Industrial Technology Commons^™

Determination Of The Content Of Water-Soluble Vitamins In The Composition Of Beet Beetroot Composition, Jasur Esirgapovich Safarov, Shakhnoza Abduvaxitovna Sultanova, Muhammad Rasul Oglu Najafli, Doston Ishmuhammat Ugli Samandarov

Chemical Technology, Control and Management

The aim of this study was to determine the content of water-soluble vitamins in various parts of beetroot (pulp, leaves and stems) that had been subjected to various drying methods in a bid to explore the effect of physical processes, i.e., the application of ultrasound, on micronutrient preservation. The experiments were performed at the Department of Service Technologies of Tashkent State Technical University, and chromatographic analysis was performed in the Institute of Bioorganic Chemistry of the Academy of Sciences of the Republic of Uzbekistan. Chromatography was performed on Agilent-1200 chromatograph with Exlipse XDB C18 column and diode array detector using …

Methods For Treating Wastewater Generated During The Production Of Basalt Fiber Using Modified Bentonite Clay, Abdurasul O'Ktamovich Husenov, Baxtiyor Toxtayevich Sabirov, Diyor Asadullayevich Xadjibayev

Chemical Technology, Control and Management

This scientific article notes that in technological processes, wastewater is contaminated with various organic and mineral substances, including poisonous and toxic substances. Sources of environmental pollution include organic and inorganic substances formed during the production of basalt fiber. In this research work, the task is set to purify wastewater formed during the production of basalt fiber from organic substances. Bentonite clay is a very good natural sorbent and has the ability to purify some cations. When conducting laboratory experiments, bentonite clays from the "Azkamar" and "Navbahor" deposits were selected to purify wastewater formed during the production of basalt fiber from …

Mathematical Models Of Magnetoelastic Acceleration Transducers Developed Based On The Theory Of Lumped Parameter Circuits, Amirov Fayzullayevich Sulton, Kamila Kamilovna Jurayeva, Shovkat Dilshodovich Turayev

Chemical Technology, Control and Management

In this article, based on the theory of lumped-parameter circuits, algebraic and differential equations describing the mechanical, electrical, and magnetic circuits of new magnetoelastic acceleration transducers, their analytical solutions, as well as mathematical models establishing the relationship between the electromotive forces at the outputs of the transducers and acceleration, which is the input quantity of the transducer, have been developed. Analysis of these mathematical models and the graphs constructed on their basis shows that under the influence of acceleration applied to the transducers, with an increase in the mechanical stresses arising in the magnetic circuit of the transducer, a redistribution …

Optimal Procedure For Measuring The Parameters Of Optical Signals Considering Noise, Yuriy Gennadyevich Shipulin, Azimjon Mamadaliyevich Xusanov

Chemical Technology, Control and Management

It has been shown that to achieve the required level of measurement accuracy and reliability, it is necessary to transition from quality control of finished products to quality management based on cost-effective methods during the stages when product properties are formed. It is shown that the complexity of measuring optical signal parameters during analysis or synthesis requires them to be considered as part of a general information processing system. Based on the nonlinear filtration method, an optimal procedure for measuring a variable position in time against a background of spatial noise was obtained. Structural diagrams of optimal measuring instruments for …

Development And Uncertainty Assessment Of Secondary Method For Ph Measurement In Physicochemical Measurements, Sarvar Rakhmatullaev, Dostonbek Xujakulov, Mohinur Nigmatova

Chemical Technology, Control and Management

In physicochemical measurements across various industries, laboratory analyses commonly require the determination of pH as an indicator of hydrogen ion activity in aqueous solutions. Ensuring the accuracy and reliability of these measurements, obtaining precise readings from pH measuring instruments, and maintaining overall measurement quality represent critical challenges in guaranteeing the safety of both products and processes. This requires constant monitoring, accuracy assessment, calibration, metrological verification, and control of measuring instruments. In this case, it should be carried out not with solutions prepared in any laboratory, but with certified reference materials (СRM) with appropriate regulatory framework, ensuring metrological observation. …

Robust-Adaptive Estimation Of Unmeasurable States And External Disturbances Of A Dynamic Object Based On An Augmented Kalman Filter, Husan Igamberdiev, Uktam Farkhodovich Mamirov, Lu Liu, Bohong Wang, Bunyod Buronov

