Engineering Science and Materials Commons^™

The Investigation Of Valve Operators' Torque Production Capabilities And Optimal Handwheel Height, Angle, And Opening Technique, Saif K. Al-Qaisi

LSU Doctoral Dissertations

This research consists of two projects concerned with handwheel-valve operations. The objectives of poject-1 were to: (1) introduce an ergonomically-modified valve-wrench and compare it to conventional valve-opening methods, in terms of efficiency (time to open valve), perceived physical exertion (Borg-scale), and muscle loading of shoulder and trunk muscles; and (2) determine whether the torque setting (15 Nm and 30 Nm) of the valve affects the preferred valve-opening method. Four methods were evaluated, including using bare hands (BH), conventional wrench-restricted (CW-R, assumes presence of obstructions), conventional wrench-unrestricted (CW-U, assumes no obstructions), and modified wrench (MW). Electromyography (EMG) activities were measured from …

Variability And Characteristics Of Recycled Asphalt Shingles Sampled From Different Sources, Aaron Lodge

LSU Master's Theses

Recent literature studies have demonstrated depletion in natural resources; therefore, making resources needed for the pavement industry is more costly. There is a need to minimize cost and to try to reduce the depletion of natural resources. While the recycling of asphalt shingles is beneficial in reducing the consumption of virgin materials, pavement performance should not be compromised. One major concern with recycled asphalt shingles (RAS) relates to the variability in the properties of the recycled materials originating from different sources. In addition, the rheological properties of RAS have not been evaluated as well as its influence on the virgin …

Optimal Consignment Stocking Policies For A Supply Chain Under Different System Constraints, Hui Zhi Yi

LSU Doctoral Dissertations

The research aims are to enable the decision maker of an integrated vendor-buyer system under Consignment Stock (CS) policy to make the optimal/sub-optimal production/replenishment decisions when some general and realistic critical factors are considered. In the system, the vendor produces one product at a finite rate and ships the outputs by a number of equal-sized lots within a production cycle. Under a long-term CS agreement, the vendor maintains a certain inventory level at the buyer’s warehouse, and the buyer compensates the vendor only for the consumed products. The holding cost consists of a storage component and a financial component. Moreover, …

Silver Nanoparticles As Drug Delivery Systems, Ammar Tahseen Qureshi

LSU Doctoral Dissertations

The goal of this project is to study the potential applications of silver nanoparticles (SNPs) in the medical device and pharmaceutical industries. Bone cements have been used in the orthopedic surgeries for many years to anchor prosthetics while filling up the spaces between the prostheses and bone. Antibiotics are an active component of bone cements but the increasing bacterial resistance to these antibiotics and difficulty of shaping and molding the bone cements increases the need for new antimicrobial biomaterials. Adult stem cell based regenerative therapies have been one of the most widely researched areas of tissue engineering. This is due …

A Metaheuristic-Based Simulation Optimization Framework For Supply Chain Inventory Management Under Uncertainty, Qinglin Duan

LSU Doctoral Dissertations

The need for inventory control models for practical real-world applications is growing with the global expansion of supply chains. The widely used traditional optimization procedures usually require an explicit mathematical model formulated based on some assumptions. The validity of such models and approaches for real world applications depend greatly upon whether the assumptions made match closely with the reality. The use of meta-heuristics, as opposed to a traditional method, does not require such assumptions and has allowed more realistic modeling of the inventory control system and its solution. In this dissertation, a metaheuristic-based simulation optimization framework is developed for supply …

Optimizing Light Requirements And Dilution Rates For Maximizing Algal Cell Growth And Lipid Content For Biofuel Feedstock Production, Beatrice Gabriela Terigar

LSU Doctoral Dissertations

There is a rapidly growing interest in the potential of microalgae as feedstock for the next generation of biofuels. The current study was designed to meet the following objectives: (1) Investigate the interdependence among cell density, biomass and lipid productivity to maximize feedstock production from outdoor cultures; (2) Investigate the effect of cycling high-intensity lights to identify optimum Dark:Light (D/L) ratios, which can be effectively used by researchers to maximize aerial biomass productivities; (3) Develop a deterministic model to simulate the biomass productivity in an continuous-flow bioreactor at various hydraulic retention times. Results indicated that variation in HRTs has a …

