Industrial Technology Commons^™

The Effect Of Reliability Consideration On The Application Of Quality Index, Hamid Seifoddini, Manocher Djassemi

Industrial Technology and Packaging

Quality index (QI) has been proposed as a screening mechanism for machine-part matrices in the development of cellular manufacturing systems. In this paper the effect of reliability consideration on the application of QI and the relative sensitivity of job shop and cellular manufacturing systems to reliability changes are evaluated by simulation modeling. Performance measures such as mean flow time and work-in-process inventories are used in the comparative study of job shop and cellular manufacturing.

Re-Engineering Of The Quality Assurance Process Using Work Study Methodology, Yew Hoong Chia

Student Works (2000-2009)

This project paper explores the application of Work Study methods to improve the manufacturing processes in the current semiconductor manufacturing environment. The scope of the project is narrowed down to the Quality Assurance Out-going Final Inspection (QA OFI) Gate process step at the End-Of-Line (EOL) Operations in Motorola Malaysia Sendirian Berhad. This QA OFI Gate process step had recently become a bottleneck to the total EOL operations and in need of productivity improvement. It was observed that Work Study methods were not being used extensively or applied in a systematic manner in the company being studied. Many changes were made …

The Determination Of Failure Occurring In The Stator Coil Winding Due To The Over-Voltage Using Matlab Software, Ali Reza Alavizadeh

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science & Technology at Morehead State University in partial fulfillment of the requirements for the degree of Master of Science in Vocational Education & Technology by Ali Reza Alavizadeh on December 1, 2000.

An Efficient Cnc Programming Approach Based On Group Technology, Manocher Djassemi

Industrial Technology and Packaging

Many studies and reports support the significant impact of the application of group technology on various aspects of product design and manufacturing. The fact that group technology is the common solution to similar problems is the main source of such impact. In this paper, one of the less frequently utilized features of CNC technology known as parametric part programming is used to implement the common solution feature of group technology in processing a set of similar parts. Using three part families, the advantages of blending the concept of group technology and parametric programming for CNC machining operations are illustrated. The …

A Strategic Analysis Of Powder Coating Industry In Malaysia : A Case Study Of Ici-Nof Powder Coatings (M) Sdn. Bhd, Meng San Tay

Student Works (2000-2009)

The powder coating industry in Malaysia has increasingly replaced the traditional liquid paints in metal-based industries due to its environmental friend liness, governmental legislation and improved technology. The powder coating industry had grown steadily in the early 1990's in tandem with the Malaysian economic performance. The high growth rate of the industry has attracted new entrants to set up manufacturing plants in the country. However, the unprecedented currency crisis in 1997 has drastically reduced the market size and demand. Faced with an overcapacity scenario, the players are scrambling for market shares by competing heavily in price. The research aims to …

Pre-Inoculation Effect Of Sic In Production Of Thin Wall Ductile Iron Castings, Nikolay Y. Laukhin

Dissertations and Theses @ UNI

Pre-inoculation effect of SiC additions and its effect on castability, microstructure, and magnesium recovery in thin wall ductile iron plates have been studied. Experimental results were compared with alternative FeSi75 furnace pre-inoculation additions.

The first series of experiments aimed to set the baseline of iron quality, when using FeSi75 pre-inoculant

In the second series of experiment, different methods of introduction of Sic into liquid iron were studied. It was established that Sic added into the stream during the tapping into the flow-through chamber or added directly into the flow-through chamber produced lower Si recovery. The most effective method of introduction …

A Parametric Programming Technique For Efficient Cnc Machining Operations, Manocher Djassemi

Industrial Technology and Packaging

In this paper the application of parametric programming to CNC machining is discussed. As one of the less frequently utilized features of CNC machines, parametric programming has the potential to increase the efficiency of CNC operations. This feature is particularly beneficial to companies with group technology manufacturing where parts with similar design or operational requirements are processed within a machine cell. Using two case studies, the capabilities of parametric programming for CNC machines are illustrated.

Determination Of A Flexibility Range For Cellular Manufacturing Systems Under Product Mix Variations, Hamid Seifoddini, Manocher Djassemi

Industrial Technology and Packaging

One of the underlying assumptions in cellular manufacturing is that product mix is relatively stable over time. In this paper, a procedure for the sensitivity analysis of the performance of a cellular manufacturing system with respect to changes in the product mix is presented and a flexibility range representing the capability of the system in dealing with these changes is determined using simulation modelling. The simulation results in this study show that as the changes in the product mix increase the superiority of the performance of the cellular manufacturing system to the corresponding job shop system diminishes.

