Open Access. Powered by Scholars. Published by Universities.®

Manufacturing Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 2041 - 2070 of 2386

Full-Text Articles in Manufacturing

Modeling And Simulation Of A Laser Deposition Process, Frank W. Liou, Zhiqiang Fan, Heng Pan, Kevin P. Slattery, Mary Kinsella, Joseph William Newkirk, Hsin-Nan Chou Aug 2007

Modeling And Simulation Of A Laser Deposition Process, Frank W. Liou, Zhiqiang Fan, Heng Pan, Kevin P. Slattery, Mary Kinsella, Joseph William Newkirk, Hsin-Nan Chou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A laser deposition process involves the supply of metallic powders into a laser-heated spot where the powder is melted and forms a melt puddle which quickly solidifies into a bead. In order to design an effective system, the laser beam, the powder beam, and their interactions need to be fully understood. In this paper, the laser-material interaction within the melt pool is reported using a multi-scale model: A macroscopic model to model mass, heat, and momentum transfer. Experiments were also conducted to validate the simulation model.

Go to article

Variable Powder Flow Rate Control In Laser Metal Deposition Processes, Lie Tang, Jianzhong Ruan, Robert G. Landers, Frank W. Liou Aug 2007

Variable Powder Flow Rate Control In Laser Metal Deposition Processes, Lie Tang, Jianzhong Ruan, Robert G. Landers, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper proposes a novel technique, called Variable Powder Flow Rate Control (VPFRC), for the regulation of powder flow rate in laser metal deposition processes. The idea of VPFRC is to adjust the powder flow rate to maintain a uniform powder deposition per unit length even when disturbances occur (e.g., the motion system accelerates and decelerates). Dynamic models of the powder delivery system motor and the powder transport system (i.e., five-meter pipe, powder dispenser, and cladding head) are first constructed. A general tracking controller is then designed to track variable powder flow rate references. Since the powder flow rate at …

Go to article

Aqueous-Based Extrusion Fabrication Of Ceramics On Demand, Michael S. Mason, Tieshu Huang, Robert G. Landers, Ming-Chuan Leu, Greg Hilmas, Michael W. Hayes Aug 2007

Aqueous-Based Extrusion Fabrication Of Ceramics On Demand, Michael S. Mason, Tieshu Huang, Robert G. Landers, Ming-Chuan Leu, Greg Hilmas, Michael W. Hayes

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Aqueous-Based Extrusion Fabrication is an additive manufacturing technique that extrudes ceramic slurries of high solids loading layer by layer for part fabrication. The material reservoir in a previously developed system has been modified to allow for starting and stopping of extrusion process on demand. Design pros and cons are examined and a comparison between two material reservoir designs is made. Tests were conducted to determine the optimal deposition parameters for starting and stopping of the extrudate on demand. The collected test data is used to create a process model that describes the relationship between ram velocity and material extrusion rate. …

Go to article

Numerical Simulation Of The Evolution Of Solidification Microstructure In Laser Deposition, Zhiqiang Fan, Todd E. Sparks, Frank W. Liou, Anand Jambunathan, Yaxin Bao, Jianzhong Ruan, Joseph William Newkirk Aug 2007

Numerical Simulation Of The Evolution Of Solidification Microstructure In Laser Deposition, Zhiqiang Fan, Todd E. Sparks, Frank W. Liou, Anand Jambunathan, Yaxin Bao, Jianzhong Ruan, Joseph William Newkirk

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A predictive model is developed to simulate the evolution of the solidification microstructure during the laser deposition process. The microstructure model is coupled with a comprehensive macroscopic thermodynamic model. This model simulates dendritic grain structures and morphological evolution in solidification. Based on the cellular automata approach, this microstructure model takes into account the heterogeneous nucleation both within the melt pool and at the substrate/melt interface, the growth kinetics, and preferential growth directions of dendrites. Both diffusion and convection effects are included. This model enables prediction and visualization of grain structures during and after the deposition process. This model is applied …

Go to article

Experimental Investigation Of Effect Of Environment Temperature On Freeze-Form Extrusion Fabrication, Xiyue Zhao, Michael S. Mason, Tieshu Huang, Ming-Chuan Leu, Robert G. Landers, Greg Hilmas, Samuel J. Easley, Michael W. Hayes Aug 2007

Experimental Investigation Of Effect Of Environment Temperature On Freeze-Form Extrusion Fabrication, Xiyue Zhao, Michael S. Mason, Tieshu Huang, Ming-Chuan Leu, Robert G. Landers, Greg Hilmas, Samuel J. Easley, Michael W. Hayes

