Industrial Technology Commons^™

Fungi In Flux | Designing Regenerative Materials And Products With Mycelium, Arvind Bhallamudi

Masters Theses

As the world grapples with the escalating crisis of climate threats and environmental degradation, this research delves into the synergistic potential of design and biology, developing safe and sustainable materials for applications in prototyping, furniture and interior design. Harnessing the power of a unique organism - fungi, the study proposes an accessible, efficient, and resilient material resource system. It utilizes local waste streams and mycelium (the vegetative part of fungi) to grow functional structures. An experimental and small-scale protocol is modeled by testing bio-fabrication and bio-printing methods. The composites' performance qualities and characteristics are evaluated through mechanical testing and a …

Development Of Detection And Tracking Systems For Autonomous Vehicles Using Machine Learning, Tyler Ward

Morehead State Theses and Dissertations

A thesis presented to the faculty of the Elmer R. Smith College of Business and Technology at Morehead State University in partial fulfillment of the requirements for the degree of Master of Science by Tyler Ward April 25, 2023.

Improving Network Security For High Schools In Carolina, Southeastern, And South Central Conference, Eden Sampson

Campus Research Month

Cybersecurity is a very important factor that is often overlooked until one becomes a victim of hackers and viruses. One of the main institutions that are caught off guard by cyber issues are high schools. Adventist high schools often fall into this issue as well. It is very dangerous because of the sensitive information handled on school networks as well as the financial loss that cyber security attacks may cause. Moreover, just a few Adventist high schools have IT staff who are qualified to protect the school from cyberattacks or to help with recovery. Therefore, our contribution is to create …

Integration Of Blockchain Technology Into Automobiles To Prevent And Study The Causes Of Accidents, John Kim

Electronic Theses, Projects, and Dissertations

Automobile collisions occur daily. We now live in an information-driven world, one where technology is quickly evolving. Blockchain technology can change the automotive industry, the safety of the motoring public and its surrounding environment by incorporating this vast array of information. It can place safety and efficiency at the forefront to pedestrians, public establishments, and provide public agencies with pertinent information securely and efficiently. Other industries where Blockchain technology has been effective in are as follows: supply chain management, logistics, and banking. This paper reviews some statistical information regarding automobile collisions, Blockchain technology, Smart Contracts, Smart Cities; assesses the feasibility …

Estimating The Bubbling Process Of Ozone-Containing Gases In The Water, M.P. Parpiev, А.А. Simonov, Aleksey Kamardin, Abdulaziz M. Nazarov

Chemical Technology, Control and Management

Theoretical estimates were made and significant factors of dissolution of ozone-containing gases in water during bubbling in tanks were determined. The expediency of using microbubbles for more efficient saturation of water and aqueous solutions with ozone and generation of ozone with maximum concentration is shown. It is shown that when bubbling gas in water, including ozone-containing gas, the most important indicator is the volume gas content, which determines the ratio of the volume of the gas phase to the volume of the gas-liquid mixture in the contact apparatus. In the presence of a set of bubbles in the water, the …

Development Of A New Technology For Obtaining The Substance Of The Drug Acetamizole, Sarvar Saidov, Asqar Abdurazakov, Rixsibay Karimov, Mavluda Baltabayeva

Chemical Technology, Control and Management

The main goal of this work is to obtain a preparation of acetamizole based on local raw materials by a more convenient method of acylation of 2-methoxycarbonylaminobenzimidazole with glacial acetic acid, this synthesis method is proposed for the first time. On the basis of the conducted experiments, favorable conditions for the reaction were found, the influence of the nature of the acid, the temperature, the duration of the reaction and other factors on the course of the reaction was studied, the technology was developed and implemented at the experimental production of "IHRV AN RUz". Based on experiments conducted by scientists …

Dual-Axis Solar Tracker, Bryan Kennedy

All Undergraduate Projects

Renewable energies, and fuels that are not fossil fuel-based, are one of the prolific topics of debate in modern society. With climate change now becoming a primary focus for scientists and innovators of today, one of the areas for the largest amount of potential and growth is that of the capturing and utilization of Solar Energy. This method involves using a mechanical system to track the progression of the sun as it traverses the sky throughout the day. A dual-axis solar tracker such as the one designed and built for this project, can follow the sun both azimuthally and in …

Ua66/16/2 Ogden College Of Science & Engineering Ogden College Of Science & Engineering Publications, Wku Archives

WKU Archives Collection Inventories

Publications created by and about Industrial & Engineering Technology.

Ua66/16/1 Ogden College Of Science & Engineering Ogden College Of Science & Engineering Administration, Wku Archives

WKU Archives Collection Inventories

Administrative records created by Industrial & Engineering Technology.

