virtual and real is constructed based on digital twin technology. And combined with relevant new generation information technology, the digital twin system is modeled in multiple fields, including information models, mechanism models, and digital threads, to achieve comprehensive simulation and analysis of physical entities and processing processes. The study also verifies the feasibility of data transmission between CNC systems and digital twin …
Research And Implementation Of Digital Twin System For Mine Drainage Monitoring, Qinghui Wu, Yaqing Bao, Zhongxin Zhao, Xu Huang, Yuchen Wei
Research And Implementation Of Digital Twin System For Mine Drainage Monitoring, Qinghui Wu, Yaqing Bao, Zhongxin Zhao, Xu Huang, Yuchen Wei
Journal of System Simulation
Abstract: The conventional mine drainage monitoring system faces problems such as poor visualization, insufficient linkage, and monotonous real-time monitoring methods for mine drainage in dynamic environments. Combining digital twin technology, a digital twin system for mine drainage monitoring has been developed. Through the construction of digital space, virtual real interaction layer structure framework, and three-dimensional visualization system data architecture, combined with fluid mechanics, using Unity3D development engine and five dimensional model ideas, a three-dimensional visualization system architecture for mine drainage is constructed, achieving various application functions such as real-time monitoring, fault warning, and virtual real mixed control. The feasibility of …
Research On Digital Twin Simulation Method Of Industrial Robot Integrated With Reinforcement Learning, Tianyue Miao, Lu Wang, Jiaxiao He, Nenggang Xie
Research On Digital Twin Simulation Method Of Industrial Robot Integrated With Reinforcement Learning, Tianyue Miao, Lu Wang, Jiaxiao He, Nenggang Xie
Journal of System Simulation
Abstract: In response to the lack of comprehensive functionality and limited application scenarios in the current field of industrial robot digital twin systems, which results in low versatility, a method for constructing a digital twin system for industrial robots with high versatility is proposed. A four-dimensional system architecture for the digital twin is designed, and the components and functions of the four-dimensional system are analyzed, based on the system level planning of the four-dimensional system, the concept of integrating reinforcement learning into the virtual replacement of real concept is defined. By constructing a multi-attribute virtual model and using TCP communication …
Carbon Footprint Analysis And Low-Carbon Optimization Method Simulation Study Of Power Transformer Based On Digital Twin Technology, Dongxue Li, Yan Liu, Boyao Shen, Yongteng Jing, Qiang Ma, Ran Liu
Carbon Footprint Analysis And Low-Carbon Optimization Method Simulation Study Of Power Transformer Based On Digital Twin Technology, Dongxue Li, Yan Liu, Boyao Shen, Yongteng Jing, Qiang Ma, Ran Liu
Journal of System Simulation
Abstract: Power transformers are the main energy-consuming equipment for substations. According to the goal of “carbon peak, carbon neutralization” in China, it is of great significance to accurately calculate the carbon footprint of transformers and seek low-carbon optimization methods. A method for constructing a digital twin model of power transformer magnetic characteristics is proposed. Based on the three-dimensional electromagnetic time-harmonic field finite element analysis method, a threedimensional model of SZ11-31.5MVA/66kV power transformer is established. The transformer loss map is obtained under fluctuating load condition, and the transformer digital twin model is constructed. The carbon footprint of the transformer is analyzed, …
Research On Digital Twin System Of Rockshaft Hoist, Baiting Zhao, Jianguo Shi, Xiaofen Jia
Research On Digital Twin System Of Rockshaft Hoist, Baiting Zhao, Jianguo Shi, Xiaofen Jia
Journal of System Simulation
Abstract: In order to solve the problem of low intelligence and digitization of the current mine hoisting system, a method based on DT for digital modeling, 3D visualization, and virtual real interaction of shaft hoisting machines is proposed. Aiming at the rockshaft hoist system, based on the digital twin five dimensional model framework, we analyze the operating mechanism of the equipment, and model the fully physical digital system of the rockshaft hoist. By constructing multidimensional multi-scale models and multidimensional heterogeneous data models, twin digital scenes are constructed, and virtual real mapping technology is combined to achieve dynamic mapping and virtual …
The Synchronous Grasping Method Of Virtual-Real Assembly Robot Based On Digital Twin, Jian Xu, Gaofeng Liu, Yijian Zhao, Zili Zheng, Huanying Yan
The Synchronous Grasping Method Of Virtual-Real Assembly Robot Based On Digital Twin, Jian Xu, Gaofeng Liu, Yijian Zhao, Zili Zheng, Huanying Yan
Journal of System Simulation
Abstract: A method based on digital twin for assembly robot virtual-real synchronization and grasping is proposed to address the issues of poor intelligent grasping accuracy and difficult data processing in assembly tasks for industrial robots. Based on the digital twin, a digital twin assembly robot virtual-real synchronization and grasping architecture is designed. The OPC UA information model is built by classifying multi-source heterogeneous data, and the OPC UA communication protocol is used as a bridge for data communication of the assembly robot, achieving virtual-real synchronization. The convolutional neural network is further trained using the virtual robot to improve the grasping …
