Nanoscience and Nanotechnology Commons^™

Energy Band Engineering Using Polarization Induced Interface Charges In Mocvd Grown Iii-Nitride Heterojunction Devices, Neeraj Tripathi

Legacy Theses & Dissertations (2009 - 2024)

Characteristics of III-nitride based heterojunction devices are greatly influenced by the presence of high density of polarization induced interface charges. Research undertaken in the current doctoral thesis demonstrates the effect of presence of one, three and six sheets of polarization induced charges in three different III-nitride based devices, namely in a photocathode, a high electron mobility transistor (HEMT) and a hyperspectral detector structure. Through a systematic set of experiments and theoretical modeling an in-depth study of the interaction between multiple sheets of polarization induced charges and their impact on energy band profile was undertaken. Various device designs were studied and …

Development Of High Band Gap Absorber And Buffer Materials For Thin Film Solar Cell Applications, Daniel Dwyer

Legacy Theses & Dissertations (2009 - 2024)

CuInGaSe₂ (CIGS) device efficiencies are the highest of the thin film absorber materials (vs. CdTe, α-Si, CuInSe₂). However, the band gap of the highest efficiency CIGS cells deviates from the expected ideal value predicted by models. Widening the band gap to the theoretically ideal value is one way to increase cell efficiencies. Widening the band gap can be accomplished in two ways; by finding a solution to the Ga-related defects which limit the open circuit voltage at high Ga ratios, or by utilizing different elemental combinations to form an alternative high band gap photoactive Cu-chalcopyrite (which includes …

Fluorinated Acid Amplifiers For Extreme Ultraviolet Lithography, Seth Aaron Kruger

Legacy Theses & Dissertations (2009 - 2024)

Extreme ultraviolet lithography (EUV) is a promising candidate for next generation lithography. Although EUV has great potential there are still many challenges that must be solved before the technology can be implemented in the high volume manufacturing of semiconductor devices. The lithographic performance of EUV photoresists is one aspect that requires improvement. Particularly, EUV resists need simultaneous improvements in three properties: resolution, line-edge-roughness and sensitivity. The incorporation of acid amplifiers (AAs) in resists is one method to improve all three properties.

Negative Pressure Characteristics Of An Evaporating Meniscus At Nanoscale, Shalabh Maroo, J N. Chung

Mechanical and Aerospace Engineering - All Scholarship

This study aims at understanding the characteristics of negative liquid pressures at the nanoscale using molecular dynamics simulation. A nano-meniscus is formed by placing liquid argon on a platinum wall between two nanochannels filled with the same liquid. Evaporation is simulated in the meniscus by increasing the temperature of the platinum wall for two different cases. Non-evaporating films are obtained at the center of the meniscus. The liquid film in the non-evaporating and adjacent regions is found to be under high absolute negative pressures. Cavitation cannot occur in these regions as the capillary height is smaller than the critical cavitation …

Magneto-Dielectric Polymer Nanocomposite Engineered Substrate For Rf And Microwave Antennas, Cesar A. Morales

USF Tampa Graduate Theses and Dissertations

This dissertation presents the first reported systematic investigation on the implementation of multilayer patch antennas over Fe3O4-based polymer nanocomposite (PNC) magneto-dielectric substrates. The PNC substrate is created by the monodispersion of Fe3O4 nanopthesiss, with mean size of 7.5nm, in a polymeric matrix of Polydimethylsiloxane (PDMS).

Recently, magneto-dielectric substrates have been proposed by several researchers as a means for decreasing the size and increasing the bandwidth of planar antennas. Nevertheless, factors such as high loss and diminished control over magnetic and dielectric properties have hindered the optimal performance of antennas. In addition, the incompatibility and elevated complexity prevents integration of conventional …

Design, Synthesis And Test Of Reversible Circuits For Emerging Nanotechnologies, Himanshu Thapliyal

USF Tampa Graduate Theses and Dissertations

Reversible circuits are similar to conventional logic circuits except that they are built from reversible gates. In reversible gates, there is a unique, one-to-one mapping between the inputs and outputs, not the case with conventional logic. Also, reversible gates require constant ancilla inputs for reconfiguration of gate functions and garbage outputs that help in keeping reversibility. Reversible circuits hold promise in futuristic computing technologies like quantum computing, quantum dot cellular automata, DNA computing, optical computing, etc. Thus, it is important to minimize parameters such as ancilla and garbage bits, quantum cost and delay in the design of reversible circuits.

