Power and Energy Commons^™

A New Formulation Of Time Boundary Integral Equation For Acoustic Wave Scattering In The Presence Of A Uniform Mean Flow, Fang Q. Hu, Michelle E. Pizzo, Douglas M. Nark

Mathematics & Statistics Faculty Publications

It has been well-known that under the assumption of a constant uniform mean flow, the acoustic wave propagation equation can be formulated as a boundary integral equation, in both the time domain and the frequency domain. Compared with solving partial differential equations, numerical methods based on the boundary integral equation have the advantage of a reduced spatial dimension and, hence, requiring only a surface mesh. However, the constant uniform mean flow assumption, while convenient for formulating the integral equation, does not satisfy the solid wall boundary condition wherever the body surface is not aligned with the uniform mean flow. In …

Second-Life Battery Electrochemical Impedance Spectroscopy Modeling And Application To A Residential System, Busra Ovali

Dissertations, Master's Theses and Master's Reports

This study presents the modeling of a used hybrid electric vehicle battery (also called second life battery), and its design and simulation for a standalone residential photovoltaic system. For this purpose, the battery was tested through capacity and electrochemical impedance spectroscopy tests (EIS). These tests were done with variable temperatures (0ºC, 15ºC and 30ºC), and results were used to fit an equivalent impedance circuit. This model was used to incorporate a second life battery to a PV system, which was simulated by using daily irradiance and load data for Tucson (AZ) under most various month (May).

Decision Process In Mcdm With Large Number Of Criteria And Heterogeneous Risk Preferences, Jian Liu, Hong Kuan Zhao, Zhao Bin Li, Si Feng Liu

Electrical and Computer Engineering Faculty Research & Creative Works

A new decision process is proposed to address the challenge that a large number of criteria in the multi-criteria decision making (MCDM) problem and the decision makers with heterogeneous risk preferences. First, from the perspective of objective data, the effective criteria are extracted based on the similarity relations between criterion values and the criteria are weighted, respectively. Second, the corresponding types of theoretic model of risk preferences expectations will be built, based on the possibility and similarity between criterion values to solve the problem for different interval numbers with the same expectation. Then, the risk preferences (Risk-seeking, risk-neutral and risk-aversion) …

Consensus Based Distributed Control In Micro-Grid Clusters, Syed Ahmed Fuad

Dissertations, Master's Theses and Master's Reports

With the increasing trend of utilizing renewable energy generators such as photovoltaic (PV) cells and wind turbines, power systems are transforming from a centralized power grid structure to a cluster of smart micro-grids with more autonomous power sharing capabilities. Even though the decentralized control of power systems is a reliable and cost effective solution, due to the inherent heterogeneous nature of micro-grids, optimal and efficient power sharing among distributed generators (DG’s) is a major issue which calls for advanced control techniques for voltage stabilization of the entire micro-grid cluster. The proposed consensus based algorithm in this thesis is a solution …

Real-Time Internal Temperature Estimation And Health Monitoring For Igbt Modules, Ze Wang

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Field experiences have demonstrated that power semiconductor devices, such as insulated-gate bipolar transistors (IGBTs), are among the most fragile components of power electronic converters. Thermomechanical stresses produced by temperature variations during operational and environmental loads are the major causes of IGBT degradation. As the devices are often operated under complex working conditions, temperature variations and the associated damage are difficult to predict during the converter design stage. A promising approach—online health monitoring and prognosis for power semiconductor devices—that can avoid device failure and effectively schedule maintenance has attracted much interest.

This dissertation research focused on real-time accurate internal temperature estimation …

Design Of Electrical Layout Of Offshore Wind Farms, Shirshak K. Dhali, Mahidhar Nandigam

Electrical & Computer Engineering Faculty Publications

The cost and efficiency of offshore wind farms are determined by a variety of factors which include the type of electrical system (AC or DC), transmission length, transmission voltage, rated power, wind turbine type, farm topology, and wind speed. Since the design variable space is large for such problems, computational optimization is necessary to find an optimal solution. This paper discusses a design methodology to determine the optimal values of components to minimize the cost of an offshore wind farm. The cost, loss, reliability models, and the application of geometric programing for optimization of the layout and configuration of an …

Minimum Time Control Of Paralleled Boost Converters, Shishir Patel

Dissertations, Master's Theses and Master's Reports

Demand for electrification is booming in both, traditional and upcoming generations of technological advancements. One of the constituent blocks of these electrified systems is Power conversion. Power conversion systems are often constructed by paralleling multiple power converter blocks for high performance and reliability of overall system. An advanced control technique is developed with an aim to optimize system states of heterogeneous power converters within minimum time while maintaining feasible stress level on individual power converter blocks. Practical implementation of real-time controller and performance improvement strategies are addressed. Experimental results validating high performance control scheme, and sensitivity analysis of system states …

