Industrial Technology Commons^™

Nonlinear System Identification Based On Fuzzy Radial Basis Neural Network With Multi-Connected Weight Connections, Kabul Khudaybergenov

Chemical Technology, Control and Management

This paper builds on our earlier radial basis function network with multiple connections (RBFMC) by placing it within a fuzzy inference framework for nonlinear system identification. The idea is inspired by the diversity of neurotransmitters found in biological neurons: instead of a single hidden-to-output weight, RBFMC gives each hidden unit a multi-dimensional connection whose components act as independent filters. Once fuzzy logic is added, each hidden neuron becomes a fuzzy rule, and its antecedent is built from several Gaussian membership functions, one per connection. The resulting Fuzzy RBFMC produces an interpretable, multi-filter description of local regions of the input space …

Feasibility Study Of Transitioning From Thick Plates (0.250”) Mounted On 30-Point Pvc Carriers To Thinner Plate Technologies Mounted On Recyclable Foam And Pet (0.155”) For Post-Print Corrugated, Nathaniel J. Poole

All Theses

In the United States, the most common press configuration for brown-box printing is a 0.280” undercut press. These press configurations have long relied on thick 0.250” plates mounted on 0.030” PVC sheets to print onto corrugated substrates. Each year, around twenty million pounds of waste are produced by the printing industry, through paper waste, plate waste, among other materials. One large factor of that waste is flexographic plate waste, which either ends its life in a landfill or is repurposed into other products. This study establishes a comparison between traditionally used 0.250” plates on 30pt PVC versus 0.155” plates mounted …

Analysis And Study Of Telemetry Systems For Directional And Horizontal Well Drilling, Jahongir Abdiganiyev Erkin Ugli, Sherali Halloqovich Umedov

Technical science and innovation

The article discusses the issues of reducing non-productive drilling time during the construction of directional and horizontal wells. The main focus is on the analysis of drilling conditions in complex geological and high-temperature environments. Particular attention is paid to drilling conditions in the territory of the Republic of Uzbekistan, with a specific study of data from the Boysun and Ustyurt regions. An analysis and study of the performance of telemetry systems available on the market, as well as their main technical characteristics, have been conducted. Key factors affecting the accuracy of wellbore trajectory measurements under various geological and technical conditions …

Predicting Simulation Times For Multiphase Thermal-Hydraulic Models, Andrew Yule, Andrew Taylor

SMU Data Science Review

Addressing the challenge of computationally intensive OLGA

simulations in the oil and gas industry, a machine learning framework is

developed for accurate runtime prediction. A specialized feature extraction

pipeline identifies key parameters—such as simulation time, time step,

number of branches, and section count—from OLGA input files that serve as

high-impact predictors. Multiple predictive models, including regression,

tree-based ensembles, and neural networks, are implemented to validate

accuracy and robustness. Results reveal that prioritizing simulations based on

predicted runtimes optimizes licensing resources and reduces operational

costs, making real-time scheduling more efficient. This research demonstrates

the effectiveness of data-driven runtime prediction in enhancing …

Comparative Evaluation Of Linear Regression, Cross Validation And Regularization Approaches In Multivariate Data Analysis, Ransford Owusu, Felix Yeboah, Francis Effah Boateng

Data Science and Data Mining

This study evaluates linear regression and its enhanced variants incorporating cross-validation and regularization techniques for high-dimensional, multivariate datasets. We address challenges such as multicollinearity and overfitting. Methods including Ridge, LASSO, and Elastic Net are compared against ordinary least squares regression. Empirical analysis using an automobile dataset for fuel efficiency prediction shows that while OLS regression captures basic relationships, its limitations are mitigated through regularization and cross-validation, resulting in improved model interpretability. The findings provide a comprehensive framework for predictive modeling in complex data environments and offer insights into statistical methodology and practical applications in the automobile industry.