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Freeze-form Extrusion Fabrication (FEF) is an additive manufacturing technique that extrudes ceramic loaded aqueous pastes layer by layer below the paste freezing temperature for component fabrication. A computer controlled 3-D gantry system has been developed for the FEF process. The system includes a temperature control subsystem that allows for fabrication of components below the paste freezing temperature. The low temperature environment allows for larger component fabrication. Comparisons in terms of layer thickness, self-sustaining ability, and system response were performed between 0⁰C and -20⁰C for alumina sample fabrications. The minimum deposition angles without use of support material have been determined for …

Go to article

Comparing The Feasibility Of Cutting Thin-Walled Sections From Five Commonly Used Metals Utilizing Wire Electric Discharge Machining, Richard C. Stephenson Jul 2007

Comparing The Feasibility Of Cutting Thin-Walled Sections From Five Commonly Used Metals Utilizing Wire Electric Discharge Machining, Richard C. Stephenson

Theses and Dissertations

Wire Electric Discharge Machining (wire-EDM) is a non-traditional machining process. Controlled electric sparks are successively used to vaporize part of a workpiece along a programmed path in order to machine a desired part. Because there is no tool that comes in direct contact with the workpiece, it is possible to machine thin, delicate parts. This thesis was designed to observe and analyze the differences in cutting capabilities for a conventional wire-EDM machine when cutting thin-walled sections from five commonly used metals utilizing a variation of roughing and finishing passes. The five metals that were used in this study are: Aluminum …

Go to article

Friction Stir Welding Of High-Strength Automotive Steel, Eric Michael Olsen Jul 2007

Friction Stir Welding Of High-Strength Automotive Steel, Eric Michael Olsen

Theses and Dissertations

The following thesis is a study on the ability to create acceptable welds in thin-plate, ultra-high-strength steels (UHSS) by way of friction stir welding (FSW). Steels are welded together to create tailor-welded blanks (TWB) for use in the automotive industry. Dual Phase (DP) 590, 780, and 980 steel as well as Transformation-Induced Plasticity (TRIP) 590 steel with thicknesses ranging from 1.2 mm to 1.8 mm were welded using friction stir welding under a variety of processing conditions, including experiments with dissimilar thicknesses. Samples were tested under tensile loads for initial determination if an acceptable weld had been created. Acceptable welds …

Go to article

Fabrication Of Net-Shape Functionally Graded Composites By Electrophoretic Deposition And Sintering: Modeling And Experimentation, E.A. Olevsky, X. Wang, A. Maximenko, M.A. Meyers Jun 2007

Fabrication Of Net-Shape Functionally Graded Composites By Electrophoretic Deposition And Sintering: Modeling And Experimentation, E.A. Olevsky, X. Wang, A. Maximenko, M.A. Meyers

Industrial and Manufacturing Engineering

It is shown that electrophoretic deposition (EPD) sintering is a technological sequence that is capable of producing net-shape bulk functionally graded materials (FGM). By controlling the shape of the deposition electrode, components of complex shapes can be obtained. To enable sintering net-shape capabilities, a novel optimization algorithm and procedure for the fabrication of net-shape functionally graded composites by EPD and sintering has been developed. The initial shape of the green specimen produced by EPD is designed in such a way that the required final shape is achieved after sintering-imposed distortions. The optimization is based on a special innovative iteration procedure …

Go to article

Investigation Of The Lead-Free Solder Joint Shear Performance, James Webster, Jianbiao Pan, Brian J. Toleno Apr 2007

Investigation Of The Lead-Free Solder Joint Shear Performance, James Webster, Jianbiao Pan, Brian J. Toleno

Industrial and Manufacturing Engineering

Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The purpose of this study is to investigate the effects of reflow profile and thermal shock on the shear performance of eutectic SnPb (SnPb) and Sn3.0Ag0.5Cu (SAC305) solder joints. Test boards were assembled with four different sized surface mount chip resistors (1206, 0805, 0603 and 0402). Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb were developed with three levels of peak temperature (12ºC, 22ºC, and 32ºC above solder liquidus temperature, or 230ºC, 240ºC, and 250ºC for SAC …

Go to article

Objective Test Methods For Waveguide Audio Synthesis, Steven Gregory Wood Mar 2007

