Industrial Technology Commons^™

Mathematical Modelling Of Nitrification And Denitrification Processes Based On Neuro-Fuzzy Bioreactor Models, Mirkhalil Agzamovich Ismailov, Boburbek Zokirjon Ugli Mannobjonov

Technical science and innovation

This paper presents the development and investigation of hybrid neural network and fuzzy models for the mathematical modelling of nitrification and denitrification processes in a biological wastewater treatment bioreactor. A comprehensive approach is proposed, integrating a mechanistic model of the ASM1/ASM2d type with neural networks (LSTM and Gaussian Process Regression), as well as a fuzzy control system based on an extended set of expert rules. A digital twin of the bioreactor was developed to allow for the prediction of the dynamic behavior of key parameters such as NH₄⁺, NO₃⁻, dissolved oxygen, etc. within a prediction range of 1 to 12 …

Mitigating Common Vulnerabilities And Exposures In Cobol-Based Critical Systems Using The Strangler-Fig Pattern, Lauren E. Caruso, Vincent J. Compeau, Assefaw H. Gebremedhin

Military Cyber Affairs

COBOL-based legacy systems continue to underpin critical infrastructure in banking and government sectors despite their age and associated cybersecurity risks. Originally developed through a Department of Defense–sponsored initiative to standardize business computing, COBOL remains widely used in mission-critical environments. However, these systems face increasing vulnerabilities due to outdated security architectures, workforce shortages, and rising maintenance costs. This paper examines cybersecurity and operational challenges associated with COBOL systems and evaluates the Strangler Fig pattern as a modernization strategy that enables incremental replacement while maintaining continuity. The findings highlight implications for financial institutions and public-sector organizations dependent on legacy infrastructure.

Llm-Generated Countermeasures For Iot Cyberattacks, James Alger, Michael Tu

Military Cyber Affairs

The rapid expansion of the Internet of Things (IoT) has introduced significant cybersecurity challenges, particularly for resource-constrained devices that traditional intrusion detection systems often fail to protect effectively. This paper proposes a novel, two-phase autonomous security pipeline designed to bridge the gap between probabilistic threat detection and deterministic network enforcement. The framework first utilizes a custom Time Series Transformer (TST) to classify multivariate network traffic and identify specific attack vectors, such as ransomware, SQL injections, and malicious file uploads. In the second phase, an agentic AI layer, comprising a locally hosted Large Language Model (LLM) orchestrated via LangGraph, processes the …

Determination Of The Content Of Water-Soluble Vitamins In The Composition Of Beet Beetroot Composition, Jasur Esirgapovich Safarov, Shakhnoza Abduvaxitovna Sultanova, Muhammad Rasul Oglu Najafli, Doston Ishmuhammat Ugli Samandarov

Chemical Technology, Control and Management

The aim of this study was to determine the content of water-soluble vitamins in various parts of beetroot (pulp, leaves and stems) that had been subjected to various drying methods in a bid to explore the effect of physical processes, i.e., the application of ultrasound, on micronutrient preservation. The experiments were performed at the Department of Service Technologies of Tashkent State Technical University, and chromatographic analysis was performed in the Institute of Bioorganic Chemistry of the Academy of Sciences of the Republic of Uzbekistan. Chromatography was performed on Agilent-1200 chromatograph with Exlipse XDB C18 column and diode array detector using …

Methods For Treating Wastewater Generated During The Production Of Basalt Fiber Using Modified Bentonite Clay, Abdurasul O'Ktamovich Husenov, Baxtiyor Toxtayevich Sabirov, Diyor Asadullayevich Xadjibayev

Chemical Technology, Control and Management

This scientific article notes that in technological processes, wastewater is contaminated with various organic and mineral substances, including poisonous and toxic substances. Sources of environmental pollution include organic and inorganic substances formed during the production of basalt fiber. In this research work, the task is set to purify wastewater formed during the production of basalt fiber from organic substances. Bentonite clay is a very good natural sorbent and has the ability to purify some cations. When conducting laboratory experiments, bentonite clays from the "Azkamar" and "Navbahor" deposits were selected to purify wastewater formed during the production of basalt fiber from …

