Engineering Science and Materials Commons^™

Design And Development Of Biomimetic Hydrogel Interfaces For Enhanced Bioelectrical Signal Acquisition, Daniela Nikoloska

UNLV Theses, Dissertations, Professional Papers, and Capstones

Every second, human skin processes over one million sensory signals while maintaining properties such as electrical conductivity, mechanical adaptability, and regenerative capability that surpass all synthetic materials. Contemporary bioelectronic devices prove inadequate when contacting skin surfaces due to poor adhesion and electrical contact issues that prevent effective sensing. Despite advancements in wearable and bioelectronic technologies, current devices face major drawbacks when interfacing with human skin, particularly in maintaining firm adhesion, conformability, and low-noise electrical signal acquisition.

This research focuses on the development of a biomimetic hydrogel-based interface for bioelectronic sensing. Specifically, a hybrid hydrogel system composed of polydopamine (PDA)- doped …

Functional Biopolymers Applied To Sustainable Technologies In The Environment And Healthcare, Fengjie He

UNLV Theses, Dissertations, Professional Papers, and Capstones

Biodegradable polymeric materials (biopolymers) are naturally derived materials known for their excellent biocompatibility, biodegradability, sustainability, and versatile chemical functionality. They have attracted increasing attention in various applications as alternative to synthetic materials ranging from food packaging to tissue engineering. Meanwhile, with intrinsic advantages, biopolymers have also emerged as promising materials in addressing contemporary challenges in both biomedical and environmental fields. Motivated by the significant potential of biopolymers and the growing need for sustainable materials, my research focuses on the design and engineering of biodegradable polymers with novel modification methods and application directions. In this work, two representative biopolymers are selected: …

Bio-Inspired Electroactive Polymer (Eap) Sensors For Surface And Canal Flow Sensing In Dynamic Environments, Nazanin Minaian

UNLV Theses, Dissertations, Professional Papers, and Capstones

Nature can often create some of the most efficient and elegant solutions to complex problems, and engineering stands to benefit greatly from these time-tested designs. One of the more sophisticated examples of this is the lateral line system in fish: a distributed network of superficial and canal neuromasts that enables aquatic species to detect fluid disturbances with remarkable precision. This dissertation leverages that biological framework to explore the potential of electroactive polymers (EAPs), aiming not just to replicate structure, but to emulate function.Two classes of EAPs form the basis of this work: electroactive plasticized polymer gels (EPPGs) and ionic polymer-metal …

Removal Capabilities Of Zeolite And Zero Valent Iron With High-Level Waste Tank Radionuclides And Metals: Cesium, Strontium And Chromium, Colette R. Towles

UNLV Theses, Dissertations, Professional Papers, and Capstones

High level nuclear waste (HLW) has been disposed for temporary storage in underground steel tanks at the Department of Energy Nuclear sites. For example, at the Hanford Site, WA, and Savannah River Site (SRS), SC, HLW account for eighty-eight million gallons (Mgal) and 450 million Curies (MCi) of radioactivity. In the early nuclear activity at Hanford, the waste was discharged to single-shell steel tanks, and the lack of secondary containment allowed leaks, contaminating soil and groundwater. Despite tremendous efforts to stabilize the liquid waste at nuclear sites, treatment is complex, costly, and time-consuming; therefore, HLW may have to be stored …

Density-Driven Investigations Of Ruthenium Binary Compounds Rux2 (X = O, S, N), Melanie White

UNLV Theses, Dissertations, Professional Papers, and Capstones

Exploration and fine-tuning of the energy landscape of materials can be accessed by means of changes in material density, a key principle of high pressure research. Density-driven changes impact variations in oxidation states and coordination numbers for the element constituents of a compound. Pressure-induced modification of intrinsic density can promote the formation of new materials, variations in physical properties, and transformations in crystallographic symmetry. With this as our foundation, we focus on ruthenium binary compounds - altering the anion species to change electronegativity while probing pressure and temperature effects. This led us to the present study of ruthenium oxide RuO2, …