Digital Twin Method Of Stress Field Of Deep Submersible Spherical Shell Based On Simulation Database, Yu Cao, Jie Li, Fang Wang, Zhixiang Liu, Xueliang Wang
Digital Twin Method Of Stress Field Of Deep Submersible Spherical Shell Based On Simulation Database, Yu Cao, Jie Li, Fang Wang, Zhixiang Liu, Xueliang Wang
Journal of System Simulation
Abstract: This paper presents a method for predicting the stress field of deep diving spherical shells based on simulation databases and digital twin technology. By establishing simulation databases of stress field distribution of pressure-resistant spherical shells under different scales and loads, virtual sensing monitoring of stress states in other parts of the vessel is realized through finite sensor layout of pressureresistant shells on the submersible. Based on the DT(digital twin) technology, a three-level virtual structure layer is constructed. The Level-1 DT layer realizes the spatial mapping and cloud image display from the finite element simulation model to the digital model. …
Digital Twin-Driven Structural Thermal Deformation Compensation System For Radio Telescopes, Zhen Lei, Yuhua Liu, Kai Ding, Haoxiang Chen, Dongwei Li
Digital Twin-Driven Structural Thermal Deformation Compensation System For Radio Telescopes, Zhen Lei, Yuhua Liu, Kai Ding, Haoxiang Chen, Dongwei Li
Journal of System Simulation
Abstract: The structural thermal deformation of large-scale radio telescopes under solar thermal load cannot be measured in real-time and compensated dynamically. To solve this problem, a digital twin-driven structural thermal deformation compensation method and system is studied. Based on the fusion of measured data and simulation data, a temperature field modeling method is proposed. A simulation and prediction model of structural thermal deformation is established, and a dynamic compensation model of structural thermal deformation is built. A digital twin-driven dynamic structural thermal deformation compensation system for radio telescopes is developed. A micro-experimental model is studied to verify the effectiveness of …
Digital Twin Modeling And Control Of Robots For Intelligent Manufacturing Scenarios, Ying Li, Lan Gao, Zhisong Zhu
Digital Twin Modeling And Control Of Robots For Intelligent Manufacturing Scenarios, Ying Li, Lan Gao, Zhisong Zhu
Journal of System Simulation
Abstract: The introduction of Industry 4.0 and the Made in China 2025 development policy has accelerated the transformation of the manufacturing industry from automation to intelligence. Industrial robots, as the representative equipment of intelligent manufacturing, will also become more intelligent. Based on digital twin technology, digital modeling, and simulation debugging are conducted for such problems as interference and collision, tedious operation, and low efficiency of industrial robot spot welding debugging in production. Process Simulate from TECNOMATIX software is utilized to digitally model the robot spot welding station and define its motion, and TIA Portal and S7-PLCSIM Advanced are applied to …
Asl-Catboost Method For Wind Turbine Fault Detection Integrated With Digital Twin, Hongtao Liang, Lingchao Kong, Guozhu Liu, Wenxuan Dong, Xiangyi Liu
Asl-Catboost Method For Wind Turbine Fault Detection Integrated With Digital Twin, Hongtao Liang, Lingchao Kong, Guozhu Liu, Wenxuan Dong, Xiangyi Liu
Journal of System Simulation
Abstract: In view of the low visibility of the current wind farm status monitoring and insufficient realtime operation and maintenance, based on the concept of digital twin five-dimensional model, the framework of wind farm digital twin five-dimensional model is constructed. Aiming at the insufficient fault detection capability of traditional algorithms and unbalanced positive and negative samples in fan fault data set, the improved ASL-CatBoost algorithm is proposed to achieve the accurate detection of fan fault status. Based on the digital twinning platform, combined with MATLAB/Simulink, the simulation mathematical model of doubly-fed wind turbine under the condition of blade mass imbalance …
Dynamic Digital Twin Modelling And Semi-Physical Simulation Of Wind Turbine Operation, Yang Hu, Weiran Wang, Fang Fang, Ziqiu Song, Yuhan Xu, Jizhen Liu
Dynamic Digital Twin Modelling And Semi-Physical Simulation Of Wind Turbine Operation, Yang Hu, Weiran Wang, Fang Fang, Ziqiu Song, Yuhan Xu, Jizhen Liu
Journal of System Simulation
Abstract: For the accurate mapping and real-time simulation requirements proposed by digital twin technology, a multi-input multi-output (MIMO) finite difference domain-hybrid semi-mechanical (FDDHSM) digital twin modeling method is proposed, and a semi-physical simulation system of wind turbine digital twin with physical controller is established for the complex nonlinear operation characteristics of large wind turbines. The integrated dynamic MIMO-FDD-HSM model structure is constructed. Finite difference regression vectors are defined to characterize the operating conditions of the wind turbine, and finite difference space tight convex partitioning, parametric model identification, and non-parametric model training are completed under full operating conditions. The wind turbine …
Recursive Subspace-Based Model Refinement Method For Digital Twin Of Thermal Power Unit, Yanbo Zhao, Yuanli Cai, Huaizhong Hu