Mathematical Models Of Magnetoelastic Acceleration Transducers Developed Based On The Theory Of Lumped Parameter Circuits, Amirov Fayzullayevich Sulton, Kamila Kamilovna Jurayeva, Shovkat Dilshodovich Turayev

Chemical Technology, Control and Management

In this article, based on the theory of lumped-parameter circuits, algebraic and differential equations describing the mechanical, electrical, and magnetic circuits of new magnetoelastic acceleration transducers, their analytical solutions, as well as mathematical models establishing the relationship between the electromotive forces at the outputs of the transducers and acceleration, which is the input quantity of the transducer, have been developed. Analysis of these mathematical models and the graphs constructed on their basis shows that under the influence of acceleration applied to the transducers, with an increase in the mechanical stresses arising in the magnetic circuit of the transducer, a redistribution …

Optimal Procedure For Measuring The Parameters Of Optical Signals Considering Noise, Yuriy Gennadyevich Shipulin, Azimjon Mamadaliyevich Xusanov

Chemical Technology, Control and Management

It has been shown that to achieve the required level of measurement accuracy and reliability, it is necessary to transition from quality control of finished products to quality management based on cost-effective methods during the stages when product properties are formed. It is shown that the complexity of measuring optical signal parameters during analysis or synthesis requires them to be considered as part of a general information processing system. Based on the nonlinear filtration method, an optimal procedure for measuring a variable position in time against a background of spatial noise was obtained. Structural diagrams of optimal measuring instruments for …

Development And Uncertainty Assessment Of Secondary Method For Ph Measurement In Physicochemical Measurements, Sarvar Rakhmatullaev, Dostonbek Xujakulov, Mohinur Nigmatova

Chemical Technology, Control and Management

In physicochemical measurements across various industries, laboratory analyses commonly require the determination of pH as an indicator of hydrogen ion activity in aqueous solutions. Ensuring the accuracy and reliability of these measurements, obtaining precise readings from pH measuring instruments, and maintaining overall measurement quality represent critical challenges in guaranteeing the safety of both products and processes. This requires constant monitoring, accuracy assessment, calibration, metrological verification, and control of measuring instruments. In this case, it should be carried out not with solutions prepared in any laboratory, but with certified reference materials (СRM) with appropriate regulatory framework, ensuring metrological observation. …

Robust-Adaptive Estimation Of Unmeasurable States And External Disturbances Of A Dynamic Object Based On An Augmented Kalman Filter, Husan Igamberdiev, Uktam Farkhodovich Mamirov, Lu Liu, Bohong Wang, Bunyod Buronov

Chemical Technology, Control and Management

The paper addresses the problem of joint estimation of the directly unmeasurable states of a dynamic object and of external disturbances when information is available only on the control inputs and on the measured output signals. To solve this problem, a robust-adaptive algorithm based on an augmented Kalman filter is proposed, in which the external disturbance is included in the extended state vector. Two operating modes of the algorithm are considered. For slowly varying disturbances, a random-walk model with a constant process-noise covariance is used, whereas for rapidly varying inputs a signal adaptation  driven by the normalized innovation is proposed. …

Fast Algorithms For Combined Synthesis Of Dynamic Object Control Systems, Isomiddin Khakimovich Siddikov, Gulchexra Alimova

Chemical Technology, Control and Management

The paper considers the issues of combined synthesis of a control system for a nonlinear dynamic object. The combined synthesis algorithms are based on the hybrid application of the theory of ordinary differential equations in the Cauchy form and the theory of automatic control. In this case, the dynamics of the control system are described in the input-output representation and by state-space equations. Algorithms for solving stabilization problems, finite control, and the inverse dynamics problem are presented in explicit form. These algorithms are based on the concept of reducibility of a general Cauchy-form system to the block-canonical Frobenius form. The …