Chemical Technology, Control and Management

The paper addresses the problem of joint estimation of the directly unmeasurable states of a dynamic object and of external disturbances when information is available only on the control inputs and on the measured output signals. To solve this problem, a robust-adaptive algorithm based on an augmented Kalman filter is proposed, in which the external disturbance is included in the extended state vector. Two operating modes of the algorithm are considered. For slowly varying disturbances, a random-walk model with a constant process-noise covariance is used, whereas for rapidly varying inputs a signal adaptation  driven by the normalized innovation is proposed. …

Fast Algorithms For Combined Synthesis Of Dynamic Object Control Systems, Isomiddin Khakimovich Siddikov, Gulchexra Alimova

Chemical Technology, Control and Management

The paper considers the issues of combined synthesis of a control system for a nonlinear dynamic object. The combined synthesis algorithms are based on the hybrid application of the theory of ordinary differential equations in the Cauchy form and the theory of automatic control. In this case, the dynamics of the control system are described in the input-output representation and by state-space equations. Algorithms for solving stabilization problems, finite control, and the inverse dynamics problem are presented in explicit form. These algorithms are based on the concept of reducibility of a general Cauchy-form system to the block-canonical Frobenius form. The …

Nonlinear System Identification Based On Fuzzy Radial Basis Neural Network With Multi-Connected Weight Connections, Kabul Khudaybergenov

Chemical Technology, Control and Management

This paper builds on our earlier radial basis function network with multiple connections (RBFMC) by placing it within a fuzzy inference framework for nonlinear system identification. The idea is inspired by the diversity of neurotransmitters found in biological neurons: instead of a single hidden-to-output weight, RBFMC gives each hidden unit a multi-dimensional connection whose components act as independent filters. Once fuzzy logic is added, each hidden neuron becomes a fuzzy rule, and its antecedent is built from several Gaussian membership functions, one per connection. The resulting Fuzzy RBFMC produces an interpretable, multi-filter description of local regions of the input space …

Performance Evaluation Of Controllers Using Fuzzy Delphi And Ahp Techniques, Kamala. R. Aliyeva, Nihad Mehdiyev, Shamil Mehdi

Chemical Technology, Control and Management

This study introduces an enhanced decision-support framework that integrates the Fuzzy Delphi method with the Analytic Hierarchy Process (AHP) to improve controller tuning and performance evaluation in uncertain environments. Traditional tuning techniques typically depend on crisp expert judgments and deterministic performance indices; however, industrial control systems are characterized by nonlinear behaviors, uncertain parameter variations, and subjective expert evaluations that are often vague or inconsistent. The Fuzzy Delphi procedure is applied to systematically gather, filter, and consolidate expert insights, enabling a refined set of performance criteria such as stability margins, robustness to disturbances, settling time, overshoot, control effort, and energy consumption …

Documentation And Project Change Management System – Honeywell Trace, Farukh Adilov, N.R Yusupbekov, Maksim Fedorovich Astafurov, Kamola Rustamovna Abdullayeva

Chemical Technology, Control and Management

The article examines modern approaches to organizing documentation and managing changes in industrial automation projects using the Honeywell Trace software platform. The evolution of documentation tools from the Documentation Tool utility within the TDC 2000/3000 system to modern intelligent solutions is described. The architecture, functional capabilities, and supported interfaces of Honeywell Trace are analyzed. Particular attention is paid to automated configuration change tracking, comprehensive search by process tags, and the detection of potential errors. The possibilities of integrating the system with industrial process control systems, controllers, auxiliary systems, and industrial communication protocols are considered. The application of Honeywell Trace during …

Integrasi Metodologi Hazop Dalam Pengendalian Risiko Dan Keberlanjutan Operasional Pada Unit Pemulihan Urea: Studi Kasus Pada Industri Pupuk, Riny Yolandha Parapat, Arin Nur'aini Putri, Aryasatya Ramadhan Sukresno

National Journal of Occupational Health and Safety

The fertilizer industry is one of the chemical sectors with high-risk potential due to its operational processes involving hazardous materials as well as extreme pressure and temperature conditions. This study aims to identify and analyze hazards in the urea recovery unit using the Hazard and Operability Study (HAZOP) method, while also formulating effective risk control strategies to support the operational sustainability of the plant. The study was conducted directly at a commercial fertilizer plant in West Java using a semi-quantitative approach, which included field observations, review of technical documents such as Process Flow Diagrams (PFD), Piping and Instrumentation Diagrams (P&ID), …

Intelligent Manufacturing Of Edible Oil: From Smart Sensing To Big Data Platform, Ru Jiang, Nadirbek Yusupbekov

