Engineering Science and Materials Commons^™

Ethanol Electrooxidation On Pt/Mo2/Cnts Catalysts, Yu-Long Cheng, Jie Sun, Ji-Gang Li, Li-Gong Zhang, Tian Zhou, Geng Chang, Zhong-Chao Dong

Journal of Electrochemistry

The ethanol electrooxidation behaviors on Pt/MO₂/CNTs（M=Sn, Ti, Ce）and Pt/CNTs catalysts in H₂SO₄ solutions were researched by cyclic voltammetry. It has revealed that the catalysts with the addition of metal oxides presented higher electrooxidation activity for ethanol, in particular, the Pt/CeO₂/CNTs catalyst showed the best activity for ethanol electrooxidation intermediate. The Pt/SnO₂/CNTs catalyst demonstrated the best ethanol electrooxidation activity when considering the synthetic effects of such parameters as the onset oxidation potential, peak current densities and total oxidation area.

Catalytic Activities Of Electrochemically Dealloyed Pt(Pd)-Cu Catalysts For Oxygen Reduction Reaction, Rui-Zhi Yang, Strasser Peter, Toney Michael

Journal of Electrochemistry

The electrochemically dealloyed Pt(Pd)-Cu catalysts were prepared by electrochemical dealloying of Cu₃Pt(Pd) and their catalytic activities toward oxygen reduction reaction (ORR) were studied in 0.1 mol·L^-1 HClO₄ . solutions. The structural features of the dealloyed Pt(Pd)-Cu were revealed by synchrotron-based anomalous X-ray diffraction (AXRD) and surface X-ray scattering (SXS) at an atomic scale. We established a relationship between the structure and the catalytic activity by comparing the ORR activity and the structure of dealloyed Cu₃Pt nanoparticles with similarly dealloyed Cu₃Pt thin films and Cu₃Pt(111). The enhancement in the activity of …

Electrocatalytic Oxidation Of Ethanol On Ni-P-Tio2 Composite Coating Electrodes, Guang-Hui Hu, Hai-Xia Zeng, Zhi-Gang Wei, Zhan-Chang Pan, Shu-Guang Xie, Yan-Di Zou

Journal of Electrochemistry

The Ni-P-TiO₂ composite coating electrodes with different contents of TiO₂ particulates were prepared by electroless plating technique from Ni-P plating bath containing TiO₂ powders on brass. Cyclic voltammetry, linear sweep voltammetry (LSV), chronoamperometry and electrochemical impedance spectroscopy (EIS) were used to test the electrochemical performance of Ni-P-TiO₂/Cu electrodes. It was indicated that the Ni-P-TiO₂/Cu electrodes exhibited very strong electrocatalytic activity toward the oxidation of ethanol in alkaline medium at ambient temperature. The electrocatalytic activity of ethanol oxidation on the Ni-P-TiO₂ electrodes depended on the amounts of TiO₂ in the coatings. The …

NaXMYFe(Cn)6(M=Fe, Co, Ni): A New Class Of Cathode Materials For Sodium Ion Batteries, Jiang-Feng Qian, Min Zhou, Yu-Liang Cao, Han-Xi Yang

Journal of Electrochemistry

Three types of Prussian blue compounds, Na_xM_yFe(CN)₆ (M = Fe, Co, Ni), were prepared simply by solution precipitation method and tested as cathode materials for sodium-ion batteries. X-ray diffraction and SEM measurements demonstrated that the prepared materials, namely, NaFeFe(CN)₆, Na₂CoFe(CN)₆, and Na₂NiFe(CN)₆, exhibited a perfect cubic structure with a particle size of several tens nanometers. Cyclic voltammetric and galvanostatic cycling tests revealed very different electrochemical behaviors of these three materials. The specific capacities of NaFeFe(CN)₆ and Na₂CoFe(CN)₆ could reach 113 mAh·g …

Preparation And Electrochemical Performance Of Mo-Doped Li3V2(Po4)3/C Cathode Materials, Zhi-Yuan Tang, Wei Yuan, Ji Yan, Wen-Feng Mao, Li Ma

Journal of Electrochemistry

The molybdenum-doped Li₃V_2-xMo_x(PO₄)_3/C (x = 0.01, 0.02 and 0.03) cathode materials were prepared with a sol-gel method by using Li₂CO₃, NH₄H₂PO₄, V₂O₅ and MoO₃ as raw materials, and citric acid as both chelating reagent and carbon source. The X-ray diffraction (XRD) analyses showed that the crystal structure of as-prepared samples is monoclinic with space group P2₁/n. Scanning electron microscopy (SEM) observations indicated the uniform morphology for Li₃Mo_0.02V_1.98(PO₄) …