Objective Test Methods For Waveguide Audio Synthesis, Steven Gregory Wood

Theses and Dissertations

Acoustic Physical Modeling has emerged as a newer musical synthesis technique. The most common form of physical modeling synthesis in both industry and academia is digital waveguide synthesis. Commercially available for the past thirteen years, the top synthesizer manufacturers have chosen to include physical modeling synthesis in their top of the line models. In the area of audio quality testing, the most common tests have traditionally been group listening tests. While these tests are subjective and can be expensive and time-consuming, the results are validated by the groups' proper quality standards. Research has been conducted to evaluate objective testing procedures …

Go to article

An Evaluation Of American Companies That Outsource Manufacturing To China: Decision-Making And Performance, Michael Kenyon Favreau Mar 2007

An Evaluation Of American Companies That Outsource Manufacturing To China: Decision-Making And Performance, Michael Kenyon Favreau

Theses and Dissertations

The topic of outsourcing ranks at the top of business issues for a wide variety of companies (Wery, 2004; Ezrati, 2004). The majority of American companies believe that offshore-related matters rank as the most strategic decisions that management is expected to make in the next 12 months (Wery, 2004). “Outsourcing in China can help many companies save money, but it can be very frustrating if not done right" (Ting, 2004). The perceived benefits of outsourcing production to China are tremendously enticing, but a lack of understanding of the total costs involved lures many companies into outsourcing when it is not …

Go to article

Lifetime Testing Of Wire-Grid Polarizers With Selected Over-Coatings, Steven J. Malone Mar 2007

Lifetime Testing Of Wire-Grid Polarizers With Selected Over-Coatings, Steven J. Malone

Theses and Dissertations

Wire-grid polarizers (WGPs) offer superior extinction, durability, angle of incidence, and heat resistance when compared to traditional organic polarizers. WGPs are found in applications such as high lumen lighting, laser devices, high lumen digital cinema projectors, LED packaging, and other integrated optical applications and are driving the need for over-coatings. Over-coating a WGP has been found to increase lifetime and durability. This research provides lifetime data on coated and uncoated WGPs. WGPs over-coated with 100nm of SiO2, 300nm of MgF2, and with no over-coating were heated to temperatures of 450 ºC, 500 ºC, and 550 ºC and timed until they …

Go to article

A Qualitative Study Of Selected Quality Knowledge And Practices In Guangdong Province, China, Tyler R. Thomas Mar 2007

A Qualitative Study Of Selected Quality Knowledge And Practices In Guangdong Province, China, Tyler R. Thomas

Theses and Dissertations

The manufacturing industry has become very competitive in today's global market environment. Many US companies are faced with the choice of keeping their manufacturing domestic or looking to low cost off-shore countries to take advantage of the labor costs differences. To gain an understanding of the state of manufacturing in China, a major focus in the manufacturing world today, this thesis was undertaken. This thesis presents the findings of research conducted in Guangdong Province, China in June - July, 2005. This research addressed customer focus, leadership and general manufacturing and quality knowledge and practices of small, medium and large sized …

Go to article

Spot Friction Welding Of Ultra High-Strength Automotive Sheet Steel, Jack H. Sederstrom Mar 2007

Spot Friction Welding Of Ultra High-Strength Automotive Sheet Steel, Jack H. Sederstrom

Theses and Dissertations

Spot friction welding (SFW) was performed on ultra high strength steel (UHSS) steel sheet commonly used in automobile manufacturing. Alloys studied included DP780, DP780EG, DP980, and DF140T sheet steel of varying thickness from 1.2 mm to 1.4 mm. Welding was accomplished using a PCBN standard tool. Weld strengths were then compared to a proposed AWS standard. Initial hardness readings were taken in cross sectioned samples. Grain structure in a SFW is presented. Resistance spot welds were created in three steels. This study focuses on the strength of SFW joints as compared to traditional resistance spot welding (RSW) in welding like …

Go to article

Synthesis Of Gold Micro- And Nano-Wires By Infiltration And Thermolysis, E.A. Olevsky, X. Wang, E. Bruce, M.B. Stern, S. Wildhack, F. Aldinger Feb 2007

Synthesis Of Gold Micro- And Nano-Wires By Infiltration And Thermolysis, E.A. Olevsky, X. Wang, E. Bruce, M.B. Stern, S. Wildhack, F. Aldinger

Industrial and Manufacturing Engineering

An approach for synthesizing micro- and nano-sized gold wires by infiltration and thermolysis is investigated. A porous ZrO2 ceramic preform with aligned pores obtained by unidirectional freezing and freeze-drying is employed as an infiltration template. The sintered porous ZrO2 preform is then infiltrated by a brushing gold solution. The thermolysis is conducted at 600 °C in air. Micro- and nano-sized gold wires are developed within the walls of the pores after thermolysis. The diameter of the gold wires ranges from several hundred nanometers to several microns.

