Nanoscience and Nanotechnology Commons^™

Predicting Rheology Of Uv-Curable Nanoparticle Ink Components And Compositions For Inkjet Additive Manufacturing, Cameron D. Lutz

Master's Theses

Inkjet additive manufacturing is the next step toward ubiquitous manufacturing by enabling multi-material printing that can exhibit various mechanical, electronic, and thermal properties. These characteristics are realized in the careful formulation of the inks and their functional materials, but there are many constraints that need to be satisfied to allow optimal jetting performance and build quality when used in an inkjet 3-D printer. Previous research has addressed the desirable rheology characteristics to enable stable drop formation and how the metallic nanoparticles affect the viscosity of inks. The contending goals of increasing nanoparticle-loading to improve material deposition rates while trying to …

Development Of Super Hydrophobic Membranes And Their Applications, Sumona Paul

Dissertations

Effective liquid phase separation is vital across industries, especially in aviation, chemicals, fuels, and textiles. Membrane technology offers advantages over traditional methods like distillation, with low energy consumption and protection for heat-sensitive molecules. Membrane performance is assessed based on factors such as materials, surface modification, and interactions. This research targets superhydrophobic membranes for liquid-liquid filtration and antiwetting omniphobic membranes for membrane distillation, focusing on properties like contact angle and thermal resistance.

This study presents a highly hydrophobic membrane achieved by immobilizing carbon nanotubes (CNTs) onto a PTFE microfiltration membrane. It's designed for dewatering organic-water mixtures with trace water content via …

Targeted Drug Delivery: Investigating Protein Corona Behavior, Atharva Markale

Theses

Due to high specificity and less toxicity, nanoparticles have become promising for targeted drug delivery against cancer, although they face challenges when they enter the bloodstream, making their behavior unpredictable. The deposition of proteins on nanoparticles, the protein corona, changes their biosignature, affecting their circulation, drug release potency, targeting ability, and immunogenicity. The continuous exchange of protein layers on a nanoscale is complex to analyze.

Nanoparticle tracking analysis (NTA) is a method to characterize nanoparticles in blood plasma by combining principles of light scattering microscopy and Brownian motion. In this work, time-dependent experiments with plasma were conducted to analyze the …

Recent Advance In Electrochemical Dehalogenative Deuteration, Peng-Fei Li, Guang-Sheng Kou, Li-Ping Qi, You-Ai Qiu

Journal of Electrochemistry

In recent years, the incorporation of deuterium atoms into organic compounds has emerged as a vital focus in the development of pharmaceutical molecules. This trend is driven by the increasing recognition of the significance of compounds containing deuterium atoms across various domains, including materials and biopharmaceuticals, where they have found widespread applications in mechanistic studies within the realms of chemistry and biology. Meanwhile, organic electrochemistry, as a relatively environmentally friendly catalytic mode with broad adaptability to redox reactions, has emerged as a crucial alternative to traditional halogen-deuterium exchange in the context of the reduction deuteration of halides. This approach circumvents …

Comparison Of Ligands In Palladium-Catalyzed Electrochemical Allyl 4-Pyridinylation, Wei-Jie Ding, Chun-Hui Yang, Zhong-Tao Feng, Shi-Rong Lu, Xu Cheng

Journal of Electrochemistry

4-CN-pyridine is a widely applied 4-pyridinylation reagent for diverse transformations. Conventionally, the reaction proceeds via an open-shell radical cross-coupling pathway. Following our previous study, in this work, we report the Pd-catalyzed allyl 4-pyrinylation reaction under electrochemical conditions. The reaction proceeds via radical-polar crossover pathway in which the role of phosphine ligand in reactivity and selectivity was extensively investigated.