Synthesis And Electrochemical Properties Of Lifeso4F/Graphene Composite As Cathode Material For Lithium-Ion Batteries, Wei Guo, Ya-Xia Yin, Li-Jun Wan, Yu-Guo Guo

Journal of Electrochemistry

The LiFeSO₄F was successfully synthesized from the reactions of FeSO₄∙xH₂O (x=1, 4, 7) with LiF in tetraethylene glycol media through a facile low temperature method. The structures and microscopic features of the products were characterized by XRD, SEM and TEM. TGA result shows the good thermal stability of the as-prepared LiFeSO₄F. No diffraction peaks of the FeSO₄ are observed in the as-prepared products with the starting material of either FeSO₄∙4H₂O or FeSO₄∙7H₂O, which should be ascribed to delaying the release of H_{2 …}

Corrosion Inhibition Of 316l Steel Using Sodium Diethyl Dithiocarbamate Solution In Simulated Crude Oil, Xiao-Guang Ren, Jie Yang

Journal of Electrochemistry

The corrosion inhibition behaviors of 316L steel using the sodium diethyl dithiocarbamate (SDDTC) compound in the crude simulation solution were studied in the absence and presence of zinc sulfate or sodium chromate with different compositions. Experiment resultss showed that in the environments of highly acidic and high concentrations of chloride ions the SDDTC compound could well inhibit the corrosion of 316L steel. The good synergic effects on the corrosion inhibition of 316L steel by additions of either zinc sulfate or sodium chromate into SDDTC compound were indicated in this study, which is of great significance and importance in practical applications.

Numerical Modeling Of High Temperature Bayonet Heat Exchanger And Decomposer For Decomposition Of Sulfur Trioxide, Vijaisri Nagarajan, Yitung Chen, Tzu-Chen Hung, Qiuwang Wang, Valery Ponyavin

College of Engineering: Graduate Celebration Programs

Motivation

• Hydrogen is an attractive energy carrier in the future energy technology.

• Hydrogen is produced from splitting of water through various process namely electrolysis, photo-electrolysis, photo-biological production and thermochemical water-splitting.

• The aim of this study is to numerically investigate fluid flow, heat transfer and chemical reaction in bayonet high temperature heat exchanger and decomposer.

• Parametric studies are performed to achieve maximum decomposition with less pressure drop.

Cellular Automaton For Simulation Of Oxide Layer Growth Influenced By Chromium Concentration Of Structure Material, Kuan-Che Lan, Yitung Chen, Ge-Ping Yu, Tzu-Chen Hung

College of Engineering: Graduate Celebration Programs

Chromium, an important alloying element, has been added in ferrous and nickel based alloy such as stainless steels and Inconel alloy to improve the corrosion resistance. High corrosion resistance of structural materials in extremely high working temperature is one crucial R&D objective of Gen IV nuclear power plants which propose to raise the thermal efficiency via high working temperature. A cellular automaton (CA) model based on the stochastic approach was proposed to simulate the process of oxidation and corrosion of structural material in flowing fluid. The relation of chromium concentration against oxide layer thickness during a specific period was found. …

Thermal Conductivity Measurement With 3Ω Method Background And Synopsis Of Its Implementation, Fiifi Blankson

College of Engineering: Graduate Celebration Programs

ABSTRACT

Continued advances in nanostructured materials have made it necessary to develop materials with specific thermoelectric properties. The 3ω Method provides an accurate measurement of one such property, thermal conductivity. It will be used in this research to find high electrical conductivity alloys with low thermal conductivity.

Acoustic Emission Detection Of Metals And Alloys During Machining Operations, Jameson K. Nelson

Purdue Polytechnic Masters Theses

Nelson, Jameson K. M.S., Purdue University, May 2012. Acoustic Emission Detection of Metals and Alloys During Machining Operations. Major Professor: Rodney G. Handy.