Chemical Technology, Control and Management

With the rapid advancement of Industry 4.0 technologies, intelligent manufacturing and big data platforms are profoundly transforming the production models of the traditional edible oil industry. The edible oil production process involves multiple complex unit operations such as refining, decolorization, and deodorization, which impose high requirements on process control and product quality monitoring. This paper presents a systematic review of key technological advances in the field of intelligent manufacturing of edible oil, establishing a comprehensive technical framework encompassing four dimensions: smart sensing, artificial intelligence applications, IoT communication, and big data platforms. The review begins by analyzing the global background and …

Reliability Analysis Of Separator Control Systems, D.P. Muxitdinov, O.U. Sattarov, M.Sh. Nematov

Chemical Technology, Control and Management

This article aims to enhance the reliability, efficiency, and diagnostic capabilities of gas-liquid separators operating in hazardous technological processes. In the study, the separator is considered as a critical functional unit of an industrial system and is analyzed through structural and functional decomposition. The main operating parameters of the separator, including pressure drop (ΔP), separation efficiency and operational state are described on the basis of a mathematical model. In addition, a state model is developed for normal operation, foaming, liquid droplet carryover with the gas flow, and failure conditions. Emphasis is placed on diagnostic and monitoring issues, …

Data-Driven Neuro-Fuzzy Modeling And Rule Optimization For Intelligent Prediction Of Bioreactor Dynamics, Kamala Najaf Mammadzada

Chemical Technology, Control and Management

Modeling wastewater bioreactors is a challenging problem in environmental engineering because the processes are constantly changing and the microorganisms do not behave in a linear or predictable way. This makes it difficult to predict and control the system behavior. This research investigates three artificial intelligence approaches for modeling wastewater bioreactors: the Mamdani Fuzzy Inference System (FIS), the Adaptive Neuro-Fuzzy Inference System (ANFIS), and clustering-based fuzzy models. These models help us predict what is happening in the bioreactors. For instance they help us predict how the amount of substances in the water is changing over time like dS₀/dt dSs/dt …

Analysis Of Automatic Control Of The Channels And Ditches Cleaning Mechanism Based On Dynamic Indicators, Nasiba Siraj Amirbayova

Chemical Technology, Control and Management

The article deals with the automated design and experimental investigation of reinforced concrete irrigation channels and ditches, their interrelated channel-cleaning mechanisms, which are complex mechatronic systems integrating hydraulic, mechanical, and electronic components. A thorough methodology is suggested, hydrodynamic modeling, combining parametric analysis, and information-based design support to enhance channel concrete cover thickness, geometry, and cleaning system performance. Main structural parameters—involving channel depth, slope, bottom width, and concrete cover—are systematically defined and shown in matrix form to facilitate automated calculation and decision-making. Experimental prototypes and Solid Edge-based digital models are employed to verify the methodology, revealing vital interdependencies between structural parameters, …

Increasing The Prediction Accuracy Of Plant Oil Production Processes Through Adjusting The Parameters Of Machine Learning Models, Umidjon Ruziev, M.K. Shodiev, A.T. Rajabov

Chemical Technology, Control and Management

Vegetable oil production is characterized by high variability in output indicators due to nonlinear interactions between raw material parameters, equipment modes, and heat and mass transfer conditions. Existing approaches to applying machine learning in this field, as a rule, do not account for the impact of hyperparameter adjustments on forecasting quality across specific technological stages. The article presents a systematic methodology for adjusting model parameters (Ridge regression, SVR, GBM, LSTM) applied to three key tasks: predicting residual oil content in oil cake, color index during bleaching, and free fatty acid content during deodorization. In a set of 1000 observations, including …

Regular Synthesis Algorithms Of Control Devices In Nonlinear Control Systems, Husan Zakirovich Igamberdiyev, Iskandar Yusupovich Abdurakhmanov, Uktam Farkhodovich Mamirov

Chemical Technology, Control and Management

This paper examines the development of regularized algorithms for synthesizing control devices in control systems for polynomial objects, described by multidimensional Volterra functional series. The synthesis problem is solved using a two-stage procedure. In the first stage, the optimization problem is initially solved for an open-loop system. The second stage involves determining the parameters of the control device, i.e., its impulse response functions, by using the relationship between the characteristics of the open-loop and closed-loop systems. Regular algorithms are presented for finding the impulse response functions of the control device based on methods for regularizing the solution of operator equations …

Rdm Interval Arithmetic Based Weapon System Evaluation, Konul Imran Jabbarova Phd

Chemical Technology, Control and Management

For solving this issue, the paper considers a hierarchical multi-criteria decision-making problem, where the choice of a company that corresponds best to the criteria is required. Data used in this problem are presented in the form of intervals, which makes it possible to cope with uncertainty in the problem solution. Several companies working in missile production industry are chosen as alternatives for analysis. Evaluation of the selected alternatives is made based on five criteria clusters. More than twenty criteria are taken into account during evaluation.