Development Of Uranium Fluoride Microstructures, Harry Jang

UNLV Theses, Dissertations, Professional Papers, and Capstones

Uranium microstructured materials with controlled size and shape have found applications in several branches of the nuclear industry including as targets for medical isotopes production, fuels for nuclear reactors, standards for analytical measurements, and energy sources for space exploration. Morphological studies of actinide materials are also highly relevant to nuclear forensics-related work. Other potential applications include information storage, catalysis, sensors, and luminescent devices. Most studies on uranium microstructured materials have focused on binary oxides, nitrides, carbides, and fluorides, with the spherical shape being the dominant morphology. Prior to the work reported in this dissertation, aside from UF4 microspheres (ms) and …

Characterizing The Mechanical And Visoelastic Properties Of Sodium Alginate, Vesper Evereux

Undergraduate Research Symposium Posters

A crucial part of tissue engineering lies in understanding and characterizing the mechanical and viscoelastic properties of various types of biomaterials. Understanding these properties allows better biomaterials to be produced with characteristics more similar to those of the human body and with better biocompatability. In this study, sodium alginate was chemically crosslinked with calcium chloride and subsequently tested for it's instantaneous Elastic Modulus, instantaneous Shear Modulus, and equivalent viscosity using indentation testing methods consisting of a stress-relaxation test and nonlinear curve-fitting analysis. Two and three millimeter indentation tests were performed using a low-cost and portable device built in-lab that resulted …

Boron-Doped Diamond As A Resilient Electrode Material In Molten Salts, Hannah Katherine Patenaude

UNLV Theses, Dissertations, Professional Papers, and Capstones

Molten salt chemistry has a range of applications within nuclear technology, including for the Molten Salt Reactors (MSRs) and pyroprocessing to recover valuable actinides for energy and national security needs. However, the high-temperature, corrosive nature of molten salts makes them particularly challenging to deploy on an industrial scale and study in benchtop measurements. Material accountability and corrosion monitoring of MSR fuels are essential components to the successful deployment of MSRs, and electroanalytical techniques like cyclic voltammetry (CV) and spectroelectrochemistry (SEC) can provide a wealth of information to describe salt systems in situ. To perform such measurements, it is imperative to …

Engineered Biomass-Derived Carbon Adsorbents For Targeted Contaminant Remediation From Aqueous Environments, Suraj Venkat Pochampally

UNLV Theses, Dissertations, Professional Papers, and Capstones

Porous carbon adsorbents like biochar (BC) are produced from waste biomasses like wood chips, animal litter, nut shells, dried grass, etc. to be used in a multitude of applications like gas capture, soil amendment, water treatment, electrode materials, etc. In water treatment, carbon-based adsorbents have been mainly used to physically or chemically adsorb contaminants depending on the adsorption mechanism. However, BCs in their raw state do not have the capability of absorbing high amounts of contaminants and need to be activated/ modified for the pore network to broaden and adsorb the contaminants with better efficiency.

The scope of this dissertation …

Development And Characterization Of Lead & Lead-Free Perovskite Solar Cell Materials, Rubaiya Murshed

UNLV Theses, Dissertations, Professional Papers, and Capstones

In recent years, perovskite photovoltaic technology has offered enormous viability and dimensionality in solar cell research. As a light-harvesting active layer, Perovskite generated remarkable development in device efficiency of 25.7% for the single-junction solar cell, and over 33% for the perovskite/silicon tandem solar cell. Also, perovskite-perovskite tandem solar cell (also called all-perovskite tandem solar cell) shows great potential in device performance and achieved a power conversion efficiency (PCE) of 26.4%. Transitioning photovoltaic technology from the laboratory to commercial products, high PCE, low cost, long lifetime, and low toxicity are some of the critical factors to consider during material selection. Pb-halide …