A Comprehensive Usability And Economic Analysis Of Heat-Related Wearable Technologies: Applications To Occupational Health, Ryan T. Cannady

Theses & Dissertations

The purpose of this research was to analyze the usability and economic considerations of real-time wearable technologies that are implemented in occupational settings to assess risk of heat stress and heat strain. The study population included current agriculture workers and Department of Energy (DOE), Environmental Management (EM) contractors. We employed a mixed-methods approach to comprehensively analyze the usability and economic considerations of heat-related technologies. Specifically, our approach assessed three distinct aspects the applications of these technologies in occupational settings to comprehensively address our research objective: (1) worker perceptions of heat-related wearable technologies, (2) field-based assessment of these heat-related wearable technologies, …

Autonomous Experimentation For Accelerated Calibration Of Fused Deposition Modeling 3d Printers, Graig S. Ganitano

Theses and Dissertations

Additive Manufacturing (AM), also known as 3D printing, has emerged as a key component of Industry 4.0, enabling reduced cost, quick production, greater sustainability, and increased design complexity compared to its traditional manufacturing counterpart. Currently, Fused Deposition Modeling (FDM) technology dominates the AM market with respect to the number of 3D printers in use. However, the FDM process is sensitive to changes in system configuration, especially the feedstock material. Utilizing a new feedstock requires a time-consuming trial-and-error process to identify optimal settings for a large number of process parameters, acting as a barrier to the technology.

To enable greater accessibility …

A Screening Life Cycle Analysis Of One-Way And Reusable Crate Designs – Estimating Environmental Impacts Via Lca Software, Nicolas R. Corona

Master's Theses

A comparison analysis conducted via COMPASS life cycle analysis software has indicated that a one-way crate design, rather than a reusable crate design, is in fact the more environmentally friendly packaging system. These results can be interpreted differently, however, as the manufacturer of said crate designs must confirm what impact indicators they would like to reference as environmental goalposts. The conducted analysis provides insight into what the environmental impacts of each packaging system look like as packaging at all three system levels has been identified as a means of reducing environmental impacts globally. As such, the manufacturer of said crate …

Predicting Rheology Of Uv-Curable Nanoparticle Ink Components And Compositions For Inkjet Additive Manufacturing, Cameron D. Lutz

Master's Theses

Inkjet additive manufacturing is the next step toward ubiquitous manufacturing by enabling multi-material printing that can exhibit various mechanical, electronic, and thermal properties. These characteristics are realized in the careful formulation of the inks and their functional materials, but there are many constraints that need to be satisfied to allow optimal jetting performance and build quality when used in an inkjet 3-D printer. Previous research has addressed the desirable rheology characteristics to enable stable drop formation and how the metallic nanoparticles affect the viscosity of inks. The contending goals of increasing nanoparticle-loading to improve material deposition rates while trying to …

Identification Of Faults In Highways Using Approximation Methods And Algorithms, Khudayberdiyev Khakkulmirzayevich Mirzaakbar, Anvar Asatilloyevich Ravshanov

Chemical Technology, Control and Management

Many fast Fourier transforms are used to identify defective parts of uneven surfaces on roads and send information to relevant organizations on the road, using the " RAVON YO‘LLAR" application installed on a mobile device during car movement. We determine the uneven parts of the road. Smooth and well-maintained roads reduce the risk of vehicle collisions, skidding and other road-related incidents. Timely measures contribute to overall safety, comfort and economic efficiency.

Containerization Of Seafarers In The International Shipping Industry: Contemporary Seamanship, Maritime Social Infrastructures, And Mobility Politics Of Global Logistics, Liang Wu

Dissertations, Theses, and Capstone Projects

This dissertation discusses the mobility politics of container shipping and argues that technological development, political-economic order, and social infrastructure co-produce one another. Containerization, the use of standardized containers to carry cargo across modes of transportation that is said to have revolutionized and globalized international trade since the late 1950s, has served to expand and extend the power of international coalitions of states and corporations to control the movements of commodities (shipments) and labor (seafarers). The advent and development of containerization was driven by a sociotechnical imaginary and international social contract of seamless shipping and cargo flows. In practice, this liberal, …

The Algorithm For The Design Of Fine Granular Substances’ Smart-Type Heat And Moisture Converters Based On Their Accuracy And Speed Criteria, Erkin Uljaev, Ali Abduakhatovich Abduraxmanov

Chemical Technology, Control and Management

The paper describes a technique and algorithm allowing to perform parametric design of smart-type heat and moisture converters (hereinafter SHMC) of fine-grained dispersive materials based on their criteria of accuracy and speed. The proposed algorithm optimizes the process of design of smart-type switches and ensure optimal performance of the switches. The method of calculation and selection of optimal parameters of smart-type heat and moisture converters intended to be used in the measurement of parameters such as heat and humidity of fine dispersive substances are aimed at boosting two parameters, i.e., the accuracy and speed. Also, the design stages have been …

