Digital Commons Network^™

Simulation Of Inpatient Medical Critical Events For Physicians At A Community Hospital, Michael S. Yoo, Derek J. Ochi, Susan J. Doolittle, Carrie M. Griffith

Journal of Community Hospital Internal Medicine Perspectives

Background: Critical events are common at community hospitals, yet physicians who lead them have had varying levels of training and involvement during their residency and professional development. Little is known about the impact of simulation to improve performance during inpatient critical events among community hospitalist physicians. Objectives: To determine if hospitalist physicians reported sustained performance improvement regarding critical events as a result of simulation. Methods: Physicians at a community hospital in Northern California participated in critical event simulation over one year. Self-assessment surveys (scale 1 through 5) were collected before, after, and at 1-month post-simulation. Differences in survey scores and …

Development Of A Community Hospital Medicine Affiliated Inpatient Rotation For Family Medicine Residents - A Collaborative Success, David M. Gallagher, Anthony J. Viera, William E. Bynum, Poonam Sharma, John W. Ragsdale, Jeffrey Eschbach, Lalit Verma

Journal of Community Hospital Internal Medicine Perspectives

Background: Hospitalists perform key roles as inpatient educators for family medicine residents. For the past decade, Duke University Family Medicine Residency Program had its inpatient family medicine resident rotation at non-Duke facilities.

Objective: The authors describe the steps taken in 2020 to develop an inpatient Duke family medicine rotation at a North Carolina community hospital, Duke Regional Hospital, and provide outcomes data.

Methods: Duke Family Medicine Residency and Duke Regional Hospital Medicine collaborated in addressing key issues to develop an inpatient rotation for family medicine residents. Performance metrics of patients cared for by both the family medicine inpatient resident team …

11th Anniversary Of Jchimp, Robert Ferguson, Richard Alweis, Gillian Junker

Journal of Community Hospital Internal Medicine Perspectives

No abstract provided.

Leverage Topology Optimization To Maximize Structure Design Efficiency, Teng Li, Saad Aqerrout

ME 4233/6233 Fundamentals of FEA

This paper presents the topology optimization method to improve the efficiency of mechanical structure design.

Computational Mechanics Implementation Of Performance Based Testing In Massive Concrete Structures, Gabriel Y. Riveros

ME 4233/6233 Fundamentals of FEA

Most of the nation’s critical water resource infrastructures are near or have exceeded their design lives. Consequently, there is a huge need for the development of assessment procedures that will change the way dams are maintained and operated with the intent of extending the service life. This is crucial for ensuring the safety and security of our nation’s public services. The combination of advanced computational mechanics and performance based testing (PBT) methods can be used to investigate the existing conditions of large concrete structures.

Performance based testing (PBT) is a new and innovative non-destructive testing technique that we are implementing …

Comparison Of Johnson-Cook And Linear Elastic-Perfectly Plastic Material Models For Ballistic Impact Case, Logan J. Callahan, Marella Failla, Harrison Williams

ME 4233/6233 Fundamentals of FEA

In an effort to characterize the linear elastic-perfect plastic (J2) and Johnson-Cook (JC) Strengthening and Damage material models for an Aluminum target material being struck by a steel penetrator, finite element analysis (FEA) will be used to simulate the residual velocities from ballistic impacts, using various velocities of the penetrator. The object is to define the point at which the J2 material model is no longer accurate and therefore requires the use of the JC material models.

Numerical Analysis Of Taylor Impact With Various Nose Shapes, Jean C. Santiago Padilla, Erik M. Chappell

ME 4233/6233 Fundamentals of FEA

The Taylor impact test is an experimental technique used to determine dynamic material response and to validate constitutive models used in numerical simulations. It generally consists of shooting a cylinder rod of a select material against a rigid target at different velocities. After impact, the plastic deformation of the cylinder is recorded and is directly compared to numerical predictions. Another application for Taylor impact was proposed by Li et al. (2021) where the nose shape of the cylinder is modified to create different loading environments that can test electronic equipment in penetration weapons. FEA models where designed in ABAQUS/Explicit to …

Improving Feedforward Controls To Improve Npd Portfolio Performance – An Empirical Study, Mark H. Baker, Mike Bourne

Engaged Management ReView

Managers making crucial project selections in large, fast-changing project portfolios face the challenge of balancing the tension between control (performance) and creativity (experimentation/innovation). To better manage this challenge and to improve performance, some practitioners and scholars have considered the application of more sophisticated feedforward controls in new product development portfolio project selections. However, empirical studies of changes in the sophistication of such controls and of their influence on performance are lacking. We use an engaged scholarship approach and an action research methodology in a large international organization with multiple business units to study the post-intervention changes in applied controls and …