The Rhetoric Of Science Education And Technology, Iwasan D. Kejawa

School of Computing: Faculty Publications

Nearly thousands of science experiments are performed both on humans and animals every year in the United States (Gregory, 1999). Does Science enormously play a role in the well-beings of individual in the society? Research has found that science education is through motivation and satisfying the needs of humans. The scientific world is part of an elongated human development. This can be substantiated with the use and evolution of TECHNOLOGY and SCIENCE (Minton, 2004). Education of the entities that comprise the need to achieve the goal of TECHNOLOGY and SCIENCE which are important issues of today. Research has shown that …

Development Of An Associate Degree Level Course On Lean, Jeremy Espinoza

Master of Technology Management Plan II Graduate Projects

Lean training and education has become a focal point in both industry and the realm of academics; however, the need within the industry remains, and oftentimes companies must take on the additional and high expense of training new graduates once they enter the workforce. Often, the classes that students study in the lean methodology, if any are studied at all, are taught within other disciplines, and the instruction is in a general sense as opposed to in depth and hands on. Within the past eight years it has been referenced in different academic articles that students are not coming into …

Educators’ Resistance To The Technology And Engineering Education Transition, Kenneth L. Rigler Ph.D.

Applied Technology Faculty Publications

The purpose of the qualitative grounded theory study was to explore why industrial arts educators resisted organizational change to technology and engineering education. An exploratory, grounded theory method was used to identify new theory related to educators’ resistance because the current literature did not provide a theoretical perspective about why industrial arts educators have resisted the change. The sampling frame was derived from a database of 379 secondary technology and engineering education teachers in the state of Kansas, and a sample size of 13 participants was needed to reach theoretical saturation of the phenomenon. The data for the study was …

Design Refinement By Iterative Virtual Experimentation (D.R.I.V.E.): A Methodology To Solving Engineering Design Problems, Charles M. Watson

Morehead State Theses and Dissertations

A Thesis Presented to the Faculty of the College of Science & Technology Morehead State University in Partial Fulfillment of the requirements for the Degree Master of Science by Charles M. “Matt” Watson on April 25, 2015

On Translating Technology Research Into Industrial Applications, Stephen T.C. Wong

Practical Social and Industrial Research Symposium

Using personal cases he previously experienced, Prof Wong will share with colleagues the influence of environments and market forces that drive the applied technology research into practice. The speech will be delivered in an informal, interactive format, rather than didactic.

An Investigation Of The Factors Contributing To Measurement Uncertaintly Using A Coordinate Measurement Machine, Jayson S. Minix

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science and Technology at Morehead State University in partial fulfillment of the requirements for the Degree of Master of Science in Engineering & Technology Management by Jayson S. Minix on December 3, 2014.

The Cadet Training Program Versus The Student Certification Program: A Study Of It- Support Training Programs At Western Kentucky University, Michael Courtney Moore

Masters Theses & Specialist Projects

Technology is a critical component of modern-day success. Advancements in technology have improved communication between individuals and companies. Technological advancements have allowed students to earn college degrees online. People who habitually use technology expect a high level of performance and support. As new technologies are implemented, such as complex web services or new operating systems, the dependence for information technology (IT) support grows in demand. Even learning curves can be cumbersome without proper assistance from IT professionals. Companies and institutions must accommodate user needs by implementing fast, efficient, and friendly support. In order to offer optimal customer support, representatives must …

Strategic Evaluation Of University Knowledge And Technology Transfer Effectiveness, Thien Anh Tran

Dissertations and Theses

Academic knowledge and technology transfer has been growing in importance both in academic research and practice. A critical question in managing this activity is how to evaluate its effectiveness. The literature shows an increasing number of studies done to address this question; however, it also reveals important gaps that need more research. One novel approach is to evaluate the effectiveness of this activity from an organizational point of view, which is to measure how much knowledge and technology transfer from a university fulfills the mission of the institution. This research develops a Hierarchical Decision Model (HDM) to measure the contribution …

An Investigation On How Operational Wind Turbines Are Used In Secondary Classrooms, James Smith

Dissertations and Theses @ UNI

Through a review of literature, it was found that many schools in the United States are installing operational wind turbines, but it was unclear how teachers were using them in their science, technology, engineering and mathematics (STEM) classrooms. In order to identify how these operational wind turbines were being used and to create a list of expectations for schools with operational wind turbines, this exploratory study surveyed STEM teachers from all across the United States. A stratified random sample was created using a U.S. Department of Energy database of schools with operational wind turbines. Administrators from the selected schools identified …

Application Of Intelligent-Objects Simulation To Manufacturing Process Efficiency Analysis: A Case Study, Justin Hamilton

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science and Technology at Morehead State University in partial fulfillment of the requirements for the Degree of Master of Science by Justin Hamilton on May 12, 2012.