A Hybrid Metaheuristic And Computer Vision Approach To Closed-Loop Calibration Of Fused Deposition Modeling 3d Printers, Graig S. Ganitano, Shay V. Wallace, Benji Maruyama, Gilbert L. Peterson

Faculty Publications

Fused deposition modeling (FDM) is one of the most popular additive manufacturing (AM) technologies for reasons including its low cost and versatility. However, like many AM technologies, the FDM process is sensitive to changes in the feedstock material. Utilizing a new feedstock requires a time-consuming trial-and-error process to identify optimal settings for a large number of process parameters. The experience required to efficiently calibrate a printer to a new feedstock acts as a barrier to entry. To enable greater accessibility to non-expert users, this paper presents the first system for autonomous calibration of low-cost FDM 3D printers that demonstrates optimizing …

Fungi In Flux | Designing Regenerative Materials And Products With Mycelium, Arvind Bhallamudi

Masters Theses

As the world grapples with the escalating crisis of climate threats and environmental degradation, this research delves into the synergistic potential of design and biology, developing safe and sustainable materials for applications in prototyping, furniture and interior design. Harnessing the power of a unique organism - fungi, the study proposes an accessible, efficient, and resilient material resource system. It utilizes local waste streams and mycelium (the vegetative part of fungi) to grow functional structures. An experimental and small-scale protocol is modeled by testing bio-fabrication and bio-printing methods. The composites' performance qualities and characteristics are evaluated through mechanical testing and a …

Fast And Accurate 3d Object Reconstruction For Cargo Load Planning, Adam R. Nasi

Theses and Dissertations

Cargo load planning involves efficiently packing objects into aircraft subject to constraints such as space and weight distribution. Currently, this is performed manually by loadmasters. The United States Air Force is investigating ways to automate this process in order to improve airlift operational readiness while saving money. The first step in such a process would be generating 3D reconstructions of cargo objects to be used by a load planning algorithm. To that end, this thesis presents a novel method for fast, scaled, and accurate 3D reconstruction of cargo objects. This method can scan a 2.5m×3m×2m object in less than 10 …

Automated Registration Of Titanium Metal Imaging Of Aircraft Components Using Deep Learning Techniques, Nathan A. Johnston

Theses and Dissertations

Studies have shown a connection between early catastrophic engine failures with microtexture regions (MTRs) of a specific size and orientation on the titanium metal engine components. The MTRs can be identified through the use of Electron Backscatter Diffraction (EBSD) however doing so is costly and requires destruction of the metal component being tested. A new methodology of characterizing MTRs is needed to properly evaluate the reliability of engine components on live aircraft. The Air Force Research Lab Materials Directorate (AFRL/RX) proposed a solution of supplementing EBSD with two non-destructive modalities, Eddy Current Testing (ECT) and Scanning Acoustic Microscopy (SAM). Doing …

Generalizable And Adaptable Data-Driven Methods For Overcoming Barriers To Practical Industrial Condition Monitoring, Matthew B. Russell

Theses and Dissertations--Electrical and Computer Engineering

The future of smart manufacturing relies on predictive maintenance systems that intelligently minimize expensive downtime through timely assessment of machine condition. Deep Learning (DL) has achieved excellent performance in industrial condition monitoring experiments, but the constraints of the manufacturing environment prevent many algorithms from being practically deployed on the factory floor. Ubiquitous sensing from online machines generates high velocity data streams that require new techniques for efficient transmission and storage. Despite these ever-increasing data lakes, many applications still lack the data needed for training DL fault diagnosis and wear tracking models since most data is unlabeled and only from nominal …

An Unmanned Aircraft System For Marking Live Power Lines To Prevent Bird Collisions, Mattheuns D. Pretorius, Lourens Leeuwner, Kaajial Durgapersad, Constant Hoogstad, Peter Beckedahl, Michael D. Michael, Kishaylin Chetty

Human–Wildlife Interactions

Collisions with overhead power lines represent a significant cause of mortality for a number of large bird species worldwide. Certain threatened species are severely impacted by power line collisions, particularly those for which there are no other known significant threats. In South Africa, bird collisions with overhead power line cables, including collisions with phase conductors and shield wires, contribute significantly to annual threatened bird species mortalities associated with Eskom power lines. The most practical mitigation measure is to attach bird anti-collision devices as markers on the cables. Current marking methods involve installations by hand, where linemen are hoisted up to …

