Open Access. Powered by Scholars. Published by Universities.®

Engineering Science and Materials Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 4561 - 4590 of 5723

Full-Text Articles in Engineering Science and Materials

Time-Economic Lifetime Assessment For High Performance Thermal Barrier Coating Systems, Marion Bartsch, Bernd Baufeld, S. Dalkilic, Iulian Mircea, K. Lambrinou, T. Leist, J. Yan, Anette M. Karlsson Jan 2007

Time-Economic Lifetime Assessment For High Performance Thermal Barrier Coating Systems, Marion Bartsch, Bernd Baufeld, S. Dalkilic, Iulian Mircea, K. Lambrinou, T. Leist, J. Yan, Anette M. Karlsson

Mechanical Engineering Faculty Publications

Strategies for time-economic lifetime assessment of thermal barrier coatings (TBC) in service are described and discussed on the basis of experimental results, achieved on material systems with coatings applied by electron beam physical vapour deposition. Service cycles for gas turbine blades have been simulated on specimens in thermo-mechanical fatigue tests, accelerating the fatigue processes by an increase of load frequency. Time dependent changes in the material system were imposed by a separate ageing, where the samples were pre-oxidized prior to the fatigue test. Results of thermo-mechanical fatigue tests on pre-aged and as-coated specimens gave evidence of interaction between fatigue and …

Go to article

Optimization For Software Release And Crash, Tanvir Khan Jan 2007

Optimization For Software Release And Crash, Tanvir Khan

LSU Master's Theses

Software testing is a process to detect faults in the completeness and quality of developed computer software. Testing is a key process in assuring quality by identifying defects in software, and possibly fixing them, before it is delivered to end-users. A major decision to make during this software testing is, to determine whether to continue testing and eventually releasing the software, or when to stop the test and ‘crash’ it. Such a decision needs to be made to optimally balance the tradeoff between the cost of development and the reliability of the software. In this paper, a new optimal strategy …

Go to article

Electrodeposition Of Multilayered Nanostructures For Giant Magnetoresistance And Thermoelectric Applications, Despina Davis Jan 2007

Electrodeposition Of Multilayered Nanostructures For Giant Magnetoresistance And Thermoelectric Applications, Despina Davis

LSU Doctoral Dissertations

The electrodeposition of novel materials such as multilayer nanotubes for giant magneto resistance (GMR) applications and bismuth telluride nanotubes for thermoelectric applications are presented in this dissertation. The motivation for the multilayer electrodeposition is the investigation of giant magnetoresistance (GMR), a change in the material resistance in an applied magnetic field as a consequence of antiferromagnetic coupling. The nanowire high aspect ratio geometry allows the measurement of GMR with the current applied perpendicular to the plane (CPP) of the multilayers, which has been theoretically identified as being larger than the GMR in the (CIP) configuration (current in plane of multilayers). …

Go to article

Engineering A Photo-Control Mechanism For Rna Interference, Richard Andrew Blidner Jan 2007

Engineering A Photo-Control Mechanism For Rna Interference, Richard Andrew Blidner

LSU Doctoral Dissertations

RNA interference (RNAi) is a phenomenon in which RNA molecules elicit potent and sequence-specific post-transcriptional gene silencing. Nucleic acid chemical modifications have been incorporated to improve their pharmacological properties. Despite numerous developments in chemical modifications for increased stability, safety, and efficiency of these therapeutic agents, they still face challenges of spatial and temporal targeting. One potential targeting strategy uses photocaging techniques, which involves the covalent attachment of photolabile compounds to the effector NA species that blocks bioactivity until exposed to near UV-light. This work demonstrates that fully-2’-fluorinated nucleic acids (FNAs) can elicit RNAi and that these effectors are resistant to …

Go to article

Development Of A Biomass Transducer For Automated Microalgal Bioreactors, Amar Shivaram Hegde Jan 2007

Development Of A Biomass Transducer For Automated Microalgal Bioreactors, Amar Shivaram Hegde

LSU Master's Theses

A highly sensitive miniaturized biomass transducer is necessary for continuous and reliable monitoring of the microalgal biomass in a computer controlled, automated microalgal bioreactor. Previous known methods to determine microalgal biomass applicable in these bioreactors are based on single wavelength turbidimetric or fluorescence. The objectives of this research were to (1) determine the light absorption characteristics of some commercially applicable microalgae in the electromagnetic wavelength range of 200-800 nm (2) design and construct a new miniaturized biomass transducer (3) process the transducer output to correlate with the biomass. Wavelength sensitivity analysis was conducted on the commercially important microalgal species - …

