Engineering Science and Materials Commons^™

Highly Crystalline Nickel Borate Nanorods As Oxygen Evolution Reaction Electrocatalysts, Xi Xu, Juan Liu, Hua-Zong Wu, Wen-Jie Jiang

Journal of Electrochemistry

Hydrogen energy, a kind of clean and renewable energy, is considered to be the solution to the problems of energy crisis and environmental deterioration. Electrochemical water splitting is an efficient and promising technology for the production of high-purity hydrogen. However, oxygen evolution reaction (OER) at the anode of water electrolyzer limits the efficiency of water splitting due to the high overpotential. Therefore, the challenges still remain for the exploration of highly active, stable and low-cost catalysts with superior activity for OER. Herein, nickel borate nanorods with high crystallinity were prepared via high-temperature calcination. The as-obtained nickel borate nanorods with 2 …

Influences Of Na-Mn Ratio On Electrochemical Performances And Intercalation-Deintercalation Processes Of Sodium Ion In NaXMno2, Yong-Chun Xie, Cheng Wang, Fang Jiang, Yang Yang, Jing Su, Yun-Fei Long, Yan-Xuan Wen

Journal of Electrochemistry

In this work, Na_xMnO₂ was synthesized by a solid-state reaction. The influences of Na:Mn ratio on the structure, morphology and electrochemical performance, and sodium ion intercalation/deintercalation processes were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, field emission scanning electron microscopy, cyclic voltammetry, electrochemical impedance spectroscopy and galvanostatic charge-discharge test. The prepared Na_xMnO₂ was mainly composed of Na_0.7MnO₂ and Na_0.91MnO₂, and the content of Na_0.91MnO₂ increased with the increase of Na:Mn ratio. However, the activation energy values of surface membrane diffusion, interfacial electrochemical reaction and …

Development Of Self-Healing Mechanisms For Asphalt Pavements, Max Abelardo Aguirre Deras

LSU Doctoral Dissertations

Self-healing mechanisms, such as microcapsules or hollow-fibers, filled with an asphalt rejuvenator present an emerging technology that would enhance an asphalt mixture’s resistance to cracking damage caused by vehicular and environmental loading. The objectives of this study were to: (a) Evaluate the effects of asphalt rejuvenators on hot-mix asphalt mixtures in order to test its effects on the fundamental engineering properties of the mixtures at high and intermediate temperatures; (b) Develop a synthesis procedure for production of microcapsules and hollow-fibers containing an asphalt rejuvenator; (c) Evaluate the self-healing efficiency of double-walled microcapsules and hollow-fibers filled with an asphalt rejuvenator, through …

Synthesis Of Crumpled Graphene And Titanium Dioxide Based–Nanomaterials And The Application To Carbon Dioxide Photoreduction, Yao Nie

McKelvey School of Engineering Graduate Student Theses & Dissertations

With the rapid development of the economy, increasing combustion of fossils fuels has caused an increase in the atmospheric carbon dioxide (CO2) level, and has led to global climate change. As a mitigation approach, CO2 capture and conversion (CCC) can not only capture CO2, but also convert it to useable products, such as hydrocarbon fuels. Photocatalytic reduction is an attractive CCC option that directly harnesses inexpensive and abundant solar energy. Titanium dioxide (TiO2) is a widely used semiconductor for photocatalysis, and graphene nanosheets are a promising material for use in fabricating graphene-TiO2 hybridized photocatalysts. To realize the application of these …

Developing Strategies To Toughen Bio-Inspired Adhesives, Narelli P. Narciso, Samuel Lee Huntington, Jonathan J. Wilker

The Summer Undergraduate Research Fellowship (SURF) Symposium

Mussels and other marine creatures adhere very well in underwater environments, having the ability to withstand the force of the sea. These animals have inspired synthetic biomimetic adhesives for wet systems, presenting potential for biomedical applications. However, most current commercial adhesives tend to be brittle, not resisting repetitive movements. This study assesses toughening strategies to improve the mussel-inspired adhesives’ ductility while maintaining its strength. The strategies included altering the polymer’s chemical structure by changing the percentage of polyethylene glycol (PEG) in the molecule and by adding fillers, such as calcium carbonate, silica and nacre - a calcium carbonate compound found …

