Engineering Science and Materials Commons^™

Me-Em Enewsbrief, October-December 2020, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

The Effect Of Guide Vane Opening Variations And Total Blades On Cross Flow Turbine Performance Using Computational Fluid Dynamic, Muhamad Akbar Navis, Heru Suryanto, Putut Murdanto

Journal of Mechanical Engineering Science and Technology (JMEST)

Indonesia is an agrarian country that continuously produces water, so it has the potential to develop a hydroelectric power plant. Computational Fluid Dynamic (CFD) application could be used to be an economical, quick, and efficient approach to improve the engineering design and turbine performance. This research aimed to find the effect of guide vane opening variations and total blades on cross-flow turbine performance using CFD simulation. This research used experimental modelling method with ANSYS program for turbine design with 22, 24, and 26 turbine blades and guide vane opening variations of 12°, 16°, 20°, 24°, and 36°. The data were …

Energy And Exergy Efficiency Of Double Slope Passive Solar Still, Jandri Fan Ht Saragi, Wawan Septiawan Damanik

Journal of Mechanical Engineering Science and Technology (JMEST)

Solar desalination functions to filter water, both sea water and brackish water, to produce clean water that is fit for consumption with energy from the sun. Solar energy is a renewable energy source that has been widely studied for its use. One of its uses is in a double slope passive solar still where the sun is the main source. Energy and exergy obtained from solar energy are not all used to evaporate water in the desalination system, so it is necessary to calculate efficiency energy and exergy in the system. This study aims to obtain data on the amount …

Characteristics Biolubricant Enriched With Nanoparticle Additives: A Review, Zhahra Hanif Sholiha, Gaguk Jatisukamto

Journal of Mechanical Engineering Science and Technology (JMEST)

The engine movement mechanism is a system composed of machine elements that contact or rub against each other between these surfaces. Surfaces that rub against each other will cause a friction force that causes wear on the surface, so it requires energy to fight the friction force. Lubricants are needed to reduce friction and reduce wear rates, where lubricants are generally made of mineral materials. Lubricants made from synthetic materials are non-renewable and cause environmental problems. The development of biolubricants as lubricating materials based on animal fats or vegetable oils is continuously being carried out. This study aims to observe …

Optimization Of Stir Casting Of Aluminum Matrix Composites (Amcs) With Filler Of Recycled Glass Powder (Rgp) For The Mechanical Properties, Yusup Hendronursito, Tumpal Ojahan, Anang Anshori, Asep Yunanto

Journal of Mechanical Engineering Science and Technology (JMEST)

A study of making Aluminum Matrix Composites (AMCs) uses recycled glass powder (RGP) as a filler has been carried out through the stir casting process. The experimental design uses the Taguchi method of 3^3 orthogonal array L9 with the parameters of powder size (20>x> 80, 80>y> 200, 200>z> 325), percentage of filler vs matrix (2%, 7%, 12%), and stirring time (30 Seconds, 3 Minutes, 12 Minutes). The optimum conditions for the hardness of Al-GRp composites were obtained from specimens with Mesh powder size parameters 200> z> 325, the percentage of glass vs aluminum powder was 12% wt, …

Surface Properties And Adsorption Capacities Of Rice Bran-Activated Carbon, Dewa Ngakan Ketut Putra Negara, Tjokorda Gde Tirta Nindhia, Wayan Nata Septiadi

Journal of Mechanical Engineering Science and Technology (JMEST)

The growing need for activated carbon requires alternative raw materials to replace non-renewable raw materials whose existence is decreasing. Biomass is a very promising precursor, one of which is from rice bran. This research concerns the development of activated carbon derived from rice bran. Carbonization was carried out at 600 OC and physically activated with nitrogen flow rates of 150 mL/min for 40, 80, and 120 minutes. The activated carbons produced (AC-D40, AC-D80, and AC-D120) were characterized to determine the surface properties, surface morphology, and adsorption capacity for nitrogen and blue methylene adsorptions. The results showed that activated carbon that …

Design Of Savonius Vertical Axis Wind Turbine For Vehicle, Filian Arbiyani, Fernando Pranata Lasut

Journal of Mechanical Engineering Science and Technology (JMEST)