Recent Developments In Timber Design & Its Impact On Carbon Emissions, Raquel Jackson

Spectra Undergraduate Research Journal

This paper explores recent developments in timber building designs and its potential towards reducing carbon emissions. Carbon dioxide emissions are a growing issue worldwide as urbanization and industrialization continues to increase. The rising concentration of carbon dioxide emissions pose significant concerns towards public welfare and environmental health. Despite current methods to reduce greenhouse gasses, carbon emissions remain difficult to reduce from steel and concrete industries. Increasing timber use in building design is a possible solution. Increasing more timber in building design can help reduce carbon emissions due to the carbon-absorbing properties of the construction material. Timber as a construction material …

Metastability And Degradation In Cu(In,Ga)Se2 Thin-Film Solar Cells, Mohsen Jahandardoost

UNLV Theses, Dissertations, Professional Papers, and Capstones

Cu(In,Ga)(S,Se)2 or CIGS is a thin-film semiconductor that has shown a device efficiency of 23.35% and 24.2% for single-junction and perovskite/CIGS tandem solar cells, respectively. CIGS offers promising properties such as tunable bandgap and ease of processing making them great candidates for thin-film tandem devices. However, knowledge of the effect of material defects, buffer materials, and post-deposition treatment (PDT) on degradation and metastability behavior in these devices is not well understood.In this dissertation, metastability and long-term degradation of CIGS thin-film solar cells have been investigated under combinatorial stress factors of heat, light, and voltage bias to systematically understand the effect …

High-Yield Bioinspired Atmospheric Water Capture Through Hydrogels, Yiwei Gao

UNLV Theses, Dissertations, Professional Papers, and Capstones

Water scarcity is a global issue affecting billions of people, and atmospheric water harvesting (AWH) technology has been identified as a potential solution. However, existing single-material AWH approaches have limited water harvesting yields due to alternated water capture, storage, and release stages, and only function within a high relative humidity range. In my doctoral research project, we developed a bio-inspired, hydrogel-based multi-layer AWH approach that allows for segregated capture, storage, and release stages, and is envisioned to have higher daily water harvesting efficiency even in low-humidity areas. My research began with understanding the relations between hydrogel mechanical stiffness, hydraulic permeability, …

Spectroscopic Studies On Silicon And Chalcopyrite Materials For Solar Energy Applications, Amandee Hua

UNLV Theses, Dissertations, Professional Papers, and Capstones

In this dissertation, silicon-based materials for photovoltaics and chalcopyrite-based materials for photoelectrochemical water splitting are investigated using various spectroscopic and microscopic techniques. Although silicon dominates the photovoltaic market, further improvement can be made by using an alternative low temperature passivation approach. Currently, thermally grown SiO2 passivation is commonly used for silicon solar cells. However, this technique requires high processing temperatures (>800 °C), which increases the thermal budget, potentially decreases the bulk quality of Si, and can lead to difficulties in implementing in production lines. Here, a S-based passivation approach is studied that require lower processing temperatures of ~550 °C. …

Oh, My Darling Clementine: A Detailed History And Data Repository Of The Los Alamos Plutonium Fast Reactor, Hannah K. Patenaude, Franz J. Freibert

College of Sciences Graduate Student Research

The Los Alamos Plutonium Fast Reactor, Clementine, provided the first fast neutron spectrum using a metallic plutonium fuel system and liquid mercury coolant. Clementine is often mentioned in the history of fast, metal-fueled, or metal-cooled designs, with little public information regarding the specifications or timeline. This paper contains a synopsis of each report regarding the development, operation, experimental results, failures, and subsequent disassembly of Clementine to explore this unique reactor within the context of modern advanced reactor development.

