Engineering Science and Materials Commons^™

Green Roofs For Grey Water Treatment – Comparative Study Of Economic And Environmental Impacts, Shaden S. Attia

Theses and Dissertations

Cities are under more pressure than ever to use sustainable methods for managing water and other resources because of urbanization, climate change, and a lack of water. Standard greywater treatment systems (SGTSs) work well, but they use a lot of resources and don't provide a lot of ecosystem services. Greywater-treating green roofs (GTGRs) have emerged as a promising Nature-Based Solution (NBS), combining wastewater recycling with benefits like regulating temperature, reducing greenhouse gas (GHG) emissions, and reducing the urban heat island (UHI) effect. Even with this potential, there is still not enough real-world research on how GTGRs affect both the economy …

Fly Ash Proppant Developed For Hydraulic Fracturing, Raz Rzgar Haydar

Theses and Dissertations

Proppants are critical components in hydraulic fracturing, used to maintain fracture conductivity and enhance reservoir stimulation. In high-pressure and harsh reservoir environments, the use of high-strength proppants is essential to ensure well performance. Conventional proppants, being sand, ceramic, and sintered bauxite can be expensive, and their use often requires costly fracture fluids. This study investigates the possibility of utalizing fly ash geopolymers as a sustainable alternative that is also cost-effective for proppants manufacturing. Fly ash, a by-product from the combustion of coal and other materials, was explored as a base material for proppants, utilizing an alkaline solution as an activator …

Functional Biopolymers Applied To Sustainable Technologies In The Environment And Healthcare, Fengjie He

UNLV Theses, Dissertations, Professional Papers, and Capstones

Biodegradable polymeric materials (biopolymers) are naturally derived materials known for their excellent biocompatibility, biodegradability, sustainability, and versatile chemical functionality. They have attracted increasing attention in various applications as alternative to synthetic materials ranging from food packaging to tissue engineering. Meanwhile, with intrinsic advantages, biopolymers have also emerged as promising materials in addressing contemporary challenges in both biomedical and environmental fields. Motivated by the significant potential of biopolymers and the growing need for sustainable materials, my research focuses on the design and engineering of biodegradable polymers with novel modification methods and application directions. In this work, two representative biopolymers are selected: …

Investing Hysteresis In Floodplain Dynamics Of Lakes In The Middle St. Johns River Using Sentinel-1 Sar Imagery, Keenan Hubbard

Doctoral Dissertations and Master's Theses

Floodplain dynamics are often complex, with hysteresis potentially affecting the temporal relationship between flood stage and flood extent during subsequent inundation phases. This study leverages Sentinel-1 synthetic aperture radar (SAR) imagery to map flood extent in the Middle St. Johns River Lake floodplains and examine the presence of hysteresis during flood events. SAR scenes corresponding to river gauge readings were analyzed from the rising and falling limbs of a flood hydrograph. By comparing these flood maps, we assess differences in inundated areas at equivalent water levels during each stage of the flood event. The findings aim to enhance flood monitoring …

Evaluation Of Practical Methods To Determine If A Karst Creek Is Gaining Or Losing: Case Study Of Leith Creek, Elizabeth Jones

Graduate Theses/Dissertations

Karst landscapes are abundant in Missouri, with features such as caves, springs, and sinkholes that form through the dissolution of limestone. Leith Creek is a small stream in Polk County, Missouri fed by two springs and the shallow unconfined Springfield Plateau aquifer, a highly karstified aquifer which is made up of limestone and minor interbedded shale-mudstone units. To determine if Leith Creek is gaining or losing, stream flow, water chemistry and temperature sensors were monitored. Stream flow results required multiple visits to take measurements while temperature sensors required two visits, one to install the dataloggers and another to remove the …

Microwave Catalysis-Enabled Membrane Processes For Microbial Inactivation, Fangzhou Liu