Solving this problem is achieved with the help of the technique based on computation of …

Structural Decomposition-Based Control Synthesis For Multivariable Systems Using Oblique Projection Operators, Abdukaxxarov Inomjon Ilxom Ugli Mr, Oripjon Olimovich Zaripov, Jasur Usmonovich Sevinov

Chemical Technology, Control and Management

This paper proposes a novel approach to control synthesis for multivariable systems with algebraic constraints using oblique projection operators and their structural decomposition. The method transforms a standard control law into a structured form by decomposing the control input into constraint-satisfying and null-space components. A generalized oblique projector is constructed using a dual matrix, ensuring flexibility in shaping system properties. Furthermore, a recursive decomposition algorithm is developed, allowing the global projector to be represented as a sum of local operators corresponding to subsystem structures. The proposed framework enables modular control design, decoupling of interactions, and efficient implementation for large-scale systems. …

Conceptual Model For Protecting Personal Data By Depersonalization In Information Systems: Principles, Components, And Life Cycle, Zarina Ildarovna Azizova

Chemical Technology, Control and Management

This article presents a systematic approach to personal data protection through depersonalization in the context of regulatory pressure and growing cyber threats. It proposes a comprehensive conceptual model that formalizes the de-identification process as a manageable sequence of steps, from attribute classification and method selection to mandatory verification of the result. The article also provides a comparative analysis of existing depersonalization methods in terms of their applicability within the proposed model. The model serves as a basis for the development of specific algorithms, as demonstrated by the example of a data shuffling approach.

Algorithms Of Stable Adaptive Observation Of A Multidimensional Undefinite Object, Tursunova Sadoqat Abdusalom Qizi

Chemical Technology, Control and Management

This article presents an algorithm for simultaneously estimating the parameters and state coordinates of a multidimensional control object when some of its state variables are not directly measured. The inability to measure all state variables (coordinates) of an object is a well-known drawback of identification schemes. Such conditions require the construction of adaptive state observers. This work demonstrates that when identifying the parameters of a mathematical model for an uncertain multidimensional object, the asymptotic stability of the object and the convergence of its parameters to the model parameters are ensured, provided the input vector is sufficiently informative. The construction of …

Analysis Of The Carbonization Process Of Ammoniated Brine In Ammonia-Soda Production, Nadirbek Rustambekovich Yusupbekov, Djalolitdin Paxritdinovich Mukhitdinov, Fotima Faxritdinovna Iskhakova

Chemical Technology, Control and Management

The work provides an analytical review of the current state of modeling and controlling the carbonization process of ammoniated brine. It analyzes modern methods of mathematical, simulation, and intelligent modeling of heat and mass transfer, hydrodynamics, carbonation kinetics, and crystallization. The paper considers the potential of using digital twins, neural network models, fuzzy logic devices, and hybrid models to improve forecasting accuracy and the adaptability of process solutions. Modern carbonation process control strategies are also considered. A detailed analysis is provided of predictive control (MPC), neuro-fuzzy controllers, decentralized and multivariate control systems that ensure stable column operation under disturbances, optimize …

Inductive Transducers For Measuring Vibrations, S.F. Amirov, A.Kh. Sulliev, A.A. Shoimkulov

Chemical Technology, Control and Management

A new design of an induction transducer has been developed for measuring linear and torsional vibrations in different directions with high sensitivity by constructing an inertial element consisting of four mutually perpendicular sectors and making the masses of two adjacent sectors different from the masses of the other two adjacent sectors. By constructing an inertial element in the form of a sector with two mutually diametric magnetic cores and different masses, and placing it between the horizontal and vertical axes, a design of an induction transducer has been developed that highly sensitively measures linear and torsional vibrations in different directions, …

Research Of Logic Elements Based On Complementary Bipolar Transistors, Nodira Batirdjanovna Alimova, Nilufar Baxtiyorovna Gulyamova

Chemical Technology, Control and Management

Important parameters for any type of inverter – a NOT logic gate – are the power consumption during switching and the supply voltage. The proposed connection of complementary (two different types) bipolar transistors reduces the current consumption and supply voltage by simultaneously using the cutoff and saturation modes of the bipolar transistors. It has been theoretically and experimentally established that an inverter using complementary bipolar transistors operates at low supply voltages, approximately 0.7 V. Power consumption is virtually independent of the inverter's static state. A method for calculating the transfer characteristic of an inverter using complementary bipolar transistors is developed, …