Microstructure And Physics-Based Structural Models For Suspended Clay-Exopolymer Flocs, Xiaoling Tan

LSU Doctoral Dissertations

Costal or shoreline waters are often characterized by high concentrations of suspended cohesive sediments (or clay) affected by varied organic matters (mostly extracellular polymeric substances or exopolymers), salt, and hydrodynamic disturbance. Resulting from the flocculation-disaggregation between the colloidal clay and exopolymer, the size and structure changes of the cohesive sediments are of key importance for understanding sediment transport processes (i.e., settling, breakage, and survivability) and the geotechnical and geophysical properties of the bottom bed. Because the coastal environment is extremely complicated, with many unpredictable and uncontrollable parameters, current knowledge is still insufficient to predict or fully explain the behavior of …

Investigation Of Best Practices For Maintenance Of Concrete Bridge Railings, Angel Luis Lence

LSU Master's Theses

Biodeterioration on concrete surfaces of vertical elements of bridges represents a serious challenge to the highway infrastructure in Louisiana. This investigation aims to document the causes of biodeterioration of concrete surfaces and to document current conventional and state-of-the-art practices implemented to prevent and clean biofilm. A comprehensive literature review of previous research has been carried out in order to determine the cause and mechanisms of the biodeterioration as well as to identify current methods that state DOTs have implemented in order to maintain their bridges and allow them to function in optimal structural and performance conditions. A survey was developed …

Quantification Of The Environmental Impact Of Titanium Dioxide Photocatalytic Pavements For Air Pollution Remediation, Heather Lee Dylla

LSU Doctoral Dissertations

Photocatalytic concrete pavements are a promising technology for mobile source air pollution remediation, however before widespread application of this technology is realized many unanswered questions remain regarding its overall environmental impact. In response to these questions, the goal of this study was to increase the understanding of the environmental impact of photocatalytic concrete pavement highways. To achieve this goal, the objectives of this study were to (A) construct a model that evaluates the nitrogen oxides (NOx) reduction from photocatalytic pavements, (B) quantify the nitrates released from the photocatalytic degradation of NOx, and (C) identify and characterize pathways for TiO2 nanoparticle …

Automated Semantic Content Extraction From Images, Mahdi Arab Khazaeli

LSU Doctoral Dissertations

In this study, an automatic semantic segmentation and object recognition methodology is implemented which bridges the semantic gap between low level features of image content and high level conceptual meaning. Semantically understanding an image is essential in modeling autonomous robots, targeting customers in marketing or reverse engineering of building information modeling in the construction industry. To achieve an understanding of a room from a single image we proposed a new object recognition framework which has four major components: segmentation, scene detection, conceptual cueing and object recognition. The new segmentation methodology developed in this research extends Felzenswalb's cost function to include …

Designing A Cost Effective Microalgae Harvesting Strategy For Biodiesel Production With Electrocoagulation And Dissolved Air Flotation, Adam James Dassey