Dissertations

The COVID-19 pandemic has highlighted the urgent need for advanced technologies to combat virus transmission. Traditional membrane filtration technologies primarily serve as physical barriers, capturing pollutants but failing to inactivate microbial agents such as bacteria and viruses. These membranes typically target larger particles but are ineffective against sub-micrometer viral particles. Thus, there's a critical demand for membrane filtration processes that combine robust filtration with antifouling and reaction -enabled functions for efficient pathogen disinfection. This research explores a novel microwave-assisted membrane filtration process incorporating catalytic reactions to enhance microbial disinfection and prevent membrane fouling, offering a groundbreaking solution to global challenges …

Investigating The Impact Of Secondary Activation Time On The Adsorption Properties Of Activated Biochar For Arsenic Removal From Wastewater, Achyuth Bharadwaj Rayarao

Graduate Theses and Dissertations (2019 - present)

Biochar, a naturally occurring and renewable carbon material, becomes porous through activation. Activated biochar is an ideal candidate for use as an adsorbent. The objective of this study is to investigate whether activated biochar derived from Colorado soft pine serves as a better adsorbent and demonstrates enhanced adsorption capabilities after undergoing secondary physical activation at various activation times. The effect of secondary action time on physical adsorption properties drawn from the analysis of isotherm plots, surface areas and pore size patterns were examined by using a physisorption analyzer. Chemical structures were identified using both ultimate and proximate analyses, while porosity …

Properties Of Portland Cement Concrete Incorporating Basalt-Based Pozzolanic Cement, Rana Khalil

Theses and Dissertations

Over the last decade, the world's population has increased dramatically. Due to this growth, the demand for concrete and Portland cement, in return, have increased. Manufacturing of Portland cement is an energy-intensive process that, alone, contributes to about 8% of global CO2. For decades, efforts have been exerted to reduce the harmful environmental impacts of Portland cement by reducing its use in concrete as well as considering alternate binders that may fully or partially replace it. This study aims to assess the properties of concrete incorporating a novel basalt-based pozzolanic cement. To meet this objective, four sets of concrete mixtures …

Developing An Assessment Model For Entrepreneurship Ecosystems Using Hierarchical Decision Model, Mustafa Almuzel, Tugrul U. Daim, Birol Yesilada, Marina Dabic, Gulin Idil Bolatan

Engineering and Technology Management Faculty Publications and Presentations

Entrepreneurship is a crucial driver of economic growth, necessitating the development of effective entrepreneurial ecosystems. However, there are significant gaps in the literature regarding the structured assessment of these ecosystems. This study addresses three main research gaps: the lack of structured evaluation methods, the need for a comprehensive analysis of ecosystem challenges from various perspectives, and the identification of critical factors essential for ecosystem growth. To bridge these gaps, the research introduces the Hierarchical Decision Model (HDM) as a universal assessment framework that can be adapted to different cities for creating effective entrepreneurial environments. The research methodology involved formulating perspectives …

Reducing Food Scarcity: The Benefits Of Urban Farming, S.A. Claudell, Emilio Mejia

Journal of Nonprofit Innovation

Urban farming can enhance the lives of communities and help reduce food scarcity. This paper presents a conceptual prototype of an efficient urban farming community that can be scaled for a single apartment building or an entire community across all global geoeconomics regions, including densely populated cities and rural, developing towns and communities. When deployed in coordination with smart crop choices, local farm support, and efficient transportation then the result isn’t just sustainability, but also increasing fresh produce accessibility, optimizing nutritional value, eliminating the use of ‘forever chemicals’, reducing transportation costs, and fostering global environmental benefits.

Imagine Doris, who is …

Engineered Biomass-Derived Carbon Adsorbents For Targeted Contaminant Remediation From Aqueous Environments, Suraj Venkat Pochampally

UNLV Theses, Dissertations, Professional Papers, and Capstones

Porous carbon adsorbents like biochar (BC) are produced from waste biomasses like wood chips, animal litter, nut shells, dried grass, etc. to be used in a multitude of applications like gas capture, soil amendment, water treatment, electrode materials, etc. In water treatment, carbon-based adsorbents have been mainly used to physically or chemically adsorb contaminants depending on the adsorption mechanism. However, BCs in their raw state do not have the capability of absorbing high amounts of contaminants and need to be activated/ modified for the pore network to broaden and adsorb the contaminants with better efficiency.