Go to article

Effect Of Hole Configurations On Film Cooling From Cylindrical Inclined Holes For The Application To Gas Turbine Blades, Yiping Lu Jan 2007

Effect Of Hole Configurations On Film Cooling From Cylindrical Inclined Holes For The Application To Gas Turbine Blades, Yiping Lu

LSU Doctoral Dissertations

Film cooling is one of the cooling systems investigated for the application to gas turbine blades. Gas turbines use film cooling in addition to turbulated internal cooling to protect the blades outer surface from hot gases. The present study concentrates on the experimental and numerical investigation of film cooling performance for a row of cylindrical holes in a modern turbine blade. The adiabatic film effectiveness and the heat transfer coefficient are determined experimentally on a flat plate downstream of a row of inclined different geometries hole exit by using a single test transient IR thermography technique. The focus of this …

Go to article

Optimal Control Of Production And Distribution In A Supply Chain System Operating Under A Jit Delivery Policy, Pablo Biswas Jan 2007

Optimal Control Of Production And Distribution In A Supply Chain System Operating Under A Jit Delivery Policy, Pablo Biswas

LSU Doctoral Dissertations

This research deals with a supply chain system where the production or manufacturing facility operates under a just-in-time (JIT) environment, and the facility consists of raw material suppliers, manufacturers, and retailers where inventory of raw materials, work-in-process, and finished goods are involved, respectively. This work considers that the production of finished goods in one cycle starts just after the production or uptime in preceding cycle to minimize the idle time of the facility. Considering this scenario, inventory models are developed for different delivery situations: (a) perfect matching condition where no finished good remains after the shipments and (b) imperfect matching …

Go to article

Semantic Image Retrieval Using Relevance Feedback And Transaction Logs, Amin Shah-Hosseini Jan 2007

Semantic Image Retrieval Using Relevance Feedback And Transaction Logs, Amin Shah-Hosseini

LSU Doctoral Dissertations

Due to the recent improvements in digital photography and storage capacity, storing large amounts of images has been made possible, and efficient means to retrieve images matching a user’s query are needed. Content-based Image Retrieval (CBIR) systems automatically extract image contents based on image features, i.e. color, texture, and shape. Relevance feedback methods are applied to CBIR to integrate users’ perceptions and reduce the gap between high-level image semantics and low-level image features. The precision of a CBIR system in retrieving semantically rich (complex) images is improved in this dissertation work by making advancements in three areas of a CBIR …

Go to article

Aconitic Acid From Sugarcane: Production And Industrial Application, Nicolas Javier Gil Zapata Jan 2007

Aconitic Acid From Sugarcane: Production And Industrial Application, Nicolas Javier Gil Zapata

LSU Doctoral Dissertations

Trans aconitic acid (TAA) is the predominant organic acid in cane leaf matter (CLM) juice. Its concentration is three to six times higher than the level found in sugarcane stalks. The variation of composition in terms of total fermentable sugars (TFS), anions, and cations of the LCP85-384 sugarcane variety during 2003-2006 seasons, as well as the ripener (Polado-L®) effect were analyzed. TAA content ranged between 2.1-3.1 kg / t CLM. The TFS in CLM juice yielded a fermentation efficiency of 92%, four points lower than with sugar molasses. Liquid-liquid extraction (LLE), solid-liquid extraction and ion exchange were evaluated for the …

Go to article

Factors That Influence Visual Attention And Their Effects On Safety In Driving: An Eye Movement Tracking Approach, Larry Bargola Nabatilan Jan 2007

Factors That Influence Visual Attention And Their Effects On Safety In Driving: An Eye Movement Tracking Approach, Larry Bargola Nabatilan

LSU Doctoral Dissertations

Statistics show that a high percentage of road related accidents are due to factors that cause impaired driving. Since information extraction in driving is predominantly a visual task, visual distraction and its implications are therefore important safety issues. The main objective of this research is to study some of the implications of demands to human’s attention and perception and how it affects performance of tasks such as driving. Specifically, the study aims to determine the changes that occur in the visual behavior of drivers with different levels of driving experience by tracking the movement of the eye; examine the effects …