LSU Doctoral Dissertations

Microalgal harvesting strategies for biodiesel production have been a major setback in the industry with high energy estimates of $3400/ton biomass by centrifugation. The present study utilized effective mass and energy balances to reduce these large operating costs. The energy for Stage 1 centrifugation was reduced by 82% when harvesting 28.5% of biomass at 18 L/min as opposed to 95% harvesting at 1 L/min. This strategy was further confirmed using electrocoagulation (EC) with Nannochloris and Dunaliella algae with perforated aluminum and iron electrodes at low (< 6 mg/L) metal ion concentrations. Despite 20% lower harvesting efficiencies, the iron electrodes were more energy and cost efficient with operating costs less than $0.03/L oil when flocculating and settling Nannochloris and Dunaliella cultures. Furthermore, a continuous multistage algae harvester using EC and dissolved air flotation (DAF) for Stage 1 harvesting and centrifugation for Stage 2 dewatering was designed. It was determined throughout the testing that greater EC costs for improved harvesting efficiencies were necessary to offset the large energy requirements of the DAF. The multistage system dewatered a low density (100 mg/L) Nannochloris to 20% solids for a final energy requirement of 1.536 kWh/kg algae ($138/ton). Using the data collected from this research and existing literature, a life cycle analysis was assembled to judge the sustainability of microalgal biofuels in Louisiana. High and low energy estimates for culturing (mixing, CO2, nutrients), harvesting, lipid extraction and energy conversion were compared with the current research. Scaling the EC/DAF system for a full size facility was expected to reduce the harvesting costs to 1.133 kWh/kg algae, resulting as $0.44/L oil for a culture with 20% lipids. Despite this improvement in harvesting costs, the production of algal for the sole purpose of biodiesel was not economically viable. Considering a system with a growth rate of 15 g/m2/day and lipid content of 20%, the energy inputs exceeded the outputs from biodiesel production by 36% under the most ideal conditions. However, incorporating additional revenue through wastewater treatment and biogas production from residual biomass could improve sustainability and profitability of algal biodiesel to an 18.5% energy surplus at its current state.

Geodatabase-Assisted Storm Surge Modeling, Sait Ahmet Binselam

LSU Doctoral Dissertations

Tropical cyclone-generated storm surge frequently causes catastrophic damage in communities along the Gulf of Mexico. The prediction of landfalling or hypothetical storm surge magnitudes in U.S. Gulf Coast regions remains problematic, in part, because of the dearth of historic event parameter data, including accurate records of storm surge magnitude (elevation) at locations along the coast from hurricanes. While detailed historical records exist that describe hurricane tracks, these data have rarely been correlated with the resulting storm surge, limiting our ability to make statistical inferences, which are needed to fully understand the vulnerability of the U.S. Gulf Coast to hurricane-induced storm …

Resolving Pronominal Anaphora Using Commonsense Knowledge, Seyedeh Leili Javadpour

LSU Doctoral Dissertations

Coreference resolution is the task of resolving all expressions in a text that refer to the same entity. Such expressions are often used in writing and speech as shortcuts to avoid repetition. The most frequent form of coreference is the anaphor. To resolve anaphora not only grammatical and syntactical strategies are required, but also semantic approaches should be taken into consideration. This dissertation presents a framework for automatically resolving pronominal anaphora by integrating recent findings from the field of linguistics with new semantic features. Commonsense knowledge is the routine knowledge people have of the everyday world. Because such knowledge is …

Experiments To Measure The Effects Of Timber Harvesting Equipment On Surface Lithic Scatters, Douglas J. Baughman

All Master's Theses

The importance of cultural resource preservation cannot be overstated; however local economies are at least as important. Due to conservative archaeological site protection practices in Region 5 of the United States Forest Service, the economy of Northeastern California is being adversely affected. In an attempt to help the Forest Service make more informed management decisions and improve the Northeastern California economy, I undertook experiments on the effects of timber harvesting on lithic scatters on Modoc National Forest. The experiments involved placement of 225 glass tiles (proxy lithics) in each of three plots subject to vehicle traffic and log dragging by …

Impedance Changes In Biceps Brachii Due To Isometric Contractions And Muscle Fatigue Using Electrical Impedance Myography (Eim), Travis Orth

College of Graduate Studies: Theses & Dissertations

Electrical impedance myography (EIM) is a non-invasive technique used to evaluate neuromuscular conditions by using a quantitative parameter called impedance (Z). It relies upon the application and measurement of high-frequency, low-intensity electrical current imbedded over a localized muscle to determine its opposition to current flow. In brevity, impedance determines the resistance of muscle fibers due to changes in muscle composition. The objective of this thesis was to establish a relationship between muscles at rest and during isometric contractions at various force levels(25%, 50%, and 100% of maximum voluntary contraction) of the biceps brachii over a multifrequency spectrum. Impedance measurements due …

Reducing Metal Alloy Powder Costs For Use In Powder Bed Fusion Additive Manufacturing: Improving The Economics For Production, Fransisco Medina