The scope of this dissertation …

Augmenting External Surface Pressures’ Predictions On Isolated Low-Rise Buildings Using Cfd Simulations, Md Faiaz Khaled, Aly Mousaad Aly

Faculty Publications

The aim of this paper is to enhance the accuracy of predicting time-averaged external surface pressures on low-rise buildings by utilizing Computational Fluid Dynamics (CFD) simulations. To achieve this, benchmark studies of the Silsoe cube and the Texas Tech University (TTU) experimental building are employed for comparison with simulation results. The paper is structured into three main sections. In the initial part, an appropriate domain size is selected based on the precision of mean pressure coefficients on the windward face of the cube, utilizing Reynolds Averaged Navier-Stokes (RANS) turbulence models. Subsequently, recommendations regarding the optimal computational domain size for an …

Methods And Surface Materials Repair For Concrete Structures – A Review, Lelian W. Elkhatib, Adel Elkordi, Jamal Khatib

BAU Journal - Science and Technology

Concrete is a very critical material that may require maintenance and possible repair periodically, especially in important structure such as bridges. In general, concrete in structures (e.g. reinforced concrete) may be subjected to cracks due to a variety of reasons. These include, design and external environments such as the ingress of harmful ions into the concrete, unexpected extra loads including earthquakes. These cracks can affect not only the appearance of the structure but more importantly the structural performance of concrete and the integrity of the concrete structure. Therefore, when cracks occur a proper repair method should be selected, based on …

Recent Developments In Timber Design & Its Impact On Carbon Emissions, Raquel Jackson

Spectra Undergraduate Research Journal

This paper explores recent developments in timber building designs and its potential towards reducing carbon emissions. Carbon dioxide emissions are a growing issue worldwide as urbanization and industrialization continues to increase. The rising concentration of carbon dioxide emissions pose significant concerns towards public welfare and environmental health. Despite current methods to reduce greenhouse gasses, carbon emissions remain difficult to reduce from steel and concrete industries. Increasing timber use in building design is a possible solution. Increasing more timber in building design can help reduce carbon emissions due to the carbon-absorbing properties of the construction material. Timber as a construction material …

Integrating Steel Slag Aggregates Into Asphalt Paving By Harmonizing Availability, Quality, Economics, And The Environment, Timothy R. Murphy

Theses and Dissertations

This thesis provides guidance on how to balance matters related to the environmental stewardship, market sources, origin and uses, material properties, performance, and economic impact of using slag materials in pavements. The literature on this topic provides numerous references on the use of slag materials for specific applications, and this thesis aims to make use of those references along with other data from the author to describe slag materials from a holistic perspective and provide some suggestions for balancing several factors that impact optimal use of this resource within pavement structures. Discussion is given to the increased importance of recycling …

Survey Data: Optimising Retrofitted Insulation For Irish Residential Building Walls, Rakshit D. Muddu, Aimee Byrne, Anthony Robinson Dr.

Datasets

A survey was conducted to determine the preferred set point temperature and heating pattern among Irish households. The survey was sent to 237 people living across Ireland, out of which 32 respondents skipped the survey and 9 surveys were found to be incomplete. Amongst the counties in Ireland 71.1% respondents were from Dublin, 6.34% from Kildare, 5% from Meath, 5% from Wicklow and in all the remaining counties response rate was below 2%. Part 1: This section of the survey recorded information regarding characteristics of the building such as house type, wall type, insulation type, period the house was built. …

Fem Eem Dataset: Optimising Retrofitted Insulation For Irish Residential Building Walls, Rakshit D. Muddu, Aimee Byrne, Anthony Robinson Dr.

Datasets

A large number of combinations of Irish wall types, insulation materials, and heating fuel types were produced to compare the multiple variables which influence Optimal Insulation Thickness values. The total cost (TC) and carbon emission (CE) at optimum insulation thickness (OIT) for all combinations of insulation material and three types of fuel are considered. The dataset presents OIT for solid wall, cavity wall and cavity block wall types located in Monaghan, Dublin, and Kerry.