Towards The Electronic Response Of Carbon-Based Van Der Waals Heterostructures In A Diamond Anvil Cell, George Thomas Foskaris

UNLV Theses, Dissertations, Professional Papers, and Capstones

The nanoscale regime of materials has been at the forefront of research and interest in condensed matter physics for many years. In a merger of the fields of two-dimensional (2D) materials and high pressure physics, we present an investigation of the electronic response of carbon-based, van der Waals (vdW) heterostructures in a diamond anvil cell (DAC). Combining these fields presents us with the ability to study the characteristics of such systems both optically, and through electrical transport. Properties such as conductance, band structure, and layer number are considered. The samples in this study are assembled using exfoliation and stacking techniques …

Assessment Of Quality Of Fresh Concrete Delivered At Varying Temperatures, Maroua Saidi, Kazem Jadidi, Moses Karakouzian

Civil and Environmental Engineering and Construction Faculty Research

Concrete is increasingly utilized in the construction field in Southern Nevada. This area has an arid and hot summer and freezing cold winter conditions. These extreme conditions affect the properties of fresh concrete, which can cause cracking. Hot weather conditions may adversely affect both fresh and hardened concrete properties. Even though practices can minimize the detrimental effects, good quality control of fresh concrete, from mixing to finishing, is crucial under hot weather conditions. The objective of the present study is to evaluate the seasonal consistency of concrete quality, considering strength and slump properties. Another objective of this research is to …

Polyvinyl Chloride Gels: Theoretical Modeling Of Their Actuation Mechanism And Characterization Of Their Properties, Zachary Frank

UNLV Theses, Dissertations, Professional Papers, and Capstones

Polyvinyl chloride (PVC) gels are an electroactive polymer smart material which has been considered in a variety of actuator applications. Their large deformation, fast response rates, optical transparency, and soft nature has made them a key area of interest in fields ranging from soft robotics to optics. PVC gels are made from PVC mixed with large quantities of plasticizer, such as dibutyl adipate (DBA). When a voltage is applied, the gel experiences an “anodophilic” deformation (in which it moves preferentially towards the anode). This unique characteristic is the result of a charge buildup near the anode surface, which creates electromechanical …

Coupling Methylammonium And Formamidinium Cations With Halide Anions: Hybrid Orbitals, Hydrogen Bonding, And The Role Of Dynamics, Chinnathambi Kamal, Dirk Hauschild, Linsey Seitz, Ralph Steininger, Wanli Yang, Clemens Heske, Lothar Weinhardt, Michael Odelius

Chemistry and Biochemistry Faculty Research

The electronic structures of four precursors for organic-inorganic hybrid perovskites, namely, methylammonium chloride and iodide, as well as formamidinium bromide and iodide, are investigated by X-ray emission (XE) spectroscopy at the carbon and nitrogen K-edges. The XE spectra are analyzed based on density functional theory calculations. We simulate the XE spectra at the Kohn-Sham level for ground-state geometries and carry out detailed analyses of the molecular orbitals and the electronic density of states to give a thorough understanding of the spectra. Major parts of the spectra can be described by the model of the corresponding isolated organic cation, whereas high-emission …

A Hyperelastic Porous Media Framework For Ionic Polymer-Metal Composites And Characterization Of Transduction Phenomena Via Dimensional Analysis And Nonlinear Regression, Zakai J. Olsen

UNLV Theses, Dissertations, Professional Papers, and Capstones

Ionic polymer-metal composites (IPMC) are smart materials that exhibit large deformation in response to small applied voltages, and conversely generate detectable electrical signals in response to mechanical deformations. The study of IPMC materials is a rich field of research, and an interesting intersection of material science, electrochemistry, continuum mechanics, and thermodynamics. Due to their electromechanical and mechanoelectrical transduction capabilities, IPMCs find many applications in robotics, soft robotics, artificial muscles, and biomimetics. This study aims to investigate the dominating physical phenomena that underly the actuation and sensing behavior of IPMC materials. This analysis is made possible by developing a new, hyperelastic …

