Nanoscience and Nanotechnology Commons^™

Harnessing Tio2-Based Nanofilaments: A Pathway To Enhanced Optoelectronic Performance In Dye-Sensitized And Perovskite Light Harvesters, Zahraa Ismail, Tarek A. Elmelegy, Hassan Nageh, Sameh Abdellatif

Mechanical Engineering

This study explores the integration of TiO2-based nanofilaments into dye-sensitized solar cells (DSSCs) and perovskite solar cells (PSCs) to enhance their optoelectronic performance. Despite the advancements in one-dimensional lepidocrocite TiO2 nanofilaments, there remains a significant gap in understanding their optical scattering mechanisms and dual applicability in both types of solar cells. We synthesized TiO2 nanofilaments and compared their performance to conventional P25 TiO2 in terms of morphology, electrical, and optical properties. The results indicate that the DSSC utilizing nanofilaments achieved a short-circuit current density of 8.2 mA/cm² and a power conversion efficiency (PCE) of 6.9%, compared to 7.1 mA/cm² and …

Advancing Sustainable Co2 Mitigation: Experimental And Computational Analysis Of Thermal Carbon Chitosan Sorbent For Automotive Exhaust Capture, Dalia A. Ali Dr., Amir Ahmed Elgamal Eng., Rania Rushdy Moussa Dr.

Chemical Engineering

This study investigated the efficiency of thermal carbon chitosan (TCCS) sorbent for CO2 capture from vehicle exhaust emissions within a designed adsorption system. TCCS was synthesized and meticulously characterized using a series of analytical techniques, including Brunauer-Emmett-Teller (BET) surface area analysis, Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), Ther- mogravimetric Analysis (TGA), Energy Dispersive X-ray Spectroscopy (EDX), and Differential Scanning Calo- rimetry (DSC). The TCCS adsorbent showed high thermal stability and a heating value (HHV) of 23.5 MJ/kg. Adsorption isotherm study demonstrated that the maximum capacity of CO2 adsorption is 0.084 kg.CO2/kg. TCCS, as well …

Melamine-Based Polymer Nanofibers For Supercapacitors, Samar A. Salim, Hani Nasser Abdelhamid

Nanotechnology Research Centre

This investigation describes the synthesis, electrospinning, and characterization of melamine-glutaraldehyde (MAGA) polymer composites with polymethyl methacrylate (PMMA) for supercapacitors applications. Electrospun fibers are generated by combining the MAGA polymer with PMMA at varying concentrations (2.5 %, 5 %, and 10 wt%). The synthesis of the polymer, its morphological attributes, and structural features are validated by characterization methods e.g., XRD, TEM, SEM, and FT-IR. In a three-electrode configuration, the electrochemical performances of the prepared electrodes are assessed using cyclic voltammetry (CV), galvanostatic charge-discharge (GCDC), and linear sweep voltammetry (LSV). The results suggest that the 5 % MAGA-PMMA composite has a specific …

Methane Partial Oxidation With Ni-Mg-Al Hydrotalcites: Impact Of Magnesium On Catalyst Performance, Dalia A. Ali Dr.

Chemical Engineering

The partial oxidation of methane (POM) is a promising route for hydrogen-rich syngas production with lower energy requirements compared to steam reforming. Herein, Ni-incorporated Mg-Al hydrotalcite- derived mixed oxide catalysts (5Ni-HT-x, x = 60, 65, 70, 75 wt.% Mg) were synthesized via co-precipitation and evaluated for CH₄ conversion and H₂ yield. Characterization techniques, including X-ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), BET, H₂-TPR, TEM, FTIR, TGA, and Raman spectroscopy, were employed to investigate catalyst structure, active site stability, and carbon deposition. As a constituent of hydrotalcite-derived mixed oxides (HT), Ni2+ is strongly bound within the hydrotalcite- derived mixed oxides structure, …

Upcycling Waste To Wealth: Cuo-Sio₂/Reduced Graphene Nanocomposite From Pomegranate Peels For One-Pot Low-Temperature Conversion Of Waste Oils Into Valuable Fatty Acid Monomers, Attia Attia, Shahenda Mahran Dr., Maria Centeno Prof., Basudeb Saha

Petroleum Engineering and Gas

and hence reduce the price of the fatty acid monomers. This study reports for the first time a novel, environmentally benign, highly active copper oxide-silica oxide/reduced graphene oxide (CuO-SiO2/RGO), heterogeneous nano-catalyst derived from waste pomegranate peels, for the one-pot, low-temperature synthesis of fatty acid monomers from high-acid-value waste vegetable oil (WVO). The synthesised nano-catalyst was extensively characterised using XRD, FT-IR, TEM, SEM, EDX and TGA-DTA. Further, it was utilised to synthesise fatty acidrich oleic phenoxypropyl acrylate (OPA) monomer from high acid value WVO via a single-step reaction.