The Influence Of Regulatory Oversight On Environmental, Social, And Governance Ratings, John F. Torpey

Engaged Management ReView

Firm performance in the specific areas of environmental stewardship, social responsibility, and corporate governance (ESG) has become an important criterion that investors use in determining a firm’s value. This empirical investigation, based on stakeholder theory examines the relationship between regulatory oversight and third-party ESG ratings. Our research methodology involved quantitative, observational, and retrospective analyses. The study population consisted of 471 firms from two heavily regulated industry sectors—the utility and financial sectors—and from two less regulated sectors—the information technology and consumer discretionary sectors. We compiled the ESG ratings for the firms from two independent rating services. The quantitative evaluation included multiple …

Journal Of South Carolina Water Resources

Journal of South Carolina Water Resources

The Journal of South Carolina Water Resources (JSCWR) is dedicated to scientific research and policy to meet the growing challenge of providing water resources for the sustainable growth of South Carolina’s economy while preserving its natural resources. This special issue focuses on Water Quality and Public Health and is sponsored by the federally funded Center for Oceans and Human Health and Climate Change Interactions (COHHC² I) at the University of South Carolina (UofSC). In addition to UofSC researchers, the COHHC² I involves researchers, students, and other participants from Baylor University, The Citadel, College of Charleston, Rutgers University, University …

A Model For Equity In Arts Education For Youth In Greater Portland, Maine, Catherine Scheirer

Thinking Matters Symposium

Time and time again, by providing an outlet that allows innate human creativity to roam free, participation in arts activities such as dance, music, theatre, and visual arts is proven to have significant positive impacts on participants, regardless of age, experience, or background. Even though the arts have been acknowledged as critical for mental, physical, and emotional health, especially for children and adolescents, research has found that providing arts education in an equitable and culturally appropriate way is fraught with barriers. In addition, certain areas of the arts have seen a downward trend in educational priority and availability. My project …

Analysis Of Preload In Bolted Joints Under Impulse, Albert Dusseault

Thinking Matters Symposium

From transportation to storage to construction, bolted joints are utilized everywhere. Bolted joints in closures such as pressure vessels/tanks require a preload, or a specific amount of tightening of the bolts to seal the vessel when pressurized to avoid leaking. Low preload can result in joint loosening whereas high preload can result in yielding. Therefore, finding feasible and even better optimal values of preload is of great practical importance. In an earlier work in 1996, this problem was tackled with an exponentially decaying pressure applied on a pressure vessel closure. In the present analysis, however, the pressure variation is considered …

A Review Of The Effect Of Hla Genotype On Covid-19 Severity, Natalie Chalfant

Thinking Matters Symposium

No abstract provided.

Identifying The Support Women Entrepreneurs In Rural Maine Need From Each Other And Their Communities To Thrive, Lisa Luken

Thinking Matters Symposium

Rural women entrepreneurs have the power to positively impact the sustainability of their communities, yet they are faced with internal and external challenges in their pursuits to grow successful businesses and create sustainable livelihoods. While a number of scholars in the past 10 years investigated these challenges and suggested some solutions, more research is needed to identify additional solutions, including those specifically relevant to rural Maine communities. This qualitative study explored the support women entrepreneurs in rural Maine need from each other and their communities to thrive. Data gathered through semi-structured interviews with eleven women entrepreneurs from rural Maine revealed …

3d Printing Of Piezoelectric Materials And Devices, Dominic Polletta, Zack Myrtle

Thinking Matters Symposium

The design goal of the project is to use a stock 3D printer to 3D print materials with piezoelectric properties by adding Barium Titanate nanoparticles to the UV resin. The result of the printed material will be a device that will produce a charge when subjected to vibrations or stress. These printed devices can be used as microphones and other vibration sensors in a variety of applications. This process will be achieved by modifying the 3D printer by changing the film in the resin vat of the printer with a conductive film. This will allow for applied voltage to create …

Transgender Experiences In Healthcare, Paige Grover

Thinking Matters Symposium

No abstract provided.

Impacts Of Added Roughage On Growth Performance, Digestibility, Ruminal Fermentation, And Ruminal Ph Of Feedlot Steers Fed Wheat-Based Feedlot Diets Containing 30% Modified Distillers Grains With Solubles, Wayde J. Pickinpaugh, Bryan W. Neville, Rebecca L. Moore, Joel S. Caton