Nonlinear System Identification Based On Fuzzy Radial Basis Neural Network With Multi-Connected Weight Connections, Kabul Khudaybergenov

Chemical Technology, Control and Management

This paper builds on our earlier radial basis function network with multiple connections (RBFMC) by placing it within a fuzzy inference framework for nonlinear system identification. The idea is inspired by the diversity of neurotransmitters found in biological neurons: instead of a single hidden-to-output weight, RBFMC gives each hidden unit a multi-dimensional connection whose components act as independent filters. Once fuzzy logic is added, each hidden neuron becomes a fuzzy rule, and its antecedent is built from several Gaussian membership functions, one per connection. The resulting Fuzzy RBFMC produces an interpretable, multi-filter description of local regions of the input space …

Performance Evaluation Of Controllers Using Fuzzy Delphi And Ahp Techniques, Kamala. R. Aliyeva, Nihad Mehdiyev, Shamil Mehdi

Chemical Technology, Control and Management

This study introduces an enhanced decision-support framework that integrates the Fuzzy Delphi method with the Analytic Hierarchy Process (AHP) to improve controller tuning and performance evaluation in uncertain environments. Traditional tuning techniques typically depend on crisp expert judgments and deterministic performance indices; however, industrial control systems are characterized by nonlinear behaviors, uncertain parameter variations, and subjective expert evaluations that are often vague or inconsistent. The Fuzzy Delphi procedure is applied to systematically gather, filter, and consolidate expert insights, enabling a refined set of performance criteria such as stability margins, robustness to disturbances, settling time, overshoot, control effort, and energy consumption …

Documentation And Project Change Management System – Honeywell Trace, Farukh Adilov, N.R Yusupbekov, Maksim Fedorovich Astafurov, Kamola Rustamovna Abdullayeva

Chemical Technology, Control and Management

The article examines modern approaches to organizing documentation and managing changes in industrial automation projects using the Honeywell Trace software platform. The evolution of documentation tools from the Documentation Tool utility within the TDC 2000/3000 system to modern intelligent solutions is described. The architecture, functional capabilities, and supported interfaces of Honeywell Trace are analyzed. Particular attention is paid to automated configuration change tracking, comprehensive search by process tags, and the detection of potential errors. The possibilities of integrating the system with industrial process control systems, controllers, auxiliary systems, and industrial communication protocols are considered. The application of Honeywell Trace during …

Spatial Analysis Of The Environmental And Climatic Explanatory Relationship Of Photovoltaic Potential For Sustainable Shrimp Farming, Dyah Lestari Widaningrum, Roikhanatun Nafi'ah, Religiana Hendarti, Alexandra Catherine Djunaedi, Evaristus Didik Madyatmadja

Journal of Environmental Science and Sustainable Development

Sustainable shrimp aquaculture requires reliable and affordable energy, particularly for coastal pond aeration. However, identifying suitable locations for photovoltaic (PV) deployment remains challenging because ground-based solar-resource measurement is expensive, spatially limited, and difficult to maintain across large coastal regions. This study develops a village-level spatial framework to evaluate PV potential for shrimp aquaculture using open geospatial datasets. The analysis covered villages across Central Java, Special Region of Yogyakarta, and East Java. PV power potential (PVout), Global Horizontal Irradiation (GHI), and Direct Normal Irradiation (DNI) were obtained from the Global Solar Atlas; land surface temperature (LST) and precipitation were derived from …

Analysis Of Technology Introduction And Re-Innovation Models Of Chinese Enterprises Based On Transnational Patent Transfer Data: A Case Study Of Strategic Emerging Industries In Shandong Province, Kun Dong, Kexin Chen, Qingxiu Mu, Zihang Cui