Go to article

Processing Nano Graphene Plates (Ngps) And Ngp Nanocomposite, Yena Li Jan 2007

Processing Nano Graphene Plates (Ngps) And Ngp Nanocomposite, Yena Li

Browse all Theses and Dissertations

In recent years numerous efforts worldwide are addressing all aspects of the rapid developing field of nanocomposites. However, the most important fillers-- carbon nanotube and carbon nanofiber - are expensive. In this study, our efforts are aimed at bridging the gap in cost and properties by providing a systematic study of alternative nano materials -- nano graphene plate (NGP) and related composites. We fabricated nano graphene plates through the detailed study of raw materials, chemical treatment methods and nano particle dispersion methods. A series of thermal expansion experiments were conducted to investigate the best condition to expand acid treated graphite …

Go to article

Comparative Characterization Of Superconducting Thin Films Fabricated By Different Techniques, Padma Prasuna S. Vemulakonda Jan 2007

Comparative Characterization Of Superconducting Thin Films Fabricated By Different Techniques, Padma Prasuna S. Vemulakonda

Browse all Theses and Dissertations

The goal of this thesis is to compare the chemical and compositional profiles, grain structure and critical current densities of superconducting Yttrium Barium Copper Oxide(Y1Ba2Cu3O7-x or YBCO) layers grown by different competing techniques on a variety of substrates and buffer layers. The idea is to check if there can be variation of cationic ratios, impurities, possible diffusion of substrate/buffer layer atoms into the YBCO for different processing methods and microstructures. Pulsed Laser Deposition (PLD), Metal Organic Deposition (MOD) and Metal Organic Chemical Vapor Deposition (MOCVD) films on Ion Beam Assisted Deposited (IBAD)-textured buffer layers and, Rolling Assisted Biaxial textured substrate …

Go to article

Oxidation Resistant Coatings On Microcelluar Carbon Foam Using Simple Scalable Techniques, Dakshinamurthy Sharma Nagalingam Jan 2007

Oxidation Resistant Coatings On Microcelluar Carbon Foam Using Simple Scalable Techniques, Dakshinamurthy Sharma Nagalingam

Browse all Theses and Dissertations

Carbon foam has many applications in the fields of thermal management, net-shape composites and electronic cooling due to its porous structure, low density, electrical and thermal conductivities. However it is prone to oxidation at high temperatures in air. Whereas some previous studies have reported oxidation protective coatings on other carbon structures such as graphite parts and fibers, there is very limited work on foam. Moreover, earlier methods have used vapor phase techniques such as Plasma Vapor Deposition (PVD) and Chemical Vapor Deposition (CVD). There is no known study involving such coatings using simple scalable liquid phase method. This thesis reports …

Go to article

Minute Doping Of Pulsed Laser Deposition Processed Y123 Thin Films With Tb, Ce, And Pr, Joseph William Kell Jan 2007

Minute Doping Of Pulsed Laser Deposition Processed Y123 Thin Films With Tb, Ce, And Pr, Joseph William Kell

Browse all Theses and Dissertations

Three rare earth elements (Tb, Ce, and Pr) were chosen for the investigation into whether adding minute quantities (≤1 at%) of dopants could improve the film quality of YBa2C 3O7-δ(Y123) thin films. The compositions studied are (Y1-x,Rex)Ba2Cu3O7-δ (RE=Tb, Ce, Pr; x=0.1, 0.01, 0.001). Good quality thin films were produced by PLD and showed significant improvement to properties when exposed to a magnetic field. Ce and Pr (x=0.001) doped films showed modest improvement. However, the Tb doped system showed substantial improvement to Jc(H), with a …

Go to article

Low Voltage And Fast Speed All-Polymeric Optocouplers, Yan Yao, Hsiang-Yu Chen, Jinsong Huang, Yang Yang Jan 2007

Low Voltage And Fast Speed All-Polymeric Optocouplers, Yan Yao, Hsiang-Yu Chen, Jinsong Huang, Yang Yang

Department of Mechanical and Materials Engineering: Faculty Publications

An all-polymeric optocoupler has been demonstrated with a polymer light-emitting diode (PLED) as the light source (input unit) and a polymer/fullerene photodiode (PD) as the detector (output unit). The electroluminescence (EL) peak of the PLED is 560 nm, and the entire EL spectrum is within the response range of the PD. The optocoupler can work at low driving voltages, 5 V on the PLED and 0 V on the PD. The output photocurrent increases linearly with input current, and the current density transfer ratio reaches 1.5%. The frequency response of the optocoupler is at 500 kHz. With comparable performance to …