Open Access Theses & Dissertations

Titanium and its associated alloys have been used in industry for over 50 years and have become more popular in the recent decades. Titanium has been most successful in areas where the high strength to weight ratio provides an advantage over aluminum and steels. Other advantages of titanium include biocompatibility and corrosion resistance. Electron Beam Melting (EBM) is an additive manufacturing (AM) technology that has been successfully applied in the manufacturing of titanium components for the aerospace and medical industry with equivalent or better mechanical properties as parts fabricated via more traditional casting and machining methods. As the demand for …

Crystal Structure, Phase, And Optical Properties Of Yttrium-Doped Hafnium Oxide Nanocrystalline Thin Films, Alejandro Ortega

Open Access Theses & Dissertations

Yttrium-doped hafnium oxide (YDH) nanocrystalline films were produced by sputter-deposition at various substrate times and temperatures, to produce YDH films in a wide range of thicknesses, dYDH∼25 to 1100 nm. The deposition was made onto optical grade quartz and sapphire substrates. Samples deposited on sapphire were subject to post-deposition annealing (PDA) at various times (3-24 hr) and temperatures (1100 - 1500 °C). The effect of d[special characters omitted]YDH on the crystal structure, surface/interface morphology and optical properties of YDH films was investigated. X-ray diffraction analyses revealed the formation of monoclinic phase for relatively thin films (<150nm). The evolution towards stabilized cubic phase with increasing dYDH [special characters omitted]is observed. The scanning electron microscopy results indicate the dense, columnar structure of YDH films as a function of dYDH. Spectrophotometry analyses indicate that the grown YDH films are transparent and exhibit interference fringes. The band gap was found to be ∼ 5.60 eV for monoclinic YDH films while distinct separation and an increase in band gap to 6.03 eV is evident with increasing dYDH and formation cubic YDH films. The PDA films band gaps were found to be between 5.31 and 5.72 eV, all of which exhibit secondary gaps. A correlation between growth conditions, annealing, phase evolution, and optical properties of the YDH nanocrystalline thin films is established.

Comparative Characterization Of Ni-Base Superalloys Fabricated By Laser And Electron Beam Melting Technologies, Krista Amato

Open Access Theses & Dissertations

Nickel-base superalloys have been used in cast and wrought, and powder metallurgy forms for nearly four decades for industrial and automotive applications. One drawback of cast alloys is that upon solidification, there is minimal microstructural control. Another issue to be improved is to eliminate the limitations of shapes and forms of fabricated alloys.

Rapid prototyping is a new technology of additive manufacturing that shows to be promising for the freeform fabrication of novel superalloys, including nickel-base alloys. New rapid manufacturing technologies allow us to produce parts in any shape that can be designed by computer-aided design (CAD) software. Additionally, the …

Process Study And Control Of Electron Beam Melting Technology Using Infrared Thermography, Jorge Mireles

Open Access Theses & Dissertations

An IR camera was installed in an Arcam A2 system (Arcam AB, Mölndal, Sweeden) and layer-by-layer image acquisition was achieved. The camera's capability to detect manufacturing defects was evaluated by implementing computer vision techniques using LabVIEW measurement and programming software (National Instruments, Austin, TX). Thermal maps acquired by the IR camera allowed layer-by-layer part temperature to be recorded. A core objective of this research was to study the impact of processing temperature on EBM-fabricated Ti-6Al-4V parts and achieve controlled mechanical properties. In this research, build variations were achieved by modifying parameters that change processing temperature from the standard processing temperature. …

Experimental Study On The Fabrication Of Advanced Materials For Energy Applications Using High Energy Mechanical Milling, Ashvin Kumar Narayana Swamy

Open Access Theses & Dissertations

The reaction of aluminum (Al) powder with water has the potential for on demand hydrogen generation. Conventional Al powders, however, react with water slowly due to a highly protective oxide layer on the particle surface. Current methods for Al activation involve harmful and expensive materials. The nano-scale Al powders also remain very expensive and have problems such as a large amount of oxide on the surface. The use of aluminum in an energy generation cycle is also hindered by the fact that, although Al is the most abundant metal in the Earth's crust, its recovery from ore consumes a lot …