The use of cellular phones is increasing in society, but due to the limited battery capacity of cell phones, it is necessary to charge the battery when travelling in the long distances. The Savonius type wind turbine has a potential as an energy source harvesting the wind energy flowing around the car. However, due to the available space on the car, careful design of Savonius vertical axis wind turbine for vehicle is necessary. The research is conducted numerically using MATLAB software. The wind speed, Reynolds number, and electric power output are numerically simulated to obtain the swept area design. Innovative …

New Design Of Aluminum 6061 Welding Joining Using Friction Stir Welding Method, Widia Setiawan, Nugroho Santoso, Surojo Surojo

Journal of Mechanical Engineering Science and Technology (JMEST)

Parallel, lap, corner, and T joints are commonly used in fusion welding and solid welding. Other joints made are lap and butt joint. This study aims to evaluate a new design of fitting model single U and double U for friction stirr welding of Aluminum. Aluminum sheet 6061with a thickness of 10 mm, will be cut to a length of 150 mm and a width of 100 mm, then a locking groove will be made with an inner size of 5 mm and a length of 150 mm The flow is used to be paired in the FSW process. This …

Tool Life Prediction Of Ti [C,N] Mixed Alumina Ceramic Cutting Tool Using Gradient Descent Algorithm On Machining Martensitic Stainless Steel, Joseph Daniel S, Senthil Kumar A

Journal of Mechanical Engineering Science and Technology (JMEST)

In automated manufacturing systems, most of the manufacturing processes, including machining, are automated. Automatic tool change is one of the important parameters for reducing manufacturing lead time. Machining studies on Martensitic Stainless Steel was conducted using Ti[C,N] mixed alumina ceramic cutting tool. Tool life was evaluated using flank wear criterion. The tool life obtained from experimental machining process was taken as training dataset and test dataset for machine learning. Tool life model was developed using Gradient Descent Algorithm. The accuracy of the machine learning model was tested using the test data, and 99.83% accuracy was obtained.

Moisture Reduction Of Honey In Dehumidification And Evaporation Processes, Anang Lastriyanto, Sasongko Aji Wibowo, Erwan Erwan, Firman Jaya, Jati Batoro, Dewi Masyithoh, J.S.A Lamerkabel

Journal of Mechanical Engineering Science and Technology (JMEST)

The high water content of honey can lead to fermentation and accelerate the deterioration of honey. One way to prevent fermentation in honey is to reduce the water content of honey. There are several ways to reduce the water content of honey, namely through a dehumidifier and evaporation. This study aimed to examine the relationship of reduced water content towards time in between dehumidifier and evaporation processes. The research method uses an exponential equation model to determine the value of the constant (K). The constant value (K) is used to predict the rate of reduction in moisture content between the …

Sustainable Drug Release From Polycaprolactone Coated Chitin‑Lignin Gel Fibrous Scaffolds, Turdimuhammad Abdullah, Kalamegam Gauthaman, Azadeh Mostafavi, Ahmed Alshahrie, Numan Salah, Pierfrancesco Morganti, Angelo Chianese, Ali Tamayol, Adnan Memic

Department of Mechanical and Materials Engineering: Faculty Publications

Non-healing wounds have placed an enormous stress on both patients and healthcare systems worldwide. Severe complications induced by these wounds can lead to limb amputation or even death and urgently require more effective treatments. Electrospun scaffolds have great potential for improving wound healing treatments by providing controlled drug delivery. Previously, we developed fibrous scaffolds from complex carbohydrate polymers [i.e. chitin-lignin (CL) gels]. However, their application was limited by solubility and undesirable burst drug release. Here, a coaxial electrospinning is applied to encapsulate the CL gels with polycaprolactone (PCL). Presence of a PCL shell layer thus provides longer shelf-life for the …

Development Of Reduced Order Models Using Reservoir Simulation And Physics Informed Machine Learning Techniques, Mark V. Behl Jr

LSU Master's Theses

Reservoir simulation is the industry standard for prediction and characterization of processes in the subsurface. However, simulation is computationally expensive and time consuming. This study explores reduced order models (ROMs) as an appropriate alternative. ROMs that use neural networks effectively capture nonlinear dependencies, and only require available operational data as inputs. Neural networks are a black box and difficult to interpret, however. Physics informed neural networks (PINNs) provide a potential solution to these shortcomings, but have not yet been applied extensively in petroleum engineering.