Go to article

Backward And Forward Compatibility, Jianbiao Pan, Jasbir Bath, Xiang Zhou, Dennis Willie Jan 2007

Backward And Forward Compatibility, Jianbiao Pan, Jasbir Bath, Xiang Zhou, Dennis Willie

Industrial and Manufacturing Engineering

In response to the European Union (EU) Restriction of Hazardous Substances (RoHS) and other countries’ impending lead-free directives, the electronics industry is moving toward lead-free soldering. Total lead-free soldering requires not only lead-free solder paste but also lead-free printed circuit board (PCB) finish and lead-free component/packages. Transitioning tin-lead (SnPb) soldering to totally lead-free soldering is a complex issue and involves movement of the whole electronics industry supply chain. In reality, there is a transition period.

Go to article

Optimal Formation Of Supplier Networks For Product Design And Production Phases To Realize An Evolving Product Family, Padmavathi K. Pakala Jan 2007

Optimal Formation Of Supplier Networks For Product Design And Production Phases To Realize An Evolving Product Family, Padmavathi K. Pakala

Masters Theses

"Due to rapid changes in customer requirements and vast improvements in technology, many product development companies have identified strategies like time-to-market (TTM) compression and product family development as critical for attaining success in today's hyper-competitive markets. Compressing the TTM, to a large extent, is dependent on the suppliers and the project execution skills of the integrator companies. This study presents a methodology for selecting suppliers for two significant phases of the product realization process, namely, product design and production. The proposed methodology uses a two-stage approach for supplier selection where suppliers for product design are selected in the first stage …

Go to article

On-Line Inspection And Thermal Properties Comparison For Laser Deposition Process, Yu Yang Jan 2007

On-Line Inspection And Thermal Properties Comparison For Laser Deposition Process, Yu Yang

Masters Theses

"This thesis is focused on comparing the laser deposition cladding with intended design model and comparing the effect of laser deposition process on thermal properties with traditional welding process. It is research on two aspects of laser deposition cladding. The first part of the thesis is aimed at solving the geometric inspection of laser deposition cladding, and the second part is for comparing the thermal properties of laser deposition cladding to samples of conventional welding process"--Introduction, page 1.

Go to article

Towards A Methodology For Integrated Freeform Manufacturing Systems Development With A Control Systems Emphasis, Jacquelyn K. Stroble Jan 2007

Towards A Methodology For Integrated Freeform Manufacturing Systems Development With A Control Systems Emphasis, Jacquelyn K. Stroble

Masters Theses

"A variety of fully integrated Freeform Fabrication (FFF) systems have been developed, a selected group for research and several for commercialization. The design methodology behind most of them is not documented, standardized, or rational. It is important to understand that the final product from any integrated system is affected not only by the unit manufacturing processes themselves, but also by the extent the individual units are assimilated into an integrated process. Thus, a scheme consisting of eight steps and the salient five elements necessary to create or retrofit an existing system to achieve an Integrated Freeform Manufacturing System (FFMS) is …

Go to article

Mechanical Properties And Microstructure Study For Direct Metal Deposition Of Titanium Alloy And Tool Steel, Yaxin Bao Jan 2007

Mechanical Properties And Microstructure Study For Direct Metal Deposition Of Titanium Alloy And Tool Steel, Yaxin Bao

Masters Theses

"This thesis is focused on the research about DMD (Direct Metal Deposition) which is an additive manufacturing process and used in various engineering applications such as producing fully dense and net shape productions in difficult-to-machine materials. In this study, the microstructure was analyzed through optical microscopy and some mechanical properties were tested with different equipments such as SEM (Scanning Electron Microscopy) and micro-hardness tester...In summary, this thesis validated that DMD process can be improved through surface treatments and is capable of repairing molds for die casting industry"--Introduction, page 1.

Go to article

E-Design Tools For Friction Stir Welding: Cost Estimation Tool, Pradeep Kumar Tipaji Jan 2007

E-Design Tools For Friction Stir Welding: Cost Estimation Tool, Pradeep Kumar Tipaji

Masters Theses

"A cost model is an important tool for product design and material selection. An efficient and effective cost estimation tool is necessary for early design evaluation. In this paper, cost estimation models that estimate the production cost for Metal Inert Gas (MIG), Friction Stir (FS), and Friction Stir Spot (FSS) welded joints are presented. These models determine the cost incurred to fabricate each joint along with a detailed explanation of each cost component. Each cost component has been closely analyzed and major cost components have been included in the cost model"--Abstract, page iv.