Journal of Scientific Information Research

[Purpose/significance] Technology introduction re-innovation is the key path for enterprises to quickly acquire advanced technologies and transform them into independent innovation advantages, which is of great significance in promoting the upgrading of the national technology innovation system and enhancing industrial competitiveness. [Method/process] This article proposes a specific approach for analyzing the technology introduction and re-innovation model of enterprises based on cros-border patent transfer data, and takes strategic emerging industries in Shandong Province as an example for empirical research, then proposes the selection strategies for enterprises technology introduction re-innovation models. [Result/conclusion] Research shows that strategic emerging industry enterprises in Shandong Province …

Integrasi Metodologi Hazop Dalam Pengendalian Risiko Dan Keberlanjutan Operasional Pada Unit Pemulihan Urea: Studi Kasus Pada Industri Pupuk, Riny Yolandha Parapat, Arin Nur'aini Putri, Aryasatya Ramadhan Sukresno

National Journal of Occupational Health and Safety

The fertilizer industry is one of the chemical sectors with high-risk potential due to its operational processes involving hazardous materials as well as extreme pressure and temperature conditions. This study aims to identify and analyze hazards in the urea recovery unit using the Hazard and Operability Study (HAZOP) method, while also formulating effective risk control strategies to support the operational sustainability of the plant. The study was conducted directly at a commercial fertilizer plant in West Java using a semi-quantitative approach, which included field observations, review of technical documents such as Process Flow Diagrams (PFD), Piping and Instrumentation Diagrams (P&ID), …

Implementation Of Kansei Engineering Method In Designing Spreadable Cheese Packaging, Novi Purnama Sari, Mega Analisa, Suci Puji Lestari, Khofifah Nur Amalia

Makara Journal of Technology

Some spreadable cheese packaging uses flexible plastic without additional features and easily damaged boxes. This packaging causes several problems, such as difficulty in re-storage, loss of product information due to damaged box packaging, wasteful use of packaging materials, and making the product less hygienic. The purpose of this study is to develop packaging that focuses on consumer emotions. The packaging was developed using the Kansei Engineering method, supported by Principal Component Analysis (PCA) as a determinant of the design concept, and Quantification Theory Type 1 (QTT1) to identify design elements. This study produced 46 packaging samples and 40 Kansei words. …

Intelligent Manufacturing Of Edible Oil: From Smart Sensing To Big Data Platform, Ru Jiang, Nadirbek Yusupbekov

Chemical Technology, Control and Management

With the rapid advancement of Industry 4.0 technologies, intelligent manufacturing and big data platforms are profoundly transforming the production models of the traditional edible oil industry. The edible oil production process involves multiple complex unit operations such as refining, decolorization, and deodorization, which impose high requirements on process control and product quality monitoring. This paper presents a systematic review of key technological advances in the field of intelligent manufacturing of edible oil, establishing a comprehensive technical framework encompassing four dimensions: smart sensing, artificial intelligence applications, IoT communication, and big data platforms. The review begins by analyzing the global background and …

Reliability Analysis Of Separator Control Systems, D.P. Muxitdinov, O.U. Sattarov, M.Sh. Nematov

Chemical Technology, Control and Management

This article aims to enhance the reliability, efficiency, and diagnostic capabilities of gas-liquid separators operating in hazardous technological processes. In the study, the separator is considered as a critical functional unit of an industrial system and is analyzed through structural and functional decomposition. The main operating parameters of the separator, including pressure drop (ΔP), separation efficiency and operational state are described on the basis of a mathematical model. In addition, a state model is developed for normal operation, foaming, liquid droplet carryover with the gas flow, and failure conditions. Emphasis is placed on diagnostic and monitoring issues, …

Data-Driven Neuro-Fuzzy Modeling And Rule Optimization For Intelligent Prediction Of Bioreactor Dynamics, Kamala Najaf Mammadzada