A mature black-oil simulation model from Volve public data release was used to generate training data …

Effective Hair Styling Compositions And Processes, Yiqi Yang, Helan Xu, Kaili Song

Department of Textiles, Merchandising and Fashion Design: Faculty Publications

This disclosure relates to hair styling compositions and processes , and more particularly to compositions for disentangling or crosslinking hair that are useful in hair styling processes.

Urine Volume Reduction During Long-Duration Cave Exploration By A Light-Weight And Portable Forward Osmosis System, Sebastian Engelhardt, Katey E. Bender, Jörg Vogel, Stephen E. Duirk, Francisco B. Moore, Hazel A. Barton

International Journal of Speleology

The preservation of caves is a challenge during long-duration cave expeditions where human waste can add significant nitrogen to the cave ecosystem. Since the removal of urine that accumulates during a multi-day caving trip is not always feasible due to weight and volume constraints, a light-weight and portable filtration system that is capable of reducing urine volume would be desirable. In this study we tested the Aquaporin Inside hollow fiber membrane in a forward osmosis (FO) setup to evaluate its capability to reduce urine volume while rejecting nitrogenous compounds using different draw solution chemistries and water recovery rates. As a …

Adsorption And Reconfiguration Of Amphiphiles At Silica-Water Interfaces: Role Of Electrostatic Interactions, Van Der Waals Forces And Hydrogen Bonds, Yao Wu

LSU Doctoral Dissertations

The ability to explore and predict metastable structures of hybrid self-assemblies is of central importance for the next generation of advanced materials with novel properties. As compared to their thermodynamically stable forms, the kinetically stabilized materials show improved functionality potentially over their stable counterparts. The self-assembly processes usually originate from weak intermolecular interactions, involving a dynamic competition between attractive and repulsive interactions. These weak forces, including van der Waals (vdW), electrostatic interaction and the hydrogen bonding (H-bonding), can be tuned by external stimuli, e.g., confinement, temperature and ionization, and consequently driving hybrid materials into different configurations. It is challenging to …

Centrifugal Microfluidic Platform For Solid-Phase-Extraction (Spe) And Fluorescence Detection Applications, Yong Zhang

LSU Doctoral Dissertations

Solid phase extraction (SPE) is a widely used method to separate and concentrate the target molecules in liquid mixture. Traditional SPE has to be conducted in the laboratory with professional equipment and skilled operators. The microfluidic and 3D printing technology have opened up the opportunity in developing miniaturized automatic instruments. The main contribution of this research is to integrate the SPE process on a novel centrifugal platform. Various valves are applied on the platform to help control the aqueous sample and reagents in the cartridge.

First, a centrifugal microfluidic platform was built for automatically detecting trace oil pollution in water. …

A Modelling Study For Smart Pigging Technique For Pipeline Leak Detection, Caitlyn Judith Thiberville

LSU Master's Theses

Although leak incidents continue, a pipeline remains the most reliable mode of transportation within the oil and gas industry. It becomes even more important today because the projection for new pipelines is expected to increase by 1 billion BOE through 2035. In addition, increasing number and length of subsea tiebacks face new challenges in term of data acquisition, monitoring, analysis, and remedial actions. Passive leak-detection methods commonly used in the industry have been successful with some limitations in that they often cannot detect small leaks and seeps. In addition to a thorough review of related topics, this study investigates how …

Nonlinear Controller For Nonlinear Wave Energy Converters, David G. Wilson, Giorgio Bacelli, Rush D. Robinett Iii, Ossama Abdelkhalik

Michigan Tech Patents

The present invention is directed to a nonlinear controller for nonlinear wave energy converters (WECs). As an example of the invention, a nonlinear dynamic model is developed for a geometrically right-circular cylinder WEC design for the heave-only motion, or a single degree-of-freedom (DOF). The linear stiffness term is replaced by a nonlinear cubic hardening spring term to demonstrate the performance of a nonlinear WEC as compared to an optimized linear WEC. By exploiting the nonlinear physics in the nonlinear controller, equivalent power and energy capture, as well as simplified operational performance is observed for the nonlinear cubic hardening spring controller …

Facile Synthesis Of Nitrogen-Doped Graphene-Like Active Carbon Materials For High Performance Lithium-Sulfur Battery, Quan-Hua Meng, Wen-Wen Deng, Chang-Ming Li

