Industrial Technology Commons^™

Photovoltaic Cooking In The Developing World, Tyler Watkins, Christopher O'Day, Omar Arriaga

Mechanical Engineering

The challenge of clean cooking is faced by hundreds of millions of people worldwide. We present a cooking technology consisting of a solar panel directly connected to an electric heater in a well-insulated chamber. Assuming continued decrease in solar panel prices, we anticipate that in a few decades Solar Electric Cooking technologies will be the most common cooking technology for the poor. Appropriate use of insulation reduces the power demand making low-power Insulated Solar Electric Cooking systems already cost competitive.

A Comparison Of Gestures For Virtual Object Rotation, Brandon Michael Garner

Theses and Dissertations

The fields of virtual reality and gesture-based input devices are growing and becoming more popular. In order for the two technologies to be implemented together, an understanding of gestures in relation to virtual objects and users' expectations of those gestures needs to be understood. Specifically, this thesis focuses on arm gestures for the rotation of virtual objects. Participants in the study were first asked to freely perform an arm gesture they felt should execute a task. Next, participants were asked to perform specific rotation tasks with pre- configured arm gestures on four objects. There were two types of objects: those …

Using Timing-Based Side Channels For Anomaly Detection In Industrial Control Systems, Stephen Dunlap, Jonathan W. Butts, Juan L. Lopez Jr., Mason J. Rice, Barry E. Mullins

Faculty Publications

The critical infrastructure, which includes the electric power grid, railroads and water treatment facilities, is dependent on the proper operation of industrial control systems. However, malware such as Stuxnet has demonstrated the ability to alter industrial control system parameters to create physical effects. Of particular concern is malware that targets embedded devices that monitor and control system functionality, while masking the actions from plant operators and security analysts. Indeed, system security relies on guarantees that the assurance of these devices can be maintained throughout their lifetimes. This paper presents a novel approach that uses timing-based side channel analysis to establish …

Wells Fargo, Samsung And Spacex: The Dos And Don’Ts Of Today’S Quality Environment, Jim Burgin

Operations Management Presentations

Quality is everywhere, and is so critical to your success. This webinar will use Toyota’s 14 Principles as the springboard to discuss teach points from my Quality Management class. The title mentions a few companies where good practices or challenging activities provide a road map to success or failure. Rest assured there are many more. Burgin uses stories and experiences from class to illustrate quality concepts.

Fatigue Analysis Of The Welded Region In The Automotive Torsion Beam Rear Suspension System, Nan Zhan, Xiaochuan Zhang

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Fitplay Games: Increasing Exercise Motivation Through Asynchronous Social Gaming, Dario Carlos Gonzalez

Theses and Dissertations

Many factors contribute to people's physical inactivity, but among the leading factors is a lack of motivation. Fitness trackers have been shown to encourage an increase in exercise, but they are frequently abandoned within a few short months. For this thesis I developed and asynchronous-play social gaming platform, FitPlay Games, to fill the gap in motivation left by current fitness trackers. By providing users with a variety of asynchronous cooperative and competitive gaming styles, this platform enable them to find a motivation technique that works best for their lifestyle and fitness prowess. The platform encourages prolonged use of fitness trackers, …

Life Cycle Assessment Of Non-Alcoholic Single-Serve Polyethylene Terephthalate Beverage Bottles In The State Of California, Dongho Kang, Rafael Auras, Jay Singh

Industrial Technology and Packaging

The aim of this study was to evaluate the environmental burden of non-alcoholic single serving size polyethylene terephthalate beverage bottle systems in the state of California through a life cycle assessment model. A mass flow of polyethylene terephthalate beverage bottle in the U.S., and the state of California is drawn as a Sankey diagram. The life cycle assessment model is designed with five main sections; material production, polyethylene terephthalate bottle production, waste management, environmental benefit, and transportation. The scope is cradle-to-grave with a representative functional unit as the amount of polyethylene terephthalate necessary to deliver 1000 L of beverage, specifically …

Evaluation Of The Impact Of An Additive Manufacturing Enhanced Cubesat Architecture On The Cubesat Development Process, Rachel E. Sharples

Theses and Dissertations

Additive manufacturing (AM) is a fabrication method ideally suited to low-quantity, highly customized builds, leading to interest in its application to satellite development and manufacturing, where each build is unique. Due to the issues of long development schedules and high development and manufacturing costs, methods are needed in the CubeSat development process to reduce the weight and volume of subsystems and decrease integration time. The work develops an architecture for an AM-augmented CubeSat and examines the AM techniques of embedded electronics, embedded thrusters, and custom radiation-hardened materials can impact the subsystems of a CubeSat. The AM-augmented architecture shows a shift …