The …

Nonuniformity In Lattice Contraction Of Bismuth Nanoclusters Heated Near Its Melting Point, A. Esmail, M. Abdel-Fattah, Hani E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

The structural properties of bismuth nanoclusters were investigated with transmission high-energy electron diffraction from room temperature up to 525 ± 6 K. The Bi nanoclusters were fabricated by thermal evaporation at room temperature on transmission electron microscope grids coated with an ultrathin carbon film, followed by thermal and femtosecond laser annealing. The annealed sample had an average cluster size of ∼14 nm along the minor axis and ∼16 nm along the major axis. The Debye temperature of the annealed nanoclusters was found to be 53 ± 6 K along the [012] direction and 86 ± 9 K along the [110] …

Precise Control Of Highly Ordered Arrays Of Nested Semiconductor/Metal Nanotubes, Diefeng Gu, Helmut Baumgart, Kandabara Tapily, Pragya Shrestha, Gon Namkoong, Xianyu Ao, Frank Müller

Electrical & Computer Engineering Faculty Publications

Lithographically defined microporous templates in conjunction with the atomic layer deposition (ALD) technique enable remarkable control of complex novel nested nanotube structures. So far three-dimensional control of physical process parameters has not been fully realized with high precision resolution, and requires optimization in order to achieve a wider range of potential applications. Furthermore, the combination of composite insulating oxide layers alternating with semiconducting layers and metals can provide various types of novel applications and eventually provide unique and advanced levels of multifunctional nanoscale devices. Semiconducting TiO₂ nanotubes have potential applications in photovoltaic devices. The combination of nanostructured semiconducting materials …

Achieving High Efficiency Laminated Polymer Solar Cell With Interfacial Modified Metallic Electrode And Pressure Induced Crystallization, Yongbo Yuan, Yu Bi, Jinsong Huang

Department of Mechanical and Materials Engineering: Faculty Publications

We report efficient laminated organic photovoltaic device with efficiency approach the optimized device by regular method based on Poly(3-hexylthiophene-2,5-diyl) and [6,6]-phenyl-C₆₁-butyric acid methyl ester (PCBM). The high efficiency is mainly attributed to the formation of a concrete polymer/metal interface mechanically and electrically by the use of electronic-glue, and using the highly conductive and flexible silver film as anode to reduce photovoltage loss and modifying its work function for efficiency hole extraction by ultraviolet/ozone treatment, and the pressure induced crystallization of PCBM.

In Vitro Models For Glaucoma Research: Effects Of Hydrostatic Pressure, Yuan Lei, Shadi Rajabi, Ryan M. Pedrigi, Darryl R. Overby, A. Thomas Read, C. Ross Ethier

Department of Mechanical and Materials Engineering: Faculty Publications

PURPOSE. The response of cells (e.g., optic nerve head [ONH] cells) to mechanical stress is important in glaucoma. Studies have reported the biological effects of hydrostatic pressure on ONH cells cultured on a rigid substrate. An apparatus, designed to independently vary hydrostatic pressure and gas tension (including oxygen tension) in culture medium, was used to evaluate the effects of pressure and tension on cell migration, shape, and α-tubulin architecture in a transformed cell line (DITNC1 rat cortical astrocytes).

METHODS. During the assay period, cells were exposed to one of four experimental configurations: (1) control pressure and control gas tension; (2) …

Impact Of Elliptical Trainer Ergonomic Modifications On Perceptions Of Safety, Comfort, Workout, And Usability For People With Physical Disabilities And Chronic Conditions, Judith M. Burnfield, Yu Shu, Thad W. Buster, Adam P. Taylor, Carl A. Nelson

Department of Mechanical and Materials Engineering: Faculty Publications

Background The popularity of elliptical training has grown in rehabilitation, fitness, and home settings as a means for improving fitness and walking, yet many people with physical disabilities and chronic conditions experience difficulties when trying to use elliptical trainers.