Toward Understanding Large Deflection Bending Of 3d Printed Ninjaflex®, Lucas K. Gallup, Mohamed Trabia, Brendan O’Toole, Youssef Fahmy

College of Engineering Faculty Research

NinjaFlex® is a thermoplastic polyurethane filament that is primarily used for 3D printing. Aside from its low cost and availability, this material is highly flexible, durable, and has a low coefficient of friction. While NinjaFlex® was introduced approximately two decades ago, a comprehensive understanding of the filament’s mechanical behavior, especially in the context of the effect of 3D printing, is still lacking. The goal of this research is to gain a better understanding of the behavior of 3D printed NinjaFlex® specimens when subjected to bending loads that cause large deflection. A series of experiments were conducted to test the bending …

Developments Of Machine Learning Potentials For Atomistic Simulations, Howard Yanxon

UNLV Theses, Dissertations, Professional Papers, and Capstones

Atomistic modeling methods such as molecular dynamics play important roles in investigating time-dependent physical and chemical processes at the microscopic level. In the simulations, energy and forces, sometimes including stress tensor, need to be recalculated iteratively as the atomic configuration evolves. Consequently, atomistic simulations crucially depend on the accuracy of the underlying potential energy surface. Modern quantum mechanical modeling based on density functional theory can consistently generate an accurate description of the potential energy surface. In most cases, molecular dynamics simulations based on density functional theory suffer from highly demanding computational costs. On the other hand, atomistic simulations based on …

Chemical And Electronic Surface Structure Of Chalcopyrite-Based Thin Films For Solar Water Splitting, James C. Carter

UNLV Theses, Dissertations, Professional Papers, and Capstones

In recent years, various thin film solar devices have reached markedly high efficiencies on both the laboratory and large area scale. To further evaluate their potential, and help drive device optimization of efficient solar devices, a detailed understanding of the chemical and electronic structure of the surfaces and interfaces is required. It is these interfaces that play a pivotal role in dictating aspects of device performance. Chalcopyrite-based materials, such as Cu(In,Ga)S2 (CIGS) are regarded as one of the most promising absorber materials for use in highly efficient solar devices. In the context of photoelectrochemical (PEC) hydrogen generation, the tunability of …

Design Of Efficient Carbon-Based Adsorbents For The Removal Of Organic And Inorganic Water Contaminants, Sayedeh Soroosh Mortazavian Dehkordi

UNLV Theses, Dissertations, Professional Papers, and Capstones

Granular activated carbon (AC) and biochar (BC) are two carbon-based adsorbents commonly used for water and wastewater treatment. However, these adsorbents have drawbacks that suppress their aqueous contaminants removal efficiency. Their major disadvantages are that AC has low selectivity and reusability potential, and BC has a hydrophobic nature.

The scope of this dissertation is to enhance the performance of commonly-used carbon-based adsorbents for the removal of organic and inorganic water contaminants and to understand the interactive mechanism of contaminants’ ions/molecules with adsorbents. Hexavalent chromium (Cr(VI)) and trichloroethylene (TCE) are two types of inorganic and organic water contaminants, respectively, which are …

Pressure Driven Electronic Band Gap Engineering In Tin(Iv)-O,N Compounds, Daniel Thomas Sneed

UNLV Theses, Dissertations, Professional Papers, and Capstones

The intrinsic link between long-range order, coordination geometry, and the electronic properties of a system must be understood in order to tailor function-specific materials. Although material properties are typically tailored using chemical dopants, such methods can cause irreversible changes to the structure, limiting the range of functionality. The application of high pressure may provide an alternative “clean” method to tune the electronic properties of semiconducting materials by tailoring their defect density and structure.