An Engineering Approach To Industrial Research And Development Of Pillows, Wesley Patterson

Mahurin Honors College Capstone Experience/Thesis Projects

Comfort during sleep, though taken for granted, involves a great amount of research and engineering. Few give it a second thought, but nearly one-third of a person’s life is spent with their head on a pillow, thus making them a point for increased quality. Having been approached by a tier-1 bedding manufacturer, a team of both mechanical and electrical engineers was been tasked with the goal of creating a valid research tool that the customer, Tempur-Sealy, will utilize in the company’s research and development of high-end pillows. The team sought to tackle this project utilizing tools and knowledge gained throughout …

Variety And Volume Dynamic Management For Value Creation In Changeable Manufacturing Systems, Ahmed Deif, Hoda A. Elmaraghy

Industrial Technology and Packaging

In today’s uncertain market and continuously evolving technology, managing manufacturing systems are more complex than ever. This paper studies the dynamics of managing variety and volume to enhance value creation in manufacturers implementing system-level advanced and automated manufacturing technology (AAMT). The demand is composed of heterogeneous customers who make purchasing decisions depending on the variety levels and lead times of the firm’s product offerings. The cost structure adopted calculates profit as the difference between customer value creation rate (VCR) and costs associated with the process of creating this value. Reported results contribute to the variety and volume management literature by …

Variety And Volume Dynamic Management For Value Creation In Changeable Manufacturing Systems, Ahmed M. Deif, Hoda A. Elmaraghy

Industrial Technology and Packaging

In today’s uncertain market and continuously evolving technology, managing manufacturing systems are more complex than ever. This paper studies the dynamics of managing variety and volume to enhance value creation in manufacturers implementing system-level advanced and automated manufacturing technology (AAMT). The demand is composed of heterogeneous customers who make purchasing decisions depending on the variety levels and lead times of the firm’s product offerings. The cost structure adopted calculates profit as the difference between customer value creation rate (VCR) and costs associated with the process of creating this value. Reported results contribute to the variety and volume management literature by …

Development Of An Associate Degree Level Course On Lean, Jeremy Espinoza

Master of Technology Management Plan II Graduate Projects

Lean training and education has become a focal point in both industry and the realm of academics; however, the need within the industry remains, and oftentimes companies must take on the additional and high expense of training new graduates once they enter the workforce. Often, the classes that students study in the lean methodology, if any are studied at all, are taught within other disciplines, and the instruction is in a general sense as opposed to in depth and hands on. Within the past eight years it has been referenced in different academic articles that students are not coming into …

Incorporating A New Class Of Uncertainty In Disaster Relief Logistics Planning, Emre Kirac

Graduate Theses and Dissertations

In recent years, there has been a growing interest among emergency managers in using Social data in disaster response planning. However, the trustworthiness and reliability of posted information are two of the most significant concerns, because much of the user-generated data is initially not verified. Therefore, a key tradeoff exists for emergency managers when considering whether to incorporate Social data in disaster planning efforts. By considering Social data, a larger number of needs can be identified in a shorter amount of time, potentially enabling a faster response and satisfying a class of demand that might not otherwise be discovered. However, …

Synthesis Of Nanoporous Carbohydrate Metal-Organic Framework And Encapsulation Of Acetaldehyde, Saleh Al-Ghamdi, Ajay Kathuria, Mohamad G. Abiad, Rafael Auras

Industrial Technology and Packaging

Gamma cyclodextrin (γ-CD) metal organic frameworks (CDMOFs) were synthesized by coordinating γ-CDs with potassium hydroxide (KOH), referred hereafter as CDMOF-a, and potassium benzoate (C₇H₅KO₂), denoted as CDMOF-b. The obtained CDMOF structures were characterized using nitrogen sorption isotherm, thermo-gravimetric analysis (TGA), X-ray diffraction (XRD), and scanning electron microscopy (SEM). High surface areas were achieved by the γ-CD based MOF structures where the Langmuir specific surface areas (SSA) of CDMOF-a and CDMOF-b were determined as 1376 m² g⁻¹ and 607 m² g⁻¹; respectively. The dehydrated CDMOF structures demonstrated good thermal stability …

Solar Turbines Compressor Blade Installation Tools, Ryan Bruce, Carolyn Honeycutt, Stephen Oltrogge, Emmett Ross

Mechanical Engineering

The following report documents a California Polytechnic State University, Mechanical Engineering Senior Project sponsored by the gas turbine manufacturer, Solar Turbines. The senior project team consisted of four senior mechanical engineering students at Cal Poly, all with general concentrations; Ryan Bruce, Carolyn Honeycutt, Steve Oltrogge, and Emmett Ross. Kenneth Thomas sponsored the group and serves as the point of contact between the senior project team and Solar Turbines. He is a member of the Solar Turbines Mechanical Design Engineering Team and a Cal Poly graduate. Christoph Maurer served as the project team’s on-campus advisor.