Effect Of Hafnium-Incorporation On The Microstructure And Dielectric Properties Of Cobalt Ferrite Ceramics, Stephen Josiah Wells

Open Access Theses & Dissertations

The effect of hafnium ion (Hf⁴⁺) incorporation in cobalt ferrite (CFO) was studied. Samples of Hf substituted CFO ceramic (CoFe_2-xHf_xO₄), were synthesized in the laboratory with hafnium concentrations ranging from x=0.000 to x=0.200. X-ray diffraction scans show that the Hafnium CFO crystalizes in the inverse spinel phase. Inclusion of hafnium causes lattice expansion, increasing the lattice parameter from 8.374 í? for pure CoFe2O4 to 8.391 í? for the highest concentration of hafnium tested (x=0.020). The dielectric properties of CFO are greatly enhanced by inclusion of hafnium. The enhancement is due to the …

Thermal Barrier Coatings (Tbc's) For High Heat Flux Thrust Chambers, Christopher Michael Bradley

Open Access Theses & Dissertations

The last 30 years materials engineers have been under continual pressure to develop materials with a greater temperature potential or to produce configurations that can be effectively cooled or otherwise protected at elevated temperature conditions. Turbines and thrust chambers produce some of the harshest service conditions for materials which lead to the challenges engineers face in order to increase the efficiencies of current technologies due to the energy crisis that the world is facing. The key tasks for the future of gas turbines are to increase overall efficiencies to meet energy demands of a growing world population and reduce the …

Microstructure And Properties For Titanium Aluminide Superalloy Prototypes Fabricated By Electron Beam Melting And Thermally Processed, Jennifer Hernandez

Open Access Theses & Dissertations

Gamma TiAl has been considered to be an ideal replacement for Ni-base superalloy aerospace applications, particularly in weight-critical applications. While bulk, fully dense gamma-TiAl is 50% less dense than Ni-base superalloys, it also has excellent mechanical properties at high temperature (up to ~800°C). Pre alloyed (Ti-48Al-2Cr-2Nb) powder was used to fabricate solid, fully dense (3.85 g/cm3) components and foam components with densities ranging from 0.33 g/cm³ to 0.46 g/cm³ by electron beam melting (EBM). A 10:1 blend of 2-phase TiAl (Ti-48Al-2Cr-2Nb in ^a/_o) : Inconel 625 (Ni-22Cr-6Mo-2Nb in ^a/_o) pre-alloyed powders produced …

New Topics On Nanoindentation Of Polymers And Composite Materials, Ricardo Martinez-Hernandez

Open Access Theses & Dissertations

In this study, nanoindentation was used to determine Young's modulus of homogeneous plastic materials as well as inhomogeneous epoxy woven fabric composites using various indenters. In the first part, homogeneous PMMA and polycarbonate were characterized using conical and spherical indenters. The conventional approach of the inverse analysis was modified in order to account for effects obtained during spherical nanoindentation. The experimental results were verified using FEA analysis in ABAQUS. It was found that viscous effects were present in conical nanoindentations which led to an overestimation of contact stiffness. The second part, the response of carbon and glass fiber woven fabric …

Rbd2po4: Room Temprature Synthesis, Chemical And Structural Stablity Upon Heating, Masoud Mollaee

Open Access Theses & Dissertations

Monoclinic RbD2PO4 polycrystals were synthesized via the room temperature crystallization of RbH2PO4 dissolved in D2O. Powder x-ray diffraction (XRD) data collected at T=25 ºC indicate that this deuterated compound crystallizes in space group P21/m with unit cell parameters a=7.688í?, b=6.192í?, c=4.781í? and β=109.02°, and is isomorphic with the intermediate-temperature phase of its hydrogenated counterpart rubidium dihydrogen phosphate (RDP). We found no evidence of previously reported [Phase Transitions 80, 17 (2007)] polymorphic phase transition in rubidium dideuterium phosphate (DRDP) upon heating from room temperature to 210 ºC. All lattice parameters vary smoothly within this temperature range, demonstrating that the P21/m phase …