Nickel-Catalyzed Α-Arylation Of Α-Cyanoacetates Enabled By Electrochemistry, Zi-Meng Li, Zhang-Jian Li, Anat Milo, Ping Fang, Tian-Sheng Mei

Journal of Electrochemistry

β-Amino acids have a wide range of applications in the field of pharmaceuticals. Utilizing a combination strategy of nickel catalysis and paired electrolysis, a catalytic α-arylation protocol of carbonyl compounds has been developed. This protocol affords various a-aryl-a-cyanoacetates, which can be reduced to high-value-added α-aryl-β-amino acids. The cross-coupling reaction of electron-deficient aryl bromides with a-cyanoacetates achieves the expected products with good yields and functional group compatibility under mild conditions. Excessive electron-richness in initial aryl bromides facilitates the self-coupling of desired products. DFT calculations confirm that the presence of electron-rich aryl substitutions decreases the reduction potentials of the product anions, making …

Phase Interface Dynamics And Heat Transfer Mechanisms In Evaporating Droplet And Pool Boiling Processes, Md Tanbin Hasan Mondal

Doctoral Dissertations

Despite the significant importance and widespread use of phase-change cooling techniques, there are still fundamental questions about the microscopic processes that govern the heat transfer mechanisms. In order to gain a better understanding of the underlying physics involved, it is essential to have information at the microscale regarding the surface temperature distribution with time as well as the location and speed of the moving contact line (MCL). A comprehensive understanding of heat transfer mechanisms and phase-interface behavior during phase-change cooling is crucial for improving heat transfer models, optimizing surface engineering, and maximizing overall effectiveness. Firstly, this dissertation presents a capacitance-based …

A Rechargeable Metal-Co2 Battery Using Lower-Cost Materials, Chris Fetrow

Nanoscience and Microsystems ETDs

High energy density, low-cost chemical conversion batteries are widely studied for their potential application to applications in which current battery technologies are unsuitable replacements for fossil fuel-powered systems. The demonstration of rechargeable chemical conversion batteries, and particularly batteries without the fatal flaw of high overpotential due to the difficulties inherent to chemical conversion reactions, is of great interest to further both this aim. In this work, a secondary Al-CO2 battery was demonstrated using a homogeneous aluminum iodide redox mediator to enable the battery’s discharge and charge at a high energy density and a low overpotential of 0.05 Volts. The operation …

A Multi-Material Platform For Imaging Of Single Cell-Cell Junctions Under Tensile Load Fabricated With Two-Photon Polymerization, Jordan Rosenbohm, Grayson Minnick, Bahareh Tajvidi Safa, Amir M. Esfahani, Xiaowei Jin, Haiwei Zhai, Nickolay V. Lavrik, Ruiguo Yang

Department of Mechanical and Materials Engineering: Faculty Publications

We previously reported a single-cell adhesion micro tensile tester (SCAμTT) fabricated from IP-S photoresin with two-photon polymerization (TPP) for investigating the mechanics of a single cell-cell junction under defined tensile loading. A major limitation of the platform is the autofluorescence of IP-S, the photoresin for TPP fabrication, which significantly increases background signal and makes fluorescent imaging of stretched cells difficult. In this study, we report the design and fabrication of a new SCAμTT platform that mitigates autofluorescence and demonstrate its capability in imaging a single cell pair as its mutual junction is stretched. By employing a two-material design using IP-S …

Nanozyme: Combining Power Of Natural Enzymes And Artificial Catalysis, Peng Du, Lizeng Gao, Jian Jiao, Kelong Fan, Xiyun Yan

Bulletin of Chinese Academy of Sciences (Chinese Version)

Nanozymes represent a novel class of artificial enzymes and biocatalysts, possessing both the physical and chemical properties of nanomaterials along with unique enzyme-like catalytic activities, which breaks the boundary between inorganic materials and organic life. Unlike natural enzymes, traditional enzyme mimics and chemical catalysts, nanozymes exhibit catalytic activity that can be regulated by their nanoscale physical and chemical properties. They are characterized by good stability, high- and lowtemperature resistance, acid and alkali resistance, adjustable activity, and multifunctionality. As a result, nanozymes have garnered widespread attention in the fields of biomedicine, environment treatment, green agriculture, new energy resources, and have begun …