Go to article

Origin Of Photomultiplication In C60 Based Devices, Jinsong Huang, Yang Yang Jan 2007

Origin Of Photomultiplication In C60 Based Devices, Jinsong Huang, Yang Yang

Department of Mechanical and Materials Engineering: Faculty Publications

In this manuscript, the origin of the photomultiplication effect was studied in C60 based devices by evaluating the wavelength dependent external and internal quantum efficiencies under various biases. The effect of materials with disordered structures on the photomultiplication effect was determined by intentionally integrating both ordered and disordered material structures into one organic solar cell device with a configuration of indium tin oxide/poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS)/pentacene/C60 fullerene/bathocuproine (BCP)/Al. Our results show that both the disordered structure of C60 and the charge trapping effect at the C60 /PEDOT:PSS interface contribute to the photomultiplication effect. By studying the C60-only …

Go to article

Deck-Mounted Steel Post Barrier System, John D. Reid, Ronald K. Faller, Jason A. Hascall Jan 2007

Deck-Mounted Steel Post Barrier System, John D. Reid, Ronald K. Faller, Jason A. Hascall

Department of Mechanical and Materials Engineering: Faculty Publications

An existing mountable safety barrier system, previously crash tested successfully on a wood bridge deck, was evaluated for use on a fiber reinforced plastic (FRP) bridge deck. In an attempt to avoid expensive full-scale crash testing, components of the existing system were evaluated using worst case conditions on two dynamic bogie crash tests and a series of computer simulations using nonlinear finite-element analysis. Simulation results closely approximated the physical results, with both displaying similar deformation, damage, and force levels. Both testing and simulation demonstrated that the barrier should function sufficiently if used on the FRP deck system. Further, the development …

Go to article

Regional Mechanical Properties And Stress Analysis Of The Human Anterior Lens Capsule, Ryan M. Pedrigi, G. David, J. Dziezyc, J. D. Humphrey Jan 2007

Regional Mechanical Properties And Stress Analysis Of The Human Anterior Lens Capsule, Ryan M. Pedrigi, G. David, J. Dziezyc, J. D. Humphrey

Department of Mechanical and Materials Engineering: Faculty Publications

The lens capsule of the eye functions, in part, as a deformable support through which the ciliary body applies tractions that can alter lens curvature and corresponding refractive power during the process of accommodation. Although it has long been recognized that characterization of the mechanical properties of the lens capsule is fundamental to understanding this physiologic process as well as clinical interventions, prior data have been limited by one-dimensional testing of excised specimens despite the existence of multiaxial loading in vivo. In this paper, we employ a novel experimental approach to study in situ the regional, multiaxial mechanical behavior of …

Go to article

A Scientific Foundation Of Collaborative Engineering, S. C.-Y. Lu, W. Elmaraghy, G. Schuh, R. Wilhelm Jan 2007

A Scientific Foundation Of Collaborative Engineering, S. C.-Y. Lu, W. Elmaraghy, G. Schuh, R. Wilhelm

Department of Mechanical and Materials Engineering: Faculty Publications

Collaborative engineering is the practical application of collaboration sciences to the engineering domain. In today’s highly connected technology-driven economy, the production industry must rely on the best practices of collaborative engineering to stay competitive when designing, manufacturing, and operating complex machines, processes, and systems on a global scale. Despite its importance, collaborative engineering is currently more of a practiced art than a scientific discipline. A better understanding of how engineers should collaborate with all stakeholders to accomplish complex tasks that fulfill our increasing social responsibilities is a grand challenge. However, because we currently lack well-defined sciences of human collaboration, we …

Go to article

Emission Reduction In Small Displacement Diesel Engines Using Cooled Exhaust Gas Recirculation, Chris Simoson Dec 2006

Emission Reduction In Small Displacement Diesel Engines Using Cooled Exhaust Gas Recirculation, Chris Simoson

All Theses

A reduced-order dynamic model is presented and experimentally validated to demonstrate the use of cooled exhaust gas recirculation to alleviate the tradeoff between nitric oxide reduction and performance preservation in a small displacement diesel engine. Exhaust gas recirculation (EGR) is an effective method for internal combustion engine oxides of nitrogen (NOx) reduction, but its thermal throttling diminishes power efficiency. The capacity to cool exhaust gases prior to merging with intake air may achieve the desired pollutant effect while minimizing engine performance losses.
Simulation and experimental results revealed significant NOx reductions throughout all testing scenarios using EGR, but also experienced a …