Ex-Ante Cost-Benefit Analysis Of High-End And Low-Cost Wireless Sensor Network (Wsn) Technology Packages For Efficient Irrigation Water Management In The Philippines, Marielle Q. Aringo, Victor B. Ella, Camille G. Martinez, Gamiello S. Pereira

Journal of Economics, Management and Agricultural Development

Four wireless sensor network (WSN) technology packages developed for efficient irrigation water management in the Philippines were subjected to ex-ante cost-benefit analysis (CBA) to assess their financial viability. The WSN technologies include high-end and low-cost wireless sensors for upland crop production with drip irrigation system and lowland crop production with alternate wetting and drying (AWD). Results showed that the high-end WSN technology packages are only viable for high-value crops such as red onion, bell pepper, and hot pepper. The low-cost WSN technology packages are viable for all selected crops except sweet corn. Minimum areas were also generated for each crop …

Advancing Statistical Learning And Decision Modeling Using Irregularly-Sampled Multivariate Data For Managing Respiratory Diseases, Maryam Alimohammadi

Graduate Theses and Dissertations

Complex healthcare systems require efficient and effective data-driven decision making in various aspects. As patient data becomes more available, advanced statistical learning and machine learning techniques are applied to improve data-driven decision making. However, patient health data, including clinical trial data, medical records, and electronic health records, are associated with several challenges. Patient health data includes medical information of a patient that may includedemographics, information relating to their health or illness, medications and treatments, etc. They are a combination of static and time series variables, with many censoring and missingness in the data, and are irregularly sampled in most cases. …

Machine Learning For Early Detection Of Pediatric Sepsis, Glory Manson-Endeboh

Graduate Theses and Dissertations

Sepsis is a host response to infection in both adults and children. It contributes to approximately 1.7 million cases annually with nearly 270,000 annual deaths in the United States. In the United States, the financial burden of sepsis on survivors and their families including the hospitals is over $4.8 billion, at approximately $64,280 per hospitalization. The first goal of this thesis research is to develop efficient machine learning models to predict pediatric sepsis accurately for inpatients. The second objective is to develop machine learning methods to determine how early sepsis can be detected to mitigate mortality. We examine data collected …

Smart Manufacturing—Theories, Methods, And Applications, Zhuming Bi, Lida Xu, Puren Ouyang

Information Technology & Decision Sciences Faculty Publications

(First paragraph) Smart manufacturing (SM) distinguishes itself from other system paradigms by introducing ‘smartness’ as a measure to a manufacturing system; however, researchers in different domains have different expectations of system smartness from their own perspectives. In this Special Issue (SI), SM refers to a system paradigm where digital technologies are deployed to enhance system smartness by (1) empowering physical resources in production, (2) utilizing virtual and dynamic assets over the internet to expand system capabilities, (3) supporting data-driven decision making at all domains and levels of businesses, or (4) reconfiguring systems to adapt changes and uncertainties in dynamic environments. …

Scheduling, Complexity, And Solution Methods For Space Robot On-Orbit Servicing, Susan E. Sorenson

Graduate Theses and Dissertations

This research proposes problems, models, and solutions for the scheduling of space robot on-orbit servicing. We present the Multi-Orbit Routing and Scheduling of Refuellable On-Orbit Servicing Space Robots problem which considers on-orbit servicing across multiple orbits with moving tasks and moving refuelling depots. We formulate a mixed integer linear program model to optimize the routing and scheduling of robot servicers to accomplish on-orbit servicing tasks. We develop and demonstrate flexible algorithms for the creation of the model parameters and associated data sets. Our first algorithm creates the network arcs using orbital mechanics. We have also created a novel way to …

Ensemble Tree-Based Machine Learning For Imaging Data, Reza Iranzad

Graduate Theses and Dissertations

In particular medical imaging data, such as positron emission tomography (PET), computed tomography (CT), and fluorescence intravital microscopy (IVM), have become prevalent for use in a wide variety of applications, from diagnostic purposes, tracking diseases' progress, and monitoring the effectiveness of treatments to decision-making processes. The detailed information generated by medical imaging has enabled physicians to provide more comprehensive care. Although numerous machine learning algorithms, especially those used for imaging data, have been developed, dealing with unique structures in imaging data remained a big challenge. In this dissertation, we are proposing novel statistical tree-based methods with more efficient and more …

