Industrial Technology Commons^™

Feasibility Study Of Transitioning From Thick Plates (0.250”) Mounted On 30-Point Pvc Carriers To Thinner Plate Technologies Mounted On Recyclable Foam And Pet (0.155”) For Post-Print Corrugated, Nathaniel J. Poole

All Theses

In the United States, the most common press configuration for brown-box printing is a 0.280” undercut press. These press configurations have long relied on thick 0.250” plates mounted on 0.030” PVC sheets to print onto corrugated substrates. Each year, around twenty million pounds of waste are produced by the printing industry, through paper waste, plate waste, among other materials. One large factor of that waste is flexographic plate waste, which either ends its life in a landfill or is repurposed into other products. This study establishes a comparison between traditionally used 0.250” plates on 30pt PVC versus 0.155” plates mounted …

Analysis And Study Of Telemetry Systems For Directional And Horizontal Well Drilling, Jahongir Abdiganiyev Erkin Ugli, Sherali Halloqovich Umedov

Technical science and innovation

The article discusses the issues of reducing non-productive drilling time during the construction of directional and horizontal wells. The main focus is on the analysis of drilling conditions in complex geological and high-temperature environments. Particular attention is paid to drilling conditions in the territory of the Republic of Uzbekistan, with a specific study of data from the Boysun and Ustyurt regions. An analysis and study of the performance of telemetry systems available on the market, as well as their main technical characteristics, have been conducted. Key factors affecting the accuracy of wellbore trajectory measurements under various geological and technical conditions …

A Comprehensive Usability And Economic Analysis Of Heat-Related Wearable Technologies: Applications To Occupational Health, Ryan T. Cannady

Theses & Dissertations

The purpose of this research was to analyze the usability and economic considerations of real-time wearable technologies that are implemented in occupational settings to assess risk of heat stress and heat strain. The study population included current agriculture workers and Department of Energy (DOE), Environmental Management (EM) contractors. We employed a mixed-methods approach to comprehensively analyze the usability and economic considerations of heat-related technologies. Specifically, our approach assessed three distinct aspects the applications of these technologies in occupational settings to comprehensively address our research objective: (1) worker perceptions of heat-related wearable technologies, (2) field-based assessment of these heat-related wearable technologies, …

A Screening Life Cycle Analysis Of One-Way And Reusable Crate Designs – Estimating Environmental Impacts Via Lca Software, Nicolas R. Corona

Master's Theses

A comparison analysis conducted via COMPASS life cycle analysis software has indicated that a one-way crate design, rather than a reusable crate design, is in fact the more environmentally friendly packaging system. These results can be interpreted differently, however, as the manufacturer of said crate designs must confirm what impact indicators they would like to reference as environmental goalposts. The conducted analysis provides insight into what the environmental impacts of each packaging system look like as packaging at all three system levels has been identified as a means of reducing environmental impacts globally. As such, the manufacturer of said crate …

Fungi In Flux | Designing Regenerative Materials And Products With Mycelium, Arvind Bhallamudi

Masters Theses

As the world grapples with the escalating crisis of climate threats and environmental degradation, this research delves into the synergistic potential of design and biology, developing safe and sustainable materials for applications in prototyping, furniture and interior design. Harnessing the power of a unique organism - fungi, the study proposes an accessible, efficient, and resilient material resource system. It utilizes local waste streams and mycelium (the vegetative part of fungi) to grow functional structures. An experimental and small-scale protocol is modeled by testing bio-fabrication and bio-printing methods. The composites' performance qualities and characteristics are evaluated through mechanical testing and a …

An Unmanned Aircraft System For Marking Live Power Lines To Prevent Bird Collisions, Mattheuns D. Pretorius, Lourens Leeuwner, Kaajial Durgapersad, Constant Hoogstad, Peter Beckedahl, Michael D. Michael, Kishaylin Chetty

Human–Wildlife Interactions

Collisions with overhead power lines represent a significant cause of mortality for a number of large bird species worldwide. Certain threatened species are severely impacted by power line collisions, particularly those for which there are no other known significant threats. In South Africa, bird collisions with overhead power line cables, including collisions with phase conductors and shield wires, contribute significantly to annual threatened bird species mortalities associated with Eskom power lines. The most practical mitigation measure is to attach bird anti-collision devices as markers on the cables. Current marking methods involve installations by hand, where linemen are hoisted up to …

Ex-Ante Cost-Benefit Analysis Of High-End And Low-Cost Wireless Sensor Network (Wsn) Technology Packages For Efficient Irrigation Water Management In The Philippines, Marielle Q. Aringo, Victor B. Ella, Camille G. Martinez, Gamiello S. Pereira

Journal of Economics, Management and Agricultural Development

Four wireless sensor network (WSN) technology packages developed for efficient irrigation water management in the Philippines were subjected to ex-ante cost-benefit analysis (CBA) to assess their financial viability. The WSN technologies include high-end and low-cost wireless sensors for upland crop production with drip irrigation system and lowland crop production with alternate wetting and drying (AWD). Results showed that the high-end WSN technology packages are only viable for high-value crops such as red onion, bell pepper, and hot pepper. The low-cost WSN technology packages are viable for all selected crops except sweet corn. Minimum areas were also generated for each crop …

Thin Safety Margin: The Sefor Super-Prompt-Critical Transient Experiments, Ozark Mountains, Arkansas 1970–1971, Jerry Havens, Collis Geren

Arkansas Scholarly Editions

Thin Safety Margin charts the history of SEFOR, a twenty-megawatt reactor that operated for three years in the rural Ozark Mountains of Arkansas as part of an internationally sponsored program designed to demonstrate the Doppler effect in plutonium-oxide-fueled fast reactors. Authors Jerry Havens and Collis Geren draw upon this history to assess the accidental explosion risk inherent in using fast reactors to reduce the energy industry’s carbon dioxide emissions.