Boosted Electrochemical Oxidation Of Methanol At Feox/Pd/Au Ternary Nanocatalyst, Ghada El-Nowihy

Chemical Engineering

In this paper, a highly effective catalyst for methanol electrochemical oxidation (MEO) was developed by the sequential deposition of spherical gold nanoparticles (nano-Au) on a glassy carbon (GC) rod’s surface followed by palladium nanoparticles (nano-Pd), then, iron oxide nanoparticles (nano-FeOx) to form FeOx/Pd/Au/GC catalyst. The sequence of catalyst’s layers proved crucial in optimizing its performance towards MEO. Notably, FeOx/Pd/Au/GC electrode produced a remarkable enhancements in the catalytic activity (by 7 times) and stability (approximately 16 fold) when compared to those produced at Pd/GC rod. Additionally, the onset potential for MEO was significantly reduced by approximately 40 mV. Through material and …

Synergistic Enhancement Of Tribological Behavior And Colloidal Stability In Cuo Nanolubricants Via Ligand Tuning, Sherif Elsoudy, Sayed Akl Akl Dr, Sayed Akl A. Akl Dr, Esm Lane, Abas Hadawey, Philip D. Howes

Mechanical Engineering

Nanoparticle-based lubricants, or nanolubricants, can exhibit superior tribological properties compared to unmodified base oils. However, these performance gains are highly dependent on the nanoparticle surface chemistry, particularly in maintaining stable colloidal dispersions. This study explores the influence of oleic acid (OA) and oleylamine (OAm) functionalization on the tribological and colloidal properties of CuO nanoparticles dispersed in an SAE 20W50 base oil. We present a hybrid optimization framework combining Response Surface Methodology (RSM) with Bayesian Optimization (BO) to identify the optimal OA to OAm ratio (OA–OAm) for CuO nanolubricants. Unlike prior studies that employed either RSM alone or trial-and-error approaches, this …

Experimentally Driven Numerical Model Of Carbon/Polyaniline-Based Glucose Monitoring Sensors: An Evaluation Using A New Figure Of Merit, Ziad Khalifa, Kyrillos Selim, Amira Ali, Sameh Abdellatif

Chemical Engineering

This study presents an experimentally driven numerical model for evaluating carbon/polyaniline (PANI)- based glucose monitoring sensors (GMSs), focusing on innovative configurations using graphene-PANI and carbon nanotube (CNT)-PANI composites. We performed a thorough analysis of the morphological, electrophysical, and electrical properties of these materials, ultimately leading to the extraction of key electrical parameters for integration into a finite element model (FEM). This model simulates the entire sensor, enabling the estimation of critical performance metrics such as sensitivity, limit of detection (LOD), linearity, and power consumption. Our findings demonstrate that the CNT-PANI configuration significantly outperforms the laser-induced graphene (LIG)-PANI electrode, achieving a …

Exploring The Impact Of Multiwall Carbon Nanotubes On Enhancing Water-Based Mud Performance, Attia Attia, Mohamed Saad Elhossieny Dr., Hesham Abuseda Dr., Ahmed Gouish Prof., Adel Salem Prof.

Petroleum Engineering and Gas

Drilling fluids are critical components in hydrocarbon and geothermal well construction, particularly in extreme downhole environments such as deep reservoirs and high-temperature geothermal systems. Key challenges in designing water-based drilling muds (WBDM) for these applications include effective thermal management, maintenance of rheological stability, and enhancement of thermal conductivity under high-temperature, high-pressure (HTHP) conditions. Recent advances in nanotechnology suggest that nanoscale additives, such as uniformly dispersed carbon nanotubes (CNTs), can significantly improve the thermorheological performance of drilling fluids compared to conventional formulations. However, stabilizing critical fluid properties—including viscosity, filtration efficiency, mud cake integrity, and gel strength—remains a persistent challenge in WBDM …

Experimental Study For Improving Oil Recovery Using Organic Alkaline And Nano-Silica For An Egyptian Oil Field, Attia Attia, Mohamed Sadek Hamedi Al, Mayar Abdelrahman Hassan Eng.