The Main Errors Of The Ultrasonic Sensor In Measuring Water Flow In Open Channels, Anvar Urolovich Djalilov

Chemical Technology, Control and Management

This article analyzes the use of ultrasonic sensors in measuring water flow and the main errors that may occur in this process. In the conducted scientific research, a time-pulse ultrasonic sensor was tested. The absolute, relative and repeatability errors of the sensor during water flow measurement were studied. The absolute error represents the largest difference between the value recorded by the sensor and the real value, affecting the overall accuracy of the measurement system. This error can vary depending on environmental factors, the design and operating principles of the sensor. During the experiment, the performance of this sensor was …

Synthesis Of An Adaptive Synergistic Fuzzy Discrete Controller For Nonlinear Systems, Isamidin Xakimovich Sidikov, Gulruxsor Murot Qizi Nashvandova, Feruzakhon Botirxon Qizi Sodiqova

Chemical Technology, Control and Management

The paper considers the issues of synthesizing an adaptive fuzzy synergetic controller with discrete time for nonstationary nonlinear dynamic objects. The proposed approach is based on the integrated use of synergetic control principles and fuzzy logic methods, which ensure the formation of a control law for nonlinear dynamic objects that provides asymptotic stability of the control system. Such a hybrid combination makes it possible to guarantee the asymptotic stability of the closed-loop system and to shape the required dynamic behavior of the object over a wide range of operating modes. In addition, this approach provides the ability to adapt to …

Adaptive-Robust Control Of Dynamic Systems Using Generalized Predictive Methods, Shuxrat Tulyaganov

Chemical Technology, Control and Management

This paper considers an approach to adaptive-robust control of dynamic systems using generalized anticipation, where the object is described by a locally linearized model. Known self-tuning algorithms show insufficient stability to inaccurate selection of delay or model order. A generalized predictive control approach is suggested, with simulation outcomes showing superiority over traditional methods like generalized minimum variance control and pole assignment.This sliding horizon algorithm is based on predicting future system output signals several steps ahead, based on assumptions about subsequent control actions. One effective assumption is the presence of a “control horizon,” beyond which control signal increments are assumed to …

Review Of Modern Methods For Identification, Forecasting, And Intelligent Control Of Wastewater Biological Treatment Processes, Mirkhalil Agzamovich Ismailov, Boburbek Zokirjon O'G'Li Mannobjonov

Chemical Technology, Control and Management

This article presents a comprehensive review of contemporary approaches to the automation and intelligent control of wastewater biological treatment processes. Particular emphasis is placed on the digitalisation of wastewater treatment plants, ranging from the implementation of automated process control systems (APCS/SCADA-based solutions) to the application of predictive algorithms and the development of digital twins of bioreactors.

Special attention is devoted to mathematical models that underpin the control of bioprocesses. The evolution of the most widely used activated sludge models—ASM1, ASM2d, and ASM3—is examined, as these models describe key processes such as microbial community growth, nitrification, denitrification, and phosphorus removal. It …

Analog Systems Of Physical Quantities And Their Graph Models In Determining The Parameters Of Mechatronic Modules, Temurbek Omonboevich Rakhimov, Elmira Eshmurod Qizi Raxmanova, Guzal Khujaniyazova

Chemical Technology, Control and Management

This article is dedicated to the analogy systems of physical quantities and their graph models in determining the parameters of mechatronic modules. It presents the general sets and fundamental laws of analogy systems of physical quantities and their elements for determining the parameters of mechatronic modules. Based on the general sets and fundamental laws of analogy systems of physical quantities and their elements, principles have been developed for mechatronic modules with a heterogeneous structure consisting of electrical, magnetic, and mechanical parts. In these modules, the field as a form of matter exists, forming the basis for developing mathematical models to …

Investigation Of Nonlinear Magnetic Circuits Of Measuring Transducers With A Special Parameter Distribution Structure, Javhar Sulton O'G'Li Fayzullayev

Chemical Technology, Control and Management

The article proposes a new analytical method for investigating nonlinear magnetic circuits with a special structure of parameter distribution. The method is based on introducing into the system of nonlinear differential equations of such circuits the condition that the second derivative of the magnetic flux along the length of the circuit is equal to zero, as well as on the assumption that one of the geometric parameters of the studied magnetic circuit – the size of the air gap between the ferromagnetic rods, their thickness, width, or the linear value of the number of turns of the distributed excitation winding …