Ice Adhesion Analysis Of Severely Aged Pdms Rubbers, Theodore R. Woll

Electronic Theses and Dissertations

The goal of this study was to evaluate and optimize the ice adhesion test initially developed by the University of Denver and to examine Polydimethylsiloxane (PDMS) based silicone rubbers for their ice-phobicity as a function of their physical and chemistry properties, and under severe oxidative aging. The test is based on an ice block bonded to a silicone rubber substrate and subjected to shear. In its original state, the test had severe limitations that caused the ice to be dislodged through a mixture of shear and peeling. Several steps were taken in this research to improve the test, and the …

Measuring Solid–Liquid Interfacial Energy Fields: Diffusion-Limited Patterns, Martin E. Glicksman

Mechanical and Civil Engineering Faculty Publications

The Leibniz–Reynolds transport theorem yields an omnimetric interface energy balance, i.e., one valid over all continuum length scales. The transport theorem, moreover, indicates that solid–liquid interfaces support capillary-mediated redistributions of energy capable of modulating an interface’s motion—a thermodynamic phenomenon not captured by Stefan balances that exclude capillarity. Capillary energy fields affect interfacial dynamics on scales from about 10 nm to several mm. These mesoscopic fields were studied using entropy density multiphase-field simulations. Energy rate distributions were exposed and measured by simulating equilibrated solid–liquid interfaces configured as stationary grain boundary grooves (GBGs). Negative rates of energy distributed over GBGs were measured …

Modeling And Validations Of Control Parameters For Material Extrusion-Based Additive Manufacturing Of Thixotropic Aluminum Alloys., Lars Herhold

Electronic Theses and Dissertations

Additive Manufacturing (AM) with metals has been accomplished mainly through powder bed fusion processes. Initial experiments and simulations using Material Extrusion Additive Manufacturing (MEAM) have been performed by various researchers especially using low melting alloys. Recently Stratasys Inc. submitted a patent application for the use of their Material Extrusion technology also called Fused Deposition Modeling (FDM) where they describe the process using thixotropic semi-solid alloys. Currently this process using semi-solid, engineering type alloys such as A356 or THIXALLOY 540 aluminum have not been researched to evaluate the control parameters. This research combines the in-depth knowledge of applying thixotropic semi-solid aluminum …

Pnnl Dark Matter Bubble Chamber, Ryan Robinson

STAR Program Research Presentations

The Pacific Northwest National Laboratory (PNNL) prototype bubble chamber is intended to address issues encountered with the current PICO dark matter search detectors and improve the functionality of future experimental designs. The PNNL bubble chamber accomplishes this with a simplified interface between the hydraulic pressure controls and the target vessel and altering the standard chamber design such that it can be easily exchanged and replaced with vessels of various sizes and materials for testing purposes. The chamber itself is a glass vessel which houses perfluorobutane and holds the target fluid above room temperature and atmospheric pressure. The target fluid becomes …

The Effect Of Rotational Speed, Friction Duration, And Pressure On Tensile Strength Of Aisi 6061 Welding Joints, Dewi Puspitasari, Poppy Puspitasari, M. Rizka Gita Firmansyah, Solichin Solichin

Journal of Mechanical Engineering Science and Technology (JMEST)

Electric arc welding with covered electrodes is ideally suited for flat plates. If this technique is employed for welding rigid bodies, the results would be of poor quality. One viable solution to weld rigid bodies is through friction welding. The study aimed to investigate the tensile strength of specimens subjected to friction welding with variations in rotational speed, friction time, and pressure and to examine the microstructure of friction welding joints. This research used the one-shot case study design and involved descriptive analysis. The descriptive analysis described the results of tensile testing and microstructure of welding joints. Results showed that …