Chemical Technology, Control and Management

Modeling wastewater bioreactors is a challenging problem in environmental engineering because the processes are constantly changing and the microorganisms do not behave in a linear or predictable way. This makes it difficult to predict and control the system behavior. This research investigates three artificial intelligence approaches for modeling wastewater bioreactors: the Mamdani Fuzzy Inference System (FIS), the Adaptive Neuro-Fuzzy Inference System (ANFIS), and clustering-based fuzzy models. These models help us predict what is happening in the bioreactors. For instance they help us predict how the amount of substances in the water is changing over time like dS₀/dt dSs/dt …

Analysis Of Automatic Control Of The Channels And Ditches Cleaning Mechanism Based On Dynamic Indicators, Nasiba Siraj Amirbayova

Chemical Technology, Control and Management

The article deals with the automated design and experimental investigation of reinforced concrete irrigation channels and ditches, their interrelated channel-cleaning mechanisms, which are complex mechatronic systems integrating hydraulic, mechanical, and electronic components. A thorough methodology is suggested, hydrodynamic modeling, combining parametric analysis, and information-based design support to enhance channel concrete cover thickness, geometry, and cleaning system performance. Main structural parameters—involving channel depth, slope, bottom width, and concrete cover—are systematically defined and shown in matrix form to facilitate automated calculation and decision-making. Experimental prototypes and Solid Edge-based digital models are employed to verify the methodology, revealing vital interdependencies between structural parameters, …

Increasing The Prediction Accuracy Of Plant Oil Production Processes Through Adjusting The Parameters Of Machine Learning Models, Umidjon Ruziev, M.K. Shodiev, A.T. Rajabov

Chemical Technology, Control and Management

Vegetable oil production is characterized by high variability in output indicators due to nonlinear interactions between raw material parameters, equipment modes, and heat and mass transfer conditions. Existing approaches to applying machine learning in this field, as a rule, do not account for the impact of hyperparameter adjustments on forecasting quality across specific technological stages. The article presents a systematic methodology for adjusting model parameters (Ridge regression, SVR, GBM, LSTM) applied to three key tasks: predicting residual oil content in oil cake, color index during bleaching, and free fatty acid content during deodorization. In a set of 1000 observations, including …

Regular Synthesis Algorithms Of Control Devices In Nonlinear Control Systems, Husan Zakirovich Igamberdiyev, Iskandar Yusupovich Abdurakhmanov, Uktam Farkhodovich Mamirov

Chemical Technology, Control and Management

This paper examines the development of regularized algorithms for synthesizing control devices in control systems for polynomial objects, described by multidimensional Volterra functional series. The synthesis problem is solved using a two-stage procedure. In the first stage, the optimization problem is initially solved for an open-loop system. The second stage involves determining the parameters of the control device, i.e., its impulse response functions, by using the relationship between the characteristics of the open-loop and closed-loop systems. Regular algorithms are presented for finding the impulse response functions of the control device based on methods for regularizing the solution of operator equations …

Rdm Interval Arithmetic Based Weapon System Evaluation, Konul Imran Jabbarova Phd

Chemical Technology, Control and Management

For solving this issue, the paper considers a hierarchical multi-criteria decision-making problem, where the choice of a company that corresponds best to the criteria is required. Data used in this problem are presented in the form of intervals, which makes it possible to cope with uncertainty in the problem solution. Several companies working in missile production industry are chosen as alternatives for analysis. Evaluation of the selected alternatives is made based on five criteria clusters. More than twenty criteria are taken into account during evaluation.