Plasma Ion Source, Nathan K. Davis

Student Research Symposium

It is well known that a plasma can be created with both high input power and ultra low pressure. The challenge is in creating these same plasma characteristics with both lower power while maintaining a higher pressure. We have developed an ion beam by careful manipulation of magnetic and electric fields. Magnetic fields are used to accelerate ambient electrons to ionize the low pressure gas into a plasma. Electric fields are used to extract the ions into a focused beam. To achieve these initial ionizations, an artificial vacuum is created to reach low enough pressures to ionize the gas. A …

Fabrication Of Two-Dimensional Material-Based Nano-Capacitors Using Bismuth Selenite (Bi2seo5) To Study Its Dielectric Properties, Major Kc

McKelvey School of Engineering Graduate Student Theses & Dissertations

In recent years, the demand for high-performance micro and nanodevices has surged, necessitating the exploration of novel dielectric materials to replace conventional silicon dioxide. Following the continuation of the Moorse law, as device dimensions reduce to nanoscale levels, the properties of silicon dioxide can degrade, leading to issues such as increased leakage current and reduced gate control. Materials with superior electrical properties, such as higher dielectric constant, lower leakage current, and better thermal stability allowing for the development of faster, more efficient, and more reliable devices are in higher demand than ever. Two-dimensional layered semiconductor nanomaterials represented by compounds such …

Crystalline Colloidal Arrays: Exploring Light-Matter Interactions, Haley W. Jones

All Dissertations

Understanding and manipulating quantum light-matter interactions, especially in the context of nanostructured environments, is highly critical for technological progress and inventive solutions in the fields of telecommunications, energy-efficient lighting, and cutting-edge quantum computing technologies. The fundamental interactions of photons with a surrounding environment directly impact the performance and efficiency of devices such as lasers, light-emitting diodes (LEDs), and quantum computing elements, which leverage the unique properties of confined structured environments. Since the late 1980s, the connection between a structured environment and the decay kinetics of an embedded fluorophore has been a highly debated and unresolved topic in the literature. More …

Electrokinetic Particle Trapping Performance Of Conductive Nanofiber Mats In Microfluidic Wells., Jacob Hunter West

Electronic Theses and Dissertations

The frequency dependence of electrokinetic particle trapping using large-area (>mm²) conductive carbon nanofiber (CNF) mat electrodes is investigated. The fibers provide nanoscale geometric features for the generation of high electric field gradients, which is necessary for particle trapping via dielectrophoresis (DEP). A device was fabricated with an array of microfluidic wells for repeated experiments; each well included a CNF mat electrode opposing an aluminum electrode. Fluorescent microspheres (1 µm) were trapped at various electric field frequencies between 30 kHz – 1 MHz. Digital images of each well were analyzed to quantify particle trapping. DEP trapping by the …

Encapsulated 2d Materials And The Potential For 1d Electrical Contacts, Sarah Wittenburg

Physics Undergraduate Honors Theses

The utilization of two-dimensional materials and heterostructures, particularly graphene and hexagonal boron nitride, have garnered significant attention in the realm of nanoelectronics due to their unique properties and versatile functionalities. This study focuses on the synthesis and fabrication processes of monolayer graphene encapsulated between layers of hBN, aiming to explore the potential of these heterostructures for various electronic applications. The encapsulation of graphene within hBN layers not only enhances device performance but also shields graphene from environmental contaminants, ensuring long-term stability. Experimental techniques, including mechanical exfoliation and stamp-assisted transfer, are employed to construct three-layer stacks comprising hBN-graphene-hBN. The fabrication process …

Optimization And Fabrication Of Semiconductor Power Devices On 4h-Sic, Justin M. Lynch

Legacy Theses & Dissertations (2009 - 2024)

The work presented in this document focuses on the design, optimization, and fabrication of power devices on 4H-Silicon Carbide (SiC) substrates. Power devices convert or control electric power flow and are the main components of electronic power systems worldwide. Power electronic systems are used in both low-power and high power settings, including prevalent applications such as fast charging set-ups for personal electronic devices, electric vehicle motor drives, and renewable energy storage and grid connections. With a wide spread of applications and the further electrification of our society on the horizon, it is crucial to minimize the power loss of power …