Recursive Subspace-Based Model Refinement Method For Digital Twin Of Thermal Power Unit, Yanbo Zhao, Yuanli Cai, Huaizhong Hu
Journal of System Simulation
Abstract: Due to factors such as simplified assumptions or equipment characteristic deviation, modeling errors are inevitable in the mechanism modeling of thermal power units. To deal with the problem, this paper proposes a novel model refinement method based on recursive subspace for the digital twin of thermal power units. Firstly, the digital twin models are built based on mechanism analysis and combined with small sample data of typical conditions, ensuring interpretability and generalization performance. Secondly, based on the recursive subspace identification method, the refinement model is built and updated online in real time to compensate for the modeling error, improving …
Intelligent Airport Crowd Management Technology Based On Digital Twin, Jinghui Zhong, Yutian Lin, Wenqiang Li, Wentong Cai
Intelligent Airport Crowd Management Technology Based On Digital Twin, Jinghui Zhong, Yutian Lin, Wenqiang Li, Wentong Cai
Journal of System Simulation
Abstract: Given the need for intelligent emergency control and management of airport crowds, a smart control scheme for airport crowds based on digital twin is proposed. The scheme constructs an integrated crowd control system framework with four dimensions, including digital layer, modeling layer, functional layer, and application layer. It discusses and demonstrates the application effect of five important application modules. By using a data-driven crowd simulation model and intelligent optimization algorithm, the proposed scheme realizes the dynamic prediction and control optimization of the airport crowd status. The scheme can effectively improve the efficiency and intelligence level of airport crowd control …
Visual Monitoring System Of Digital Twin Workshop For Process Manufacturing, Yanchao Yin, Jiasheng Feng, Bin Yi, Wang Li, Qingwen Yin
Visual Monitoring System Of Digital Twin Workshop For Process Manufacturing, Yanchao Yin, Jiasheng Feng, Bin Yi, Wang Li, Qingwen Yin
Journal of System Simulation
Abstract: To solve the problem of poor real-time and accuracy of process manufacturing monitoring, this paper proposes a visual monitoring system architecture of digital twin workshop based on production factor data, production process, and multi-process equipment entity object amid the rapid development of digital twin technology and increasingly close integration with the manufacturing industry. Twin modeling is conducted on multi-process coupling production line entity objects from multiple dimensions such as element, state, and operation logic. Based on key technologies of data collection and transmission of OPC UA (OLE for process control unified archiecture) unified architecture and real-time drive of the …
Automatic Target Recognition Of Substation 3d Scene For Digital Twin, Qian Tu, Jun Li, Dongliang Fan, Qi Kong, Jie Shen
Automatic Target Recognition Of Substation 3d Scene For Digital Twin, Qian Tu, Jun Li, Dongliang Fan, Qi Kong, Jie Shen
Journal of System Simulation
Abstract: In order to improve the accuracy of automatic target recognition and promote the effect on substation operation and maintenance, automatic target recognition of substation 3D scene for digital twin is proposed. The automatic target recognition model for the three dimensional scene of the substation is constructed. The perception module of the model is used to collect the real-time status data of substation, and the communication module is used to transmit the data to digital twin modules. This module, based on the received data information, realizes the deep fusion and panoramic mapping of substation information through the knowledge base constructed …
Research On Digital Twin Data Modeling And Evaluation Method Of Automated Container Terminal, Guoxuan Xu, Daofang Chang, Jiaqi Li, Qiang Ling
Research On Digital Twin Data Modeling And Evaluation Method Of Automated Container Terminal, Guoxuan Xu, Daofang Chang, Jiaqi Li, Qiang Ling
Journal of System Simulation
Abstract: To make full use of the massive operation data of automated container terminals and further realize the digital and intelligent transformation of terminals driven by digital twin, a method for digital twin data modeling and effect verification and evaluation of automated container terminals is proposed. The application framework and operation mechanism based on digital twin are studied. Based on the data processing logic of digital twin framework, a method of terminal operation process evolution and dynamic data modeling based on digital twin is proposed. To verify whether the data could meet the effective operation of the digital twin, a …
Development Of Several Typical Virtual Reality Fusion Technologies, Qiqi Feng, Zhiming Dong, Wencheng Peng, Yi Dai, Bingshan Si
Development Of Several Typical Virtual Reality Fusion Technologies, Qiqi Feng, Zhiming Dong, Wencheng Peng, Yi Dai, Bingshan Si
Journal of System Simulation
Abstract: Virtual reality fusion can realize the two-way interaction, mapping and linkage between virtual world and physical world, which attracts the attention of countries in the world. In order to sort out and make statistics on concept connotation, academic status and application of the related new technologies, digital twin, cyber-physical systems, metaverse and live-virtual-constructive simulation are taken as representatives. The comparison on the development process, functional characteristics, target trends, etc. is carried out.