Property Analysis Of Silylamine Type Reversible Ionic Liquids For Use As A Thermal Safety Switch In Batteries, Showmik Podder

Dissertations and Theses

The increased capacity of the modern battery system has also brought about safety apprehensions. Uncontrollable runaway reactions are a big concern in these systems; these reactions are the result of in situ heat generation and very much increase the risk of explosions and device failures. The concept of this work is to provide a preliminary understanding into the use of a type of switchable solvent known as reversible ionic liquids (RevILs) and their feasibility in being used in electrolytes as a thermally-controlled reversible safety switch. In their pure forms these switchable solvents experience a dramatic change in their properties upon …

A Hybrid State/Event Driven Communication-Based Control For Dc Microgrids, Yusef Esa

Dissertations and Theses

The U.S. electric power industry is undergoing unprecedented changes triggered by the growing electricity demand, and the national efforts to reduce greenhouse gas emissions. Moreover, there is a call for increased power grid resiliency, survivability and self-healing capabilities. As a result of these challenges, the smart grid concept emerged. One of the main pillars of the smart grid is microgrids. In this thesis, the technical merits of clustering multiple microgrids during blackouts on the overall stability and supply availability have been investigated.

We propose to use the existing underground distribution grid infrastructure, if applicable, during blackouts to form microgrid clusters. …

Nuclear Power: Black Sky Liability Or Black Sky Asset?, Sherrell R. Greene

International Journal of Nuclear Security

Ready access to abundant electricity is a key enabler of modern life. During the past decade the vulnerability of Critical Infrastructure sectors in the U.S. to a variety of natural hazards and man-made threats has become increasingly apparent. The electrical infrastructure (the “Grid”) is the foundation for all other critical civil infrastructures upon which our society depends. Therefore, protection of the Grid is an energy security, homeland security, and national security issue of highest importance. Geomagnetic disturbances (GMD) induced by solar coronal mass ejections (CMEs), electromagnetic pulse (EMP) attacks, and cyber attacks are three events having the potential to plunge …

Syntheses Of Ag@Pd@Pt Nanoparticles With Tunable Shell Thickness For Electrochemical Oxidation Of Formic Acid, Xiao-Dong Lin, Du-Hong Chen, Zhong-Qun Tian

Journal of Electrochemistry

In an effort to lower cost of a catalyst, the silver (Ag) core with palladium (Pd) layer then platinum (Pt) island (Ag@Pd@Pt) nanoparticles were synthesized and the electrocatalytic activity of Ag@Pd@Pt nanoparticles on formic acid was compared with that of Au@Pd@Pt nanoparticles reported previously. The results showed that the existence of a small amount of Pt could significantly improve the activity of the catalyst. When the surface coverage of Pt approached 0.5 monolayers, the activity of Ag@Pd@Pt nanoparticles reached the maximum. Though the onset potential of the electro-oxidation was slightly more positive (about 50 mV), the overall electrocatalytic activity of …

A Study On The Oxidation Of Hydrogen Peroxide At Au(111) And Au(100) Electrodes, Yong-Li Zheng, Jie Wei, Yan-Xia Chen

Journal of Electrochemistry

The oxidation reactions of hydrogen peroxide (H₂O₂) at Au(111) and Au(100) electrodes in 0.1 mol·L^-1 HClO₄ were investigated by using rotating disk electrode system. It was found that H₂O₂ could be readily oxidized to O₂ at both Au(100) and Au(111) surfaces with the onset potential close to its equilibrium potential. In contrast, the onset overpotential for H₂O₂ reduction was above 0.4 V, while the onset overpotential for H₂O₂ oxidation at Au(100) was ca. 0.1 V more negative than that at Au(111), this is probably …

Stm Investigation Of Oxygen Reduction Reaction On Solid Interface In Fuel Cell, Zhen-Feng Cai, Bing Sun, Wen-Jie Jiang, Ting Chen, Dong Wang, Li-Jun Wan

Journal of Electrochemistry

An electrocatalyst for oxygen reduction reaction (ORR) is an important component for fuel cells. An investigation at interfacial electrochemical reactions toward ORR at a molecular scale benefits mechanistic understanding as well as rational design of catalysts. Scanning tunneling microscopy (STM) has been proven to be a powerful tool to monitor chemical reactions and to provide in-situ information about the interfacial electrochemical reactions at a molecular level. This review summarizes the recent STM studies in monitoring the interface processes such as morphological changes, molecular changes, reaction intermediates, and oxidation products. The prospects of future development in this field are outlined.