Go to article

Single-Sided Crash Cushion System, John D. Reid, John R. Rohde, Dean L. Sicking Dec 2006

Single-Sided Crash Cushion System, John D. Reid, John R. Rohde, Dean L. Sicking

Department of Mechanical and Materials Engineering: Faculty Publications

A single-sided crash attenuation cushion system having an impact head and three stage energy absorption mechanism. The energy absorbing mechanism has a mandrel for deforming thin-walled tubes in a controlled collapse to absorb impact forces from a colliding vehicle. The third stage of the absorption mechanism includes an additional deformable compressible tube between the fixed-object hazard and the thin walled tubes.

Go to article

Modeling Of The Transient Behavior Of Heat Pipes With Room-Temperature Working Fluids, Pascal Brocheny Dec 2006

Modeling Of The Transient Behavior Of Heat Pipes With Room-Temperature Working Fluids, Pascal Brocheny

All Dissertations

The heat pipe is a capillary-driven and two-phase flow device, capable of transporting and converting large amounts of energy with minimal losses. As a means of thermal management, uses of heat pipe technology not only include thermal control of satellites and spacecrafts in aerospace applications, but also the cooling of electronic components for ground applications. Recently, there has been a flourishing interest in exploring the use of heat pipe technology in the automotive field. However, in many thermal control applications, heat pipes using room-temperature working fluids, such as water or ammonia, with operating temperatures between 200 K (-73ºC) and 550 …

Go to article

Simulation And Characterization Of Tire Nonuniformity-Induced Steering Nibble Vibrations Through Integrated Subsystems Modeling, Derek Mangun Dec 2006

Simulation And Characterization Of Tire Nonuniformity-Induced Steering Nibble Vibrations Through Integrated Subsystems Modeling, Derek Mangun

All Theses

Periodic force variations produced by nonuniform tire/wheel assemblies are known root causes of torsional steering wheel vibrations known as 'nibble'. Previous studies have sought to investigate this issue through modeling or experimentation involving the entire vehicle or specific subsystems, however a direct link between objectively measured tire force variations and the vibration levels perceived by vehicle occupants has yet to be established. Analytical models of a nonuniform tire, double-wishbone suspension system, and rack and pinion steering system are sourced from literature and integrated into a single subsystem-level model validated against experimental data obtained as part of a collaborative effort. The …

Go to article

A Robust Conjugate Heat Transfer Methodology With Novel Turbulence Modeling Applied To Internally-Cooled Gas Turbine Airfoils, William York Dec 2006

A Robust Conjugate Heat Transfer Methodology With Novel Turbulence Modeling Applied To Internally-Cooled Gas Turbine Airfoils, William York

All Dissertations

Computational fluid dynamics and heat transfer (CFD) has become a viable, physics-based analysis tool for complex flow and/or heat transfer problems in recent years due, in large part, to rapid advances in computing power. CFD based on the Reynolds-averaged Navier-Stokes (RANS) equations is starting to enter the mainstream design environment in certain industries where rapid and reliable predictive capability is necessary. One such application is the gas turbine industry, where thermal management of airfoils at extremely high temperatures is one of the most critical components in engine design for reliability. The problem is complicated by the need for advanced airfoil …

Go to article

Investigation Of The Effects Of Subgrid-Scale Turbulence On Resolvable-Scale Statistics, Qinglin Chen Dec 2006

Investigation Of The Effects Of Subgrid-Scale Turbulence On Resolvable-Scale Statistics, Qinglin Chen

All Dissertations

The effects of the subgrid-scale (SGS) turbulence on the resolvable-scale statistics and the effects of SGS models on large-eddy simulation (LES) are studied. It is shown that the SGS turbulence evolves the resolvable-scale joint probability density function (JPDF) through the conditional means of the SGS stress, the SGS scalar flux, and their production rate, which must be reproduced by the SGS model for LES to predict correctly the one-point resolvable-scale statistics, a primary goal of LES. This necessary condition is used as the basis for studying SGS physics and for testing SGS models. Theoretical predictions, measurements data obtained in a …

Go to article

Modeling And Simulation Of Friction-Limited Continuously Variable Transmissions, Nilabh Srivastava Dec 2006

Modeling And Simulation Of Friction-Limited Continuously Variable Transmissions, Nilabh Srivastava