Pine Flower Waste Innovation As A Plant Based Program Augmented Reality, Ayik Bela Saputra, Imam Muhtarom, Ni’Matul Rochmaniyah, Ardhana Iswari Citra Padmi, Ika Rahmawati

Journal of Mechanical Engineering Science and Technology (JMEST)

Indonesia one of the tropical countries in the world can not be separated from environment problems like other developing countries. One of the causes of declining environment quality is the decline of forests in Indonesia. In 2009, Indonesia’s forest area was by more than half, to about 88 million hectares. By the year 2013 the number is about 82 million hectares. One of the efforts to promote environment education is to familiarize planting plants to children from an early age from the school environment to the family environment. Therefore it is necessary an alternative in the form of planting media …

Effect Of Mnfe2o4 Nanoparticles To Reduce Co And Hc Levels On Vehicle Exhaust Gas Emissions, Poppy Puspitasari, Sukarni Sukarni, Amir Hamzah

Journal of Mechanical Engineering Science and Technology (JMEST)

The air pollution particle emitted from transportation in Indonesia Bay 2015 consist of 70.50% CO; 18.34% HC; 8.89% NOx; 0.88% SOx; 1.33%. These gases are very harmful to humans. To reduce the toxic gas effect, special treatment is needed, one of them is by applying catalyst on exhaust system. MnFe2O4 has the potential to bind the CO and HC elements contained in the exhaust gas. This study aims to investigate the effect of MnFe2O4 addition on catalityc converter towards CO gas and HC emissions of motor vehicles. Therefore, the percentage of exhaust reduction with and without applying MnFe2O4 on varied …

Damage Simulation Of Pre-Forming V-Neck Plates With Variations In Material Type, Time And Temperature Using The Taguchi Method, Avita Ayu Permanasari, Rr. Poppy Puspitasari, Kevin Valiant Cahya, Mahfud Ihsan

Journal of Mechanical Engineering Science and Technology (JMEST)

In metal forming, damage can be caused by several factors: load on the workpiece, initial heating temperature, and temperature due to the friction between the die and the material for pre-forming. The metal forming process can be executed in 2 ways, namely by hot working and cold working. During these two types of mechanical working process, the metal undergoes plastic deformation. In hot working, the required deformation force is relatively low, and changes in mechanical properties are also insignificant. In cold working, a higher force is required, but the strength of the metal will increase significantly. The use of simulation …

Mechanical Properties And Permeability Of Sand Casting Moulds With Eggshells Binder, Maryam Sharifi Jebeli Sharifi Jebeli, Wahyu Kurnianto, Wahono Wahono

Journal of Mechanical Engineering Science and Technology (JMEST)

This research aimed to analyse whether or not eggshell could be a potential addition to sand mould composition as a binding material together with bentonite. Different amounts of eggshell material, i.e. 4%, 7%, 10% and 3%, were added to each sample. This study was a type of pre-experimental design called the one-shot case study. Among all sand moulds under study, sample 3 10% ES in dry conditions had the highest tensile, compressive and shear strengths of 0.09 Kg/cm2, 3.11 Kg/cm2 and 1.13 Kg/cm2, respectively. The results of the permeability test with heat treatment at 110˚C for 60 minutes showed that …

Properties Of Cassava Starch Based Bioplastic Reinforced By Nanoclay, Nanang Eko Wahyuningtiyas, Heru Suryanto

Journal of Mechanical Engineering Science and Technology (JMEST)

Synthetic Synthetic plastic is chemical materials which cause severe environmental problems. Incinerating plastic waste leads to release of hazardous gases, which is not good for humans. Bioplastic can help reduce the dependence on fossil fuels and petroleum, that bioplastic can solve the problem of synthetic plastic use. This research aims to define the properties of the cassava starch-based bioplastic reinforced by nanoclay. Methods were experimental with bioplastic component of cassava starch, glycerol as plasticizer and nanoclay as reinforcement. The bioplastic was analyzed using XRD, tensile test, moisture absorption, biodegradability, and compared with another bioplastic. The results show that the addition …