Go to article

Iii Finishing, Lapping, Honing And Polishing: Processes, Characterisation And Novel Techniques-Experimental Research On Ultra-Smooth Surface Polishing Based On Two-Dimensional Vibration Of Liquid, Zhong Ning Guo, X. Z. Huang, Z. G. Huang, Z. Q. Yu, T. M. Yue, Wing Bun Lee Jan 2007

Iii Finishing, Lapping, Honing And Polishing: Processes, Characterisation And Novel Techniques-Experimental Research On Ultra-Smooth Surface Polishing Based On Two-Dimensional Vibration Of Liquid, Zhong Ning Guo, X. Z. Huang, Z. G. Huang, Z. Q. Yu, T. M. Yue, Wing Bun Lee

Faculty Publications

No abstract provided.

Go to article

Effect Of Chromium–Gold And Titanium–Titanium Nitride–Platinum–Gold Metallization On Wire/Ribbon Bondability, Jianbiao Pan, Robert M. Pafchek, Frank F. Judd, Jason B. Baxter Nov 2006

Effect Of Chromium–Gold And Titanium–Titanium Nitride–Platinum–Gold Metallization On Wire/Ribbon Bondability, Jianbiao Pan, Robert M. Pafchek, Frank F. Judd, Jason B. Baxter

Industrial and Manufacturing Engineering

Gold metallization on wafer substrates for wire/ribbon bond applications requires good bond strength to the substrate without weakening the wire/ribbon. This paper compares the ribbon bondability of Cr-Au and Ti-TiN-Pt-Au metallization systems for an optoelectronic application. Both Chromium and Titanium are used to promote adhesion between semiconductor substrates and sputtered gold films. However, both will be oxidized if they diffuse to the gold surface and result in the degradation of the wire/ribbon bondability. Restoring bondability by ceric ammonium nitrate (CAN) etch was investigated. Experiments were conducted to investigate the effect of Cr-Au and Ti-TiN-Pt-Au, annealing, and CAN etch processes, on …

Go to article

An Evaluation Of Attributes And Competencies For Manufacturing Engineering Technology Graduates, Loni S. Williamson Oct 2006

An Evaluation Of Attributes And Competencies For Manufacturing Engineering Technology Graduates, Loni S. Williamson

Theses and Dissertations

The purpose of this study is to determine the required attributes and competencies required for a graduate from a manufacturing engineering technology baccalaureate program. A document called “Competencies of Manufacturing Engineering Technology Graduates” was compiled in October 2004. This document lists twelve attributes thought to be important for MET graduates: Leadership, Professionalism, Creativity and Problem Solving, Management, Materials, Processes, Quality, Systems, Design, Communication, Safety and Environmental Issues, and Global Awareness. Under each attribute is a list of five to seven competencies creating a total of seventy-three competencies for graduates of an MET baccalaureate program. This list of attributes and competencies …

Go to article

Investigation Of The Lead-Free Solder Joint Shear Performance, James Webster, Jianbiao Pan, Brian J. Toleno Oct 2006

Investigation Of The Lead-Free Solder Joint Shear Performance, James Webster, Jianbiao Pan, Brian J. Toleno

Industrial and Manufacturing Engineering

Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The purpose of this study is to investigate the effects of reflow profile and thermal shock on the shear performance of eutectic SnPb (SnPb) and Sn3.0Ag0.5Cu (SAC305) solder joints. Test boards were assembled with four different sized surface mount chip resistors (1206, 0805, 0603 and 0402). Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb were developed with three levels of peak temperature (12ºC, 22ºC, and 32ºC above solder liquidus temperature, or 230ºC, 240ºC, and 250ºC for SAC …

Go to article

Estimation Of Liquidus Temperature When Snagcu Bga/Csp Components Are Soldered With Snpb Paste, Jianbiao Pan Aug 2006

Estimation Of Liquidus Temperature When Snagcu Bga/Csp Components Are Soldered With Snpb Paste, Jianbiao Pan