Toward The Advancement Of High-Efficiency P-Type Doping In Iii-Nitrides: Novel Beryllium Doping Techniques, Benjamin Arthur Mcewen

Legacy Theses & Dissertations (2009 - 2024)

The III-nitride material system is well-suited to a broad range of applications in light emitting diodes and laser diodes, photodetectors, power management, and telecommunications. Much of III-nitrides’ utility derives from their direct, wide, and tunable bandgap, but it is their ability to be doped n- and p-type that makes them especially useful and attractive. However, despite the decades of academic interest and commercial success, p-type doping in III-nitrides is infamously difficult and inefficient. Magnesium, the only currently viable p-type dopant in III-nitrides, is not a shallow acceptor, and as a result, the activation efficiency of Mg in GaN is only …

Design And Fabrication Of Injectable Alginate Hydrogel Microstrands For Mesenchymal Stem Cell Delivery In Salivary Gland Tissue Regeneration, Sujith Chander Reddy Kollampally

Legacy Theses & Dissertations (2009 - 2024)

Fibrosis is a pathological wound healing process, driven by excessive accumulation of extracellular matrix (ECM) following tissue remodeling. Fibrosis occurs in diseased or damaged salivary glands caused by several conditions, such as Sjogren’s syndrome or radiation for head and neck cancers. Having better insight into the cellular and molecular progression of fibrosis will allow us to model new therapeutic approaches as fibrosis prevents salivary gland tissue regeneration and function. Pharmacological, tissue engineering and cell-based regeneration strategies have been widely explored to restore lost salivary gland function. Among cell-based therapies, exploitation of mesenchymal stromal/stem cells (MSC) for salivary gland regeneration has …

Biophysical Model Of Retraction Motor Neurons And Their Modification By Operant Conditioning, Maria Rasheed

Dissertations and Theses (Open Access)

Operant conditioning (OC) is a form of associative learning in which an animal modifies its behavior based on the consequences that follow that behavior. Despite its ubiquity, the underlying mechanisms of OC are poorly understood. Insights into the mechanisms of OC can be obtained by studying Aplysia feeding behavior as it can be modified by OC. This behavior is mediated by a central pattern generator (CPG) network in the buccal ganglia that contains a relatively small number of neurons. This CPG generates rhythmic motor patterns (BMPs) that move food into the gut by closing a tongue-like structure (i.e., radula) during …

Electrochemical Syntheses Of Aryl-Substituted Benzothiophenes And Phenanthrenes Using Benzenediazonium Salts As The Aryl Radical Precursors, Li-Yuan Lan, Yang-Ye Jiang, Raymond Daniel Little, Cheng-Chu Zeng

Journal of Electrochemistry

Aryl-substituted benzothiophene and phenanthrene are important structural units in medicinal chemistry and materials science. Although extensive effort has been devoted to prepare these compounds and a variety of approaches have been developed to construct the 2-substituted benzothiophene core structure, environmental-friendly and efficient synthetic means are still desired. Based on our previous electrochemical Minisci-type arylation reaction with aryl diazonium salt as the aryl precursor, as well as the work from König’s group, herein, we described the use of paired electrolysis to achieve 2-aryl benzothiophenes and 9-aryl phenanthrenes employing benzenediazonium salts as the aryl radical precursors. Initially, 2-methylthiobenzendiazonium salt 1a and 4-methylbenzene …

Electrochemical Advanced Treatment Of Desulfurization Wastewater From Coal-Fired Power Plants, Ju-Cai Wei, Juan Yi, Xu Wu

Journal of Electrochemistry

Zero-emission of desulfurization wastewater is one of the main demands for coal-fired power plants. As typical high salinity wastewater, it is hard to purify the desulfurization wastewater from coal-fired power plants through traditional physicochemical treatment or biochemical treatment, e.g., COD and Cl^–. A high concentration of Cl^– ion in desulfurization wastewater restricts wastewater reuse and zero-emission. Electrochemical technology is an attractive method for high salinity wastewater zero-emission, which provides a versatile, efficient, cost-effective, easily automatable, and clean industrial process. For advanced treatment of effluent after triple box process treatment in power plants, this paper reports an electrochemical …