Full Field Computing For Elastic Pulse Dispersion In Inhomogeneous Bars, A. Berezovski, R. Kolman, M. Berezovski, D. Gabriel, V. Adamek

Publications

In the paper, the finite element method and the finite volume method are used in parallel for the simulation of a pulse propagation in periodically layered composites beyond the validity of homogenization methods. The direct numerical integration of a pulse propagation demonstrates dispersion effects and dynamic stress redistribution in physical space on example of a one-dimensional layered bar. Results of numerical simulations are compared with analytical solution constructed specifically for the considered problem. Analytical solution as well as numerical computations show the strong influence of the composition of constituents on the dispersion of a pulse in a heterogeneous bar and …

Tunable Plasmonic Resonances In Highly Porous Nano-Bamboo Si-Au Superlattice-Type Thin Films, Ufuk Kılıç, Alyssa Mock, René Feder, Derek Sekora, Matthew J. Hilfiker, Rafal Korlacki, Eva Schubert, Christos Argyropoulos, Mathias Schubert

Department of Electrical and Computer Engineering: Faculty Publications

We report on fabrication of spatially-coherent columnar plasmonic nanostructure superlattice-type thin films with high porosity and strong optical anisotropy using glancing angle deposition. Subsequent and repeated depositions of silicon and gold lead to nanometer-dimension subcolumns with controlled lengths. The superlattice-type columns resemble bamboo structures where smaller column sections of gold form junctions sandwiched between larger silicon column sections (“nano-bamboo”). We perform generalized spectroscopic ellipsometry measurements and finite element method computations to elucidate the strongly anisotropic optical properties of the highly-porous nano-bamboo structures. The occurrence of a strongly localized plasmonic mode with displacement pattern reminiscent of a dark quadrupole mode is …

Near-Field Heat Transfer Enabled Nanothermomechanical Memory And Logic Devices, Sidy Ndao, Mahmoud Elzouka

Department of Mechanical and Materials Engineering: Faculty Publications

A thermomechanical memory / logic device is disclosed . In embodiments , the thermomechanical device includes a first thermally controlled terminal ( e . g . , hot terminal ) ; a second thermally controlled terminal ( e . g . , cool terminal / base ) ; a stem or other structure that can be thermally expanded connected to the cool terminal ; and a thermal conductive head coupled to the stem . The head can exchange heat with the hot terminal . The stem and head are between the first thermally controlled terminal and the second thermally controlled …

Artificial Neural Network And Finite Element Modeling Of Nanoindentation Tests On Silica, Kianoosh Koocheki

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Two major forms of Silica include the crystalline form named Quartz which consist of the sand grains in nature, and amorphous form named Silica Glass or Fused Silica which is commonly known as glass. Fused Silica is an amorphous crystal that can show plastic behavior at micro-scale despite its brittle behavior in large scales. Due to the amorphous and ductile nature of Fused Silica, this behavior may not be explained well using the traditional dislocation-based mechanism of plasticity for crystalline solids. The crystal plasticity happens due to shear stress and stored energy in the material as dislocations which does not …

Properties Of Matter, Mike Jackson, Holly Haney

High School Lesson Plans

Students will investigate the relationship(s) between thermal and electrical properties of matter. First, students will use a multimeter and temperature probe to investigate the relationship between electrical resistance and temperature of an electrical resistor composed of metals. They will then graph collected data to analyze the relationship and draw a conclusion as to their relationship. They will then perform the same investigation on a thermal resistor made of a semiconducting substance and analyze that collected data. Finally, using ClaimEvidence-Reasoning (CER) structure, students will use their experimental evidence to state the similarities and differences between the electro-thermal properties of metals and …

Prevascularization Of 3d Printed Bone Scaffolds By Bioactive Hydrogels And Cell Co-Culture, Mitchell Kuss, Shaohua Wu, Ying Wang, Jason B. Untrauer, Wenlong Li, Jung Yul Lim, Bin Duan