A gas turbine uses internal combustion …

Working At Tds Telecom This Summer: Cad To Gis Transform And Creating Arcgis Tools By Using Python Scripts, Zhen Yuan

Sustainability and Social Justice

My summer internship at TDS telecom last for 3 months from June to August of 2015, where I learned many academic skills and techniques during this process. Except these skills I also learned a lot from this traveling to Wisconsin itself. TDS telecom is an American local telecommunication company which is headquartered in Madison, Wisconsin. And this internship was a paid full-time internship which can be separated into two parts: manually transferring CAD data and creating python scripts to transfer the CAD data.

Modeling The Impact Of Rfid Technology On The Healthcare Supply Chain, Travis B. Peter

Industrial Engineering Undergraduate Honors Theses

Due to increasing competition in the healthcare industry, healthcare providers must find ways to reduce their costs of operation or potentially lose customers to more affordable options. For many years, the healthcare supply chain has significantly lagged behind the retail supply chain in terms of supply chain efficiency. Certain disruptive technologies that have become widespread in the retail supply chain have yet to be integrated by a significant number of healthcare providers, and as a result, there are large opportunities for improvements in the healthcare supply chain that could lead to both cost and time savings. Radio Frequency Identification (RFID) …

Modeling Supply Chain Resiliency, Jeff A. Hazel

Industrial Engineering Undergraduate Honors Theses

Engineered Resilient Systems (ERS) is a Department of Defense (DoD) program focusing on the effective and efficient design and development of complex engineered systems throughout their life cycle. There is a growing literature with qualitative definitions of resilience and quantitative models for systems with one performance measure. This paper uses a quantitative resilience framework (the Framework for ERS) that includes system design options, reliability, threats, vulnerabilities, responses, and consequences assessed in multiple system performance measures. The framework assists in establishing a model for any system to evaluate resiliency. This paper applies this framework using Multiple Objective Decision Analysis (MODA) to …

Computing Research In Academia: Classifications, Keywords, Perceptions, And Connections, Sung Han Kim

Theses and Dissertations

The Association for Computing Machinery (ACM) recognizes five computing disciplines: Computer Science (CS), Computer Engineering (CE), Information Technology (IT), Information Systems (IS), and Software Engineering (SE). Founded in 1947 the ACM is the world's largest society for computing educators, researchers, and professionals. While Computer Science has been a degree program since 1962, the other four are relatively new. This research focuses on understanding the graduate research in four of the five ACM disciplines (CS, CE, IT, and IS) using a large body of thesis and dissertation metadata. SE is not found in the metadata and graduate work in SE is …

Essays In Physicians Preference Items And Inventory Management Within The Healthcare Supply Chain, Mohammad A. Shbool

Graduate Theses and Dissertations

This work is composed of a number of topics in the healthcare area, which are approached separately with appropriate methodologies. The two topics deal with physician preference items via two different approaches. The first one investigates stock keeping unit (SKU) proliferation in healthcare organizations due to physician preference items (PPI). It captures perspectives of physicians and supply chain professionals about this problem through two surveys. The second topic builds a decision-making framework for the PPI selection process that can be used by healthcare organizations to make more objective decisions. A Multi-criteria decision making technique is implemented to illustrate the framework.

Mapping Quality In Extended Value Streams Using Data Recorders, Eric Olsen, Christopher Fung, Jay Singh, Paul Singh

Industrial Technology and Packaging

This research compares three new methods and measures for mapping and evaluating the transportation segment of a value chain. The three methods are total energy, energy-time and energy-distance. The methods combine practices used in traditional physical distribution system analysis and extended value stream mapping (VSM) analysis. This research concludes that the energy-distance method and measure is the most effective for analyzing, comparing, and identifying opportunities for value chain improvement. It also identifies a ‘U-shape’ that is characteristic of the energy transfer pattern during a transportation segment that suggests that damage from transportation may need to be screened for quality at …

Educators’ Resistance To The Technology And Engineering Education Transition, Kenneth L. Rigler Ph.D.