Objective The purpose of this study was to compare, for people with disabilities and chronic conditions, perceptions of safety, comfort, workout, and usability of 4 elliptical trainers before and after the development of a set of low-cost adaptations.

Design This study was a quasi-experimental repeated-measures investigation.

Methods Twenty adults with diverse medical conditions and functional abilities evaluated 4 elliptical trainers for …

Use Of Environmental Scanning Electron Microscopy For In Situ Observation Of Interaction Of Cells With Micro- And Nanoprobes, Alexander Goponenko, B. J. Boyle, K. I. Jahan, Maxim V. Gerashchenko, Dmitri E. Fomenko, Vadim N. Gladyshev, Yuris A. Dzenis

Department of Mechanical and Materials Engineering: Faculty Publications

Precision intracellular sensing, probing and manipulation offer unprecedented opportunities for advances in biological sciences. Next-generation ultra-fine probes will be capable of targeting individual cell organelles. Development of such probes as well as probes capable of penetrating through tough cell walls requires detailed knowledge of cell-probe interaction. This Letter evaluated the applicability of environmental scanning electron microscopy (ESEM) for cell and cell-probe interaction imaging. Several types of cells (plant and yeast cells as well as mouse spermatozoa) were successfully imaged in their natural state, with mouse spermatozoa observed by ESEM for the first time. Computerized stage applied to image was tough …

Nanomechanical Analysis Of Insulinoma Cells After Glucose And Capsaicin Stimulation Using Atomic Force Microscopy, Ruiguo Yang, Ning Xi, King Wai-Chu Lai, Bei-Hua Zhong, Carmen Kar-Man Fung, Chen-Geng Qu, Donna H. Wang

Department of Mechanical and Materials Engineering: Faculty Publications

Aim: Glucose stimulates insulin secretion from pancreatic islet β cells by altering ion channel activity and membrane potential in the β cells. TRPV1 channel is expressed in the β cells and capsaicin induces insulin secretion similarly to glucose. This study aims to investigate the biophysical properties of the β cells upon stimulation of membrane channels using an atomic force microscopic (AFM) nanoindentation system.

Methods: ATCC insulinoma cell line was used. Cell stiffness, a marker of reorganization of cell membrane and cytoskeleton due to ion channel activation, was measured in real time using an integrated AFM nanoindentation system. Cell height that …

Streaming Potential Generated By A Pressure-Driven Flow Over Superhydrophobic Stripes, Hui Zhao

Mechanical Engineering Faculty Research

The streaming potential generated by a pressure-driven flow over a weakly charged slip-stick surface [the zeta potential of the surface is smaller than the thermal potential (25 mV)] with an arbitrary double layer thickness is theoretically studied by solving the Debye–Huckel equation and Stokes equation. A series solution of the streaming potential is derived. Approximate expressions for the streaming potential in the limits of thin double layers and thick double layers are also given in excellent agreement with the full solution. To understand the impact of the slip, the streaming potential is compared against that over a homogeneously charged smooth …

Thermophysical Characterization Of Nanofluids Through Molecular Dynamic Simulations, John Shelton

USF Tampa Graduate Theses and Dissertations

Using equilibrium molecular dynamics simulations, an analysis of the key thermophysical properties critical to heat transfer processes is performed. Replication of thermal conductivity and shear viscosity observations found in experimental investigations were performed using a theoretical nanopthesis-fluid system and a novel colloid-fluid interaction potential to investigate the key nanofluid parameters. Analysis of both the heat current (thermal conductivity) and stress (shear viscosity) autocorrelation functions have suggested that the dominant physical mechanisms for thermal and momentum transport arises from enhancements to the longitudinal and transverse acoustic modes energy transfer brought about by the increased mass ratio of the nanopthesis to the …