We have explored a number of optoelectronic relevant materials with promising characteristics, specifically Sn-(O,N) compounds which have been predicted to undergo pressure-mediated opening of their optical band …

Abrasion Resistance Of High Early-Strength Concrete For Rapid Repair, Nader Ghafoori, Matthew O. Maler, Meysam Najimi, Ariful Hasnat

Civil and Environmental Engineering and Construction Faculty Research

This paper examines the abrasion resistance of high early-strength concrete developed for rapid repair of highways and bridge decks. The cement types chosen for this study included ASTM Type III, ASTM Type V, and Calcium Sulfoaluminate (CSA) cements. A cement content of 386 kg/m3 (650 lb/yd3 ) was maintained for all studied concretes. Test samples were tested after 24 hours and 28 days of curing in order to evaluate compressive strength and depth of wear. Test results revealed that the opening time to attain minimum required compressive strength for CSA cement concrete was one hour, whereas the values for Type …

Rheological Properties Of Modified Crumb Rubber Asphalt Binder And Selecting The Best Modified Binder Using Ahp Method, Mehdi Khalili, Kazem Jadidi, Moses Karakouzian, Serji Amirkhanian

Civil and Environmental Engineering and Construction Faculty Research

Crumb rubber modifier (CRM) is one of the most popular asphalt binder modifiers due to the economic benefits and desired physical and rheological properties of asphalt binders and asphalt mixes. This research focuses on evaluating the properties of rubber-modified asphalt binders and selecting the best modified binder. The modified binders were produced by blending virgin binders with CRM at various contents of different gradations, and different methods of grinding. CRM made through ambient and cryogenic grinding methods with two gradation sizes were produced and tested. Three different virgin binders from two sources were obtained and used. The Analytic Hierarchy Process …

Microstructural Effects On Photocatalytic Performance In Ag3po4/Bi2moo6 Z-Scheme Photocatalyst Systems, Kaleab Mengesha Ayalew

UNLV Theses, Dissertations, Professional Papers, and Capstones

As the world population continues to grow and access to modern industry become increasingly common, humanity finds itself amid an environmental and energy crisis. Natural resources, such as clean water are getting scarce. Currently, the development of high efficiency, green energy sources, and eco-friendly methods for water treatment have become a nonelective task. As a result, photocatalysis, as one of the most promising technologies in utilizing solar energy and pollutant removal, has attracted considerable attention.

However, the practical application of photocatalysis is still elusive because of the difficulty of finding an individual material that can satisfy all the requirements for …

High-Performance Polyvinyl Chloride Gel Artificial Muscle Actuator With Graphene Oxide And Plasticizer, Taeseon Hwang, Zachary Frank, Justin Neubauer, Kwang Jin Kim

Mechanical Engineering Faculty Research

A transparent and electroactive plasticized polyvinyl chloride (PVC) gel was investigated to use as a soft actuator for artificial muscle applications. PVC gels were prepared with varying plasticizer (dibutyl adipate, DBA) content. The prepared PVC gels were characterized using Fourier-transform infrared spectroscopy, thermogravimetric analysis, and dynamic mechanical analysis. The DBA content in the PVC gel was shown to have an inverse relationship with both the storage and loss modulus. The electromechanical performance of PVC gels was demonstrated for both single-layer and stacked multi-layer actuators. When voltage was applied to a single-layer actuator and then increased, the maximum displacement of PVC …

The Development Of A Viscoelastic Ellipsoidal Model For Use In Measuring Plantar Tissue Material Properties During Walking, Jessica Lee Deberardinis

UNLV Theses, Dissertations, Professional Papers, and Capstones

Introduction: The mechanical characteristics of the plantar tissues during walking is not well understood as most of the current research focuses on testing specific plantar regions in cadavers or while the feet of the participants are raised. In this work, it is hypothesized that a viscoelastic geometric ellipsoid model used to assess multiple structures of the foot would be accurate and robust. This model would be participant-specific and applicable to the entire stance phase of gait.

Methods: The proposed viscoelastic ellipsoid model would represent several key anatomical areas: Heel, Posterior Midfoot, Anterior Midfoot, Metatarsals 1-2, Metatarsals 3-5, Toe 1, Toe …