Petroleum Engineering and Gas

The oil and gas industry continually seeks innovative methods to enhance hydrocarbon recovery due to the declining productivity of conventional techniques. Current recovery methods, such as water flooding and chemical flooding, often face limitations like high interfacial tension, unfavorable wettability, and reduced mobility of oil, especially under harsh reservoir conditions of high salinity. To address these challenges, this study explores the implementation of nanotechnology in enhanced oil recovery (EOR), focusing on the distinct and unique properties of nanoparticles. Nanoparticles, particularly SiO2, were chosen for their ability to significantly decrease interfacial tension, alter wettability, and improve oil mobility. SiO2 nanoparticles exhibit …

A Comparative Study On Natural Vs. Synthesized Polymers Combined With Silica Nanoparticles To Maximize Secondary Oil Recovery, Attia Attia, Mohamed Sadek Hamedi Al, Waleed Abd-Alsabour Ali Eng., Zeyad Tamer Elshony Eng.

Petroleum Engineering and Gas

Polymer flooding is a well-established technique for enhancing oil recovery from reservoirs. In this study, we investigate the performance of two different polymers, Xanthan Gum, and HPAM for secondary oil recovery in the sand pack. The effects of polymer concentration and high salinity on oil recovery are studied. The polymers are characterized using various measurements and tests, including viscosity, shear rate, and interfacial tension. The sand pack flooding experiments are conducted under various conditions, including varying polymer slugs, and nanosilica (silicon dioxide SiO2) concentration. The results are analyzed to determine the optimal conditions for polymer flooding for enhanced oil recovery. …

Novel Nanocomposite Of Carbonized Chitosan-Zinc Oxide-Magnetite For Adsorption Of Toxic Elements From Aqueous Solutions, Dalia A. Ali Eng, Ganna Gaber Ismail Eng.

Chemical Engineering

Herein, a novel nanocomposite (carbonized chitosan-zinc oxide-magnetite, CCZF) was developed to effectively remove toxic elements in water remediation. Combining the high adsorption capacities of chitosan with the magnetic properties of magnetite and the chemical stability of zinc oxide, the combination of these unique properties makes it an efficient and versatile material that offers a sustainable solution for water purification. The (CCZF) nanocomposite was synthesized through the coprecipitation method and characterized using various techniques, including scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET) analysis, X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and zeta potential analysis. The results showed …

Optimizing In-Situ Upgrading Of Heavy Crude Oil Via Catalytic Aquathermolysis Using A Novel Graphene Oxide-Copper Zinc Ferrite Nanocomposite As A Catalyst, Attia Attia, Ahmed Ashraf Soliman Eng., Mostafa Aboul-Fetouh Prof., Sayed Gomaa Prof., Tarek Aboul-Fotouh Prof.

Petroleum Engineering and Gas

Unconventional resources, such as heavy oil, are increasingly being explored and exploited due to the declining availability of conventional petroleum resources. Heavy crude oil poses challenges in production, transportation, and refining, due to its high viscosity, low API gravity, and elevated sulfur and metal content. Improving the quality of heavy oil can be achieved through the application of steam injection, which lowers the oil’s viscosity and enhances its flow. However, steam injection alone falls short of meeting the growing demand for higher-quality petroleum products. Catalytic upgrading is therefore being investigated as a viable solution to improve heavy oil quality. This …

Performance Of Ag‑Doped Cuo Nanoparticles For Photocatalytic Activity Applications: Synthesis, Characterization, And Antimicrobial Activity, Samar A. Salim, Ahmed Mosleh, Elbadawy A. Kamoun, Shahira H El-Moslamy, Heba Zahran, Samer Zyoud, Ibrahim Yahia

Nanotechnology Research Centre

The auto-combustion method synthesized CuO NPs and Ag/CuO NPs. The Ag/CuO NPs were analyzed using Fourier-transform infrared, X-ray difraction, scanning electron microscope, and Energy-dispersive X-ray spectroscopy instrumental analyses. The energy band gap, as determined by DRS properties, decreases from 3.82 to 3.50 eV for pure CuO and 10% Ag/CuO NPs, respectively. The photodegradation efciency of Rhodamine-B & Carmine by 10% Ag/CuO NPs was nearly 98.9 and 97.8%, respectively. Antimicrobial trials revealed that the antimicrobial efficacy of Ag/CuO NPs at several dosages (20, 40, 60, 80, 100, and 120 µg/mL) against human pathogens was initially assessed using the agar well-diffusion method, …