The Synthesis And Host-Guest Applications Of Synthetic Receptor Molecules, Zachary Richard Osner

Dissertations

Host-guest chemistry involves the complimentary binding between two molecules. Host molecules have been synthesized to bind negative, positive, and neutral molecules such as proteins and enzymes, and have been used as optical sensors, electrochemical sensors, supramolecular catalysts, and in the pharmaceutical industry as anti-cancer agents.1 The field of nanoscience has exploited guest-host interactions to create optical sensors with colloidal gold and Dip-Pen nanolithography technologies. Gold nanoparticles, have been functionalized with DNA, and have been developed as a selective colorimetric detection system, that upon binding turns the solution from a red to blue in color.2

Cyclotriveratrylene (CTV) 1 is a common …

Fabrication And Characterization Of Electrospun Cactus Mucilage Nanofibers, Yanay Pais

USF Tampa Graduate Theses and Dissertations

This work seeks to fabricate, optimize, and characterize nanofibers of cactus Opuntia ficus-indica mucilage and Poly (vinyl alcohol) (PVA) by electrospinning. Mucilage is a neutral mixture of sugars produced by cactus and PVA is a non-toxic, water-soluble, synthetic polymer, which is widely used as a co-spinning agent for polymers. Mucilage was extracted from the cactus pad and prepared for electrospinning by mixing with acetic acid. Two types of PVA were used differentiating in high and low molecular weights. Concentrations of PVA were varied to find an adequate threshold for fiber formation. Changing the ratio of PVA to cactus mucilage produced …

Sub-Cooled Pool Boiling Enhancement With Nanofluids, Elliott Charles Rice

USF Tampa Graduate Theses and Dissertations

Phase-change heat transfer is an important process used in many engineering thermal designs. Boiling is an important phase change phenomena as it is a common heat transfer process in many thermal systems. Phase change processes are critical to thermodynamic cycles as most closed loop systems have an evaporator, in which the phase change process occurs. There are many applications/processes in which engineers employ the advantages of boiling heat transfer, as they seek to improve heat transfer performance. Recent research efforts have experimentally shown that nanofluids can have significantly better heat transfer properties than those of the pure base fluids, such …

Localized Surface Plasmon Resonance Of Single Silver Nanoparticles Studied By Dark-Field Optical Microscopy And Spectroscopy, Wei Cao, Tao Huang, Xiao-Hong Nancy Xu, Hani E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

Localized surface plasmon resonance (LSPR) of Ag nanoparticles (NPs) with different shapes and disk-shaped Ag NP pairs with varying interparticle distance is studied using dark-field optical microscopy and spectroscopy (DFOMS). Disk-, square-, and triangular-shaped Ag NPs were fabricated on indium tin oxide-coated glass substrates by electron beam lithography. The LSPR spectra collected from single Ag NPs within 5×5 arrays using DFOMS exhibited pronounced redshifts as the NP shape changed from disk to square and to triangular. The shape-dependent experimental LSPR spectra are in good agreement with simulations using the discrete dipole approximation model, although there are small deviations in the …

Studies On The Preparation And Luminescence Properties Of Cadmium Selenide Quantum Dots, Their Immobilization, And Applications., Travis Justin Heath

Electronic Theses and Dissertations

Quantum dots are semiconductive particles whose properties are highly influenced by the presence of at least one electron. Cadmium selenide quantum dots were synthesized via colloidal synthesis. Contrary to previous preparations, more focus was placed on the temperature rather than the duration of time at which they form. A series of colored solutions were obtained because the excited quantum dots of various sizes emitted specific wavelengths of light. The emission spectra showed that the temperature-dependent quantum dots were successfully synthesized. The quantum dots were also immobilized on various surfaces, and the luminescence properties were examined. The quantum dots that were …

Universality Of Non-Ohmic Shunt Leakage In Thin-Film Solar Cells, Sourabh Dongaonkar, J. D. Servaites, G. M. Ford, S. Loser, R. M. Gelfand, H. Mohseni, Hugh Hillhouse, R. Agrawal, M. A. Ratner, T. J. Marks, Mark S. Lundstrom, Muhammad A. Alam