All Dissertations

Over the last few decades, a lot of research effort has increasingly been directed towards developing vehicle transmissions that accomplish the government imperatives of increased vehicle efficiency and lower exhaust (greenhouse gaseous) emissions. These exhaust emissions can be regulated or lowered by increasing the fuel economy of a vehicle, and CVTs (continuously variable transmissions), indubitably, play a crucial role in this plan to improve the fuel economy. A continuously variable transmission is an emerging automotive transmission technology that offers a continuum of gear ratios between desired limits. A CVT offers numerous advantages over the conventional multi-step gear transmissions such as …

Go to article

The Effects Of Viscoelastic Behavior On The Operation Of A Delayed Resonator Vibration Absorber, John Cowans Dec 2006

The Effects Of Viscoelastic Behavior On The Operation Of A Delayed Resonator Vibration Absorber, John Cowans

All Theses

Delayed resonators have proven to be effective vibration absorbers (VAs) for tracking and canceling the effects of harmonic excitations on a structure. The Delayed Resonator (DR) is selfcontained, as no information from outside of its substructure is required for proper operation. It adjusts for variations in frequency using time-delay and gain as control parameters.
This thesis examines the relationship between viscoelastic (VE) loss mechanisms in systems with DR and the choice of modeling method used to calculate control parameters and determine system stability. It is hypothesized that a VE loss mechanism approximated by a single viscous dashpot may lead to …

Go to article

Internal Combustion Engine Cooling Strategies: Theory And Test, John Chastain Dec 2006

Internal Combustion Engine Cooling Strategies: Theory And Test, John Chastain

All Theses

Advanced internal combustion engine thermal management systems can enhance overall engine performance through the use of computer controlled cooling system actuators. Existing ground vehicle cooling systems generally have performance limitations due to the fixed behavior of the wax-based thermostat valve and crankshaft dependent operation of the coolant pump and radiator fan. Upgrading the traditional thermostat valve, water pump, and radiator fan with actuators permit real time computer control for improved temperature tracking and reduced power consumption. In this paper, the benefits associated with advanced automotive cooling systems are experimentally investigated. A 4.6L engine with a real-time data acquisition and control …

Go to article

Synergistic Functions Of Trimethl Phosphate And Vinylene Carbonate As Additives For The Li-Ion Batteries, Zhi-Yuan Tang, Yan-Bing He, Quan-Sheng Song, Yu-Hong Chen, Yuan-Gang Liu, Qiang Liu Nov 2006

Synergistic Functions Of Trimethl Phosphate And Vinylene Carbonate As Additives For The Li-Ion Batteries, Zhi-Yuan Tang, Yan-Bing He, Quan-Sheng Song, Yu-Hong Chen, Yuan-Gang Liu, Qiang Liu

Journal of Electrochemistry

The cooperative effects of trimethl phosphate and vinylene carbonate as additives for Li-ion batteries are investigated by using the cyclic voltammetry,electrochemical impedance spectroscopy and scanning electronic micro-photographs.The results show that the combination application of TMP and VC as additives for Li-ion batteries not only enhances safety of the batteries,but also improves their cycling performance.The reason may be ascribed to firstly VC being reduced and the reduction product polymerized to form excellent solid electrolyte interface(SEI) layer on the surface of graphite electrode during the first charge and discharge process,which prevents effectively the decomposition of TMP on the surface of the graphite …

Go to article

Facilitated Effect Of Ag To Oxygen Transportation In Pem Fuel Cell Air Cathodes, Hong-Feng Xu, Jian-Hua Dong, Xiang-Li Hou Nov 2006

Facilitated Effect Of Ag To Oxygen Transportation In Pem Fuel Cell Air Cathodes, Hong-Feng Xu, Jian-Hua Dong, Xiang-Li Hou

Journal of Electrochemistry

Silver(Ag) was deposited in the pores of Nafion membrane by ion exchange and succedent hydrogen reduction;the structures of Nafion-Ag membrane were measured by TEM and XRD,the diffusion coefficients of oxygen in Nafion-Ag was determined by electrochemical limited current method.The results showed that after deposited silver,the pores in the Nafion were enlarged by silver grains;the oxygen diffusion coefficient was increased about four times.By introducing silver in the thin Nafion film around the cathode catalyst,the performance of PEM fuel cell have a evident increasing in high current density, which shows the facilitated effects of silver to oxygen transportation in PEM fuel cell.

Go to article

First Prev Next Last