Efficient Phosphate Removal From Water Using Ductile Cast Iron Waste: A Response Surface Methodology Approach, Mai Hassan Dr., Nada Alkhashab Eng., Ahmed Osman Dr., Dalia A. Ali Eng

Chemical Engineering

Water scarcity is a critical issue worldwide. This study explores a novel method for addressing this issue by using ductile cast iron (DCI) solid waste as an adsorbent for phosphate ions, supporting the circular economy in water remediation. The solid waste was characterized using XRD, XRF, FTIR, and particle size distribution. Wastewater samples of different phosphate ion concentrations are prepared, and the solid waste is used as an adsorbent to adsorb phosphate ions using different adsorbent doses and process time. The removal percentage is attained through spectrophotometer analysis and experimental results are optimized to get the optimum conditions using Design …

Green Synthesis Of Carbonized Chitosan-Fe3o4-Sio2 Nano-Composite For Adsorption Of Heavy Metals From Aqueous Solutions, Dalia A. Ali Eng, Rinad Galal Ali Eng.

Chemical Engineering

Water pollution with heavy metals owing to industrial and agricultural activities have become a critical dilemma to humans, plants as well as the marine environment. Therefore, it is of great importance that the carcinogenic heavy metals present in wastewater to be eliminated through designing treatment technologies that can remove multiple pollutants. A novel green magnetic nano-composite called (Carbonized Chitosan-Fe3O4-SiO2) was synthesized using Co-precipitation method to adsorb a mixture of heavy metal ions included; cobalt (Co2+), nickel (Ni2+) and copper (Cu2+) ions from aqueous solutions. The novelty of this study was the synthesis of a new

nano-composite which was green with …

Exploring Co2-Eor Miscibility Flooding Potential For Horus Oil Field, Western Desert, Egypt: A Simulation-Based Investigation, Attia Attia, Adel Salem Prof., Rehab El-Maghraby, Mohamed Youssef Prof.

Petroleum Engineering and Gas

Carbon dioxide (CO2) miscible flooding is becoming increasingly vital in enhanced oil recovery (EOR) not only for residual oil extraction but also for holding a potential for environmental protection, given its association with global warming. This paper explores the impact of EOR using miscible continuous gas injection on enhancing the oil productivity of the aging Horus oil field in Egypt's Western Desert. Horus field faces declining production rates and a significant water cut, with only eight wells out of 24 wells actively producing. Currently, the field maintains a stabilized oil production plateau of 1050 barrels per day, accompanied by a …

New Models For Estimating Minimum Miscibility Pressure Of Pure And Impure Carbon Dioxide Using Artificial Intelligence Techniques, Attia Attia, Ahmed Ashraf Soliman Eng., John Shahat Eng., Sayed Gomaa Prof., Fares Ashraf El Salamony Prof.

Petroleum Engineering and Gas

CO2 miscible flooding stands out as one of the most-commonly employed and promising processes in enhanced oil recovery. The key factor for ensuring success in designing and executing CO2 injection projects lies in the precise determination of the Minimum Miscibility Pressure (MMP). Despite significant research endeavors in measuring and predicting the MMP through the use of empirical, analytical, numerical, and experimental approaches, the need for a comprehensive, accurate, efficient, and easy-to-use model remains. In response to this gap, our study developed various predictive models with 205 datasets, including well-established ones such as Artificial Neural Network (ANN), Random Forest (RF), and …

Photoexcited Charge Carrier Dynamics And Electronic Properties Of Two-Dimensional Mxene, Nb2ctx, Andrew M. Fitzgerald, Emily Sutherland, Tarek A. Elmelegy, Mary Qin Hassig, Julia Martin, Erika Colin-Ulloa, Ken Ngo, Ronald L. Grimm, Joshua R. Uzarski, Michel W. Barsoum, N. Aaron Deskins, Lyubov V. Titova, Kateryna Kushnir Friedman

Mechanical Engineering

Two-dimensional, 2D, niobium carbide MXene, Nb2CTx, has attracted attention due to its extraordinarily high photothermal conversion efficiency that has applications ranging from medicine, for tumor ablation, to solar energy conversion. Here, we characterize its electronic properties and investigate the ultrafast dynamics of its photoexcitations with a goal of shedding light onto the origins of its unique properties. Through density functional theory, DFT, calculations, we find that Nb2CTx is metallic, with a small but finite density of states at the Fermi level for all experimentally relevant terminations of Nb2CTx that can be achieved using HF or molten salt etching of the …

The Role Of Nanofluids In Renewable Energy Engineering, M. M. Bhatti, K. Vafai, Sara I. Abdelsalam

Basic Science Engineering

No abstract provided.