Minimizing Post-Production Weight Growth In Tanks Using A Decision Analysis Model, Michael F. Cochrane

Engineering Management & Systems Engineering Theses & Dissertations

Post-production weight growth of tanks is an historic problem for the military. Tanks are difficult to transport because of their weight, and post-production modifications tend to cause this weight to increase over the lifecycle of the tank. In this thesis, a computer model is constructed which uses influence diagrams to model tank weight growth as a probabilistic process. Historical weight data for the MI Abrams tank program is used to derive probabilities for the model. The model is used to predict tank weight growth over both the short and long term with the goal of understanding more about how and …

Lithographers' Opinions About Waterless Lithography, Devang Pranlal Mehta

Dissertations and Theses @ UNI

The purposes of this study were to identify the advantages and disadvantages of waterless litho in comparison with traditional litho, to solve the controversial issues, to forecast the growth of waterless litho, and to inform graphic arts professionals about it. The problem of this research was to identify and measure perceived controversial issues for using the waterless litho process. These controversial issues were related to the return on investment and operating costs involved, productivity, quality of images, eco-friendliness, and technical problems associated with waterless litho.

Due to the fact that waterless litho was a developing technology and some controversial issues …

Perceptions Of Businesses On Environmental Regulatory Information, Kimberly K. Gunderson

Dissertations and Theses @ UNI

The purpose of this study was to determine the source and amount of information that a sample of businesses receive on environmental regulatory topics and from what sources they would prefer to receive this information. More specifically, the study demonstrated the discrepancy between the sources from which businesses currently receive their information and the sources from which they would prefer to receive it. The study also addressed how relevant this information was to the businesses and with which regulations the businesses were the most and least knowledgeable. The study was done by conducting a mail-back survey of 500 Iowa small …

The Threshold Value Of A Quality Index For Formation Of Cellular Manufacturing Systems, Hamid Seifoddini, Manocher Djassemi

Industrial Technology and Packaging

The superiority of cellular manufacturing to job shop manufacturing has been questioned by a number of simulation studies. The initial structure of the machine-part matrix seems to play an important role in the failure of cellular manufacturing systems in these studies. In this paper a grouping measure called 'quality index - QI' will be used to evaluate the relationship between the quality of a machine-part matrix and the performance of the corresponding cellular manufacturing system. A simulation study will be conducted to demonstrate how the procedure can be used to determine the threshold value for QI beyond which the cellular …

Digital Rosetta Stone: A Conceptual Model For Maintaining Long-Term Access To Digital Documents, Steven B. Robertson

Theses and Dissertations

Due to the rapid evolution of technology, future digital systems may not be able to read and/or interpret the digital recordings made by older systems, even if those recordings are still in good condition. This thesis addresses the problem of maintaining long-term access to digital documents and provides a methodology for overcoming access difficulties due to technological obsolescence. A review was conducted to determine the long-term access methods that have already been suggested by other researchers. These previously suggested methods are then combined with other ideas that were encountered and conceived while performing research for this project. The combination of …

Sensitivity Analysis In Cellular Manufacturing System In The Case Of Product Mix Variation, Hamid Seifoddini, Manocher Djassemi

Industrial Technology and Packaging

In this paper, performance measures such as mean flow time and work-in-process inventories will be used to determine the changes in the performance of a cellular manufacturing system due to product mix variations.

Improving The Performance Of Cellular Manufacturing By A Dynamic Part Assignment Approach, Hamid Seifoddini, Manocher Djassemi

Industrial Technology and Packaging

In this paper, a simple dynamic part assignment (DPA) procedure is introduced and its effects on the performance of cellular manufacturing systems is evaluated. In this procedure rerouting of parts among machine cells is allowed for better machine utilization. Three data sets are used to compare the performance of manufacturing systems under job shop and cellular manufacturing when DPA is employed. The results of simulation runs indicate that the proposed DPA method improves the performance of cellular manufacturing significantly by reducing the congestion in machine cells with long waiting lines.