Practical correlation between material deformation attributes and theoretical concepts of machining has proven difficult to attain. The purpose of this study was to further explore trends and relationships using acoustic emission detection of materials undergoing single-point lathe turning machine processes. The majority of machining experiments that incorporate acoustic emissions focuses on tool degradation for the purposes of optimizing consumables required to manufacture mechanical devices. Experiments were implemented varying recording location, mechanical barrier condition, and machine parameters. The …

Model-Based Systems And Methods For Analyzing And Predicting Outcomes Of Vascular Interventions And Reconstructions, Yuris A. Dzenis, Alexey Kamenskiy, Iraklis I. Pipinos, Jason N. Mactaggart

Department of Mechanical and Materials Engineering: Faculty Publications

Systems and methods for analyzing and predicting treatment outcomes of medical procedures such as vascular interventions and reconstructions are disclosed. An illustrative system for analyzing and predicting therapeutic outcomes of medical procedures comprises a relational database configured for classifying and storing patient specific input data for multiple patients, a fluid-solid interaction biomechanical model configured for performing a biomechanics simulation and generating biomechanics data, and a graphical user interface.

Peridynamic Model For Dynamic Fracture In Unidirectional Fiber-Reinforced Composites, Wenke Hu, Youn Doh Ha, Florin Bobaru

Department of Mechanical and Materials Engineering: Faculty Publications

We propose a computational method for a homogenized peridynamics description of fiber-reinforced composites and we use it to simulate dynamic brittle fracture and damage in these materials. With this model we analyze the dynamic effects induced by different types of dynamic loading on the fracture and damage behavior of unidirectional fiber-reinforced composites. In contrast to the results expected from quasi-static loading, the simulations show that dynamic conditions can lead to co-existence of and transitions between fracture modes; matrix shattering can happen before a splitting crack propagates. We observe matrix–fiber splitting fracture, matrix cracking, and crack migration in the matrix, including …

A High Bandwidth Non-Destructive Method For Characterizing Simple Media, Matthew L. Szuster

Theses and Dissertations

The relative complex permittivity can be extracted with time domain data from a perfect electrical conductor (PEC) backed sample of a low-loss, non-dispersive dielectric using dual ridged waveguide aperture probes with attached PEC flange plates of the same geometry and different dimensions. The temporal domain measurement of interest is the ability to detect the reflection from the edge of the flange plate in the parallel region created by the flange plate and the PEC backing on the dielectric sample. Signal processing windows are applied to the data in order to exploit this edge reflection. The types of signal processing methods …

Silicon Carbide Capacitive High Temperature Mems Strain Transducer, Richard P. Weisenberger

Theses and Dissertations

Air Force Research Lab Air Vehicles directorate performs research on hypersonic vehicles. To verify materials or designs of hypersonic vehicles, they have a need to measure strain at temperatures exceeding 700°C. Strain sensors have the ability to measure strain. Strain is the deformation of materials due to internal stresses in a material. Internal stresses occur when a material is subjected to a force. Traditional strain sensors use Piezoresistive effects to measure strain, which is temperature dependent and making them unusable at high temperatures. This paper discusses a novel strain sensing device, sensing capacitance instead of piezoresistance. The strain sensor is …

High Speed Friction Stir Spot Welding On Dp 980 Steel:Joint Properties And Tool Wear, Nathan David Saunders

Theses and Dissertations

With the desire to improve passenger safety and fuel efficiency, Ultra High Strength Steels (UHSS) have been developed for use in the automotive industry. UHSS are high strength steels with high ductility and strength. DP 980 is one of these UHSS being applied in automobile manufacturing. DP 980 is difficult to join with Resistance Spot Welding (RSW) because of the high carbon content and alloying in this material. The weld becomes brittle when it solidifies during the welding process. With the desire and motivation of widely using UHSS, new welding processes are needed to be developed in order to effectively …

Me-Em Enewsbrief, March 2012, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Preparation And Electrochemical Performance Of Lifepo4/C By Spray Drying Method Assisted With Organic Template, Quan-Bing Liu, Yang-Mei Jiang, Hui-Yu Song, Shi-Jun Liao

Journal of Electrochemistry

In this work, the LiFePO₄/C composites were prepared by the spray drying and carbothermal method, and were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and galvanostatic charge-discharge measurements. The effects of the organic assisted templates on the morphologies and electrochemical properties of the LiFePO₄/C composites were investigated. The results showed that the morphology and microstructure of the composites could be tuned by incorporating with the different templates. The morphology of the composite appeared to be solid microspheres if no organic template was added, while porous microspheres, nest-like …

Synthesis And Electrochemical Performance Of Xlifepo4·Yli3V2(Po4)3 Composites, Ping-Ping Ma, Zhi-Jian Liu, Jian-Hua Xia, Yu Chen, Pu Hu, Zhi-Chao Lu, Ding-Guo Xia

Journal of Electrochemistry

A series of xLiFePO₄·yLi₃V₂(PO₄)₃ composites were systematically synthesized through solid state reactions by variations in the proportions of LiFePO₄ and Li₃V₂(PO₄)₃. The properties of the prepared compounds were investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM) and electrochemical measurements. The capacity of 162.7 mAh/g at 0.2 C rate was obtained with the relatively good cycle stability and good conductivity for 0.95LiFePO₄·0.05Li₃V₂(PO₄)₃ due to more uniformed distributed and smaller particle sizes.