Implementing The Cms+ Sports Rankings Algorithm In A Javafx Environment, Luke Welch

Industrial Engineering Undergraduate Honors Theses

Every year, sports teams and athletes get cut from championship opportunities because of their rank. While this reality is easier to swallow if a team or athlete is distant from the cut, it is much harder when they are right on the edge. Many times, it leaves fans and athletes wondering, “Why wasn’t I ranked higher? What factors when into the ranking? Are the rankings based on opinion alone?” These are fair questions that deserve an answer. Many times, sports rankings are derived from opinion polls. Other times, they are derived from a combination of opinion polls and measured performance. …

Supervised Representation Learning For Improving Prediction Performance In Medical Decision Support Applications, Phawis Thammasorn

Graduate Theses and Dissertations

Machine learning approaches for prediction play an integral role in modern-day decision supports system. An integral part of the process is extracting interest variables or features to describe the input data. Then, the variables are utilized for training machine-learning algorithms to map from the variables to the target output. After the training, the model is validated with either validation or testing data before making predictions with a new dataset. Despite the straightforward workflow, the process relies heavily on good feature representation of data. Engineering suitable representation eases the subsequent actions and copes with many practical issues that potentially prevent the …

Algorithm For Calculating The Parameters Of A Multi-Position Electromagnetic Linear Mechatronic Module, Nazarov Khayriddin Nuritdinovich, Matyokubov Nurbek Rustamovich, Temurbek Omonboyevich Rakhimov

Chemical Technology, Control and Management

Currently, in the world in the field of science, engineering and technology, including in mechatronics and robotics, the creation of multi-coordinate mechatronic systems that perform power and control functions is becoming of paramount importance, this is due to a number of important positive qualities of the systems, such as simplicity and compactness of the design, the possibility of obtaining significant efforts, high accuracy and stability of the establishment of fixed positions, ease of control and high reliability. This article presents the calculation of the parameters of multi-position mechatronic modules based on linear execution elements. In the construction of this model, …

Integration Of Blockchain Technology Into Automobiles To Prevent And Study The Causes Of Accidents, John Kim

Electronic Theses, Projects, and Dissertations

Automobile collisions occur daily. We now live in an information-driven world, one where technology is quickly evolving. Blockchain technology can change the automotive industry, the safety of the motoring public and its surrounding environment by incorporating this vast array of information. It can place safety and efficiency at the forefront to pedestrians, public establishments, and provide public agencies with pertinent information securely and efficiently. Other industries where Blockchain technology has been effective in are as follows: supply chain management, logistics, and banking. This paper reviews some statistical information regarding automobile collisions, Blockchain technology, Smart Contracts, Smart Cities; assesses the feasibility …

Thin Safety Margin: The Sefor Super-Prompt-Critical Transient Experiments, Ozark Mountains, Arkansas 1970–1971, Jerry Havens, Collis Geren

Arkansas Scholarly Editions

Thin Safety Margin charts the history of SEFOR, a twenty-megawatt reactor that operated for three years in the rural Ozark Mountains of Arkansas as part of an internationally sponsored program designed to demonstrate the Doppler effect in plutonium-oxide-fueled fast reactors. Authors Jerry Havens and Collis Geren draw upon this history to assess the accidental explosion risk inherent in using fast reactors to reduce the energy industry’s carbon dioxide emissions.

If a sufficiently powerful fast-neutron explosion were to cause the containment of a reactor such as SEFOR’s to fail, the reactor’s radiotoxic plutonium fuel could vaporize and escape into the surrounding …

“Surviving And Growing Up With Illegal Status”: The Analysis Of Socio–Economic Household, Potential Conflict, The Environmental Damage, And Vulnerability Of Local Community To Disaster, Sofyan Syahnur, Yossi Diantimala

Journal of Sustainable Mining

This study aims to analyze, from social-economics and environmental perspectives, how illegal gold mining survives and grows with its illegal status. Generally, illegal mining has a positive impact on the socio-economy of all parties involved. However, mining activities cause environmental damage and pollution so that the local community is vulnerable to disaster and potential conflict. This research was conducted at an illegal mining site in Aceh, the western province of Indonesia. To describe the primary data, it employs a descriptive qualitative method. The purposive sampling method is used to select key informants. The results show an increasing income of all …