Hdd Dataset: Optimising Retrofitted Insulation For Irish Residential Building Walls, Rakshit D. Muddu, Aimee Byrne, Anthony James Robinson

Datasets

In this study, a thermal-economic analysis was conducted to determine the optimum insulation thickness of retrofitted insulation walls in different regions in Ireland. This was based on the Heating Degree Day method (HDD). This dataset contains optimum insulation thickness, payback period, cost savings and carbon emission for all 25 counties in the Republic of Ireland

Sulfonated Styrene Grafted Sebs/Abs Made By Additive Manufacturing For Ion Exchange Applications, Avianna Elaine Gallegos

Open Access Theses & Dissertations

An interpenetrating polymer network (IPN) for cation exchange applications was synthesized from a blend of styrene-ethylene/butylene-styrene (SEBS) and acrylonitrile butadiene styrene (ABS), which was 3D printed, grafted with crosslinked polystyrene (PS), and sulfonated. A method for styrene grafting was applied to reduce the damage to polymer phases caused by the sulfonation reaction. Styrene and divinylbenzene monomers were introduced to the IPN and induced with heat treatment to polymerize in situ. The graft copolymerization reaction was enhanced with varying quantities of benzoyl peroxide as a chemical initiator. The samples were subsequently sulfonated with chlorosulfonic acid in dichloroethane and functionalized for ion …

Minimizing Surface Run-Off, Improving Underground Water Recharging, And On-Site Rain Harvesting In The Kathmandu Valley, Ambika P. Adhikari, Keshav Bhattarai

Himalayan Research Papers Archive

Nepal's political institutions and administrative units were thoroughly restructured in 2015 with the promulgation of the new Constitution. Several rural areas were combined to meet the definition of urban threshold criteria to classify rural areas into urban categories. Accordingly, over 3,900 local political and administrative units were amalgamated into 753 units, of which, 293 units are classified as urban. Within these newly defined urban areas, many natural environments have been converted into impervious surfaces such as paved roads, sidewalks, and building roofs. These impervious surfaces have drastically increased the amount of surface run-offs-often termed as "urban floods"--under increasing precipitation caused …

The Generation And Transport Of Charged Aerosols: Fundamental Study And Applications In Medicine And Energy Conversion, Hao Zhou

McKelvey School of Engineering Graduate Student Theses & Dissertations

Charged aerosols have significant implications in the field of functional material synthesis, pharmaceutical coating, and drug delivery. Electrospray systems are an effective methodology for generating highly charged monodispersed droplets in the size range from nanometer to micrometer. The prediction of surface charge, size and morphology of nanoparticles resulting from charged droplets are highly required for the precise control of nanoparticle properties and their effective utilization. However, the evolution of charged droplet is not well understood due to the existence of coulombic fission and ion evaporation processes. Thus, the goal of this dissertation is to elucidate how the precursor properties and …

Mathematical Model Of The Efficiency Of Investments Aimed In The Implementation Of Water-Saving Technologies

Irrigation and Melioration

In Uzbekistan, research work is being carried out aimed at improving the economic mechanisms for the introduction of water-saving technologies for irrigating agricultural crops. At the same time, the issues related to the analysis of the effectiveness of the use of water-saving technologies when irrigating cotton, the development of mathematical methods for assessing the effectiveness of investments, as well as their introduction into practice have not been sufficiently studied. This article provides a mathematical model of the efficiency of investments aimed at introducing water-saving technologies. The results of a numerical experiment of a mathematical model show that the introduction of …

Efficient Use Of Water Resources In The Basins Of Small Rivers, F. Gapparov, M.F. Gafforova

Irrigation and Melioration

The article provides a recommendation for the efficient use of water resources in the basins of small foothill rivers. The research was carried out on the example of the Govasay river basin located in the northern part of the Fergana Valley. The efficiency factor of the canal has been determined and a technical assessment has been given for the management of water resources in the river basin; the efficiency of the canal is 65-75%. A program for the operational management of water resources in The Govasay river basin and a GIS map of water consumers in the Govasay river basin …

Model Of Groundwater Level Control Using Horizontal Drainage, A. Arifjanov, M. Otaxonov, Z. Abdulkhaev