Preparation And Characterization Of Mno/Tin Anode For Lithium Ion Batteries, Gao-Jie Xu, Hai-Yan Yang, Peng-Xian Han, Li-Xue Zhang, Ke-Jun Zhang, Chuan-Jian Zhang, Yu-Hua Fan, Cai-Feng Bi, Guang-Lei Cui

Journal of Electrochemistry

Manganese titanate (MnTiO₃) powder was prepared via a sol-gel method using manganese acetate and tetrabutyl titanate as raw materials, and citric acid as a chelating agent. Through high temperature nitridation of MnTiO₃ powder in ammonia, the MnO/TiN composite was obtained. The phase structure, composition and morphology of the composites were characterized by XRD, SEM and EDS. The electrochemical properties of the composite electrodes were studied by performing cyclic voltammetry, galvanostatic charge and discharge, and electrochemical impedance spectroscopy tests. The MnO/TiN electrode delivered specific capacities of 394 mAh·g^-1 and 146 mAh·g^-1 at the current density of …

Preparation And Hydrogen Evolution Properties Of Ni/Ag2O/Ruo2-Pt Cathodes, Shu Huang, Xue-Ming Li, Wu-Lin Li, Wen Wang

Journal of Electrochemistry

The Ni/Ag₂O/RuO₂-Pt composite cathode was prepared by sol-gel method using RuCl₃ and H₂PtCl₆ as raw materials. The effects of heat treatment conditions and AgNO₃ concentrations on hydrogen evolution properties were investigated. The morphology and composition of Ni/Ag₂O/RuO₂-Pt composite cathode have been characterized by XRD, XPS and SEM-EDS. It is demonstrated that the surface structure of Ni/Ag₂O/RuO₂-Pt composite cathode is more compact, with fewer cracks and larger surface roughness than pure nickel. At the conditions of 0.3 A·cm^-2, 90 ^oC, and …

Progress And Perspective Of Fuel Cell Technology, Ming Hou, Bao-Lian Yi

Journal of Electrochemistry

Fuel cell, a clean and high-efficiency electrochemical power source, has being paid much attention worldwide recent years. In this paper, the progress and perspective of fuel cell technology are elucidated in detail. Fuel cells have been applied in some special fields such as spacecraft, shuttle and submarines. However, in the areas of transportation, stationary station and portable power source, fuel cells are still under demonstration due to the durability and cost problems. The reliability and surrounding survivability of fuel cells should be enhanced in the special application. Meanwhile, the durability and cost of fuel cells are the main issues to …

The Electrocatalytic Study Of Licoo2 In Air Electrode For Lithium-Air, Jun Gao, Wei Wu, Yan-Yan Tian, Yong Yang

Journal of Electrochemistry

The LiCoO₂ has been investigated as a new electrocatalyst for air electrodes using homemade lithium-air battery. The electrochemical performance and structural changes of the LiCoO₂ based composite air electrodes have been studied. The results of CV, XRD and charge-discharge tests show that the composite air electrodes composed of LiCoO₂ can greatly improve the discharge performance of lithium-air batteries. In particular when the composite air electrodes are charged to 4.1 V before further discharging, the obvious catalytic effects of LiCoO₂ are attributed to higher valence state of the Co element in LiCoO₂, esp. at charged …

Dissolved Oxygen Seawater Battery With Electrochemical Capacitance, Hai-Bo Xu, Yong-Hong Lu, Wei Zhang, Yan-Ting Yu, Chuan-Wei Yan, Ya-Ping Sun, Lian Zhong, Jian-Guo Liu, Yi Zheng, Bing Han, Yong-Liang Wang

Journal of Electrochemistry

A new concept of seawater battery with electrochemical capacitance (SWB-EC) has been proposed using carbon fibre brush (CFB) as the cathode material, and three testing prototypes have been made accordingly. The discharge performances of the CFB before- and after-oxidation and Mg alloy sacrifice anode were studied by cyclic voltammetry and constant current discharge tests under steady state conditions. Results show that the oxidized CFB exhibits the pseudo-capacitive characteristic and its activity of oxygen reduction reaction (ORR) in stirred seawater highly increases, comparing with the non-oxidized CFB. The open circuit potential of Mg alloy sacrifice anode is -1.74 V, having the …