Reaction Based Grasp Force Assignment, Mark W. Hunter

Theses and Dissertations

An iterative method is developed by which the contact forces required to apply an arbitrary wrench (six elements of force and moment) to a stably grasped object may be calculated quickly. The assignment of contact forces, given a required object wrench, is accomplished with the use of fuzzy logic. This concept is referred to as the fuzzy logic reactive system (FLRS). The solution is versatile with respect to goals inherent in the rulebase and the input parameters, and is also applicable for an arbitrary number of contacts. The goal presented in this research, to illustrate the concept of the FLRS, …

A New Grouping Measure For Evaluation Of Machine-Component Matrices, Hamid Seifoddini, Manocher Djassemi

Industrial Technology and Packaging

The machine-component matrix is the main input to most machine-component grouping models used in cellular manufacturing. A number of measures have been developed for performance evaluation of machine-component grouping algorithms. In this paper, the relationship between these measures and the performance of the corresponding cellular manufacturing system is evaluated and a new grouping measure is developed which is more consistent in predicting the suitability of a manufacturing system for cellular manufacturing.

Ultrasound Modified Ferric Hydroxide/Cupric Ion Adsorption And Sequestration At Varying Ph Levels, Humberto Campos

Dissertations and Theses @ UNI

This study was undertaken to determine if hydrous metal oxide adsorption, an important treatment method used to remove adsorbates from aqueous solution, could be enhanced through ultrasonic irradiation. A model system based on preformed hydrous ferric oxide as the adsorbent and copper as the adsorbate was investigated. Brief exposure of the preformed hydrous ferric oxide floe to intense ultrasonic radiation (ca. 13 Watts/cm2 ) in the presence of copper species effectively disrupted the flocculated particles permitting the copper adsorbate to access adsorption sites previously isolated within the floe. The experimental data indicate that ultrasonic disruption of pre-formed hydrous ferric oxide …

Effects Of Refrigeration And Cryogenic Treatments On Austempered Ductile Iron, Gerard R. Thiel

Dissertations and Theses @ UNI

Low temperature treatment, as a method of improving mechanical properties of metals, has been studied and used for well over 60 years. Until recently these treatments have been limited to hardness and wear improvements of high alloy irons and steels. The purpose of this research is to determine the effects of refrigeration and cryogenic treatments on the mechanical properties, including hardness and tensile strength of austempered ductile iron.

This research included the production of a high strength ductile iron of low alloy content capable of being used in either the as cast, conventionally heat treated or austempered condition. Refrigeration and …

A Simulation Study Of Quality Index In Machine-Component Grouping, Hamid Seifoddini, Manocher Djassemi

Industrial Technology and Packaging

Simulation modeling is employed to determine the effectiveness of quality index in screening machine-part matrices for the development of cellular manufacturing systems.

The Process Of Technology Transfer: A Case Study Of The National Aero-Space Plane Program, Brett T. Smith

Theses and Dissertations

Due to reduced funding levels and increased pressure towards cooperation with industry, government research and development (R&D) organizations are becoming increasingly involved in the transfer of technology to the commercial sector. However, the process of technology transfer is complex, and transfer activities are being applied inconsistently across the Department of Defense. This research explores the approaches, processes and mechanisms to accomplish technology transfer. A comprehensive literature review documents many of the transfer concepts that have been proposed or are currently in use. A detailed case study then examines the technology transfer efforts of an advanced government research organization: the National …

A Study Of The Factors Associated With Successful Technology Transfer And Their Applicability To Air Force Technology Transfers, James B. Rose

Theses and Dissertations

Although the United States is a world leader in scientific research, it lags behind some economic powers in the application of technologies. As quality and manufacturing excellence were critical to US competitiveness in the l98Os, so is commercializing technologies in the 199Os. With billion dollar budgets and exceptional scientific talent, the potential for fruitful technology transfer is abundant. By definition, federal-to-commercial technology transfer is the ability to leverage national investments in technology beyond their traditional customer base. The technology can be physical devices, processes, knowledge, or proprietary information. Unfortunately, and despite exhaustive legislative efforts, US industry has fallen behind its …

