Electrical and Computer Engineering Commons^™

Separation Study Of Titanomagnetite Fe3-Xtixo4 From Natural Sand At Indramayu, West Java, Sunaryo Sunaryo, Iwan Sugihartono

Makara Journal of Technology

Separation Study of Titanomagnetite Fe3-xTixO4 from Natural Sand at Indramayu, West Java. Titanomagnetite FeTiO4 has been obtained from metal sand which is separated from natural sand at Indramayu using magnetic separator with the magnetic field 0,3 Tesla. This method can improve titanomagnetite content from 32% to 63,6%. According to X-ray diffractometer (XRD) and data processing by general structure analyses system (GSAS) with χ2= 1,454 and Wrp = 0,1142 as correction factor of the peak to peak intensities, we conclude that χ2 about 0 and Wrp aproximately 10%. It indicates the datas with the error merely 0,1 can be accepted. Furthermore, …

Hydrogen Absorption Induced Slow Crack Growth In Austenitic Stainless Steels For Petrochemical Pressure Vessel Industries, Ronnie Higuchi Rusli

Makara Journal of Technology

Type 304L and type 309 austenitic stainless steels were tested either by exposed to gaseous hydrogen or undergoing polarized cathodic charging. Slow crack growth by straining was observed in type 304L, and the formation of α‘ martensite was indicated to be precursor for such cracking. Gross plastic deformation was observed at the tip of the notch, and a single crack grew slowly from this region in a direction approximately perpendicular to the tensile axis. Martensite formation is not a necessary condition for hydrogen embrittlement in the austenitic phase.

Development Of Technology Parameter Towards Shipbuilding Productivity Predictor Using Cubic Spline Approach, Bagiyo Suwasono, Sjarief Widjaja, Achmad Zubaydi, Zaed Yuliadi, I Nyoman Budiantara

Makara Journal of Technology

Development of Technology Parameter Towards Shipbuilding Productivity Predictor Using Cubic Spline Approach. Ability of production processes associated with state-of-the-art technology, which allows the shipbuilding, is customized with modern equipment. It will give impact to level of productivity and competitiveness. This study proposes a nonparametric regression cubic spline approach with 1 knot, 2 knots, and 3 knots. The application programs Tibco Spotfire S+ showed that a cubic spline with 2 knots (4.25 and 4.50) gave the best result with the value of GCV = 56.21556, and R2 = 94.03%.Estimation result of cubic spline with 2 knots for the PT. Batamec shipyard …

Shaft Torsional Vibration Response Of Vertical Axis Ocean Current Turbine Model Due To Torque Excitation, Adi Wirawan Husodo, I Ketut Aria Pria Utama, I Made Ariana

Makara Journal of Technology

Shaft Torsional Vibration Response of Vertical Axis Ocean Current Turbine Model Due to Torque Excitation. The current research aimed to study the torsional vibration response of Vertical Axis Ocean Current Turbine due to randomly torque excitation pattern, owing to the variety of ocean current velocity. The turbine model is composed of 3 aluminum blades of NACA 0018 connected to steel shaft. Turbine dimensions are 10 cm of chord, 1.8 cm of chamber and 100 cm of span. The variation of ocean current velocity is 0.5 m/s, 1.0 m/s, 1.5 m/s, 2.0 m/s, 2.5 m/s and 3.0 m/s. The Model has …

Application Of Differential Evolution To Determine The Hepwm Angles Of A Three Phase Voltage Source Inverter, N Bahari, Z. Salam, Taufik

Electrical Engineering

This paper presents an efficient Differential Evolution (DE) based solution for harmonic elimination pulse-width modulation (HEPWM). The aim is to solve for the set of transcendental equations that determine the switching angles of the HEPWM waveform. The objective function of the DE is designed to minimize (to near zero) the selected harmonics and at the same time allows for the fundamental component of the output voltage to be controlled independently. To verify the method, simulation is carried out using MATLAB simulink. The computed switching angles are applied to a three phase voltage source inverter. Typical results are shown and discussed.

A Study Of The Lyapunov Stability Of An Open-Loop Induction Machine, Ahmed Oteafy, John Chiasson

Electrical and Computer Engineering Faculty Publications and Presentations

The induction motor is widely utilized in industry and exists in a plethora of applications. Until the last 20 years or so, it was primarily used in an open-loop fashion (i.e., balanced sinusoidal voltages, constant load torque and viscous friction) with its inherent stability counted on to allow operation over a wide range of operating conditions. Unlike classical arguments based on the steady-state torque-slip curve, a rigorous analytical stability argument using the full nonlinear dynamical model is presented. In particular, conditions for global asymptotic stability of the induction motor in the sense of Lyapunov are given in terms of the …

Designing A Photovoltaic System Hybrid For A Health Clinic In Camilo Ortega, Nicaragua, Jeremy Holliman