Sustainable Purchasing Practices: An Investigation Into Current Industry Awareness And Practice., Francis X. Palisi

Purdue Polytechnic Masters Theses

This research study illustrates the growing importance of sustainable purchasing practices and answers two important questions: what is the current awareness of U.S. organizations on sustainable purchasing practices with regards to evaluating, selecting, and retaining suppliers and to what extent are these practices being implemented? The research conducted is based upon an in-depth literature review of green purchasing and sustainability initiatives. With an ever increasing global economy with no intention of slowing down it is ever important to look towards sustainability practices and the biggest impact organizations can make is in the purchasing department. The researcher begins by explaining their …

An Occupational Analysis Of Prepress In The Des Moines And Eastern Iowa Regions, Lee John Geisinger

Dissertations and Theses @ UNI

It is important that educators use a relevant, up-to-date curriculum when educating on a specific occupation. Job task analysis is an effective way for educators to understand an occupation and provide students with valuable information. This study analyzed prepress technicians' duties and tasks.

This research used the occupational analysis method called the DACUM (Developing a Curriculum) process. The DACUM process uses an expert worker panel to identify the duties and tasks of an occupation. This study found that there are 9 duties and 55 tasks for a prepress technician. After identifying the duties and tasks, the study confirmed those duties …

An Analysis Of The Potential Of Hydroelectric Power In Kentucky, Terry White

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science and Technology at Morehead State University in partial fulfillment of the requirements for the Degree of Master of Science at Morehead State University by Terry White on June 15, 2007.

Analysis Of Quality Costs For Vrp-109 And Larox Power Pf And Intensifying The Manufacturing Process, Tapani Kilpelainen

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science & Technology at Morehead State University in partial fulfillment of the requirements for the Degree of Master of Science by Tapani Kilpelainen on April 13, 2007.

Developing A New Program In Marine Engineering Technology, Anthony Dean, Gary Crossman, Alok Verma

Engineering Technology Faculty Publications

The Department of Engineering Technology, in the Batten College of Engineering and Technology at Old Dominion University, in conjunction with members of its advisory board and other industry representatives have begun a sustained effort to promote and develop a strong course of study in Marine Engineering Technology. Located in Norfolk, Virginia, Old Dominion University, and particularly the Department of Engineering Technology, is uniquely positioned to develop such a program. With strong ties to the world's largest Naval Base and superlative shipbuilding, maintenance and repair facilities, early qualitative research indicated high interest for development of such a program in support of …

The Determination Of Failure Occurring In The Stator Coil Winding Due To The Over-Voltage Using Matlab Software, Ali Reza Alavizadeh

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science & Technology at Morehead State University in partial fulfillment of the requirements for the degree of Master of Science in Vocational Education & Technology by Ali Reza Alavizadeh on December 1, 2000.

Perceived Importance Of Iso 9000 Factors As Indicators Of Quality In Industrial Technology Related Programs At Four-Year State Regional Universities, Floyd L. Olson

Dissertations and Theses @ UNI

Industry has often used a quality standard known as ISO 9000. No evidence has been located demonstrating the applicability of an industrial quality model to a singular academic department. The problem of this study was to determine if the guidelines for ISO 9004-2 could have been considered appropriate for Industrial Technology related programs and how they could have been used to indicate quality within such programs.

The purpose of this study was to seek knowledge relating the importance of ISO 9004-2 guidelines to audit and/or improve the quality management of Industrial Technology related departments at 4-year state regional universities. This …

An Unsolicited Sociotechnical Intervention In A Public System: A Participatory Action Research Approach, Ely Alfred Dorsey Jr.

Engineering Management & Systems Engineering Theses & Dissertations

This research concerns itself with Participatory Action Research in a hostile setting. The thrust is a sociotechnical one, with the intent being to enhance the capacity of the Wallop Public School System, Wallop, USA, to address its problem of racial disparate treatment of Black children. The potential for Organizational Learning among the school system's senior staff is studied. Some new theory about such hostile interventions is proposed. Also discussed are questions about reliability and construct validity within the context of the multiple role playing that an interventionist has in this setting. The role of the press is reflected in the …

The Importance Of Technology Assessment Procedures For Missionary Trainees, James Michael Hoeksema

Dissertations and Theses @ UNI

The purpose of this study was to identify those technology assessment (TA) procedures that are most important to teach to missionary trainees. This was based on the perceptions of the chief executive officers of U.S. Protestant mission agencies.

A survey was used to collect the research data. A total of 175 usable survey instruments were returned (25.6%). Analysis of the data consisted of frequency distributions and Chi-square.

A "common core" of TA procedures which are being used by mission agencies was identified. These were: (a) on-site field investigation, (b) committee meetings, (c) brainstorming, (d) personal interviews, (e) review of related …

Competencies Required Of Baccalaureate Degree Graduates From Graphic Communications Programs, Eldon B. Swanson

Dissertations and Theses @ UNI

The problem of this study was to identify and validate a list of competencies that may be used by graphic communications educators as the basis for curricula development that meets the needs of the contemporary graphic communications industry. The purpose of this study was to provide the graphic communications educator with a comprehensive, prioritized, and logically clustered list of competencies required of baccalaureate degree graduates from graphic communications programs as perceived by representatives from the graphic communications industry and graphic communications educators.

The survey instrument used for this study is based on a seven point graphic rating scale on which …

Technology Lecture Series, Russell W. Maatman

Pro Rege

No abstract provided.