Irrigation and Melioration

The article describes the main factors affecting the rise in the level of groundwater in the city of Fergana and ways to eliminate them. Currently, in order to reduce the negative impact of rising groundwater levels on the environment, crops, buildings and structures, as well as underground utilities, it is proposed to design horizontal drainage in urban areas and a mathematical model has been developed for changing the groundwater level. For this, long-term data from observation wells were analyzed and the hydraulic parameters of horizontal drainage were selected taking into account the hydrogeology of the area. Taking into account the …

Results Of Proximate Analysis Of Energy Use Of Municipal Solid Waste, N.N. Abduganiev

Irrigation and Melioration

In the modern industrialized world, various raw materials are processed and used for human consumption. While some of the raw materials are converted into the desired product, the rest is thrown into the environment as waste. It is known that solid waste is a type of biomass that is formed in the course of human life. The article presents the results of a preliminary analysis of studies on the use of solid waste energy in the Urta-Chirchik district of the Tashkent region. Sorting results showed that the total volume of municipal solid waste in the district consists mainly of wood …

Shredding Of Cotton Stalks Under The Action Of Toothpicks In A Combined Unit, B. Khudayarov, U. Kuziev, B. Sarimsakov, М. Kholbutaev

Irrigation and Melioration

The article presents materials devoted to the justification of the parameters of the crown-wheel of the combined aggreagate. The technological process of work and the design of the working part, which is crushed by crushing cotton stalks, without breaking them, laying them on the movement of the unit, has been substantiated and developed. The optimal parameters of the crown-wheel and the tooth are determined by solving the regression equations that determine the optimal values of the vertical load on the teeth and its working quality. The results of theoretical and experimental research show that the amount of crushing of cotton …

Influence Of Electrophysical Methods On The Processes Of Root Formation Of Grapes, N.M. Markayev

Irrigation and Melioration

The article describes the possibilities of electrophysical processing before planting cuttings during vegetative cultivation of grape seedlings. The processes of root formation in cuttings using the electrophysical method in the article Acceleration of the process of root formation in cuttings of black raisins, treated at 71 V/m and an electric field strength of 15 hours, and an increase in the viability, quality, growth and survival of rooted seedlings up to 16.67-34% Presented the results of experiments on the increase and methods of electrotechnological processing of grape cuttings. The result of the study is the analysis and results of the processes …

Conditions, Criteria And Principles For Creating An Agri-Cultural Land Market In Uzbekistan, A.R. Nurnazarov

Irrigation and Melioration

The article analyzes the prerequisites for creating a market for agricultural land in the Republic of Uzbekistan, special attention is paid to land reform, land degradation (reduction of the bonitet score from 60 in 1991 to 50 or more at present, pasture degradation by 20-30%) and increase in economic from their use, the role of land rent in payments for land. 6 basic principles for creating a land market have been established and systematized, the relationship between X-rays and water in the irrigated farming zone, the role of the market in increasing the efficiency and effectiveness of the use of …

Economic Assessment Of The Effect Of Family Income On Students' Disciplines, Sh.A. Muratov

Irrigation and Melioration

The importance of higher education in scientific research, its role in poverty reduction and population growth has been studied theoretically. Also, when using the data of social surveys conducted by 538 respondents (students) studying in higher education institutions, they were awarded the Order of the logistics regulator in the economic assessment of the factors influencing the rate of mastery of disciplines. Factors influencing the acquisition of subjects by students: the main income of the family comes from non-farm (69,9 %), sex (52,2 %), studying at a higher education institution on a state grant (108,8 %), the student's course of study …

Innovative Rotor Casing And Leveling Apron For Combined Tillage Machine, A.A. Akhmetov, L.B. Muratov

Irrigation and Melioration

Investigations of the design of a combined machine equipped with an innovative casing and a leveler apron are presented, and the parameters of the leveler apron are substantiated. It was experimentally established that when the height of the drawing prism is exceeded by more than 200 mm, due to the falling of the crumbling part of the soil onto the rotor, the soil is thrown forward in the direction of the machine. Therefore, to eliminate soil waste, it is necessary either to reduce the height of the drag prism, or to increase the distance between the rotor and the leveling …