Department of Mechanical and Materials Engineering: Faculty Publications

Vascularization is a fundamental prerequisite for large bone construct development and remains one of the main challenges of bone tissue engineering. Our current study presents the combination of 3D printing technique with a hydrogel-based prevascularization strategy to generate prevascularized bone constructs. Human adipose derived mesenchymal stem cells (ADMSC) and human umbilical vein endothelial cells (HUVEC) were encapsulated within our bioactive hydrogels, and the effects of culture conditions on in vitro vascularization were determined. We further generated composite constructs by forming 3D printed polycaprolactone/hydroxyapatite scaffolds coated with cell-laden hydrogels and determined how the co-culture affected vascularization and osteogenesis. It was demonstrated …

Continuous Flow Process For Recovery Of Metal Contaminants From Industrial Wastewaters With Magnetic Nanocomposites, David Hutchins

Graduate Theses & Non-Theses

Remediation of metal-containing industrial effluents presents both a technical challenge and an economic opportunity. Many industrial waste streams contain low levels of metal ions requiring treatment prior to discharge. Existing treatment technologies are frustrated by disparate compositions and low metal concentrations. Chemical precipitation is effective; however, it requires excessive reagents and discourages selective recovery. Ion-exchange enables recovery, but requires a batch process with extensive operational and maintenance demands, and is rarely implemented in large-scale applications. A continuous flow process capable of selective recovery would present many advantages over existing technologies.

This research examines and develops a continuous flow process for …

Smart Bandage For Monitoring And Treatment Of Chronic Wounds, Pooria Mostafalu, Ali Tamayol, Rahim Rahimi, Manuel Ochoa, Akbar Khalilpour, Gita Kiaee, Iman K. Yazdi, Sara Bagherifard, Mehmet R. Dokmeci, Babak Ziaie, Sameer R. Sonkusale, Ali Khademhosseini

Department of Mechanical and Materials Engineering: Faculty Publications

Chronic wounds are a major health concern and they affect the lives of more than 25 million people in the United States. They are susceptible to infection and are the leading cause of nontraumatic limb amputations worldwide. The wound environment is dynamic, but their healing rate can be enhanced by administration of therapies at the right time. This approach requires real-time monitoring of the wound environment with on-demand drug delivery in a closed-loop manner. In this paper, a smart and automated flexible wound dressing with temperature and pH sensors integrated onto flexible bandages that monitor wound status in real-time to …

Interface Structure And Deformation Mechanisms Of Mg/Nb Multilayers, Xinyan Xie

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Magnesium (Mg) and its alloys, as the lightest structural materials, are very attractive for a range of weight sensitive applications, such as aircraft engine, transportation industry and so on. However, their further applications are limited due to the weak properties, such as the low strength and poor ductility. In recent years, advanced techniques aiming at the modification of the microstructures, have been developed to promote the properties of Mg and its alloys, such as modifying the texture, refining the grain size, forming the intermetallic phase, and introducing the interfaces or stacking faults into the systems. Constructing Mg/Nb multilayers, which introduces …

Dynamic Behavior Of Granular Earth Materials Subjected To Pressure-Shear Loading, Jeff Wilson Lajeunesse

Dissertations (1934 -)

The dynamic response of granular earth materials such as sand has been of interest for many years. Multiple previous works have explored the shock response of sand in various grain shapes, sizes, and moisture contents, but the response during rapid combined loading has been relatively unexplored. The current study contributes to that lack of data by performing pressure-shear experiments on Oklahoma #1 silica sand, with quasi-smooth grains of 63 - 120 micron diameter and 99.8 wt.% Si02 composition. In these experiments, an oblique flyer plate impacts an equally inclined target, imparting a longitudinal (pressure) and transverse (shear) wave into a …

Recent Progress For Fe-N-C Electrocatalysts In Alkaline Fuel Cells, Xin Deng, Heng-Quan Chen, Ye Hu, Qing-Gang He