Augmented Formic Acid Electro-Oxidation At A Co-Electrodeposited Pd/Au Nanoparticle Catalyst, Yaser M. Asal, Ahmad M. Mohammad, Sayed S. Abd El Rehim, Islam M. Al-Akraa

Chemical Engineering

In this study, the formic acid electro-oxidation reaction (FAEOR) was catalyzed on a Pd-Au co-electrodeposited binary catalyst. The kinetics of FAEOR were intensively impacted by changing the Pd2+:Au3+ molar ratio in the deposition medium. The Pd1-Au1 catalyst (for which the Pd2+:Au3+ molar ratio was 1:1) acquired the highest activity with a peak current density for the direct FAEOR (Ip) of 4.14 mA cm−2 (ca. 13- times higher than that (ca. 0.33 mA cm−2) of the pristine Pd1-Au0 catalyst). It also retained the highest stability that was denoted in fulfilling ca. 0.292 mA cm−2 (ca. 19-times higher than 0.015 …

Synergistic Enhancement Of Formic Acid Electro-Oxidation On Ptxcuy Co-Electrodeposited Binary Catalysts, Yaser M. Asal, Ahmad M. Mohammad, Sayed S. Abd El Rehim, Islam M. Al-Akraa

Chemical Engineering

A propitious binary catalyst composed of Pt and Cu which were electrodeposited simultaneously onto a glassy carbon (GC) substrate was recommended for the formic acid (FA) electro-oxidation reaction (FAOR); the principal anodic reaction in the direct FA fuel cells (DFAFCs). The simultaneous co-electrodeposition of Pt and Cu in the catalyst provided an opportunity to tune the geometric functionality of the catalyst to resist the adsorption of poisoning CO at the Pt surface that represented the major impediment for DFAFCs marketing. The catalytic activity of the catalyst toward FAOR was significantly influenced by the (Pt4+/Cu2+) molar ratio of the electrolyte during …

Facile One-Step Hydrothermal Method For Nico2s4/Rgo Nanocomposite Synthesis For Efficient Hybrid Supercapacitor Electrodes, Ahmed Mysara, Sayed Y. Attia, Fouad I. El-Hosiny, M A. Sadek, Saad G. Mohamed, M M. Rashad

Nanotechnology Research Centre

Spinel nickel-cobalt sulfide (NiCo2S4) supported on reduced graphene oxide (rGO) was fabricated through a facile one-step hydrothermal method for energy storage applications. The distribution of the NiCo2S4 nanoparticles on the rGO surface was found to improve the supercapacitive performance of the assembled device. The NiCo2S4/rGO nanocomposite exhibits outstanding electrochemical behavior with a capacity (C)/specific capacitance (Cs) of 536 C g−1/1072 F g−1 at a current density of 1 A g−1. To further investigate the electrochemical behavior of the NiCo2S4/rGO nanocomposite, a hybrid supercapacitor (HSC) was constructed utilizing a NiCo2S4/rGO positive electrode and an activated carbon …

The Performance Response Of A Heat Pipe Evacuated Tube Solar Collector Using Mgo/Mwcnt Hybrid Nanofluid As A Working Fluid, Ahmed A. Abdel-Rehim, Shady Henein

Mechanical Engineering

Utilizing a hybrid nanofluid is a promising solution for enhancing the thermal performance of the solar collector in a sustainable manner. In the present work, the effect of using magnesium oxide/multi-walled carbon nanotubes (MgO/MWCNT) hybrid nanofluid on the thermal performance of the evacuated tube solar collector is experimentally investigated. Four different weight ratios of (80:20), (70:30), (60:40), and (50:50) are used for a hybrid of MgO with MWCNTs in a water base, respectively. The experiments are performed at a 0.02% particle concentration and at various volume flow rates ranging from 1 to 3 L/min. The results show an enhancement in …

Computational Framework Of Magnetized Mgo–Ni/Water-Based Stagnation Nanoflow Past An Elastic Stretching Surface: Application In Solar Energy Coatings, M, M. Bhatti, O. A. Bég, Sara Abdelsalam