If a sufficiently powerful fast-neutron explosion were to cause the containment of a reactor such as SEFOR’s to fail, the reactor’s radiotoxic plutonium fuel could vaporize and escape into the surrounding …

“Surviving And Growing Up With Illegal Status”: The Analysis Of Socio–Economic Household, Potential Conflict, The Environmental Damage, And Vulnerability Of Local Community To Disaster, Sofyan Syahnur, Yossi Diantimala

Journal of Sustainable Mining

This study aims to analyze, from social-economics and environmental perspectives, how illegal gold mining survives and grows with its illegal status. Generally, illegal mining has a positive impact on the socio-economy of all parties involved. However, mining activities cause environmental damage and pollution so that the local community is vulnerable to disaster and potential conflict. This research was conducted at an illegal mining site in Aceh, the western province of Indonesia. To describe the primary data, it employs a descriptive qualitative method. The purposive sampling method is used to select key informants. The results show an increasing income of all …

Improving Logistics Efficiency Through Collaborative Truck Routing, Patrick Dougherty

Industrial Engineering Undergraduate Honors Theses

The logistics industry is among the world’s largest and most essential. Specifically, trucking is a massive component of the modern logistics system. In 2012, truck transportation carried 68% of all freight tonnage in the U.S. However, trucking currently faces significant problems with efficiency and sustainability. Of all miles driven by trucks yearly in the U.S., 25% are driven with empty loads and 36% are driven with underutilized loads. In addition to this economic inefficiency, the industry faces social and environmental challenges. Driver turnover rates are near 100%, and trucking accounts for a significant level of greenhouse gas emissions. One potential …

Investigation Of Anaerobic Digestion Of The Aqueous Phase From Hydrothermal Carbonization Of Mixed Municipal Solid Waste, Kameron J. Adams, Ben Stuart, Sandeep Kumar

Civil & Environmental Engineering Faculty Publications

In 2017, the United States Environmental Protection Agency (EPA) reported that Americans generated over 268 million tons of municipal solid waste (MSW). The majority (52%) of this waste ends up in landfills, which are the third largest source of anthropogenic methane emissions. Improvements in terms of waste management and energy production could be solved by integrating MSW processing with hydrothermal carbonization (HTC) and anaerobic digestion (AD) for converting organic carbon of MSW to fuels. The objectives of this study were to (a) investigate HTC experiments at varying temperatures and residence times (b) evaluate aqueous phase and solids properties, and (c) …

Dual-Axis Solar Tracker, Bryan Kennedy

All Undergraduate Projects

Renewable energies, and fuels that are not fossil fuel-based, are one of the prolific topics of debate in modern society. With climate change now becoming a primary focus for scientists and innovators of today, one of the areas for the largest amount of potential and growth is that of the capturing and utilization of Solar Energy. This method involves using a mechanical system to track the progression of the sun as it traverses the sky throughout the day. A dual-axis solar tracker such as the one designed and built for this project, can follow the sun both azimuthally and in …

Understanding And Measuring Net Positive Business Strategies, Luke Ruffner Robinson

Graduate Student Theses, Dissertations, & Professional Papers

Despite their attempts to mitigate ecological impacts through sustainability initiatives, businesses are a major cause of the world's ecological problems. Some progressive businesses are attempting to move beyond “net zero” in terms of achieving neutral environmental impacts and instead are now pursuing a goal of net positive. Net positive refers to the idea that business activities could contribute value-added benefits to earth’s ecological systems, for example, by using technologies that sequester and store carbon. However, except for a handful of high-profile corporate case studies, little is known about how companies are developing their strategies to become net positive and …

Methane Production By A Packed-Bed Anaerobic Digester Fed Dairy Barn Flush Water, Sean Richard Thomson

Master's Theses

Packed-bed digesters are an alternative to covered lagoon digesters for methane production and anaerobic treatment of dilute wastewaters such as dairy barn flush water. The physical media of packed-beds retain biofilms, often allowing increased treatment rates. Previous studies have evaluated several types of media for digestion of dilute wastewaters, but cost and media fouling have setback commercial development. A major operational cost has been effluent recirculation pumping.

In the present effort, a novel approach to anaerobic digestion of flush dairy water was developed at pilot-scale: broken walnut shells were used as a low-cost packed-bed medium and effluent recirculation was replaced …

Csp Desalination/Water Purification Unit, Sean Goodison

Industrial Technology and Packaging

An estimated 3.4 million people die each year from unsanitary water or inaccessible water supply. Most of these deaths take place in the developing, third world (99%). There is a dilemma arising on the world stage as well. The water demand/supply deficit is expected to increase significantly over the next 37 years if preemptive action isn’t taken. 97% of the world water supply is oceanic, making it an attractive solution to the water deficit. Providing autonomous, “deploy and watch” systems for utilizing sustainable energy to provide purified water for unitized low pricing has the potential to penetrate a large world …

Windmill Documentary, Timothy David Stoltenburg

Honors Capstones

Capstone submitted as a graduation requirement for the BSU Honors Program.