Electrocatalytic Cyclopropanation Of Active Methylene Compounds, Liang-Hua Jie, Hai-Chao Xu

Journal of Electrochemistry

The development of novel strategies to access cyclopropanes has become increasingly important due to the vital role of these three-membered ring structures in synthetic intermediates, natural products, and pharmaceuticals. Herein, we present an electrocatalytic method for the synthesis of cyclopropanes through intermolecular dehydrogenative annulation of active methylene compounds and arylalkenes. This electrochemical process requires no chemical oxidants, allowing for a speedy access to various functionalized cyclopropanes from inexpensive and readily available materials.

Gate-Controlled Supercurrent Effect In Dry-Etched Dayem Bridges Of Non-Centrosymmetric Niobium Rhenium, Jennifer Koch, Carla Cirillo, Sebastiano Battisti, Leon Ruf, Zahra Makhdoumi Kakhaki, Alessandro Paghi, Armen Gulian, Serafim Teknowijoyo, Giorgio De Simoni, Francesco Giazotto, Carmine Attanasio, Elke Scheer, Angelo Di Bernardo

Mathematics, Physics, and Computer Science Faculty Articles and Research

The application of a gate voltage to control the superconducting current flowing through a nanoscale superconducting constriction, named as gate-controlled supercurrent (GCS), has raised great interest for fundamental and technological reasons. To gain a deeper understanding of this effect and develop superconducting technologies based on it, the material and physical parameters crucial for the GCS effect must be identified. Top-down fabrication protocols should also be optimized to increase device scalability, although studies suggest that top-down fabricated devices are more resilient to show a GCS. Here, we investigate gated superconducting nanobridges made with a top-down fabrication process from thin films of …

Injectable And Rapidly Expandable Thrombin-Decorated Cryogels Achieve Rapid Hemostasis And High Survival Rates In A Swine Model Of Lethal Junctional Hemorrhage, Syed Muntazir Andrabi, S.M. Shatil Shahriar, Al-Murtadha Al-Gahmi, Benjamin L. Wilczewski, Mark A. Carlson, Jingwei Xie

Department of Mechanical and Materials Engineering: Faculty Publications

Effective therapies are urgently needed to stabilize patients with marginally compressible junctional hemorrhage long enough to get them to the hospital alive. Herein, we report injectable and rapidly expandable cryogels consisting of polyacrylamide and thrombin (AT cryogels) created by cryo-polymerization for the efficient management of lethal junctional hemorrhage in swine. The produced cryogels have small pore sizes and highly interconnected porous architecture with robust mechanical strength. The cryogels exhibit rapid shape memory properties and prove to be resilient against fatigue. These cryogels also show high water/blood absorption capacity, fast blood clotting effect, and enhanced adhesion of red blood cells and …

Development Of Novel Analytical Methods For The Investigation Of Mammalian Tissues And Cells, Grace A. Binder

USF Tampa Graduate Theses and Dissertations

This dissertation endeavors to advance the frontiers of analytical chemistry by addressing critical challenges across three distinct chapters. In the first chapter, the focus is on the evaluation of digestion methods for the analysis of trace metals in mammalian tissues and the Standard Reference Material NIST 1577c. The primary goal is to optimize methodologies, laying the groundwork for reliable trace metal analysis and furthering our understanding of their roles in biological systems.

Transitioning into the realm of immunomodulation, the second chapter elucidates immune response, disease and treatment through the optimization and discovery of STING modulators, utilizing the luciferase assay for …

Recent Advances In Solar Photo(Electro)Catalytic Nitrogen Fixation, Jun-Bo Ma, Sheng Lin, Zhiqun Lin, Lan Sun, Chang-Jian Lin