Basic Science Engineering

In this article, motivated by novel nanofluid solar energy coating systems, a mathematical model of hybrid magnesium oxide (MgO) and nickel (Ni) nanofluid magnetohydrodynamic (MHD) stagnation point flow impinging on a porous elastic stretching surface in a porous medium is developed. The hybrid nanofluid is electrically conducted, and a magnetic Reynolds number is sufficiently large enough to invoke an induced magnetic field. A Darcy model is adopted for the isotropic, homogenous porous medium. The boundary conditions account for the impacts of the velocity slip and thermal slip. Heat generation (source)/absorption (sink) and also viscous dissipation effects are included. The mathematical …

Recent Advances In Preparation And Testing Methods Of Engine-Based Nanolubricants: A State-Of-The-Art Review, Sayed Akl, Sherif Elsoudy, Ahmed A. Abdel-Rehim, Serag Salem, Mark Ellis

Mechanical Engineering

Reducing power losses in engines is considered a key parameter of their efficiency improvement. Nanotechnology, as an interface technology, is considered one of the most promising strategies for this purpose. As a consumable liquid, researchers have studied nanolubricants through the last decade as potential engine oil. Nanolubricants were shown to cause a considerable reduction in the engine frictional and thermal losses, and fuel consumption as well. Despite that, numerous drawbacks regarding the quality of the processed nanolubricants were discerned. This includes the dispersion stability of these fluids and the lack of actual engine experiments. It has been shown that the …

Anisotropic Cuinse2 Nanocrystals: Synthesis, Optical Properties And Their Effect On Photoelectric Response Of Dye-Sensitized Solar Cell, Ahmed Mysara, M Mohsen Abdelaziz, A N. Emam, A S. Mansour, A A. F. Zikry, M .B Mohamed, Y H. Elbashar

Nanotechnology Research Centre

CuInSe₂ I-III-VI₂ ternary is a semiconductor considered very good efficient solar energy conversion material. An organometallic pyrolysis method is used to prepare monodisperse CuInSe₂ nanoparticles using a mixture of oleylamine, and trioctylphosphine, as capping materials. The particle shape changes to dot, rods or flowers occur via varying the reaction temperatures (160, 200, 220±C) respectively. The obtained particles have been characterized to determine the shape and size of CuInSe₂ nanoparticles using HR-TEM and XRD. The optical and electronic properties of these particles have been investigated and discussed in detail. Then the different shapes of CuInSe …

Optimization Of Nitrate Removal From Aqueous Solution By Acid-Activated Rice Straw Supported Nano Zero-Valent Iron Using Response Surface Methodology, Dalia A. Ali Eng, Nagwa Mahmoud Al-Mansi Prof, Mohamed Amin Sadek Prof., Ahmad Wafiq Abolnasr Dr.

Chemical Engineering

Rice straw is one of the most common agricultural wastes due to its large production amounts. Energy valorization of rice straw is a technology used for nitrate removal as the produced ashes used to generate the adsorbent by means of an alkali dissolution followed by acid precipitation. The novelty of the proposed process is that the production of the nano zero-valent iron supported acid-activated rice straw (AARS-nZVI) adsorbent is carried out without the energy valorization process but, through an acid activation for rice straw followed by precipitation of nZVI particles on its surface. The new adsorbent synthesis, characterization and application …

Energetic And Exergetic Analysis Of A Heat Pipe Evacuated Tube Solar Collector Using Mwcnt/Water Nanofluid, Mahmoud Eltaweel, Ahmed A. Abdel-Rehim

Mechanical Engineering

Increasing the energy demand and the limited availability of conventional energy sources are the main challenges to secure the human future. Solar energy is an attractive source of energy to ensure the sustainability of energy in this world for now and for the future. Evacuated tube solar collector is a solar thermal collector mostly used for domestic applications. The replacement of the working fluid with nanofluid can enhance the heat transfer even for low temperature applications. The effect of multi-walled carbon nanotubes and water nanofluid as working fluid in evacuated tube solar collector is used to experimentally investigate the energy …

Energy And Exergy Analysis Of A Thermosiphon And Forced-Circulation Flat-Plate Solar Collector Using Mwcnt/Water Nanofluid, Mahmoud Eltaweel, Ahmed A. Abdel-Rehim

Mechanical Engineering

The scientific community has focused on the use of nanofluids to enhance solar collectors' thermal efficiency. Solar energy is considered an extensively available energy resource with a weak effect on the environment. The flat-plate solar collector is considered to be the most common collector used, but the efficiency of the collector has limitations, such as the low effectiveness of the absorber in terms of energy absorption and the transmission of that energy to the working fluid. The flat-plate solar collector can be enhanced by replacing the working fluid with a nanofluid. Nanofluids are considered new media that exhibit thermophysical properties …