Application Of Virtual-Real Simulation In Military Field, Ziquan Mao, Jialong Gao, Jianxing Gong, Quan Liu
Application Of Virtual-Real Simulation In Military Field, Ziquan Mao, Jialong Gao, Jianxing Gong, Quan Liu
Journal of System Simulation
Abstract: The definition and content of the virtual-real simulation are presented. According to different technical ideas, the development status and existing problems of virtual-real simulation are summarized from three aspects of digital twin, live-virtual-constructive (LVC) simulation, and parallel system. The similarities and differences, as well as the advantages and disadvantages of the three methods are analyzed and compared, and their main application fields are discussed. In order to deal with difficulties encountered in military training, operational tests, equipment development, and equipment maintenance, a solution based on virtual-real simulation is proposed by means of theoretical guidance, case comparison, and transfer and …
Key Technology And Application Of Digital Twin Modeling For Mri, Shanshan Chen, Hongzhi Wang, Tian Xia
Key Technology And Application Of Digital Twin Modeling For Mri, Shanshan Chen, Hongzhi Wang, Tian Xia
Journal of System Simulation
Abstract: With the accelerating digitalization in education, the construction of digital resources and application platforms has caught increasing attention. The framework of MRI equipment digital twin fivedimensional model is constructed to solve the problems in teaching and training for magnetic resonance imaging (MRI). A modeling and simulation method based on the mechanism model is proposed. The multi-dimensional physical data are obtained to perform digital human modeling, and the virtual acquisition and image reconstruction method is proposed to generate images. The digital twin data are adopted for iterative optimization to implement the whole process of the three-dimensional visual operation including preparation …
Construction And Application Of Digital Twin System For Optical Fiber Secondary Coating Workshop, Biao Yuan, Yourui Huang, Shanyong Xu, Xue Rong
Construction And Application Of Digital Twin System For Optical Fiber Secondary Coating Workshop, Biao Yuan, Yourui Huang, Shanyong Xu, Xue Rong
Journal of System Simulation
Abstract: In order to solve the problem that the current optical fiber secondary coating workshop has inferior intelligence and low digital degree, a three-dimensional (3D) visual monitoring and fault diagnosis method for the optical fiber secondary coating workshop based on digital twin (DT) is proposed. In view of the equipment in the optical fiber secondary coating workshop, combined with the workshop production process and equipment operation mechanism, the digital modeling of all physical properties of the optical fiber secondary coating workshop is carried out, and the virtual twin scene is constructed. Real-time mapping between the virtual workshop and the physical …
Monitoring Method Research On Passenger Behavior On Escalator Based On Digital Twin, Nan Lü, Qibing Wang, Lu Jiawei, Juntong Chen, Gang Xiao
Monitoring Method Research On Passenger Behavior On Escalator Based On Digital Twin, Nan Lü, Qibing Wang, Lu Jiawei, Juntong Chen, Gang Xiao
Journal of System Simulation
Abstract: In order to solve the problems that the traditional escalator cannot be monitored and analyzed in real time during operation, the management and maintenance only on escalator equipment side, and the lack of monitoring passenger dangerous behavior, a monitoring method of passenger behavior on escalator based on digital twin is proposed. By constructing the digital twin of escalators, a visual interface is designed to map the escalator running status and passenger behavior data. Through passenger video surveillance, the improved OpenPose posture recognition algorithm is used to obtain the key point data of human body. Posture recognition is classified to …