Journal of Electrochemistry

Ammonia (NH₃) is an essential chemical in modern society. It is currently produced in industry by the Haber-Bosch process using H₂ and N₂ as reactants in the presence of iron-based catalysts at high-temperature (400–600 ^oC) and extremely highpressure (20–40 MPa) conditions. However, its efficiency is limited to 10% to 15%. At the same time, a large amount of energy is consumed, and CO₂ emission is inevitably. The development of a sustainable, clean, and environmentally friendly energy system represents a key strategy to address energy crisis and environmental pollution, ultimately aiming to achieve carbon neutrality. …

Electrospun Nanofiber Technology Based Energy Storage And Biosensor Devices For Wearable Electronics, Bianca Seufert

USF Tampa Graduate Theses and Dissertations

As progress in the field of nanotechnology continues to evolve, it is becoming more and more prevalent to apply this small but powerful technology to portable wearable electronics. The unique scale of such a technology lends its expertise to the investigation of enzymes for biometric related diagnostics or in the development of light weight flexible energy storage devices. Furthermore, as the need for highly precise and durable wearable electronics grows, the next generation of electronics must keep pace with this development in terms of shape, flexibility, functionality, and performance.

The presented research reviews the current state of art of nanofiber …

The Determination Of Pzc And Differential Capacitance Curve Of Platinum-Alkaline Polymer Electrolyte Interfaces, Chen-Xi Liu, Ze-Ping Zou, Mei-Xue Hu, Yu Ding, Yu Gu, Shuai Liu, Wen-Jing Nan, Yi-Chang Ma, Zhao-Bin Chen, Dong-Ping Zhan, Qiu-Gen Zhang, Lin Zhuang, Jia-Wei Yan, Bing-Wei Mao

Journal of Electrochemistry

Alkaline polymer electrolyte (APE) is the core component of modern alkaline hydrogen and oxygen fuel cells, and its single ion conductor nature makes the "electrode/APE" interfaces different from the conventional "electrode/solution" interfaces in terms of ion distribution, electrical double layer structure and polarization behavior. Due to the complexity of the APE and the associated solid-solid interfaces, fundamental investigations are challenging and deeper understanding of the structures and properties of such interfaces is in the infant stage. In this work, we aim to investigate the double layer structure from the aspects of differential capacitance curve and potential of zero charge (PZC) …

Micropatterning And Functionalization Of Single Layer Graphene: Tuning Its Electron Transport Properties, Miao-Miao Cui, Lian-Huan Han, Lan-Ping Zeng, Jia-Yao Guo, Wei-Ying Song, Chuan Liu, Yuan-Fei Wu, Shi-Yi Luo, Yun-Hua Liu, Dong-Ping Zhan

Journal of Electrochemistry

As a promising 2D material, graphene exhibits excellent physical properties including single-atom-scale thickness and remarkably high charge carrier mobility. However, its semi-metallic nature with a zero bandgap poses challenges for its application in high-performance field-effect transistors (FETs). In order to overcome these limitations, various approaches have been explored to modulate graphene's bandgap, including nanoscale confinement, external field induction, doping, and chemical micropatterning. Nevertheless, the stability and controllability still need to be improved. In this study, we propose a feasible method that combines electrochemical bromination and photolithography to precisely tune the electron transport properties of single layer graphene (SLG). Through this …

Oral Administration Of Ph-Responsive Polymeric Nanoparticles Based On Zein And Their Therapeutic Potential On Cancer., Bruno Alejandro Valades-Aguilar, José Raúl Rangel-López, Jennifer Citlally Leos-Rivera, Moisés Armides Franco-Molina, María Cristina Rodríguez-Padilla, Diana Ginette Zárate-Triviño

Research Symposium

Background: Zein is a water-insoluble protein extracted from the endosperm of corn seeds, this polymer is an attractive matrix to encapsulate hydrophilic compounds because of its high proportion of hydrophobic amino acids, making it a potential smart delivery material for several treatments in the biopharmaceutical industry. nanoparticles have been used as drug delivery systems for the improvement of oral bioavailability; however, the strategies of nanoparticle obtention need the addition of stabilizers. in this study, a modified method to obtain zein nanoparticles was developed.

Methods: Zein nanoparticles (ZNps) were made by a thermal treatment and precipitated into ovalbumin at a ratio …