Electrical Engineering

As developing nations continue to foster the development of their technologies and economies, industrialized nations have taken an active approach in providing green and sustainable alternatives for them to consider. Non-profit organizations like Engineers Without Borders holds sustainable international development as paramount to all international projects that their student and professional chapters undertake. The Cal Poly Engineers Without Borders student chapter has implemented a variety of projects from slow sand filters to compressed earth blocks, and the Nicaragua team is in the process of designing a health clinic for the Camilo Ortega community. In order to power the health clinic, …

Fuzzy Logic Control Of An Inverted Pendulum Robot, Kyle Reid

Electrical Engineering

The inverted pendulum is a classical problem in controls.  The inherit instabilities in the setup make it a natural target for a control system.  Over the years it has been the benchmark for testing new and innovative control theories such as Fuzzy Logic.  During the course of this project a software fuzzy logic controller was implemented using a PIC microcontroller.  At the conclusion of the experiment an interesting realization was made about the nature of Fuzzy Logic and its applicability in the world of controls.

Signal/Power Integrity Analysis For Multilayer Printed Circuit Boards Using Cascaded S-Parameters, Francesco De Paulis, Yaojiang Zhang, Jun Fan

Electrical and Computer Engineering Faculty Research & Creative Works

A cascaded S-parameter method is proposed in this paper for signal/power integrity analysis of multiple vias in a multilayer printed circuit board (PCB). the proposed method enables efficient and accurate construction and simulation of physics-Based via model for complex multilayer PCB structures involving vias. the physics-Based via model describes the parasitic effects near each via region as well as mutual coupling among different vias. in this model, each via portion between two parallel plates is regarded as a three-port network with two coaxial ports and one radial port between the two plates. a procedure is first developed to obtain the …

Dynamic Response Improvement In A Buck Type Converter Using Capacitor Current Feed-Forward Control, Lisheng Shi, Mehdi Ferdowsi, Mariesa Crow

Electrical and Computer Engineering Faculty Research & Creative Works

The dynamic performance of dc-dc power electronic converters is mainly determined by the output filtering capacitor and inductor, control loop(s) compensator(s), and the voltage conversion ratio. Normally, a larger capacitance and/or a smaller inductance are not recommended because of the extra cost and size of the capacitor and/or the increment of the inductor current ripple. The capacitor current feed-forward method has gained popularity due its fast dynamic response, simpler structure, and less sensing losses. In applications where a large voltage conversion ratio is needed, dynamic response for a load step-down scenario is worse than that of a load step-up condition. …

Bandwidth-Efficient Frequency-Domain Equalization For Single Carrier Multiple-Input Multiple-Output Underwater Acoustic Communications, Jian Zhang, Yahong Rosa Zheng

Electrical and Computer Engineering Faculty Research & Creative Works

This paper proposes a single carrier (SC) receiver scheme with bandwidth-efficient frequency-domain equalization (FDE) for underwater acoustic (UWA) communications employing multiple transducers and multiple hydrophones. Different from the FDE methods that perform FDE on a whole data block, the proposed algorithm implements an overlapped-window FDE by partitioning a large block into small subblocks. a decision-directed channel estimation scheme is incorporated with the overlapped-window FDE to track channel variations and improve the error performance. the proposed algorithm significantly increases the length of each block and keeps the same number of training symbols per block, hence achieving better data efficiency without performance …

A Thermal Simulation Process Based On Electrical Modeling For Complex Interconnect, Packaging, And 3di Structures, Lijun Jiang, Chuan Xu, Barry J. Rubin, Alan J. Weger, Alina Deutsch, Howard Smith, Alain Caron, Kaustav Banerjee

Electrical and Computer Engineering Faculty Research & Creative Works

To reduce the product development time and achieve first-pass silicon success, fast and accurate estimation of very-large-scale integration (VLSI) interconnect, packaging and 3DI (3D integrated circuits) thermal profiles has become important. Present commercial thermal analysis tools are incapable of handling very complex structures and have integration difficulties with existing design flows. Many analytical thermal models, which could provide fast estimates, are either too specific or oversimplified. This paper highlights a methodology, which exploits electrical resistance solvers for thermal simulation, to allow acquisition of thermal profiles of complex structures with good accuracy and reasonable computation cost. Moreover, a novel accurate closed-form …

A Novel Real-Time Approach To Unified Power Flow Controller Validation, Keyou Wang, Mariesa Crow, Bruce M. Mcmillin, Stan Atcitty

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents the development of a real-time hardware/software laboratory to interface a soft real-time power system simulator with multiple unified power flow controllers (UPFC) via hardware-in-the-loop (HIL) to study their dynamic responses and validate control and placement approaches. This paper describes a unique laboratory facility that enables large-scale, soft real-time power system simulation coupled with the true physical behavior of a UPFC as opposed to the controller response captured by many other real-time simulators. The HIL line includes a synchronous machine, a UPFC, and a programmable load to reproduce the physical dynamics of the UPFC sub-network.