Chitosan/Nonahydrate Gel Derived Fe-N-Doped Porous Carbon Sheet As High-Efficient Orr Electrocatalyst, Fan-Lu Meng, Xin-Bo Zhang, Jun-Min Yan

Journal of Electrochemistry

The chitosan/nonahydrate gel was used as a precursor to realize the uniform mixture of N-polymer and metal salt. After lyophilization treatment, the gel went through heat treatment and acid etch. Accordingly, the Fe-N-doped porous carbon sheet with homogenous composition and microstructure was prepared. Compared with the commercial Pt/C catalyst, the Fe-N-doped porous carbon sheet exhibited more positive onset potential and half-wave potential, higher current density, and especially, excellent durability. The power density of 318 mW·cm^-2 was obtained in alkaline fuel cell with the Fe-N-doped porous carbon sheet as a cathode catalyst, which is higher than 267 mW·cm^-2 with …

Synthesis Of Ultrathin Co3O4 Nanoflakes Film Material For Electrochemical Sensing, Hui-Juan Wang

Journal of Electrochemistry

Ultrathin cobalt oxide (Co₃O₄) nanoflakes film material was synthesized by using an electro-deposited cobalt layer as a raw material through a simple oxidation method and followed by a heat treatment at 350 ^oC. The physical characterizations of the Co₃O₄ nanoflakes film were performed by scanning electron microscopy (SEM), X-ray diffraction (XRD) and transmission electron microscopy (TEM) technologies, and the electrochemical activity was measured by cyclic voltammetry (CV). As a promising material for electrochemical sensing, the as-synthesized ultrathin Co₃O₄ nanoflakes film material exhibited excellent electrochemical activity for H₂O …

Lithium-Sulfur (Selenium) Batteries: Interface Issues And Solving Strategies, Nian-Wu Li, Ya-Xia Yin, Yu-Guo Guo

Journal of Electrochemistry

The stable interface is still a challenge for lithium-sulfur (selenium) batteries because of the low conductivity of sulfur (selenium), dissolution of polysulfide (polyselenide), volume expansion of sulfur (selenium), and lithium dendrite growth. This review describers some recent developments in lithium-sulfur (selenium) batteries and highlights our efforts in this field. The possible strategies for building stable interface in the lithium-sulfur (selenium) batteries including nano-restriction effect, chemical bonding, interface adsorption, surface coating, electrolyte optimization, and Lithium anode treatment have been discussed.

Lithium Plating Identification From Degradation Behaviors Of Lithium-Ion Cells, Jian-Bo Zhang, Lai-Suo Su, Xin-Yu Li, Hao Ge, Ya-Kun Zhang, Zhe Li

Journal of Electrochemistry

Lithium plating has huge impact on the lifetime and safety of lithium-ion cells. It is, therefore, necessary to identify lithium plating. In this study, the accelerated stress tests of lithium-ion cells were conducted under different conditions with multi-stress loads. Based on the different effects of the two major aging mechanisms, namely, SEI (Solid Electrolyte Interface) layer growth and lithium plating, on the degradation behaviors, two lithium plating identification methods of resistance-capacity plot and Arrhenius plot were employed. The experimental results revealed that the two identification methods are highly consistent with each other. Furthermore, the origins of capacity loss were distinguished …

Intrinsic Interfacial Property Between High-Voltage Lini0.5Mn1.5O4 Cathode And Electrolyte, Li Li, Jing-Jing Xu, Shao-Jie Han, Wei Lu, Li-Wei Chen

Journal of Electrochemistry

To obtain high energy density, developing high-voltage cathode materials is an effective approach. The cathode/electrolyte interface stability is the key factor for the cycle performance and safety performance of high-voltage lithium ion batteries. It is, therefore, of significant importance to study the stability of cathode/electrolyte interface. However, many reports have shown that at the cathode/electrolyte interface the cathodes were prepared by coating the mixture of active materials with a conductive additive and a binder on an Al current collector. The introduction of additives will interfere the surface morphology and component analyses, resulting in difficulty to acquire the intrinsic information at …

Fault Discrimination Algorithm For Busbar Differential Protection Relaying Using Partial Operating Current Characteristics, Monir Hossain

LSU New Orleans Theses and Dissertations

Differential protection is the unit protection system which is applied to protect a particular unit of power systems. Unit is known as zone in protection terminology which is equivalent to simple electrical node. In recent time, low impedance current differential protection schemes based on percentage restrained characteristics are widely used in power systems to protect busbar systems. The main application issue of these schemes is mis-operation due to current transformer (CT) saturation during close-in external faults. Researchers have suggested various solution of this problem; however, individually they are not sufficient to puzzle out all mis-operational scenarios. This thesis presents a …

Optimal Dg Placement: A Multimethod Analysis, Saiful A. Ratul

LSU New Orleans Theses and Dissertations

With Power System being restructured in the vision of Smart Grid, it is important now more than ever to find suitable locations to place Distributed Generators (DG). Distributed generators, which may be renewable, are not limited to specific locations as in the case of conventional generators. Several papers have been published that make suggestions on where the optimal location of DG should be in a system. Objectives ranging from loss minimization to total cost minimization have been the factor for such studies. In this study, a new method is introduced that hopes to improve a current system in three ways …