Other Nanotechnology Publications

We compare the dark current-voltage (IV) characteristics of three different thin-film solar cell types: hydrogenated amorphous silicon (a-Si:H) p-i-n cells, organic bulk heterojunction (BHJ) cells, and Cu(In, Ga)Se-2 (CIGS) cells. All three device types exhibit a significant shunt leakage current at low forward bias (V < similar to 0.4) and reverse bias, which cannot be explained by the classical solar cell diode model. This parasitic shunt current exhibits non-Ohmic behavior, as opposed to the traditional constant shunt resistance model for photovoltaics. We show here that this shunt leakage (I-sh), across all three solar cell types considered, is characterized by the following common phenomenological features: (a) voltage symmetry about V = 0, (b) nonlinear (power law) voltage dependence, and (c) extremely weak temperature dependence. Based on this analysis, we provide a simple method of subtracting this shunt current component from the measured data and discuss its implications on dark IV parameter extraction. We propose a space charge limited (SCL) current model for capturing all these features of the shunt leakage in a consistent framework and discuss possible physical origin of the parasitic paths responsible for this shunt current mechanism. (C) 2010 American Institute of Physics. [doi:10.1063/1.3518509]

Synthesis, Stabilization, And Characterization Of Metal Nanoparticles, Gregory White Ii

All Dissertations

Wet chemical synthesis techniques offer the ability to control various nanoparticle characteristics including size, shape, dispersibility in both aqueous and organic solvents, and tailored surface chemistries appropriate for different applications. Large quantities of stabilizing ligands or surfactants are often required during synthesis to achieve these nanoparticle characteristics. Unfortunately, excess reaction byproducts, surfactants, and ligands remaining in solution after nanoparticle synthesis can impede application, and therefore post-synthesis purification must be employed. A liquid-liquid solvent/anti-solvent pair (typically ethanol/toluene or ethanol/hexane for gold nanoparticles, GNPs) can be used to both purify and size-selectively fractionate hydrophobically modified nanoparticles. Alternatively, carbon dioxide may be used …

Uncertainty Propagation In A Multiscale Model Of Nanocrystalline Plasticity, Marisol Koslowski, Alejandro Strachan

PRISM: NNSA Center for Prediction of Reliability, Integrity and Survivability of Microsystems

We characterize how uncertainties propagate across spatial and temporal scales in a physicsbased model of nanocrystalline plasticity of fcc metals. Our model combines molecular dynamics (MD) simulations to characterize atomic level processes that govern dislocation basedplastic deformation with a phase field approach to dislocation dynamics (PFDD) that describes how an ensemble of dislocations evolve and interact to determine the mechanical response of the material. We apply this approach to a nanocrystalline Ni specimen of interest in micro-electromechanical (MEMS) switches. Our approach enables us to quantify how internal stresses that result from the fabrication process affect the properties of dislocations (using …

Generalized Ellipsometry On Sculptured Thin Films Made By Glancing Angle Deposition, Daniel Schmidt

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

In this thesis, physical properties of highly optically and magnetically anisotropic metal sculptured thin films made by glancing angle deposition are presented. Predominantly, the determination of optical and magneto-optical properties with spectroscopic generalized Mueller matrix ellipsometry and homogenization approaches is discussed. Nomenclatures are proposed to unambiguously identify the sculptured thin film geometry.

Generalized ellipsometry, a non-destructive optical characterization technique, is employed to determine geometrical structure and anisotropic dielectric properties of highly spatially coherent three-dimensionally nanostructured thin films in the spectral range from 400 to 1700 nm. The analysis of metal slanted columnar thin films (F1-STFs) deposited at glancing angle ( …

Molecular Physics Of Electrical Double Layers In Electrochemical Capacitors, Guang Feng