Roman L. Hruska U.S. Meat Animal Research Center: Reports

Two experiments were conducted to evaluate the inclusion rate roughage in wheat-based diets containing modified distillers grains with solubles (MDGS) on feedlot performance (Feedlot Experiment), as well as digestibility, ruminal pH, and ruminal fermentation characteristics (Digestibility Experiment). The feedlot experiment utilized 72 Angus steers (392 ± 46.3 kg initial body weight) which were randomly assigned to 1 of 12 pens, 3 pens per treatment, to evaluate feedlot performance and carcass characteristics. Dietary treatments were 1) control; 10% roughage, 2) 12% roughage, 3) 14% roughage, and 4) 16% roughage. The digestibility experiment used four ruminally and duodenally cannulated steers (393 ± …

Crisis Leadership Of Exemplary Superintendents Of Urban Elementary K–8 Districts During The Covid-19 Crisis Of 2020, Raymond Andry

Dissertations

Purpose: The purpose of this qualitative multiple-case study was to identify and describe strategies exemplary superintendents of urban elementary K–8 school districts in Los Angeles, Orange, Riverside, and San Diego counties used to lead in crisis using the five critical tasks of strategic crisis leadership (CTSCL; sense making, decision making and coordination, meaning making, accounting, and learning; Arjen Boin et al., 2017) during the COVID-19 pandemic of 2020. In addition, it was the purpose to understand and describe the experiences of exemplary leaders during a time of crisis.

Methodology: Through a qualitative multiple-case study, interviews were obtained to collect …

Sandstorm Spring 2022, Leslie Malland

Sandstorm: A Journal of Arts and Letters

Full Manuscript

Spring 2022 Commencement Program, University Of Alabama In Huntsville

Commencement Programs

No abstract provided.

Performance Comparison Between Relational And Non-Relational Databases In Tcms, Ahmad Yousef Imam

Honors Capstone Projects and Theses

No abstract provided.

Episode 23: Desiree Diaz: The Future Of Nursing, University Of Central Florida

Knights Do That Podcast Transcripts

In episode 23 — the ninth episode of season two of the UCF podcast, Knights Do That — we speak with Desiree Diaz, associate professor and undergraduate simulation coordinator in the UCF College of Nursing and president-elect of International Nursing Association of Clinical and Simulation Learning (INACSL). She shares how UCF is leading the charge in virtual reality education, how teaching students about cultural congruence can remove preconceived notions in patients and how simulation technology is paving the way for the future of nursing.

Sjsu Erfa Board Minutes, May 2, 2022, San Jose State University, Emeritus And Retired Faculty Association

SJSU ERFA Minutes

SJSU ERFA Executive Board Minutes

May 2, 2022

Introduction To The Culture Of The African Diaspora Aaf 202, Karen Morse

Library Impact Statements

No abstract provided.

Afrc Minutes 05/02/2022, Activity Fee Review Committee

Activity Fee Review Committee

No abstract provided.

Topological Changes In The Magnetic Field Of Lq Hya During An Activity Minimum, Jyri J. Lehtinen, Maarit J. Käpylä, Thomas Hackman, Oleg Kochukhov, Teemu Willamo, Stephen C. Marsden, Sandra V. Jeffers, Gregory W. Henry, Lauri Jetsu

Information Systems and Engineering Management Research Publications

Aims. Previous studies have related surface temperature maps, obtained with the Doppler imaging (DI) technique, of LQ Hya with long-term photometry. Here, we compare surface magnetic field maps, obtained with the Zeeman Doppler imaging (ZDI) technique, with contemporaneous photometry, with the aim of quantifying the star’s magnetic cycle characteristics.

Methods. We inverted Stokes IV spectropolarimetry, obtained with the HARPSpol and ESPaDOnS instruments, into magnetic field and surface brightness maps using a tomographic inversion code that models high signal-to-noise ratio mean line profiles produced by the least squares deconvolution (LSD) technique. The maps were compared against long-term ground-based photometry acquired with …

The Case For Oer As The Advancement Of Knowledge/Creative Expression, Amber Dierking, Matt Ruen, Steven Schlicker

Library Reports and Communication

The nature of scholarly and creative activity, at Grand Valley State University and across the higher education sector, is rapidly evolving. Amidst this ongoing transformation, the characteristics of OER – free access plus permission for adaptation – empower Grand Valley’s teacher-scholars to share their expertise with a global audience and simultaneously remove barriers to education for Lakers.

This memo, submitted for consideration by the University Academic Senate at GVSU, argues that the creation of OER can demonstrate several of the forms of scholarly activity described by Boyer (1990) as well as the criteria established for the Advancement of Knowledge or …

Smokejumper Obituary: Hoffman, Ray (Redmond 1967), National Smokejumper Association

Smokejumper Obituaries

No abstract provided.

2022 Commencement Ceremonies For Nova Southeastern University, Nova Southeastern University

NSU Commencement Programs

No abstract provided.

A Comment On Snyder, Contracting For Process, Larry T. Garvin

Law and Contemporary Problems

No abstract provided.