Carbon-Based Nanostructured Materials As Electrode In Lithium-Ion Batteries And Supercapacitors, Zhuo Yao

Browse all Theses and Dissertations

Carbon-based nancomposites attract much attention as electrode materials in electrochemical energy storage systems due to their low-cost, extraordinary high electrical and thermal conductivity, super high surface area etc. In this research, graphene nanosheets (GNS) and their nanocomposites with manganese oxides (GNS/MnOx) or silicon nanowires (GNS/SiNWs/CF) are studied for their applications in Li-ion batteries and supercapacitors. GNS powders are synthesized via a chemical oxidation of nature graphite followed by appropriate reduction process. GNS/MnOx composites are synthesized rendering MnOx nanoparticles embedded on the surfaces of GNS. SiNWs grown in carbon fibers are mechanically mixed with GNS powders. The impacts of the manganese …

Active Optimal Control Strategies For Increasing The Efficiency Of Photovoltaic Cells, Sharif Aljoaba

Theses and Dissertations--Electrical and Computer Engineering

Energy consumption has increased drastically during the last century. Currently, the worldwide energy consumption is about 17.4 TW and is predicted to reach 25 TW by 2035. Solar energy has emerged as one of the potential renewable energy sources. Since its first physical recognition in 1887 by Adams and Day till nowadays, research in solar energy is continuously developing. This has lead to many achievements and milestones that introduced it as one of the most reliable and sustainable energy sources. Recently, the International Energy Agency declared that solar energy is predicted to be one of the major electricity production energy …

Solution-Processed Nanoparticle Super-Float-Gated Organic Field-Effect Transistor As Un-Cooled Ultraviolet And Infrared Photon Counter, Yongbo Yuan, Qingfeng Dong, Bin Yang, Fawen Guo, Qi Zhang, Ming Han, Jinsong Huang

Department of Mechanical and Materials Engineering: Faculty Publications

High sensitivity photodetectors in ultraviolet (UV) and infrared (IR) range have broad civilian and military applications. Here we report on an un-cooled solution-processed UV-IR photon counter based on modified organic field-effect transistors. This type of UV detectors have light absorbing zinc oxide nanoparticles (NPs) sandwiched between two gate dielectric layers as a floating gate. The photon-generated charges on the floating gate cause high resistance regions in the transistor channel and tune the source-drain output current. This ‘‘super-float-gating’’ mechanism enables very high sensitivity photodetectors with a minimum detectable ultraviolet light intensity of 2.6 photons/µm²s at room temperature as well …

Analysis Of Electrically-Forced Vibrations Of Piezoelectric Mesa Resonators, Huijing He, Guo-Quan Nie, Jin-Xi Liu, Jiashi Yang

Department of Mechanical and Materials Engineering: Faculty Publications

We study the electrically forced thickness-shear and thickness-twist vibrations of stepped thickness piezoelectric plate mesa resonators made of polarized ceramics or 6-mm class crystals. A theoretical analysis based on the theory of piezoelectricity is performed, and an analytical solution is obtained using the trigonometric series. The electrical admittance, resonant frequencies, and mode shapes are calculated, and strong energy trapping of the modes is observed. Their dependence on the geometric parameters of the resonator is also examined.

Review Of Electrochemical And Electrodischarge Machining, Kamlakar P. Rajurkar, M. M. Sundaram, A. P. Malshe

Department of Mechanical and Materials Engineering: Faculty Publications

Electrochemical and electro-discharge machining processes are the two major electro-machining processes with unique capabilities. Electrical Discharge Machining (EDM) and Electrochemical Machining (ECM) offer a better alternative or sometimes the only alternative in generating accurate 3-D complex shaped macro, micro and nano features and components of difficult–to-machine materials. Technological advances reported in electrochemical and electro discharge machining processes, which reflect the state of the art in academic and industrial research and applications, are briefly reviewed in this paper.