Tracking Air Force Pallets Using Rfid Technology: A Concept Study, Gary A. Gross

Theses and Dissertations

The lack of asset visibility experienced at Aerial Ports of Embarkation (APOEs) during Operation Desert Storm is a phenomenon that has occurred in every major conflict for the last 40 years. The costs associated with this lack of control directly relate to the combat readiness and capability of supported units. This study examined the possibility of installing a Radio Frequency Identification (RF-ID) system to track Department of Defense 463L pallets worldwide. Performance characteristics of commercially available RF-ID systems were summarized, and a conceptual Air Mobility Command (AMC) tracking system was presented. For purposes of concept study, Amtech Corporation's Intellitag RT …

Assisting Defense Conversion Technology Transfer Efforts. A Case Study Of Ohio's Miami Valley, Marissa C. Salvador

Theses and Dissertations

Major changes in the geopolitical environment and the social and economic needs of the United States have resulted in resources being shifted away from national defense. Although the expected decrease in defense spending should not be harmful in macroeconomic terms, it can be devastating locally. To mitigate the effects of the drawdown, individual states and local communities must search for ways to bolster their local economies. One avenue that can be pursued to enhance future economic growth is the transferring of technologies to the commercial sector. Intermediary organizations have emerged to facilitate the process of technology transfer by serving as …

Merits Of The Production Volume Based Similarity Coefficient In Machine Cell Formation, Hamid Seifoddini, Manocher Djassemi

Industrial Technology and Packaging

In this paper, two types of similarity coefficients are compared: (1) the Jaccard's coefficient and (2) the production volume based coefficient. Each is used to form a cellular manufacturing system whose performance will be used as a measure of effectiveness of the similarity coefficient. The sum of intercellular and intracellular material handling costs is used as a criterion for performance evaluation.

Retrieval Of Atmospheric Turbidity Coefficiant And Water Column Density Fro Solar Irradiance Data, Felix Tendeku

Journal of the Arkansas Academy of Science

Ground-based measurement of solar irradiance has been made using a spectroradiometer at wavelengths inapx-water absorption band. An algorithm is formulated to retrieve simultaneously the atmospheic water column density and Angstrom's turbidity coefficient. The transmission models used to account for the contribution from diverse atmospheic absorbing and scattering elements are presented.

Perceived Importance Of Iso 9000 Factors As Indicators Of Quality In Industrial Technology Related Programs At Four-Year State Regional Universities, Floyd L. Olson

Dissertations and Theses @ UNI

Industry has often used a quality standard known as ISO 9000. No evidence has been located demonstrating the applicability of an industrial quality model to a singular academic department. The problem of this study was to determine if the guidelines for ISO 9004-2 could have been considered appropriate for Industrial Technology related programs and how they could have been used to indicate quality within such programs.

The purpose of this study was to seek knowledge relating the importance of ISO 9004-2 guidelines to audit and/or improve the quality management of Industrial Technology related departments at 4-year state regional universities. This …

Identification Of Success Factors In The Implementation Of Computer-Integrated Manufacturing, Dean Harold Jensen

Dissertations and Theses @ UNI

The review of recent literature showed a clear trend within the manufacturing sector toward the integration of design and production activities through increased application of the computer. The competitive advantages of computer integration were reported, as well as increased risk due to the amount of time and capital expended in system implementation. The identification of computer integrated manufacturing (CIM) success factors may reduce this risk.

Prior efforts to identify success factors for other areas of endeavor showed that success factors tended to vary with the four project phases, but were stable over time within a particular phase. More recently, empirical …

An Exploration Of Technology Transfer Control: A Case Study Of Wright Laboratory, William K. West

Theses and Dissertations

Federal laboratories, system product centers, and military logistics centers are being challenged to leverage national investments in technology beyond their traditional customer base--technology transfer. Participation in domestic technology transfer is growing at an astounding rate. Additionally, the federal government has invested and continues to invest billions of dollars into active defense conversion, dual-use technology, and technology transfer. The objective of this research is to explore how one government laboratory controls its technology transfer process, in both the near and long terms. This research examines the motives for participating in technology transfer. The researcher presents several of the processes that are …

Analysis Of Efficiency Measures For Block Diagonal Machine-Component Charts, Hamid Seifoddini, Manocher Djassemi

Industrial Technology and Packaging

Group efficiency measures have been developed to evaluate machine-component charts for the formation of cellular manufacturing systems. In this paper the existing grouping efficiency measures will be evaluated by determining the relationship between the values of a grouping efficiency measure and the performance of the corresponding cellular manufacturing system.