Journal of Electrochemistry

Fuel cells are highly recommended nowadays due to their intrinsic advantages such as high energy conversion efficiency, nearly no pollution, and convenient operation. With the development of anion exchange membrane, alkaline fuel cells have gone through a renaissance thanks to their superiorities such as faster reaction kinetics, wider choices for both fuels and electrocatalysts. It is essential to find an appropriate electrocatalyst for oxygen reduction reaction (ORR) to improve the performance of alkaline fuel cells. Further commercialization of the widely used Pt-based materials has suffered from disadvantages such as scarcity and high cost. As alternatives to largely investigated Pt-based materials, …

Pt/G-C3N4 Nanosheet For Visible Light-Induced Enhancement Of The Activity For Formic Acid Electro-Oxidation, Yong-Rong Sun, Chun-Yu Du, Guo-Kang Han, Ya-Jing Wang, Yun-Zhi Gao, Ge-Ping Yin

Journal of Electrochemistry

By using graphitic carbon nitride nanosheet (g-C₃N₄ nanosheet) as a support,Pt/g-C₃N₄ nanosheet catalyst was fabricated by microwave assisted polylol process. The nanoparticles size,composition,structure and optical properties of Pt/g-C₃N₄ nanosheet were characterized by TEM,XRD,XPS and UV-Vis diffuse reflectance spectroscopy. Comparing with the catalytic activities toward formic acid electro-oxidation under dark and visible light illumination,the superior activity of Pt/g-C₃N₄ nanosheet catalyst was achieved under visible light illumination. This visible light-driven enhancement in the formic acid performance could be attributed to the plasmon-induced electron-hole separation on g-C₃N₄ with …

Carbon Composite Fe3O4 Nanoparticles Based Electrochemical Sensor For Hydrogen Peroxide Detection, Si-Yu Zhang, Hui-Juan Wang, Shu-Fang Li, Jian-Ying Qu

Journal of Electrochemistry

In this work, a novel hydrogen peroxide electrochemical sensor was constructed with ferroferric oxide (Fe₃O₄) magnetic nanoparticles, which demonstrated good electrocatalytic activity for hydrogen peroxide. There existed a good linear relationship between the concentration of hydrogen peroxide and the oxidation peak current in the range of 1.00 × 10^-6 ~ 1.00 × 10^-3 mol·L^-1 (R = 0.9980) with the detection limit of 6.60 × 10-7 mol·L^-1. The sensor exhibited good anti-interference ability, high reproducibility and stability.

Simulation Of Fractal Growth On Metal Wire Electrode, Li-Feng Ding, Pei-Yuan Mao, Jun Cheng, Yu-Lan Niu, Yu-Hao Wen, Wei Chen

Journal of Electrochemistry

During processes of metal electrodepostion, there exist many complex morphological forms such as dendritic growing in the cathode deposited metal edge, which will seriously affect the quality of the electrodeposited product and current efficiency during machining. Investigations on dendritic crystal growing process and morphology could help controlling growth of electrolysis precipitate. In this work, Python and Matlab softwares were used, and the model of parallel electrode electrodeposition was established based on the diffusion-limited aggregation (DLA) model. By analyzing the law of fractal growth at different conditions of the particles number, probability, electrode spacing, the movement step length and orientation drift, …

Lead Modified Nanoporous Platinum Electro-Catalysts For Formic Acid Oxidation, Yuan-Yuan Zhang, Qing-Feng Yi, Ge-Kun-Kun Zuo, Tao Zou, Xiao-Ping Liu, Xiu-Lin Zhou

Journal of Electrochemistry

Platinum (Pt) catalysts modified by other suitable metals significantly enhance their electrochemical activities for formic acid oxidation. In this work, a titanium-supported nanoporous network platinum (nanoPt/Ti) electrode was prepared using a hydrothermal method. The as-prepared nanoPt/Ti electrode was modified with a certain amount of lead by using cyclic voltammetry for different scan cycle numbers (n), namely, n = 10, 15, 20 and 30, to synthesize the novel lead-modified nanoporous Pt (nanoPb_(n)-Pt/Ti) electrodes. Electro-oxidation of formic acid on these electrodes was studied with cyclic voltammetry (CV), chronoamperometry and chronopotentiometry in sulfuric acid solution. CV curves showed that both nanoPt/Ti …