Applied Technology Faculty Publications

The purpose of the qualitative grounded theory study was to explore why industrial arts educators resisted organizational change to technology and engineering education. An exploratory, grounded theory method was used to identify new theory related to educators’ resistance because the current literature did not provide a theoretical perspective about why industrial arts educators have resisted the change. The sampling frame was derived from a database of 379 secondary technology and engineering education teachers in the state of Kansas, and a sample size of 13 participants was needed to reach theoretical saturation of the phenomenon. The data for the study was …

Optimization Of Process Parameters In Micro Electrical Discharge Machining (Edm) Of Ti-6al-4v Alloy, Farshid Alavi

Masters Theses & Specialist Projects

Ti-6Al-4V has a wide range of applications such as in the automotive and aerospace industries. Nevertheless, titanium alloys are very difficult to machine by conventional methods. Micro-EDM is a non-conventional machining method that uses the thermal effect of precisely controlled sparks. Manufacturers are looking for the methods and optimal settings to increase the productivity of micro-EDM in terms of lessening machining time and tool wear. Moreover, surface integrity of the machined area is crucial for some products such as biomedical implants.

The objective of this study was to investigate the effects of the micro-EDM process parameters on response variables, in …

Determining The Degree Of The Routinization Of Additive Manufacturing In The Air Logistics Complexes, Candis A. Woods

Theses and Dissertations

Fiscal constraints have affected the USAF’s spending and sustainment of weapons systems that are being utilized beyond their programmed life cycle; therefore, it is imperative that processes be given the critical eye for improvement, innovative approaches, and/or best practice implementation. The AFSC, part of the AFMC, has embarked on a groundbreaking effort to transform operations and leverage industry best practices, while maintaining focus on warfighter support to create “The AFSC Way.” The AFSC Way is based on a shared leadership model that emphasizes speed, safety, and quality, which gives way to innovative ideas and new technologies in order to achieve …

Perceptions Of The Advanced Manufacturing Competency Model (Amcm) For Curriculum Development, Mark Doggett, Muhammad Jahan

SEAS Faculty Publications

The Advanced Manufacturing Competency Model (AMCM) model emphasizes building of competencies at all levels ranging from the shop floor production worker to manufacturing engineers. It consists of different levels of competencies organized hierarchically. The levels are personal effectiveness, academic, workplace, industry-wide technical, industry-sector technical, management and organization-specific competencies.

This paper discusses survey research on the perceptions of manufacturing students, faculty, and industry advisory board members regarding the AMCM. The research evaluated the manufacturing program based on perceptions of the AMCM competencies and the curricular coverage required for entry-level manufacturing professionals. Specifically, the survey sought to answer the following research questions: …

Assessing Leanness Level With Demand Dynamics In A Multi-Stage Production System, Rehab M. Ali, Ahmed Deif

Industrial Technology and Packaging

Purpose

Design/methodology/approach

Applications Of Digital Manufacturing In Manufacturing Process Support, Vukica Jovanovic, Mihael Debevec, Niko Herakovic, Alok Verma, Mileta Tomovic

Engineering Technology Faculty Publications

In this study, the authors developed three new approaches and models for improvements related to manufacturing processes. The main focus was on planning in a digital environment before the actual manufacturing process is carried out. The first approach is digital manufacturing, which gives affords the opportunity for performing an entire manufacturing process in a virtual environment. In this way, engineers virtually define, plan, create, monitor, and control all production processes. The planning phase can be done simultaneously, while other manufacturing processes are already in place. In this way, processes can continue with no interruption. Various product lifecycle management tools have …

The Reconfigurable Machinery Efficient Workspace Analysis Based On The Twist Angles, Ana M. Djuric, Vukica Jovanovic, Mirjana Filipovic, Ljubinko Kevac

Engineering Technology Faculty Publications

A novel methodology for the calculation, visualisation and analysis of the Reconfigurable Machinery Efficient Workspace (RMEW), based on the twist angles, is presented in this paper. The machinery's kinematic parameters are used for calculating the workspace, while the efficient workspace is associated with the machinery's path and includes the end-effector position and orientation. To analyse and visualise many different machinery efficient workspaces at the same time, the calculation is based on the previously developed and validated complex reconfigurable machinery's kinematic structure named n-DOF Global Kinematic Model (n-GKM). An industrial robot is used as an example to demonstrate …