All Dissertations

At present, electrochemical capacitors (ECs) are emerging as a novel type of energy storage devices and have attracted remarkable attention, due to their key characteristics, such as high power density and excellent durability. However, the moderate energy density of ECs restricts their widespread deployment in everyday technology. To surmount this limitation, four strategies are adopted: (1) to reduce the total system mass, (2) to increase the specific surface area of electrodes, (3) to enhance normalized capacitance, and (4) to expand the range of potentials applied on electrodes. The implementation of these approaches critically relies on the fundamental understanding of physical …

Small-Scale Solutions To Grand Challenges In Thermal Management, Suresh V. Garimella

Birck and NCN Publications

Research needs in the field of thermal management of microelectronics and microsystems are identified, followed by a brief discussion of recent advances in solution approaches. These include novel solutions that rely on two-phase flow at the microscale, micropumps, droplet actuation on structured surfaces, passive transport in wick structures, ion-driven and piezoelectrically driven airflow, nanostructured thermal materials, and novel diagnostic tools.

Photoelectrochemical Properties Of N, S, And Cl Modified Nano Tio2 Thin Films, Hong Yun, Chang-Jian Lin, Jing Li, Rong-Gui Du

Journal of Electrochemistry

The nitrogen(N),sulfur(S) and chlorine(Cl) modified nano TiO₂ thin films were prepared by adding Ti(O-n-Bu)₄ as the precursor into concentrated HNO₃,H₂SO₄ and HCl Solutions,respectively,on different substrates in a sol-gel process.The photoelectrochemical performances of N,S and Cl modified nano TiO₂ thin films have been studied by UV-vis(DRS),photocurrent curves,EIS and OCP-time curves.N-modified TiO₂ nano films show better surface structure,which helps to improve the quantum efficiency of nano TiO₂ thin films.

Study Of The 11-Ferrocenylalkanethiol Redox-Induced Structure Changes By Flow-Injection Electrochemical Surface Plasmon Resonance, Xiu-Juan Xiao, Yong-Hui He, Juan Xiang, Bin Ren

Journal of Electrochemistry

Redox-induced orientation changes of self-assembled monolayers(SAMs) of 11-ferrocenylundecanethiol(FcC₁₁SH) were studied by the flow-injection electrochemical surface plasmon resonance(FI-EC-SPR).Results indicated that there existed two mechanisms concerning the redox-induced structure change of the self-assembled monolayer of ferrocenylalkanethiols:the electrostatic repulsion between the positively charged surface and the ferricenium cation and that among the cations led to a decrease in the tilt angle of the alkanethiol chain;upon Fc oxidation,the Fc group rotated from a tilted conformation to a position where the cyclpentyldiene plane became perpendicular to the electrode.

Synthesis Of Mild–Hard Aao Templates For Studying Magnetic Interactions Between Metal Nanowires, Jin-Hee Lim, Aurelian Rotaru, Seong-Gi Min, Leszek Malkinski, John B. Wiley

Physics Faculty Publications

The sequential application of mild and hard anodization techniques in the fabrication of porous aluminamembranes allows one to decrease the number of continuous pores in anodized aluminium oxide (AAO) templates. Initially, standard mild anodization techniques were used to create porous templates with 100 nm interpore distances and 70 nm pore diameters. Hard anodization treatment on the same membrane then produced interpore distances of about 265 nm with diameters of 110 nm. At the interface between the two anodization steps, many of the mild-side pores were terminated to create a mild–hard membrane (Mi–Ha AAO) where the functional interpore distances were 200–300 …

Surface Morphology Of Platelet Adhesion Influenced By Activators, Inhibitors And Shear Stress, Melanie Groan Watson

Doctoral Dissertations

Platelet activation involves multiple events, one of which is the generation and release of nitric oxide (NO), a platelet aggregation inhibitor. Platelets simultaneously send and receive various agents that promote a positive and negative feedback control system during hemostasis. Although the purpose of platelet-derived NO is not fully understood, NO is known to inhibit platelet recruitment. NO's relatively large diffusion coefficient allows it to diffuse more rapidly than platelet agonists. It may thus be able to inhibit recruitment of platelets near the periphery of a growing thrombus before agonists have substantially accumulated in those regions.

Results from two studies in …