Solving this problem is achieved with the help of the technique based on computation of …

Structural Decomposition-Based Control Synthesis For Multivariable Systems Using Oblique Projection Operators, Abdukaxxarov Inomjon Ilxom Ugli Mr, Oripjon Olimovich Zaripov, Jasur Usmonovich Sevinov

Chemical Technology, Control and Management

This paper proposes a novel approach to control synthesis for multivariable systems with algebraic constraints using oblique projection operators and their structural decomposition. The method transforms a standard control law into a structured form by decomposing the control input into constraint-satisfying and null-space components. A generalized oblique projector is constructed using a dual matrix, ensuring flexibility in shaping system properties. Furthermore, a recursive decomposition algorithm is developed, allowing the global projector to be represented as a sum of local operators corresponding to subsystem structures. The proposed framework enables modular control design, decoupling of interactions, and efficient implementation for large-scale systems. …

Conceptual Model For Protecting Personal Data By Depersonalization In Information Systems: Principles, Components, And Life Cycle, Zarina Ildarovna Azizova

Chemical Technology, Control and Management

This article presents a systematic approach to personal data protection through depersonalization in the context of regulatory pressure and growing cyber threats. It proposes a comprehensive conceptual model that formalizes the de-identification process as a manageable sequence of steps, from attribute classification and method selection to mandatory verification of the result. The article also provides a comparative analysis of existing depersonalization methods in terms of their applicability within the proposed model. The model serves as a basis for the development of specific algorithms, as demonstrated by the example of a data shuffling approach.

Implementation Of The Fourth Industrial Revolution Technologies In Tanzania’S Downstream Oil And Gas Industries, Vitalis John Mwinyi

Tanzania Journal of Engineering and Technology (TJET)

The advent of the fourth industrial revolution (IR4.0) has resulted in the digital transformation of multiple sectors of the economy due to the disruptive nature of the technologies driving the revolution. The technologies have already found their way into the oil and gas industries across the globe, especially in upstream, midstream, and downstream operations. However, the degree of implementation is not the same for these operations, considering the complexities involved, integrated process, the associated risk and investment cost, among others. This study aimed to establish the implementation level of IR4.0 technologies in the downstream operations. A survey method was employed …

Analysis And Study Of Telemetry Systems For Directional And Horizontal Well Drilling, Jahongir Abdiganiyev Erkin Ugli, Sherali Halloqovich Umedov

Technical science and innovation

The article discusses the issues of reducing non-productive drilling time during the construction of directional and horizontal wells. The main focus is on the analysis of drilling conditions in complex geological and high-temperature environments. Particular attention is paid to drilling conditions in the territory of the Republic of Uzbekistan, with a specific study of data from the Boysun and Ustyurt regions. An analysis and study of the performance of telemetry systems available on the market, as well as their main technical characteristics, have been conducted. Key factors affecting the accuracy of wellbore trajectory measurements under various geological and technical conditions …

Algorithms Of Stable Adaptive Observation Of A Multidimensional Undefinite Object, Tursunova Sadoqat Abdusalom Qizi

Chemical Technology, Control and Management

This article presents an algorithm for simultaneously estimating the parameters and state coordinates of a multidimensional control object when some of its state variables are not directly measured. The inability to measure all state variables (coordinates) of an object is a well-known drawback of identification schemes. Such conditions require the construction of adaptive state observers. This work demonstrates that when identifying the parameters of a mathematical model for an uncertain multidimensional object, the asymptotic stability of the object and the convergence of its parameters to the model parameters are ensured, provided the input vector is sufficiently informative. The construction of …

Analysis Of The Carbonization Process Of Ammoniated Brine In Ammonia-Soda Production, Nadirbek Rustambekovich Yusupbekov, Djalolitdin Paxritdinovich Mukhitdinov, Fotima Faxritdinovna Iskhakova

Chemical Technology, Control and Management

The work provides an analytical review of the current state of modeling and controlling the carbonization process of ammoniated brine. It analyzes modern methods of mathematical, simulation, and intelligent modeling of heat and mass transfer, hydrodynamics, carbonation kinetics, and crystallization. The paper considers the potential of using digital twins, neural network models, fuzzy logic devices, and hybrid models to improve forecasting accuracy and the adaptability of process solutions. Modern carbonation process control strategies are also considered. A detailed analysis is provided of predictive control (MPC), neuro-fuzzy controllers, decentralized and multivariate control systems that ensure stable column operation under disturbances, optimize …