Bio-Inspired Algorithms For Autonomous Deployment And Localization Of Sensor Nodes, Raghavendra V. Kulkarni, Ganesh K. Venayagamoorthy

Electrical and Computer Engineering Faculty Research & Creative Works

Optimal deployment and accurate localization of sensor nodes have a strong influence on the performance of a wireless sensor network (WSN). This paper considers real-time autonomous deployment of sensor nodes from an unmanned aerial vehicle (UAV). Such a deployment has importance, particularly in ad hoc WSNs, for emergency applications, such as disaster monitoring and battlefield surveillance. the objective is to deploy the nodes only in the terrains of interest, which are identified by segmentation of the images captured by a camera on board the UAV. Bioinspired algorithms, particle swarm optimization (PSO) and bacterial foraging algorithm (BFA), are presented in this …

Mas Pole Location And Effective Spatial Bandwidth Of The Scattered Field, James Richie

Electrical and Computer Engineering Faculty Research and Publications

The concept of effective spatial bandwidth (EBW) is introduced for periodic domains. The EBW is applied to the incident and scattered fields along the boundary of an infinite circular cylinder. The scattered field is formulated using the method of auxiliary sources (MAS). In MAS, monopoles on an auxiliary surface (AS) are used to model the scattered field. It is shown that the EBW of the incident field can provide some insight regarding the placement of poles for the MAS scattered field model. Example simulations are provided to demonstrate the usefulness of EBW with respect to monopole placement rules in MAS.

A Parallel Histogram-Based Particle Filter For Object Tracking On Simd-Based Smart Cameras, Henry Medeiros, Germán Holguín, Paul J. Shin, Johnny Park

Electrical and Computer Engineering Faculty Research and Publications

We present a parallel implementation of a histogram-based particle filter for object tracking on smart cameras based on SIMD processors. We specifically focus on parallel computation of the particle weights and parallel construction of the feature histograms since these are the major bottlenecks in standard implementations of histogram-based particle filters. The proposed algorithm can be applied with any histogram-based feature sets—we show in detail how the parallel particle filter can employ simple color histograms as well as more complex histograms of oriented gradients (HOG). The algorithm was successfully implemented on an SIMD processor and performs robust object tracking at up …

A Single-Chip Ultra-Wideband Based Wireless Sensor Network Node, Nathan R. Schemm

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

This dissertation presents the design of a next-generation wireless sensor network node. The node incorporates many new and innovative technologies such as an ultra-wideband radio which allows very low-energy communication, a low-power radiation detection front end, and an efficient implementation of dynamic voltage scaling which improves the energy efficiency of the integrated processor. The complete design is integrated on a single chip for maximum power savings and minimal size.

The ultra-wideband transceiver includes many novel techniques to produce a receiver with low power consumption and fast and accurate packet acquisition and reception. These include the use of a standard symmetric …

Analysis And Simulations Of Z-Source Inverter Control Methods, B. Y. Husodo, M. Anwari, S. M. Ayob, Taufik

Electrical Engineering

In this paper, two different control methods for Z-source inverter are examined. The Simple Boost and the Maximum Boost control methods of the inverter are analyzed and compared each other using simulation with MATLAB/Simulink. The Simple Boost control with independence relation between modulation index and shoot-through duty ratio is also simulated and analyzed. The selection of high modulation index and shoot-through duty ratio can reduce the inverter’s dc link voltage overshoot and increasing power delivery capacity of the inverter.

Effects Of Variable Solar Irradiance On The Reactive Power Compensation For Large Solar Farm, Dustin F. Howard, Ronald G. Harley, Jiaqi Liang, Ganesh K. Venayagamoorthy

Electrical and Computer Engineering Faculty Research & Creative Works

Dish-Stirling systems are a form of concentrating solar power (CSP) emerging as an efficient and reliable source of renewable energy. Various technical hurdles are involved in the grid interconnection of dish-Stirling systems, particularly with issues related to power factor correction, low voltage ride-through capability, and reactive power planning. While there are no grid-interconnection requirements specific to dish-Stirling technology, the requirements currently established for wind farms are used as a starting point due to the similar design and operating characteristics between wind farms and dish-Stirling solar farms. a dish-Stirling solar farm requires external reactive power compensation to meet the power factor …

Estimation Of Voltage Stability Index In A Power System With Plug-In Electric Vehicles, K. Joseph Makasa, Ganesh K. Venayagamoorthy

Electrical and Computer Engineering Faculty Research & Creative Works

A Multilayer Perceptron (MLP) neural network-based approach for estimation of the voltage stability L-index in a power system with Plug-in Electric Vehicles (PEVs) is presented. This technique overcomes the limitations of direct calculation of L-index from measurements at a load bus. the L-index calculation is dependent upon the no-load voltage phasor for any given system topology and operating condition. in practice it is difficult to obtain no-load voltage phasor at a bus each time the system topology or operating point changes. an MLP neural network-based method capable of estimating voltage stability L-index at a load bus using direct measurements and …