Simultaneous Determinations Of Ascorbic Acid, Dopamine And Uric Acid At Ca/Gc Electrode, Ying Zhang, Wang Ren, Min-Jiao Li

Journal of Electrochemistry

The citric acid modified glassy carbon electrode (CA/GC) was constructed by potentiostatic technique and used for simultaneous determinations of ascorbic acid (AA), dopamine (DA) and uric acid (UA) by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The CA/GC electrode exhibits excellent electrocatalytic activity towards AA, DA and UA. The oxidation peaks are well separated with the potential differences between AA and DA, DA and UA, and AA and UA being 170, 130 and 300 mV, respectively, which is large enough to determine AA, DA and UA simultaneously. The catalytic peak currents obtained were linearly dependent on the concentrations of …

Cycle Lifetime Investigation Of Nickel Electrode Prepared By Electrochemical Impregnation For Applications In Aerospace Nickel Hydrogen Cells, Hai-Chang Zhang, Li-Xin Tan, Cheng Guo, Wen-Cheng Ming, Xue-Ying Ren

Journal of Electrochemistry

In this paper, the effects of overcharge, charge-discharge C rate and pore size on cycle lifetime of 4.5’ electrochemical impregnated nickel electrode were investigated. In the case of the electrode was overcharged to 170% of nominal capacity, the initial capacity of the electrode could be maintained 2.7 Ah up to 150 cycles without deterioration and a discharge capacity of 1.7 Ah (remaining 63% of 2.7 Ah) could be delivered after 300 cycles. Without overcharge, more than 300 charge-discharge cycles could be realized without loss of capacity and a discharge capacity of electrode could be maintained about 76% of initial capacity …

Effects Of Mismatched Electrodes On An At-Cut Quartz Resonator, Huijing He, Jinxi Liu, Jiashi Yang

Department of Mechanical and Materials Engineering: Faculty Publications

We study thickness-shear and thickness-twist free vibrations of a finite AT-cut quartz resonator with mismatched electrodes. The equations of anisotropic elasticity are used with the omission of the small elastic constant c56. An analytical solution is obtained using Fourier series from which the resonant frequencies, mode shapes, and vibration confinement resulting from the electrode inertia are calculated and examined.

Generalized Ellipsometry In-Situ Quantification Of Organic Adsorbate Attachment Within Slanted Columnar Thin Films, Keith B. Rodenhausen Jr., Daniel Schmidt, Tadas Kasputis, Angela K. Pannier, Eva Schubert, Mathias Schubert

Department of Chemical and Biomolecular Engineering: Faculty Publications

We apply generalized ellipsometry, well-known to be sensitive to the optical properties of anisotropic materials, to determine the amount of fibronectin protein that adsorbs onto a Ti slanted columnar thin film from solution. We find that the anisotropic optical properties of the thin film change upon organic adsorption. An optical model for ellipsometry data analysis incorporates an anisotropic Bruggeman effective medium approximation. We find that differences in experimental data from before and after fibronectin adsorption can be solely attributable to the uptake of fibronectin within the slanted columnar thin film. Simultaneous, in-situ generalized ellipsometry and quartz crystal microbalance measurements show …

On The Stability Of A Microstructure Model, Mihhail Berezovski, Arkadi Berezovski

Publications

Abstract

The asymptotic stability of solutions of the Mindlin-type microstructure model for solids is analyzed in the paper. It is shown that short waves are asymptotically stable even in the case of a weakly non-convex free energy dependence on microdeformation.

Research highlights

The Mindlin-type microstructure model cannot describe properly short wave propagation in laminates. A modified Mindlin-type microstructure model with weakly non-convex free energy resolves this discrepancy. It is shown that the improved model with weakly non-convex free energy is asymptotically stable for short waves.

Effect Of External Electric Field On Hydrogen Adsorption Over Activated Carbon Separated By Dielectric Materials, Zheng Zhang

Dissertations, Master's Theses and Master's Reports - Open

Energy crisis and worldwide environmental problem make hydrogen a prospective energy carrier. However, storage and transportation of hydrogen in large quantities at small volume is currently not practical. Lots of materials and devices have been developed for storage hydrogen, but to today none is able to meet the DOE targets.

Activated carbon has been found to be a good hydrogen adsorbent due to its high surface area. However, the weak van der Waals force between hydrogen and the adsorbent has limited the adsorption capacity. Previous studies have found that enhanced adsorption can be obtained with applied electric field. Stronger interaction …