Journal of Electrochemistry

Lithium-sulphur (Li-S) battery is regarded as a promising energy storage device because of its high theoretical capacity. However, the low S utilization and short cycling life limit the commercial applications. In this work, nitrogen-doped graphene-like carbon (NGC) materials were synthesized by simply pyrolyzing and carbonizing the mixture of melamine (C₃H₆N₆) and L-cysteine (C₃H₇NO₂S). The graphene-like structure in NGC effectively buffered the volume change of S during the discharge/charge process and improved the cycling stability. Meanwhile, nitrogen-containing functional groups in NGC facilitated the transportation of ions and suppressed the …

Electrochemical Engineering Of Carbon Nanodots, Lei Bao, Dai-Wen Pang

Journal of Electrochemistry

Aqueous batteries have been considered to be a competitive candidate for large-scale energy storage. However, most of aqueous batteries adopt inorganic electrode materials with metallic elements, which are based on the reversible insertion of metal ions, making their application being highly hindered by limited cycle life, environmental issue, high cost and low reserves. On the other hand, organic electrode materials offer the advantages of abundant reserves, tunable structures, renewability and environmental benignity. Furthermore, the wide internal space enables these organics to flexibly store various charge carriers. Organics have been investigated as the alternative to inorganic electrode materials. Herein, we review …

Porous-Electrode Theory Of Lithium Ion Battery: Old Paradigm And New Challenge, Xiao-Xiao Wang, Zi-Rui Zhou, Qiang Shan, Zeng-Ming Zhang, Jun Huang, Yu-Wen Liu, Sheng-Li Chen

Journal of Electrochemistry

A critical review on the porous electrode theory developed by Newman and his colleagues is presented. We propose several ideas for further development of this theory by analyzing its limitations. The classical Newman theory does not consider ion steric effect in describing ion transport in electrolyte solutions, which can be amended by a newly developed ion-vacancy coupled charge transfer model for ion transport in concentrated solutions. Ion transport in solid particles of active materials is essentially an ion-electron coupled transport process, and its rationality is verified by comparing the calculated and experimental diffusion coefficients of Li ⁺ ion in intercalation …

Progress And Prospects On Multifunctional Coating Separators For Lithium-Sulfur Battery, Zhuang-Zhuang Wei, Nan-Xiang Zhang, Feng Wu, Ren-Jie Chen

Journal of Electrochemistry

The development of advanced energy storage systems is crucial to meet the growing demand for electric vehicles, portable devices and renewable energy storage. Lithium-sulfur (Li-S) batteries, with their advantages of high specific energy, low cost of raw materials and environmental friendliness, are hotspots in the research field of new high performance batteries. However, there are still many problems which hinder the practical applications of lithium-sulfur batteries, such as the shuttle effect of soluble polysulfide intermediates, the growth of lithium dendrites, and the thermal stability and safety of lithium-sulfur batteries during use. The design of multifunctional coating separator is one of …

Licoo2 As Sulfur Host To Enhance Cathode Volumetric Capacity For Lithium-Sulfur Battery, Lu Wang, Xue-Ping Gao

Journal of Electrochemistry

Lithium-sulfur battery is one of the most promising secondary battery systems due to its super high theoretical gravimetric and volumetric energy densities (2600 Wh·kg^-1 and 2800 Wh·L^-1, respectively). However, the practical volumetric capacity of sulfur cathode is still unsatisfied due to the overuse of low-density host materials, such as carbon nanomaterials. Herein, commercial LiCoO₂ with the high tap density of 2.94 g·cm^-3 was used as the host material to build high density sulfur-based composite and compact electrode for increasing the volumetric capacity. Obviously, the tap density of the as-prepared S/LiCoO₂ composite was 1.90 g·cm …

Research Progress Of Key Components In Lithium-Sulfur Batteries, Jia-Jia Chen, Quan-Feng Dong

Journal of Electrochemistry

Due to the much higher theoretical specific capacity and energy density than the ones of traditional lithium ion battery, Li-S batteries have long been at the pinnacle in the realms of high-energy Li-metal batteries. However, the complicated electrochemical reactions on the sulfur cathode and Li anode, induced by the thermodynamic and kinetic behaviors of lithium polysulfides, are the intrinsic bottleneck to realize the full potential of Li-S batteries for practical application. In this review, we firstly discuss the roles, and thermodynamic and kinetic behaviors of polysulfides in the charging and discharging processes of Li-S batteries. Then, the functional design and …