Industrial and Manufacturing Engineering

Recently, the soldering of lead-free components with SnPb paste, or lead-free backward compatibility, is becoming a hot topic. One of the major challenges in backward compatibility assembly is the development of a right reflow profile for the soldering of SnAgCu Ball Grid Array (BGA)/Chip Scale Package (CSP) components with SnPb paste. If the SnAgCu reflow profile is used, the reflow temperature may be too high for other SnPb components in the same board during assembly according to the component rating per IPC/JEDEC J-STD-020C. In addition, the flux in SnPb solder paste may not function properly in such a high reflow …

Go to article

Numerical Simulation And Prediction Of Dilution During Laser Deposition, Zhiqiang Fan, Anand Jambunathan, Todd E. Sparks, Jianzhong Ruan, Yu Yang, Yaxin Bao, Frank W. Liou Aug 2006

Numerical Simulation And Prediction Of Dilution During Laser Deposition, Zhiqiang Fan, Anand Jambunathan, Todd E. Sparks, Jianzhong Ruan, Yu Yang, Yaxin Bao, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The laser additive manufacturing technique of laser deposition allows quick fabrication of fully-dense metallic components directly from Computer Aided Design (CAD) solid models. The applications of laser deposition include rapid prototyping, rapid tooling and part refurbishment. The development of an accurate predictive model for laser deposition is extremely complicated due to the multitude of process parameters and materials properties involved. In this work, a heat transfer and fluid flow model is developed. The model is used to predict dilution under varying process parameters for deposits of Ti-6Al-4V. Experimental validation of the predicted dilution is presented. The laser used is a …

Go to article

Automation Of A Hybrid Manufacturing System Through Tight Integration Of Software And Sensor Feedback, Jacquelyn K. Stroble, Robert G. Landers, Frank W. Liou Aug 2006

Automation Of A Hybrid Manufacturing System Through Tight Integration Of Software And Sensor Feedback, Jacquelyn K. Stroble, Robert G. Landers, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper presents a framework for the automation of the Laser Aided Manufacturing Process (LAMP) lab at the University of Missouri-Rolla. The groundwork for the proposed system involves the integration of the LabVIEW software package and a PXI-8195 real time controller with several sensors and actuators. The incorporation of all key control parameters into one virtual instrument will help achieve the goal of an automated hybrid system. To achieve this goal, a five-phase plan, which will be further discussed in the paper, has been developed. The first phase of this plan, which includes the deposition of a thin walled structure …

Go to article

Comparison Of Thermal Properties Of Laser Deposition And Traditional Welding Process Via Thermal Diffusivity Measurement, Yu Yang, Omoghene Osaze Obahor, Yaxin Bao, Todd E. Sparks, Jianzhong Ruan, Jacquelyn K. Stroble, Robert G. Landers, Joseph William Newkirk, Frank W. Liou Aug 2006

Comparison Of Thermal Properties Of Laser Deposition And Traditional Welding Process Via Thermal Diffusivity Measurement, Yu Yang, Omoghene Osaze Obahor, Yaxin Bao, Todd E. Sparks, Jianzhong Ruan, Jacquelyn K. Stroble, Robert G. Landers, Joseph William Newkirk, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Laser deposition is an effective process for mold and die repair. In order to improve the part repair quality, the process impact on thermal diffusivity and thermal conductivity needs to be understood for laser deposited, welded and virgin H13. In this paper, H13 tool steel samples were made by laser deposition, welding and virgin H13 and then cut into pieces. Experiments were conducted to investigate the thermal diffusivity and conductivity. A laser flash method is used to test these samples. The future work and opportunities are also summarized.

Go to article

Evaluation Of Mechanical Properties And Microstructure For Laser Deposition Process And Welding Process, Yaxin Bao, Jianzhong Ruan, Todd E. Sparks, Jambunathan Anand, Joseph William Newkirk, Frank W. Liou Aug 2006

Evaluation Of Mechanical Properties And Microstructure For Laser Deposition Process And Welding Process, Yaxin Bao, Jianzhong Ruan, Todd E. Sparks, Jambunathan Anand, Joseph William Newkirk, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Laser Aided Manufacturing Process (LAMP) can be applied to repair steel die/molds which are currently repaired using traditional welding process in industry. In order to fully understand the advantages of laser deposition repair process over traditional welded-repair process, the mechanical properties such as tensile strength and hardness of H13 tool steel samples produced by these two processes were investigated. The microstructure and fracture surface of the samples were analyzed using optical microscope and SEM (Scanning Electron Microscope). Moreover, depositions on substrates with different shapes were studied to evaluate the performance of LAMP on damaged parts with complicated geometric shape.

Go to article

First Prev Next Last