A Model For The Anodic Carbonization Of Alkaline Polymer Electrolyte Fuel Cells, Qi-Hao Li, Ying-Ming Wang, Hua-Long Ma, Li Xiao, Gong-Wei Wang, Jun-Tao Lu, Lin Zhuang

Journal of Electrochemistry

The alkaline polymer electrolyte fuel cell (APEFC) has made appreciable progress in recent years but is still suffering performance loss during discharge with air as the oxidant. Several theories have been suggested to interpret the loss. However, efforts are still needed to reach a clear quantitative understanding. Based on the major experimental findings in combination with thermodynamics and kinetics of the reactions involved in the anode, this paper presents a model featuring layered carbonization in the anode and relevant grouped equations. The simulation results generated from the latter are compared with experiments, and possible principles to suppress the performance loss …

Research Progress Of Sulfur Cathode Catalytic Conversions For Lithium-Sulfur Batteries, Qin-Jun Shao, Jian Chen

Journal of Electrochemistry

The electrochemical reduction of sulfur (S) takes place through multistep reactions when S is used as a cathode material. The complete discharge of S to form final product lithium sulfide (Li₂S) is a two-electron reaction. The formation of low-order lithium polysulfides (LiPS) needs to overcome certain energy barriers. And the reduction of Li₂S₂ to Li₂S is the rate-limited step. The reaction kinetic of sulfur cathode is the critical key to determine the electrochemical performance of Li-S batteries, such as specific energy, specific power and low temperature performance, etc. Accelerating the rate-limited step kinetics …

Liquid Metal Electrodes For Electrochemical Energy Storage Technologies, Hao-Miao Li, Hao Zhou, Kang-Li Wang, Kai Jiang

Journal of Electrochemistry

Electrochemical energy storage technologies (ESTs) with low cost, long lifespan and high safety are of great importance for efficient integration of renewable energy into the grid. Liquid metal electrodes (LMEs) possessing the merits of high electronic conductivity, easy manufacture and amorphous structure is of great application value in the field of energy storage batteries. During charge-discharge processing, the LMEs could avoid the issues of structural deformation and dendrite growth in solid metal electrodes, which could effectively extend the cycle life of the LME based batteries. Moreover, LME based batteries are easy to be scaled up and less expensive, which are …

Porous Electrodes In Electrochemical Energy Storage Systems, Wei-Xiao Ji, Gong-Wei Wang, Qiang Wang, Li-Jun Bai, De-Yang Qu

Journal of Electrochemistry

Professor C.S. Cha was among the pioneers who have introduced modern electrochemistry to China. Under his leadership, the electrochemical research group in Wuhan University became one of the global powerhouses in fundamental and applied electrochemical researches. During the past many decades, Professor Cha and his colleagues in the university have educated and trained many students who have become part of the backbone of electrochemistry worldwide. In this review, we demonstrate the solid foundation laid by Professor Cha and his colleagues in Wuhan University, and the advancements made in the area of porous electrodes by the authors. All the authors in …

Highly Efficient Co2 Utilization Via Molten Salt Co2 Capture And Electrochemical Transformation Technology, Bo-Wen Deng, Hua-Yi Yin, Di-Hua Wang

Journal of Electrochemistry

The molten electrolytes exhibit high CO₂ absorption capacities, wide electrochemical windows and excellent reaction kinetics, which are promising electrolyte candidates for efficient capture and electrochemical conversion of high-flux CO₂ driven by renewable and clean electricity sources. This short review introduces the recent advancements of CO₂ electroreduction achieved by the authors using molten salt CO₂ capture and electrochemical transformation (MSCC-ET) technology, involving CO₂ absorption kinetics, cathodic kinetics, controllable synthesis of carbon products with unique nanostructures, development of inert oxygen evolution anodes and CO₂ conversion efficiency as well as energy efficiency. The challenges and prospects are …

Advances In The Application Of Biomimetic Surface Engineering In The Oil And Gas Industry, Yanbao Guo, Zheng Zhang, Siwei Zhang

Friction

Friction is widespread in almost every field in the oil and gas industry, and it is accompanied by huge energy losses and potential safety hazards. To deal with a series of questions in this regard, biomimetic surfaces have been developed over the past decades to significantly reduce economic losses. Presently, biomimetic surface engineering on different scales has been successfully introduced into related fields of the oil and gas industry, such as drill bits and the inner surfaces of pipes. In this review, we focused on the most recent and promising efforts reported toward the application of a biomimetic surface in …